Problem:related to material master replication from r3 to srm

hai everybody,
hai to all of u my friends....recently i have learned sap srm 5.0..and now i am practicing in my institute from starting configuration with a fresh client.everything has done successfully except replication of material master.while doing material master replications the system throws an error like" product hierarchy has not maintained" and one more error while executing smq2.. like "exception condition :guid forlogsys_changed"raised....thanks in advance

It seems that the logical system name has been renamed or changed. You need to update the config tables. Fix it using Trx BDLS.
Regards, IA

Similar Messages

Problem related to Material Master?

Hi All,
I want that when ever any person creates a new material and on going on Views it shows the particular views which were fixed by us. Please Tell me how can I achive this.

Hi,
You can achieve this by way of authorization control. In T.code: PFCG, select your role for creating / changing the material master, Select option Maintenance statuses. Then at change status option select views that you want to give the authorization to the users. Create profile & save the role. Now assign the role to the users. They will get only those views you have selected for them. You have to select those views in all the roles related to material master (create, change, display).
Regards,
Biju K

No Material Master replication from R/3 to CRM

Hallo guys,
i've got no replication of material master, haven't tried any other object except customizing but customizing is triggered from CRM and was replicated fine. Can anybody help me how can i debug the replication process from R/3?
Thanks for your help in advance.

Dmitry,
You first need to determine where your errors are happening?
1. Do you have blocked queues on CRM? If you see a blocked inbound/outbound queue on CRM via SMQ1 or SMQ2, then you can try to rerun the BDOC message in the queue.
2. Is there tax code customizing not downloaded correctly into CRM? This sometimes can hang up your download of materials?
3. Have you looked at SMW01 after the load to see if you have any BDOC's in error, the queues were empty?
4. What is the status of the initial load R3AM1?
I would hold off from debugging until I figure out where in the download process that I am receiving the error. Once I know that fact them I can debug a single download. You will have to set a filter on the material object to a single material and attempt an initial download. When you perform the initial download you will need all queues deregistered on the CRM side, so that you manually execute the BDOC import into CRM.
The last step will require placing a breakpoint into the validation function module for material.
I believe validation function module is: COM_PRODUCT_MAT_VALIDATE. If you have questions along the way of debugging the flow, please reply back and I will try to see if I can answer them. It has been a little while since I had to debug our middleware downloads.
Good Luck,
Stephen

Material Master Replication From SAP R/3 to SRM

Hi Gurus
For the testing, I maintain a Job for the program SMOF_DOWNLOAD on daily basis in SRM system and I created the 5 material Masters in R/3. I am facing two issues.
1. The Material Master are replicated immediately, its not working as per the job Scheduled ( I Scheduled the job on every day night at 24:00:00).
2. I am able to see the R/3 Material Masters in SRM system in tcode COMMPR01, but I am unable to use the Product IDs in SC creation, I am receiving the error message as "Product 1000056822 does not exist in plant 1560 or it has been flagged for deletion (Item Test SAP R/3 to EBOP )".
My material master is relevant to plant 1500, I change the plant 1500 in SC basic data, but the error is not disappearing.
Please suggest me.
Thanks in advance
Thanks & Regards
Sada

HI,
Check if the plant is defined in the PPOMA_BBP org structure.
If you have not defined the org elements in the extended attributes tab then the system will not know in which plant the material is been created.
Thanks & Regards,
Kiran

Material Master Replication from R/3 to CRM 7.0

Hi ,
I am trying to replicate the Material maintained in R/3 to SAP CRM 7.0. Here is, what i have done up till now...
I have downloaded
Object DNL_CUST_BASIS
Object DNL_CUST_PROD0
Object DNL_CUST_PROD1
using tcode : r3as & all have been downloaded successfully.
But when i try to download Object Material from R/3 to CRM using the same tcode, its giving me an error saying
004 : Hierarchy for material types does not exist
005 : MATERIAL: Object will not be loaded
Right now i am able to see the categories & hierarchies in tcode COMM_HIERARCHY.
I would appreciate if some one can suggest suitable solution for this issue.
Thanks,
Edited by: SAPRPT on Aug 12, 2009 9:23 PM

Hello ,
There might be two reasons:
1)There must be some inconsistency in CRM with respect to hierarchies.You can use reports COM_HIERARCHY_DELETE_ALL in CRM and then again download DNL_CUST_PROD1 and then object MATERIAL.
2)There must be some materials in R/3 which have been maintained for some obsolete hierarchy.
That means hierarchy is not present in CRM and/or also it might not be present in table T179 of R/3.But in table MARA,this hierarchy has some records.Please check and correct the records.
Best Regards,
Shanthala Kudva

