Problem registering with ULN

I tried to register a server with uln and the registration failed for some more other reason.
I tried to run the registration again. It says: the system is already registered. But I don't see it under systems on the ULN Webpage.
When I try to run up2date it tells me: Authorization required.
With my other servers the registration went fine.
Any ideas? I unfortunately only purchased network support.
Regards
Christian

Please email me privately about this. Click on my name (to the left) to get my email address.
I'll need your CSI number, login name, and the name of the machine you registered.
If you can enclose "/etc/sysconfig/rhn/up2date-uuid" that would be good also.
Cheers

Similar Messages

Problem registering with the iOS developer program

Hello I registered for the iOS developer program, I paid the membership this was 48 hours ago but I still haven't got a reply, why is this?
This is my order number
W244164087
Thanks and regards.

Hello. I have problem with IOS Dev program too. Yesterday i paid 99$ from mastercard, but my mail is empty, License Status - expect payment ...
I can not find anywhere to contact on this issue

Problem Registering with Shared Services

Hi all.
I have this problem:
I'm installing Hyperion 11.1.1.3. I installed and configured Shared Services in server "sa02". I installed Essbase in "bd01" and registered fine to Shared Services. But, when I'm trying configure EAS (in "sa02"), it can't registered to Shared Services.
I have this error in $HYPERION_HOME/logs/config/configtool_err.log
com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Unable to connect to Shared Services, make sure the Shared Services server is running and try again.
Shared services is deployed into OAS and I can login good. Ldap is running.
Any suggestion?
Thanks in advance.
Jordi Lopez

Hi.
The operating system of all servers is Solaris 10.
Thanks.

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem?

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.

It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

Since updating to iTunes 11.1.4(62) both my iPhone 5 and iPad Air do not sync.hen I plug them into my lap top directly, using the USB cord, they don't even register with iTunes as being present. I am completely stumped. I had no problem before.

When I plug my iPhone or iPad directly into my lap top, using the USB cord, the devices don't even register with iTunes as being present. I am completely stumped. I believe this bagan with my last iTunes update. The last time I syced any device was Oct 23, 2013. During that time I bought two new apple products and the same problem, when I plug them in they do not even show up as being available to sync. Any ideas why this is happening?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

I had an issue when trying to register with the forums, but I am having problems speaking someone because I am not a "registered" member?

Dear forum member(s), I was excited at the possibilities that Firefox offered. I have been looking forward to researching on the forums, but I made a blunder when registering.
I changed my email password some time ago and forgot that I had done so. I also have a second email which is similar to my address I was registering and I think I was actually using my the second email information until I caught the mistake.
Shortly thereafter I received an email with my user ID but no password. I had been assuming that I would receive a onetime computer generated password, but I wasn’t sure how things were supposed to go. After closely studying the language of the email, I was led to the conclusion that I would login with my original information I had provided.
My final attempt to register failed and I can’t explain why. I am positive that I had the right user id and password and now I am in limbo. I registered with the "Add-ons" section in 15 minutes. I was never told I was banned, but I was never told I am now a member. Thanks for reading.
Sincerely,
reel4

Not at all. I have never posted to the forums. The only thing I have written is what you see in this thread. I registered at add-ons section and things were fine. I wanted to use the forums, because I like to learn what I can. The problems began when I tried to register at the forms. At first, I thought my login from add-ons would work at the forums. It didn't. I honestly don't know if there is separate login and validation for each firefox/mozilla section.
When I attempted to register with the forums, I messed up when trying to login because I made too many attempts. I was either using another password from a second email or I misread those weird words they use to make sure you are not a bot.
I don't know what exactly was written but they basically wanted to take a look at things. I felt that was reasonable. After all - I felt like a moron for not being able to read those contorted word tests.
Then they sent me my user id but with no new password so I assumed my current password was the same as the one I originally gave. Long story short, I tried to login again- all three times I failed. They never banned me or told me anything. I have not heard from anyone or thing. To It's like they have just walked away. I just don't understand what has happened and why no one will tell me anything. So... no - I am not banned. When I do bet blocked after I logoff, it has the same effect as a ban. I guess I have been ousted. I just wish this I could get this matter resolved. I changed my password and email so maybe that will keep around.
It's a strange situation and I am at loss for words. I even wrote the forum people an apology letter describing the facts above in details and apologizing for the inconvenience. I actually apologized for being an idiot.
One last thing - at the outset of the post - I told you they gave me one last opportunity to login and it failed. I know for a fact I had the information correct. I had even written my password somewhere else on the screen to where I could see each character to verify the pass word was correct and then cut and paste.
James - who knows what the future holds but I must thank you my friend. At the very least, I could tell my story. It is all so strange.

