Problem related to Alert

Hi,
I have a query related to Alert.
I have configured the Alert Framework,checked mapping related errors it was generating the mails etc.So Alert framework is working fine for Mapping related conditions.
Problem: I have defined a rule for receiving application error in Integration engine which contains the condition
Error Category: XI adapter & Error Code : *
I checked suppress mail alerts & Connected to message: YES
Test Case: I shut down the receiving application so SAP XI processes the message successfully but with system error and my objective was to generate an alert in this case. But System has not generated an alert as the data was not posted to receiving application.
Can anybody suggest some solution to my problem?
Suggest some solution as to how genaret an alert in this case.
Thanks & Regards
Prabhat

Hi,
I hope at the end of this you may get some Info on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

Similar Messages

Problem related to PS CS6 ext. on Mac. Nikon DSLR D610 raw file can not be opened

Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

What OS are you running: 10.x.x?
What version of the Camera Raw plug-in do you have? Do (About) Plug-ins / Camera Raw to find out.
You need at least ACR 8.3 to open D610 files. If the Help / Updates process does not work, then there is a manual install process you can do. The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

HT4623 Is this the most up to date article on up dating the iPhone - it there anything about the problems relating to the up date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!

Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!

iOS 7 devices need iTunes 11.1 or newer to sync. Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1. What computer and OS are you running your iTunes on? From the iTunes download pages I see the requiorements are:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store

The problem related to wireless service Wi-Fi connectivity Never work properly

Hi
i am bashair from KSA
I have iPhone 5, you update your iPhone to version 6.1.3
The problem related to wireless service Wi-Fi connectivity
Never work properly, you try Method posed but did not succeed..
i need help me please
thanks..

UPDATE
Hey this is totally weird. I haven't done jailbreak at all and I won't But how is possible that default apps such as Safari and Appstore have the problem I've mentioned before and Skyfire works perfectly without any trouble.
So to sum up:
Safari: loading stucks after few seconds on wi-fi, mostly doesn't load pictures
Appstore: loading stucks after few seconds on wifi and it keeps saying "loading"
Facebook and Youtube: doesn't load pictures
SKYFIRE: loads everything without any trouble
and completely everything works on Edge...
So tell me W.T.F. :-D

Simple problem with an alert

I want to show an alert, then when it times out, display a menu of choices (the "main menu").
Problem is, the alert never displays; the menu immediately pops up so they never get a chance to see the alert message.
How do I get the alert to wait it's timeout period before continuing on to the next block of code?
Here's a fragment:
Alert altOk = new Alert("Save","New settings saved.",null,AlertType.INFO);
altOk.setTimeout(3500);
display.setCurrent(altOk);
showMainMenu();
Thanks in advance for any help!

Yap...that's because you encapsulate the display.setCurrent(menu) in the showMain() function.
In fact, I encapsulate both setCurrent(new Alert(the correct parameters)) in the showAlert function. In doesn't make sense in the way you should show the alert after main but that's the way it is. IF someone out there know the reason, I would like to know as well...But my guess is because the Alert is subclass of Screen which is more lighter that Displayable object....so you have to put the Displayable initially. Tha analogy is the same as when you use the Swing libraries. IF you want to add menubar, you have to put the menubar on the frame then show the frame at the end(hence, Frame is heavier than menubar)....
Hope you'd tested the code.....
cheers....

Problem related to variable substitution

Dear all ,
I have a query related to variable substitution :
The requirement is that filename should be in the following format : %<store_code>%_%<Date>%_master.xml .
I have done the configuration for Store_code in the variable substitution from Payload .
But I am facing problem related to Date as the requirement is that we should not take the date from the payload . We used "ADDtimestamp" in the file mode creation but it is generating file with time stamp also which doesn;t serve the purpose .
Can somebody suggest how to take the current date without taking it from payload . Does anyone know something about standard current date which I can assign directly to Var2 .
Thanks in advance
Regards
Prabhat

Hi,
In your mapping, have a user defined function which has a bit of Java to get the current date and time and pass back out to a variable.
Here is a code snippet I got in Google to do this :
import java.text.*;
import java.util.*;
public class Dtest {
public static void main(String args[]) {
 SimpleDateFormat df = (SimpleDateFormat)
 DateFormat.getDateInstance(DateFormat.SHORT);
 System.out.println("The short date format is " + df.toPattern());
 Locale loc = Locale.ITALY;
 df = (SimpleDateFormat)
 DateFormat.getDateInstance(DateFormat.SHORT, loc);
 System.out.println("The short date format is " + df.toPattern());
Cheers
Colin.

I am having a problem relating camera roll album bugs

i am having a problem relating camera roll album bugs

Can you trell us more about it?
If the camera roll is covered partly by your screen, close the photo app, open the multitask bar, tap on the photo app icon unitl it starts to shake, then hit the little minus icon to close the app completely.
Return to your home screen and start the photo app again, you should be able to select the camera roll again.
You can also reset the phone to get it working again.

Hello I have a problem related to synchronization. When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt. How to make the section "Other" did not increase? Thank you.

Hello
I have a problem related to synchronization.
When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt.
How to make the section "Other" did not increase?
Thank you.

DOCUMENTS AND DATA IS ALSO WHERE YOUR MAIL INFORMATION IS STORED SO IF YOU ARE A "HOARDER" IN EMAIL, GO INTO THE GMAIL, HOTMAIL, ICLOUD ETC WHATEVER YOU USE, AND DELETE YOUR TRASH, SENT, DRAFTS, ETC.
THAT SHOULD HELP A LOT.

