Problem related to break-point in SAP biller direct

Hi All,
I am new to SAP biller direct.We are using ECC 5.0 system as the back end system.We created an implementation for the BADI 'APAR_EBPP_GET_DATA'.I wanted to debug this BADI.So i set a breakpoint at a particular line.When I opened biller direct web application , no dubugging session opens at any point.Any idea why this is happening.
<removed_by_moderator>
Edited by: Julius Bussche on Jun 23, 2008 9:55 PM

If this is a production system, then debugging might have been disabled; so the backend is saying "no way". Contact your basis folks and ask them.
Other than that, I am afraid you are not even left with the last resort option of debugging it anymore...
How about writting really, really good code which does not require debugging?
Cheers,
Julius

Similar Messages

Payment of bills advised by SAP Biller Direct

Hello everyone,
I got the following problem:
We cannot pay (in fact balance) the bill advised by a "customer" on the SAP Biller Direct portal.
We use the transaction F110 for automatic payment transactions. The proposal run gives the following result:
Bank details are being checked
    Customer/vendor bank details are being read
Country US / Bank number 123456780 / Account 12345678 ...
Country US / Bank number 123456780 / Account 87654321 ...
     Customer/vendor bank details are being checked
Bank details 123456780 87654321 have bank type E001; bank type E000 is specified
   System reads house banks and checks if they are allowed
Our bank BANK is being checked
For currency USD and 005 days            0,00 are planned
Available amount too small,            0,00 USD still available,        5.880,00 necessary
   House bank is selected ...
No permitted payment method exists
We already checked and configured all possible configuration. We also did the customizing in FBZP.
When I want to add the payment method (in our case '0' for Biller Direct bank payments) to the customer in XD02, the system says:
"in company code "xxx" '0' is an FSCM-BD payment method and cannot be used.
Detail: In company code "xxx" '0' is indicated as payment method for the FSCM Biller Direct component. This payment method identifies items that were paid via Biller Direct on the Internet. Therefore, the payment method cannot be used in any other way.
Any idea how to resolve this?
Regards,
Vermeer

The solution for this problem:
in FBZP: Add for your house bank in 'Available Amounts' a value in Scheduled incoming payments. After this the payment run finished successfully.

SAP Biller Direct utility industry based business package AND CRM

Hello Experts
Can we use SAP Biller Direct utility industry based business package and CRM together??
points will be rewarded for responses
regards
srinivas

Yes ! We could use Biller Direct on our landscape !
Thanks
<b>Allot points if this helps!</b>

SAP Biller Direct utility industry based business package

Hello Experts
Can we use SAP Biller Direct utility industry based business package with Finance module???
points will be given to right answers
regards
srinivas

Yes
Biller Direct is aimed to be linked to the FSCM suite.
There are two views of Biller Direct, B2C and B2B.
B2C is used where customers deal with consumers, an example would be the utility industry. The Consumers can pay online their bills and view their account, update master records and so on.
The B2B is where there is a fuller customer master, normally you have less customers, but the customers have more line items. There again is the possibility to make payments here, however this is unlikely. They can however review their account, and raise disputes, print off copy invoices.
All of this functionality is delivered via JAVA and it is pretty standard, however the area that takes the longest time is setting up the users.

Questions on SAP Biller Direct Java Customization

Hi,
I am working on SAP Biller Direct java customizations. Can anyone help me find answers to these questions.
-- I have created local DC from the Biller direct track in NWDI. I would like to change the User registration page in Biller Direct.
Can any one let me know the JSP page name for that and where can i find it in the components.
--- Also all this development do i have to do it in J2EE perspective and checkin my changes?
Also i would like to know if anyone can send some documents on devlopment part of Biller direct.
Thanks
Edited by: Aparna on Aug 20, 2009 12:33 PM

Hi Aparna,
I have a couple quick questions about BD development and would really appreciate it if you could provide some advice since we are starting our build soon.
In my NWDI track, I have component FSCMBD and several other of the required SAP components. I did not create a new product or component, just followed the procedure in this thread: https://forums.sdn.sap.com/thread.jspa?threadID=1331894. Is that the method you recommend?
I am concerned about doing development directly on the FSCMBD component. How do I prevent my developers from modifying BD source code? Is the idea that they will create independent DCs in NWDS (as you described) and only modify those? I just want to make sure that we are doing development in a way that is supported and will not cause issues when applying SPs or upgrades to FSCMBD.
I also want to confirm that this "create project" activity is not something that I need to do as an Administrator in the NWDI track; this is something my java developers will need to do in NWDS at the beginning of the build.
Thanks Aparna!
- Michelle