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

S9 BI + register with Shared services Problems

Hi,
I am tring to register BI+ using COnfiguration Utility, but when I register with Shared Services, the registration does not work and the follow message has written in the log:
(Jun 9, 2008 2:36:05 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Authenticate Admin user to CSS.
(Jun 9, 2008 2:36:05 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Creating CMS Client SDK
(Jun 9, 2008 2:36:05 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Registering the product, HAVA-9.3.0
(Jun 9, 2008 2:36:06 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Successfully registered the product, HAVA-9.3.0
(Jun 9, 2008 2:36:06 PM), Install.product.install, com.hyperion.cis.config.CmsRegistrationUtil, dbg, Registering the application, 0000011a5e928300-0001-05f1-64000441
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.RunAllTasksWizardAction, err, java.lang.Exception: Adding following Apps to Project failed : '0000011a5e928300-0001-05f1-64000441.HAVA;'.
STACK_TRACE: 6
java.lang.Exception: Adding following Apps to Project failed : '0000011a5e928300-0001-05f1-64000441.HAVA;'.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:199)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:302)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:119)
     at com.installshield.wizard.RunnableWizardBeanContext.run(RunnableWizardBeanContext.java:21)
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hfmUpgradeTask not selected, skipping panel hfmUpgradePanel
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hfmConfigureTask not selected, skipping panel hfmLaunchConfig
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hfmBPMATask not selected, skipping panel hfmBPMAInstance1
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hfmBPMATask not selected, skipping panel hfmBPMAInstance2
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, msg1, Task hfmBPMATask not selected, skipping panel hfmBPMARunPanel
(Jun 9, 2008 2:36:14 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductCustomInputPanel, dbg, managerClassName: com.hyperion.avalanche.config.UpgradeSummaryPanelManager
(Jun 9, 2008 2:36:24 PM), Install.product.install, com.hyperion.cis.config.wizard.CustomSummaryPanel, dbg, CustomSummaryPanel in queryExit
(Jun 9, 2008 2:36:25 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, queryEnter method is entered
(Jun 9, 2008 2:36:25 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, Checking OS type/version/architecture against system requirements...
(Jun 9, 2008 2:36:25 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.name:Windows 2003
(Jun 9, 2008 2:36:25 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.version:5.2
(Jun 9, 2008 2:36:25 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, os.arch:x86
(Jun 9, 2008 2:36:25 PM), Install.product.install, com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, dbg, major os version #:5; minor os version #: 2
Can anybody help me ?
Thanks

