Problem Related to Geneartion of New Counter For IK34?

Hi All,
I want to Create A new Counter So that we can put entry agaist it through IK34. So Plz tell Me from Where I can Create IT?

hi
first create characteristic with the required unit of measurment using CT04
Then create measuring point using the characteristic using IK01
Then create list entry using IK31
then you can enter measurement document for the list entry in IK34
regards
thyagarajan

Similar Messages

Cannot open new tabs. I have a laptop Vista. Had no problems before. is it the new update for foxfire 3.6.13? please advise. Hildee

I'm attempting to open a new window w/tab options. Can't even open a new tab using my mouse.

Thanks very much. Disabling the Ask Toolbar add-on solved the problem for me.
Peter

Problem related to error handling in Proxy for Inbound

Hi All,
I have a requirement to process the inbound interface , which internally updates the HR Infotypes.
I need to handle all possible erorrs and store it in the custom table.
Can anyone please guide, as to how to catch the errors and wht type of errors can be there.
How to do that?
Any help will be gr8.
Regards,
Heena

Hi Heena,
the thread has been moved to ERP - Payroll as the application experts my be able to provide the list of error codes.
Regards
Kenny Scott
XI/PI Forum Moderator

I can't download library book through Overdrive Media to my IPod Touch. It won't transfer from Itunes since new update for the icloud

I've not had a problem before, but since the new update for Itunes, I can't download library books through Overdrive Media to my Ipod touch. It transfers to Itunes but shows a message on my IPod that it can't sync.

I don't recall updating recently, but tonight I found I had the same problem. However, if I plugged my ipod in, it then gave me the option to transfer to just ipod, or library and ipod. However, that raises other problems, because you know we have to change these over from music to audiobooks. Also, ITunes is freezing on me, even after doing a fix reinstall. It looks like it's connecting to the store and I have to end task it. Also, some freaking crap is going on with my ipod. I "lost" my audiobook option I had locked to the bottom of my page. Also, all the other music I had on my ipod is gone, wasn't much as I use this mostly to listen to audiobooks. But the only music album there is the free U2 one Apple gave out a while back. So I'm in it even worse than you right now as I have a 2 day trip planned and was adding more books to my selection, to listen while driving. But try what I told you above. If it does put it on your ipod, you can delete it and "fix" the info in iTunes, then transfer it back.

HT4623 Is this the most up to date article on up dating the iPhone - it there anything about the problems relating to the up date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!

Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!

iOS 7 devices need iTunes 11.1 or newer to sync. Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1. What computer and OS are you running your iTunes on? From the iTunes download pages I see the requiorements are:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store

Problems with the new Pages for Mac

I'm starting to see countless problems running the new Pages for Mac (5.0.1) and I can't find a way to resolve them.
1. when I'm typing and want to delete word(s), I'll use the alt+delete function for ease, however this starts deleting words after the cursor, merging words together and changing my sentece. It comes from when I'm deleting as the new pages is giving me the dropdown menu for the autocorrect word.
2. grammar check is off. Namely, it picks a random point in a word and moves on from there. EX: "because of the" will have "use of the" underlined in green and give me recommendations to change to "because of the" or "cause of the". Using those recommendations, I'll end up with something like: "becabecause of the"
3. the find and replace function jumps around in the paper, and sometimes doesn't even display the word currently selected (leaving the user to scroll around looking for what is selected)
4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
I'm still using it, and these are what I have found, so there may be more later as I continue to use it. If anyone has found ways around these bugs, please let me know.
Thanks!

Semnani wrote:
4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
Pages 5 now uses the system autocorrect, which does not have as many features as the one inside Pages 4. Some things you can add manually there. Others you have to ask Apple to add via
http://www.apple.com/feedback
Or continue to use Pages 4 instead.

I am experiencing problems with my i phone due to sharing my daughters i tunes acoount. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? Please help. RM

I am experiencing on going problems with my i phone 4 due to me sharing an i tunes account with my daughter. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? I cant find any links in i tunes to do this. mountfield

No, it's done on the computer, it's just done on the web and not through iTunes. I guess you could do it on the iPhone, but it would be easier to do on the computer.
Just go to the site linked above, then click on the big blue button and fill out the neccessary information.

HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

http://support.apple.com/kb/he37

I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks

I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks

Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

I created a new ID for my Iphone, because the old ID was an email address I no longer have. Also, the phone wouldn't recognize the password I have always used. Now the problem is when I try to update my apps, it automatically wants to use the old ID.

I created a new ID for my Iphone, because the old ID was an email address I no longer have. Also, the phone wouldn't recognize the password I have always used. Now the problem is when I try to update my apps, it automatically wants to use the old ID. I've set the new ID for the phone, but it defaults to the old one when asking for a password to update apps.

That's because all apps are forever tied to the Apple ID used to obtain them, & can only be updated using that ID.
To use your new ID with these apps, you'll have to delete them, then repurchase. Or, contact iTunes support, explain the situation, & ask that they add these apps to the download queue of your new ID.

Problems when creating a new parameter for a parametric role

I'm trying to create a new parameter for a parametric role, but it seems that it is never updated, because the BPM engine does not return any error.
The scenario is: I have a process that has the role "Brands_Admin", the brands are populated by Web Service dynamically, then the parameters of the role would be those brands. In this case, if a new brand is registered (WS returns a new brand), I simply create a new parameter for the role through the "process administrator" of the BPM Enterprise.
I'm trying to create the new parameter as follows:
dirSession                 = DirectorySession.currentEngineSession;
dirOrganizationalRole       = DirOrganizationalRole.fetch(session : dirSession, id : "Brands_Admin");
String[] parametricRoles       = dirOrganizationalRole.parametricValues;
parametricRolesCount      = parametricRoles.length();
parametricRoles[parametricRolesCount]      = "NEW_BRAND";
dirOrganizationalRole.parametricValues      = parametricRoles;
dirOrganizationalRole.update();
dirOrganizationalRole.refresh();
for (int i=0; i<dirOrganizationalRole.parametricValues.length(); i++) {
     logMessage(dirOrganizationalRole.parametricValues);
In the code above, the BPM Studio will print the new parameter correctly, but in next activity (like a Screenflow) when I try to get the parameters of that role again, there are only the parameters that were registered using the BPM Studio, the parameters that are created programmatically not appear.
Anyone know the reason?
An user with the same problem: http://forums.tangosol.com/forums/thread.jspa?threadID=839253&tstart=1

When a project that contains this logic to create a new parameter for a parametric role programmatically is deployed in BPM Enterprise, some strange behaviours occurs.
The first is that I cannot see through the process administrator the new parameter that was created for the parametric role.
The second is that if I create this new parameter through process administrator and associate an user to the role that contains the new parameter I cannot access the deployment process. In workspace (authenticated with user that is associated with the role that contains the new parameter) I cannot see anything about the process.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Problem Related to Geneartion of New Counter For IK34?

Similar Messages

Maybe you are looking for