SAP Biller Direct Badi's

Hi ,
Can any one help me on how to implement SAP Biller Direct badi's. i.e. APAR_EBPP_GET_DATA & EBPP_INVOICEDETAIL.
Pls ur help is urgently need.
I will appreciated if you can also provide the source code for various functions.
regards
Gajendra

Hello ,
Goto SE19 provide Implementatin name as per u r coding standards
and say Create
It will ask the BADI name then proide u r BADI names ....
then go the appropriate method to implement it based on the Interface parameters of the metod.
Still if u r not clear
Please search in SDN you will get numbers of Solutions for HOW TO IMPLEMENT BADIS
Regards

SAP Biller Direct Badi.

Hi ,
Can any one help me on how to implement SAP Biller Direct badi's. i.e. APAR_EBPP_GET_DATA & EBPP_INVOICEDETAIL.
Pls ur help is urgently need.
I will appreciated if you can also provide the source code for various functions.
regards
Gajendra

I think this [Link to SAP Help on using the badi APAR_EBPP_GET_DATA|http://help.sap.com/erp2005_ehp_05/helpdata/en/43/5c31bef1183e2be10000000a1553f6/content.htm] might help you.

Problem setting External break point..

Hi All,
I am using EP6 SP14 and R/3 4.6C. Java Webdynpro aRFCs to connect to R/3 BAPIs. I am having problems setting up external break points. I don't see Debug option in "Utilities -> Settings -> ABAP Editor". Do we have this option in R/3 4.6C? If yes how to enable the option? If no, what is the work around to debug the BAPI through Portal.
Helpful answers will be rewarded.
Regards,
Uday.

Hi,
Pl go through this
Debugging ABAP Code from within Web Dynpro Application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30
It explains step by step process
Regards
Ayyapparaj

External break point in sap r/3 system

i want to set external debugging to rfc in r/3
i tried to set it
its getting set
but when i call rfc from external system(webdynpro)
its not gng to that break point i.e its not linking to that break point
what could be the reason
and how we can set external breakpoint
are there any setting we need to do in r/3 so that break points will work
Regards,
Vani

Hi Vani,
First u have set ur Server to Debug mode...then only u can debug the code...
1. Select "Server0" from J2EE engine (To get this view navigate thru Window--> Show View --> J2EE Engine)
2. Make a right click on "Server0" and choose "Enabling Debugging of Process"
3. Now, Navigate to Run --> Debug --> Select your Project as "Webdynpro Application" and click "new" button
4. Now give some name and Click BROWSE to select ur project and then click APPLY and DEBUG
Or
if u use 2004s, then u can do the settings in Portal itself...which gives u more clear information... follow the link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56">WebDynpro Java Debug Configurator</a>
Hope it helps...
Regards / Guru

Break point in SAP Script

Hi Guys,
I just wanted to clarify something.
In report if i do write break point then while running the program the system will halt there allowing me to debug.
Is this functionality possible in SAP script too??
I mean is breakpoint a valid statement in SAP Script?

Hi,
1) If you want to debugg the perform then
there are 2 ways to bebug a sap script.
one by using standard program
goto se38 and ececute RSTXBUG and give ur script name debug the perform.
other one is
put a soft breat point in u r perform code(in program)
like
BREAK SAP-USER.
then when u execute u will directly goto debug mode.
2) normally you can debugg the script by
In se71, Chose from menu:
Utilities-> Activate Debugger
From the transaction, In the output message screen, you chose chose your output type, Go to Further options, Chose the dispatch option as Send at periodically scheduled jobs . then save the transaction. And run the prigram RSNAST00 It would stop at the debugging.
Regards
Kiran Sure

Problem chosing layer break point for multi-movie DL DVD

HI. If you're authoring a DL DVD containing several short movies which can be selected from a menu in any order, how are you supposed to know which order they're burnt to disc in so as to know where the layer break point needs to be? Is media burnt in the order it's added to the project or what? Does it actually matter about choosing a LBP manually so long as DVDSP provides a choice of automatically determined points?