Hi did you get a resolution to this ? I'm experiencing the same issue.
Thanks.
Hi,
I am tring to register BI+ using COnfiguration
Utility, but when I register with Shared Services,
the registration does not work and the follow message
has written in the log:
(Jun 9, 2008 2:36:05 PM), Install.product.install,
com.hyperion.cis.config.CmsRegistrationUtil, dbg,
Authenticate Admin user to CSS.
(Jun 9, 2008 2:36:05 PM), Install.product.install,
com.hyperion.cis.config.CmsRegistrationUtil, dbg,
Creating CMS Client SDK
(Jun 9, 2008 2:36:05 PM), Install.product.install,
com.hyperion.cis.config.CmsRegistrationUtil, dbg,
Registering the product, HAVA-9.3.0
(Jun 9, 2008 2:36:06 PM), Install.product.install,
com.hyperion.cis.config.CmsRegistrationUtil, dbg,
Successfully registered the product, HAVA-9.3.0
(Jun 9, 2008 2:36:06 PM), Install.product.install,
com.hyperion.cis.config.CmsRegistrationUtil, dbg,
Registering the application,
0000011a5e928300-0001-05f1-64000441
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.RunAllTasksWizardAction
, err, java.lang.Exception: Adding following Apps to
Project failed :
'0000011a5e928300-0001-05f1-64000441.HAVA;'.
STACK_TRACE: 6
java.lang.Exception: Adding following Apps to Project
failed :
'0000011a5e928300-0001-05f1-64000441.HAVA;'.
at
t
com.hyperion.cis.config.CmsRegistrationUtil.registerAp
plication(CmsRegistrationUtil.java:199)
at
t
com.hyperion.cis.config.wizard.RunAllTasksWizardAction
.executeHubRegistrationTask(RunAllTasksWizardAction.ja
va:302)
at
t
com.hyperion.cis.config.wizard.RunAllTasksWizardAction
.execute(RunAllTasksWizardAction.java:119)
at
t
com.installshield.wizard.RunnableWizardBeanContext.run
(RunnableWizardBeanContext.java:21)
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductCustomInputPanel
, msg1, Task hfmUpgradeTask not selected, skipping
panel hfmUpgradePanel
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductCustomInputPanel
, msg1, Task hfmConfigureTask not selected, skipping
panel hfmLaunchConfig
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductCustomInputPanel
, msg1, Task hfmBPMATask not selected, skipping panel
hfmBPMAInstance1
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductCustomInputPanel
, msg1, Task hfmBPMATask not selected, skipping panel
hfmBPMAInstance2
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductCustomInputPanel
, msg1, Task hfmBPMATask not selected, skipping panel
hfmBPMARunPanel
(Jun 9, 2008 2:36:14 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductCustomInputPanel
, dbg, managerClassName:
com.hyperion.avalanche.config.UpgradeSummaryPanelManag
er
(Jun 9, 2008 2:36:24 PM), Install.product.install,
com.hyperion.cis.config.wizard.CustomSummaryPanel,
dbg, CustomSummaryPanel in queryExit
(Jun 9, 2008 2:36:25 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductTaskSelectionPan
el, dbg, queryEnter method is entered
(Jun 9, 2008 2:36:25 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductTaskSelectionPan
el, dbg, Checking OS type/version/architecture
against system requirements...
(Jun 9, 2008 2:36:25 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductTaskSelectionPan
el, dbg, os.name:Windows 2003
(Jun 9, 2008 2:36:25 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductTaskSelectionPan
el, dbg, os.version:5.2
(Jun 9, 2008 2:36:25 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductTaskSelectionPan
el, dbg, os.arch:x86
(Jun 9, 2008 2:36:25 PM), Install.product.install,
com.hyperion.cis.config.wizard.ProductTaskSelectionPan
el, dbg, major os version #:5; minor os version #: 2
Can anybody help me ?
Thanks

Mavericks Messages problem sending message: "not registered with iMessage"

I'm on MacBook Air(MBA) and recently installed Mavericks. I try sending a message from MBA MESSAGES to a person's cell phone number (they have an android phone). Their name appears in red and I get: "...is not registered with iMessage." So I was trying to read discussions in here and allot of them say Messages won't work unless a person has an Apple device- iphone, Mac, etc. I want to know if that is true or if there is any other way to send from the MBA a message to them? I also tried from Messages on MBA to their gmail address, which they use on their android cell phone, and get same error.
Is there anyway a non-apple person can "register with iMessage" if they have an android phone?
I know I can email them, but I wanted a fast way for emergency purposes to get a MESSAGE to them from my MBA. Sometimes they can't talk on phone at some times, but are allowed to get instant message for emergency where they work.