Problem Related To HOT Spot in ABAP Programming?

Hi All,
I developed a program of purchase register now i want that on clicking the PO it will take the user to the conserned PO for that i used HOt Spot but still it is not taking me to the conserned PO. Plz tell me what do i do to fullfill my purpose.

hi, Abhinav
i think that the following Code will help you in this way.
REPORT zfsl_hot_cust_docn.
TABLES: zsd_credit_bal, tvm4t, t023t, kna1.
TYPES : BEGIN OF t_sd_credit_bal,                 " To define Internal Table for holding following Data
          benid LIKE zsd_credit_bal-benid,        " Customer ID
          botcp LIKE zsd_credit_bal-botcp,        " Pack
          audat LIKE zsd_credit_bal-audat,        " Date
          vehno LIKE zsd_credit_bal-vehno,        " Vehicle Number
          vbeln LIKE zsd_credit_bal-vbeln,        " Document Number
          movmt LIKE zsd_credit_bal-movmt,        " Movement type
          quantity LIKE zsd_credit_bal-quantity, " Quantity
        END OF t_sd_credit_bal.
SELECT-OPTIONS: soaudat FOR zsd_credit_bal-audat NO-EXTENSION OBLIGATORY DEFAULT '20071121'.
DATA : sd_credit_bal1 TYPE STANDARD TABLE OF t_sd_credit_bal WITH HEADER LINE,
        sd_credit_bal2 TYPE STANDARD TABLE OF t_sd_credit_bal WITH HEADER LINE.
START-OF-SELECTION.
DATA: vbenid(10), vbotcp(3), lineno TYPE i   ."LIKE LINE OF sd_credit_bal1.
PERFORM main.
*&      Form MAIN
*       text
FORM main.
SELECT benid botcp audat vehno vbeln movmt quantity INTO CORRESPONDING FIELDS OF TABLE sd_credit_bal1
    FROM zsd_credit_bal
    WHERE audat IN soaudat.
WRITE: 'Main Menu'.
WRITE: / 'Select Entry to see its details.'.
LOOP AT sd_credit_bal1.
    WRITE: /1 sd_credit_bal1-benid HOTSPOT ON, sd_credit_bal1-botcp HOTSPOT ON.
    vbenid = sd_credit_bal1-benid. vbotcp = sd_credit_bal1-botcp.
    HIDE: vbenid, vbotcp.
ENDLOOP.
ENDFORM.                    "main
AT LINE-SELECTION.
WINDOW STARTING AT 25 3 ENDING AT 103 25.
WRITE: 1(78) sy-uline,
         /1 '|',
         3(10) 'Date' CENTERED,
         14(1)'|',
         16(35) 'Vehicle Number' CENTERED,
         52(1)'|',
         54(10) 'Pack' CENTERED,
         65(1) '|',
         67(10) 'Movm Type',
         78(1) '|',
         /1 '|',
         1(78) sy-uline.
LOOP AT sd_credit_bal1 WHERE benid = vbenid AND botcp = vbotcp.
    WRITE: /1'|',
           3(10) sd_credit_bal1-audat,
           14(1) '|',
           16(35) sd_credit_bal1-benid,
           52(1) '|',
           54(10) sd_credit_bal1-botcp,
           65(1) '|',
           67(10) sd_credit_bal1-movmt,
           78(1) '|',
           /1'|',
           1(78) sy-uline.
ENDLOOP.
Replay if any Problem related to this Code.
Kind Regards,
Faisal

How can i solve the problem relate with gmail links opening in firefox ? New link start in new tab and disconnects.Also youtube streaming breaks everytime .

Firefox disconnects by clicking link in my gmail and most of time i refreshes the page few clicks. And also some problem relate with playing youtube videos. I frankly notice that i connect my net using PC Suite and also system protected with Anti virus program. So kindly check my browser and restore it's missing without using factory reset. Notify me for any urgent update of yours 16th version. Thanking for yours brilliant support .
Jaison James.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC

Hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out

hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out

olliemilne wrote:
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers. This would allow you to install the original OSX . I have my doubts though.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA. Doing that will serve no useful purpose.
You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
Ciao.

I have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem

i have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem

See Here for Device continually restarts...
http://support.apple.com/kb/HT1808

Safari just shuts down suddenly due to some problems related to plug-ins.

Hi
I have an mac osx 10.5.8
I use safari version 4.02.
Sometimes (very often actually) it just shuts down suddenly due to some problems related to plug-ins and gives error and I relaunch . Do you have any idea why it is happening?
can some help me?
best
didem

i really do not know what causes it and how i can remove it actually!
In the help menu there is something about plug-ins but i have really no clue what it it supposed to mean
so can you elaborate what to do ?
thanks
didem

HP 25 Calculator - Hard problem related to memory

Hi All,
I have an old HP 25 calculator, and I tried to revive it after 20 years have stopped.
There is a problem related to memory malfunction that is, the store functions and programe functions don´t work.
Can any one of you help me?
I would like to know if there is available some electrical scheme to understand and analyse what probrably is happening and also if there is some workshop here in São Paulo - Brazil, that could fix these old calculator.
I live in Brazil, in São Paulo city.
Thanks in advance.

Hi,
I think you will find the HP Calculator Museum forums a good place to ask:
http://www.hpmuseum.org/forum/
(ask your question in the General Forum).
I am sure there someone will give you some guidance.
Best regards.
Note: I do not work for HP, I just like playing with calculators :-)

Problem related to Alert

Similar Messages

Maybe you are looking for