You can use VTS view to see the order they are laid out in
http://dvdstepbystep.com/vts.php
As to manually selecting a layer break, you can if you want to, especially if you know a section is a fade to black (for instance) where it will be less noticeable.
Some background -
There has to be a break point where it crosses over from Layer 0 to Layer 1, if you have no Chapter Markers at all (or a limited number of Markers, none of which fall near the point which is a bit more than half the size of the assets you will get an error that a Layer is the wrong size.
What you do is
1.) Set up markers in the areas where your would guesstimate the Layer Break(s) should be
2.) Build the project (but not format)
3.) Format a Disc (in the dialog that comes up, click on advanced tab, then where it says break point, use the pulldown which will have all valid breakpoint markers dark/black, while non-valid Layer Break Markers will be faded) If no marker is black there is no marker in the right place, regardless of you use automatic or not.
4.) If the layer break(s) are not where you would like them (in other words a place where they may be more noticable) use VTS view to re-order then go back to step 1.
When you do enough DLs, you start getting a sense based on the size of tracks where things should land

SAP Biller Direct

Hi,
Can you anyone provide me detail configuration document of biller Direct ....
Regads,
Karim

Hi Shaik,
Please go through the link given below.
http://scn.sap.com/docs/DOC-14175
Hope this helps you.
Regards
Eugene.

SAP Biller Direct PDF Retrieval Error

Hi All,
We are getting error while opening PDF on Biller Direct portal. The error comes in pop-up as follows->
Adobe Reader could not open "XXX.pdf" because it is either not a supported file type or because the file has been damaged or wasn't correctly decoded.
The original PDF document is stored in FileNet server and we are using a ABAP Function module GEN_EBPP_GET_INVOIVE_DETAIL to retrieve the PDF content from FileNet server and display it in Biller Direct application.
Note: The same PDF is getting opened from ABAP.
Pls let me know if there is any settings to be done in either ABAP side or in Visual Admin. I've checked VA entries in HTTP Provider and it is set MIME type as {.pdf,application/pdf}.
Is there any other information that i'm missing here. Pls give me a hint.Thanks in advance.
Thanks, Venkat

Hi
I also get something similar which I need to solve.
When going to biller direct via a url like http://<host>:<port>/bd/public/frameset_top_html.jsp?ebppMode=S I see my pdf icon next to the open bill in the open bills list and clicking the icon displays my pdf correctly.
When going via a portal and clicking the same icon for the same invoice I get the same first popup asking if I want to open the pdf file (as in the case above with the same identifier name for the pdf file) but this time when I click Open then Adobe Reader opens a window with the message "There was an error opening this document. This file cannot be found."
Thus the portal connection cannot find the existing pdf file.
DL

Forte for JAVA: Problems with break points

Dear all,
I have the following problem:
When setting breaks point within the code of my web application (servlets and JSP) the debugger does not seem to be able to find them and to stop where I would it to :o(
When approching a portion of code that I know have a break point, I get the following message in the debugger window->
Connecting to localhost.localdomain:11555
Connection established
Breakpoint reached at line ? in class org.corproware.strutsrelated.listener.DBPoolListener by thread main.
Note the interrogation mark (?) instead of a valid line number.
It looks like I have the same poroblem with a simple java "HelloWorld"
Is their something I don't get or is it a known problem?
Many thanks!

Sorry mate, wrong forum. You shoud try Sun ONE Studio Forum isntead of this one. It is for UDS (Formerly known as Forte)

Problems with break point in Dual Layer project

Hi,
I'm currently having a problem setting a break point in a Dual Layer DVD project in DVD Studio Pro 4. I have a project that has 5.9 GB of data (5 shows with between 7-8 chapters in each). The problem I'm having is that in the 5th chapter of the 4th show, there is a freeze frame hickup when I burn the disk. I've tried moving around the chapter mark, deleting them and re-adding them, re-exporting the media (it is in MPEG-2) in all combinations of those and am still having the freeze problem at that chapter mark. I've gone back to the original media and there are no problems there.
What I think the problem is is that the disk is automatically setting the break point for the dual layer disk at that chapter mark. However, when I go into the project and try to set the break point manually from the dropdown, I can't seem to select anything. The default is the begining of the 5th track, and I can only change it to automatic and back again. Anything else I select just goes back to that 5th track, but I still think it's actually doing automatic instead. I'm using a Verbatim DVD+R DL if that helps anything as well.
To all, do you agree that the problem is most likely due to the break point? And if so, how do I change the break point to the beginning of either the 3rd or 4th of the shows instead of having it seem to be stuck on automatic?
Thanks in advance,
Chris

Alright, to answer my own question. Here's what I think the problem was.
There are actually two Disk/Volume menus: one in the Disk settings when you're actually working in the project and another when you go to build and format. I kept trying to set the break point in the first one--in the disk settings in the project--and it wouldn't let me because it can only be set when building and formatting.
It's kind of an annoying settup that there are two identical menus that don't fully communicate with each other, but in the end the solution has been solved.
Chris

Problem related to break-point in SAP biller direct

Similar Messages

Maybe you are looking for