Hi,
You have to have otr get an AIM or AIM valid name.
AIM stands for Aol Instant Messenger.
Apple IDs issued by Apple (Those ending in @mac.com or iCloud issued @me.com and @icloud.com) are valid as AIM Screen Names if the password is kept to 16 characters or less. (this is an AIM server limit)
Apple made an Agreement with AOL over the use of names over 10 years ago.
The Original .Mac ID (@mac.com) could be paid for or could be Trial Accounts.
Trial Accounts continued to work after the trial ran out. (i.e. the email stopped but the AIM Screen Name didn't).
The same was true of lapsed accounts.
When MobileMe started people could link, email-wise, their paid for .Mac accounts to the paid for MobileMe (@me.com) accounts.
Any @mac.com still works over the AIM service.
Now also @Me.com names worked - meaning some people had two valid AIM names - they are not liked for use with AIM just that the passwords will be the same.
With the end of MobileMe all those @me.com account died as far as AIM is concerned.
However you could link it to iCloud which effectively moved it to the iCloud server.
(i.e. they are iCloud issued @me.com ID instead of MobileMe ones)
Then Apple started to issue @icloud.com IDs
This could mean that some people have three working IDs for use with AIM (but all linked to one email Account at Apple).
NOTES
From Lion onwards (iChat 6 and Above) Apple have had the app also login in to Apple before it will allow the AIM Servers to "read" the password.
This applies to any iCloud issued ID - the "newer" iCloud linked @Me.com and @iCloud.com IDs
This means you cannot use those IDs in iChat 5 or earlier as those version only do an one point login only.
With the coming of iCloud other Apple IDs could be linked to iCloud which may have given you either @me.com and later an @iCloud.com ID as well or just an @icloud one if you were later to the party as it were.
Whilst in some cases this does give you two valid AIM Screen Name the originating Apple ID does not become one.
9:04 pm Saturday; February 8, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

Hi all,
I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
Cheers and thanks in advance.

Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing

I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to iCloud pops- up constantly. My iCloud account is registered with an old email and password. I do not remember the

I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to ICloud pops- up constantly. My ICloud account is registered with an old email address and password. I do not remember the password to my ICloud account, and ID address that my ICloud account is registered under is an old email adress which is deleted right now (the old mail account is deleted). I don’t have a rescue email adress and I don’t know the answers to the security questions, so I have no way of changing the ICloud password. A message asking me to sign in to ICloud pops up constantly, but I always just hit cancel. However, now I am unable to access Find My IPad. How do I get my ICloud account changed and registered to be under my current Apple ID (email) and password? It is possible to set the device as New Ipad?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Internet connection dropping out throughout day; problem NOT with provider

My computer's connection to the Airport Express base station has no problems at all. But the internet connection goes out literally dozens of times a day (at no predictable schedule); this has been happening for almost a month. I originally thought the problem was with the internet provider, but I'm now beginning to think that either my settings are wrong, or that I have a corrupt file somewhere. Here are the details:
I connect via a cable modem (Time Warner - Road Runner). I know people have had problems with Time Warner, so I assumed that was the issue; however I've had 3 service calls and they've checked signal strength inside and out, and swapped out the modem and the cables. I don't think it is simply problems in our geographic area (i.e. greater Los Angeles) due to the fact that the Internet fails sometimes 40-50 times daily, and the problem began when I upgraded from an old Airport base station to a brand new Airport Express about a month ago.
The airport/internet connection is shared 3 ways: two MacBook Pro computers and one iPhone. My Airport's internet settings are as follows:
Configure IPv4 using DHCP.
DNS Servers: 66.75.160.63 and 66.75.160.64 (note I have already tried swapping these for OpenDNS -- this did NOT solve the problem)
Domain name: socal.rr.com
DHCP Client ID: [blank]
Ethernet WAN port: Default-Automatic
Connection Sharing: Share a Public IP address
DHCP Beginning Address: 10.0.1.2
Ending Address: 10.0.1.200
DHCP Lease: 4 hours
NAT settings are all unchecked
One of the main reasons I believe that the problem is with my computer's settings or a corrupt file is that I can fix the problem whenever the Internet "goes down" almost 100% of the time by doing the following: after loading Airport Utility, I make ANY trivial change (i.e. changing the DHCP lease from 4 hours to 5 hours) and then click UPDATE to refresh the Airport base station. This fixes the problem almost 100% of the time. But then, anywhere from 10 minutes to 3 hours later, the Internet connection goes down again. [Unplugging the power from the modem, waiting 30 seconds, and plugging it back in ALSO fixes the problem almost 100% of the time, until it goes out again a little while later.]
Also, I have tried disconnecting Airport and connecting directly to the cable modem via Ethernet. The problem remains exactly the same -- I can connect, but then the connection fails soon after. Unplugging then replugging the modem fixes the problem temporarily. So I do not think the problem is a defective Airport base station, nor do I think it is the modem (which has been replaced), nor Time Warner.
I can't think of what else to try -- but any advice would be greatly appreciated -- it's impossible for us to work with the Internet constantly going out throughout the day, every day.
Thank you!

Just in case I'm missing something obvious, I am here pasting all CONSOLE messages that appear when I do a standard RESTART:
8/22/08 7:15:12 AM loginwindow[24] DEAD_PROCESS: 0 console
8/22/08 7:15:12 AM shutdown[128] reboot by mark:
8/22/08 7:15:12 AM shutdown[128] SHUTDOWN_TIME: 1219414512 407699
8/22/08 7:15:12 AM com.apple.loginwindow[24] Shutdown NOW!
8/22/08 7:15:12 AM com.apple.loginwindow[24] System shutdown time has arrived
8/22/08 7:15:12 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[23] stopping
8/22/08 7:15:12 AM com.apple.SystemStarter[17] Stopping Adobe Version Cue CS2
8/22/08 7:15:31 AM kernel npvhash=4095
8/22/08 7:15:31 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
8/22/08 7:15:31 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
8/22/08 7:15:31 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
8/22/08 7:15:31 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
8/22/08 7:15:31 AM com.apple.launchd[1] (com.apple.distccdConfigd) Unknown key: SHAuthorizationRight
8/22/08 7:15:31 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
8/22/08 7:15:31 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
8/22/08 7:15:31 AM kextd[10] 413 cached, 0 uncached personalities to catalog
8/22/08 7:15:31 AM kernel hi mem tramps at 0xffe00000
8/22/08 7:15:31 AM kernel PAE enabled
8/22/08 7:15:31 AM kernel 64 bit mode enabled
8/22/08 7:15:31 AM kernel Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
8/22/08 7:15:31 AM kernel standard timeslicing quantum is 10000 us
8/22/08 7:15:31 AM kernel vmpagebootstrap: 972190 free pages and 76386 wired pages
8/22/08 7:15:31 AM kernel migtable_maxdispl = 79
8/22/08 7:15:31 AM kernel 98 prelinked modules
8/22/08 7:15:31 AM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
8/22/08 7:15:31 AM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
8/22/08 7:15:31 AM kernel Loading security extension com.apple.security.TMSafetyNet
8/22/08 7:15:31 AM kernel calling mpopolicyinit for TMSafetyNet
8/22/08 7:15:31 AM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
8/22/08 7:15:31 AM kernel Loading security extension com.apple.nke.applicationfirewall
8/22/08 7:15:31 AM kernel Loading security extension com.apple.security.seatbelt
8/22/08 7:15:31 AM kernel calling mpopolicyinit for mb
8/22/08 7:15:31 AM kernel Seatbelt MACF policy initialized
8/22/08 7:15:31 AM kernel Security policy loaded: Seatbelt Policy (mb)
8/22/08 7:15:31 AM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
8/22/08 7:15:31 AM kernel The Regents of the University of California. All rights reserved.
8/22/08 7:15:31 AM kernel MAC Framework successfully initialized
8/22/08 7:15:31 AM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
8/22/08 7:15:31 AM kernel devfsmakenode: not ready for devices!
8/22/08 7:15:31 AM kernel IOAPIC: Version 0x20 Vectors 64:87
8/22/08 7:15:31 AM kernel ACPI: System State [S0 S3 S4 S5] (S3)
8/22/08 7:15:31 AM kernel mbinit: done
8/22/08 7:15:31 AM kernel Security auditing service present
8/22/08 7:15:31 AM kernel BSM auditing present
8/22/08 7:15:31 AM kernel rooting via boot-uuid from /chosen: 419B2954-20DC-3880-AFEB-448924F9BE09
8/22/08 7:15:31 AM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
8/22/08 7:15:31 AM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001d4ffffe5f8d30; max speed s800.
8/22/08 7:15:31 AM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9160823AS Media/IOGUIDPartitionScheme/Customer@2
8/22/08 7:15:31 AM kernel BSD root: disk0s2, major 14, minor 2
8/22/08 7:15:31 AM kernel Jettisoning kernel linker.
8/22/08 7:15:31 AM kernel Resetting IOCatalogue.
8/22/08 7:15:31 AM kernel GFX0: family specific matching fails
8/22/08 7:15:31 AM kernel Matching service count = 1
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Previous Shutdown Cause: 5
8/22/08 7:15:31 AM kernel NVDANV50HAL loaded and registered.
8/22/08 7:15:31 AM kernel ath_attach: devid 0x24
8/22/08 7:15:31 AM kernel GFX0: family specific matching fails
8/22/08 7:15:32 AM kernel Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
8/22/08 7:15:33 AM kernel mac 12.10 phy 8.1 radio 12.0
8/22/08 7:15:33 AM kernel CSRHIDTransitionDriver::start []
8/22/08 7:15:34 AM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
8/22/08 7:15:36 AM bootlog[38] BOOT_TIME: 1219414527 0
8/22/08 7:15:36 AM rpc.statd[19] statd.notify - no notifications needed
8/22/08 7:15:37 AM com.apple.launchd[1] (com.apple.distccdConfigd[32]) Exited with exit code: 255
8/22/08 7:15:37 AM DirectoryService[34] Launched version 5.4 (v514.21)
8/22/08 7:15:37 AM fseventsd[28] bumping event counter to: 0x2e4ba71 (current 0x0) from log file '0000000002e4b394'
8/22/08 7:15:37 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[23] starting
8/22/08 7:15:38 AM kernel yukon: Ethernet address 00:1b:63:a2:29:d1
8/22/08 7:15:38 AM kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:c0:f5:49
8/22/08 7:15:38 AM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[24] Login Window Application Started
8/22/08 7:15:38 AM com.apple.SecurityServer[20] Entering service
8/22/08 7:15:38 AM /usr/sbin/ocspd[62] starting
8/22/08 7:15:39 AM kernel 11D beacon causing regdomain change to CC 840
8/22/08 7:15:39 AM kernel en1: 802.11d country code set to 'US'.
8/22/08 7:15:40 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
8/22/08 7:15:39 AM configd[36] setting hostname to "Macintosh-3.local"
8/22/08 7:15:44 AM kernel USBF: 16.757 AppleUSBHubPort: Port 1 of Hub at 0x1a000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
8/22/08 7:15:44 AM kernel USBF: 17. 59 CSRHIDTransitionDriver[0x723ca80](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
8/22/08 7:15:44 AM kernel CSRHIDTransitionDriver... done
8/22/08 7:15:46 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
8/22/08 7:15:46 AM org.ntp.ntpd[14] Error : nodename nor servname provided, or not known
8/22/08 7:15:46 AM ntpdate[70] can't find host time.apple.com
8/22/08 7:15:46 AM ntpdate[70] no servers can be used, exiting
8/22/08 7:15:53 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
8/22/08 7:15:53 AM kernel AirPort: Link Up on en1
8/22/08 7:15:54 AM kextd[10] writing kernel link data to /var/run/mach.sym
8/22/08 7:16:02 AM loginwindow[24] Login Window Started Security Agent
8/22/08 7:16:02 AM SecurityAgent[88] User info context values set
8/22/08 7:16:02 AM SecurityAgent[88] Login Window done
8/22/08 7:16:02 AM loginwindow[24] Login Window - Returned from Security Agent
8/22/08 7:16:02 AM loginwindow[24] USER_PROCESS: 24 console
8/22/08 7:16:02 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[81]) Exited: Terminated
8/22/08 7:16:02 AM com.apple.launchctl.Aqua[91] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
8/22/08 7:16:02 AM com.apple.launchctl.Aqua[91] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
8/22/08 7:16:03 AM com.apple.launchd[66] (0x101260.VersionCueCS3monitor) Failed to check-in!
8/22/08 7:16:03 AM /System/Library/CoreServices/coreservicesd[44] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Mark's Public Folder) returned -14135

My Friend used my pc while it was on, and cheked his Facebook account, now my pc remembers his log in information including his password. I'm trying to register with Facebook, but my pc remembers his info. I'm trying to delete this mistake. Can you help?

A friend used my pc to check his Facebook account, and used my account. Now, my pc thinks I am he whenever I try to register with Facebook. I didn't catch the mistake until recently and have been trying to delete the info but cannot. I tried to access all of my security settings and even tried to erase the history but I don't seem to be getting anywhere. I believe he mistakenly commanded my pc to remember his username and password. I am not currently registered with Facebook, but would like to be but I am having this problem. Is it significant or not? I don't want his info crossing with mine because of my ips numbers or something like that. He also, without my knowledge, accessed his e-mail, too. His username seems to pop up even if I try to "Like" something on Facebook. This is when I noticed the problem. Then, when I tried to Register with Facebook, I was mistaken for him. The registration boxes come already filled in with his info. I do NOT want to invade his privacy. His entire profile comes up complete with friends, pictures, etc...Please help! I cannot make a 'save' disk since I don't know exactly when this happened and I've loaded new programs, including security and related files.

I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...

Report ID94 specific software registered with Add or Remove Programs = requested software not listed

Hi All,
Our company uses SCCM 2007 and we don't really have an SCCM officer here. I kind of try to get things done by googling a lot but for this i can't find a a solution so i open a thread.
I'm a newbie to SCCM 2007 so I don't know if i'm about to ask a dumb question but here I go.
I'm trying to pull out a report for the count of computers that run a desktop version of our Ticketing Tool.
I found the perfect standard report for this in SCCM 2007 which is: Count of instances of specific software registered with Add or Remove Programs.
in there i have to set two values: 1) the software that i'm willing to count, 2) the collection in which to search.
for value number 2 I have no problems.
my problem is in value number 1. When I click the value button to list all known software, he lists all software in a alphabetic way. problem is that it stops at letter "I"... the software i'm looking for starts with an O so it's not listed.
also if I type the software and then click Values... it replies that it couldn't find the software.
am I doing something wrong?

it sound like you are using the filter option with in the old and "crappy" ASP reports. first you should stop using then and only use the SSRS reports. secondly the filter option will only show the first 1000 rows, there is a reg key to
allow it to show more.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

11gR2 Install Error, Listener is not up or database service is not registered with it

Hi all,
I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
Here's teh contents of my listener.ora file:
# listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\app\Damien
Here's the contents of my tsnames.ora:
# tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Here is the last fe lines of my emConfig.log:
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
My Listner status output is here:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date                18-JAN-2014 09:27:34
Uptime                    0 days 0 hr. 47 min. 6 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
Many thanks for any assistance that you give. I'm learning so be gentle...
Damien

SOLVED!
OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
What I did to solve the name resolution problem
1. Opened the
Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
the 'unknown' means that the DB didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
Thanks for all your help Baris, and Ed Steven website.
I know more now than when I started so I'm happy.
Thanks.

Problem registering with ULN

Similar Messages

Maybe you are looking for