Material Master Replication R/3 to SRM

Hello SRM Experts,
I am in a process of replicating MM from R/3 to SRM server.
This is not a new one,already some materials are loaded into SRM.
Ths issue what I am trying to understand is I have many materials,material Types and material groups added in R/3, but not all flowu2026
I just want to know if I add a new Material Type,Material Group and Materials on R/3 side how do I get them replicated?
What are the tasks that need to be performed on R/3 and SRM for their replication?
I have gone throgh the Blogs of material replication by Vipul,but this is not pointed.
In R3AM1 it is showing the below status...
Running   DNL_CUST_BASIS3
Running   DNL_CUST_PROD0
Running   DNL_CUST_PROD1
Running   DNL_CUST_SRVMAS
Done      MATERIAL
Do I need to start the initial Load R3AS again?
Pls guide meu2026
Thanks
Arshad

Hello Jose,
Thanks for response...
I have made sure that i cleared all the queues in both systems
in SMW01 i found the below
Category for material group 4000 does not exist
Message no. COM_PRODUCT_API002
Diagnosis
If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
Procedure
Check whether the material groups have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
I tried restarting the DNL_CUST_PROD1 but this gives me below msg
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD1*)
Message no. SMOF160
now what to do..?
Arshad

Material Group Replication from ECC

Dear SRMers,
System Landscape : ECC 6.0 and SRM 5.0.
I am doing a material group replication from ECC to SRM using the DNL_CUST_PROD1 customizing object. Before the replication ECC was trying to confirm the target RFC destination(SRM) by prompting a logon. I logged in as myself and the system gave a CALL_FUNCTION_OPEN_ERROR.
I defined the CRM Consumer as SRM in the CRM middleware parameters..
My question is do we need to define the User SRM in SU01 and when ECC tries to confirm the target RFC destination, do we need to login as the SRM User ?
Points will be rewarded for answers.
Thanks in advance,
Bob

Hi,
The RFC user which you define in the SRM RFC detsination has to be obviously as SU01 user in SRM.Also the RFC user need to have SAP_ALL and SAP_NEW profile attached.See note 642202 for details.
Also Check:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/d3eb4190966024e10000000a1550b0/frameset.htm
BR,
Disha.
Pls reward points for useful answers.

Material Master replication ... ECC to CRM

I have a requirement to replicate a material master record from ECC to CRM, based upon an 'external event' (i.e. an event other than the change of the material master record itself, in ECC). The event is the change in status of a record in a z-table.
What is the best way to accomplish this? Is there a function module or BAPI that I can call, to trigger the replication of a material to CRM, whenever this event occurs? Are there other suggested / better approaches to satisfying this requirement?
Your help will be much appreciated!
Thanks,
Duane

If your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
If can check the below link for details
[http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
Thanks
Subhankar
Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM

Return PO Price is picked up from MAP of materia master,not from info.recod

User Requirement :
When creating return po ,the price is picked up from MAP of material master ,not from info.record
I wrote a code at PO Enhancement "MM06E005" user exit "EXIT_SAPMM06E_017",but don't change the price ,pls help me check what the problem is ,thanks.
The below is my code.
DATA : M_VERPR LIKE MBEW-VERPR,
       M_PEINH LIKE MBEW-PEINH,
       M_MEINS LIKE MARA-MEINS.
CLEAR :M_VERPR,M_PEINH,M_MEINS.
CHECK SY-TCODE = 'ME21N ' OR   SY-TCODE = 'ME22N' OR   SY-TCODE = 'ME23N' .
IF I_EKKO-BSART = 'ZNB7'.
    LOOP AT TEKPO.
SELECT SINGLE VERPR PEINH FROM MBEW INTO (M_VERPR,M_PEINH)
                                         WHERE MATNR = I_EKPO-MATNR AND BWKEY = I_EKPO-WERKS.
    SELECT SINGLE MEINS FROM MARA INTO M_MEINS WHERE MATNR = I_EKPO-MATNR.
    TEKPO-INFNR = ' '.
    TEKPO-NETPR = M_VERPR.
    TEKPO-PEINH = M_PEINH.
    TEKPO-MEINS = M_MEINS.
    TEKPO-BPRME = M_MEINS.
    TEKPO-NETPR = TEKPO-NETPR * I_EKKO-WKURS.
    MODIFY TEKPO TRANSPORTING NETPR PEINH MEINS BPRME NETPR.
    CLEAR TEKPO.
ENDLOOP.

Hi Gunawan,
According your meaning ,I change the logic as following:
IF I_EKKO-BSART = 'ZNB7'.
SELECT SINGLE VERPR PEINH FROM MBEW INTO (M_VERPR,M_PEINH)
                                       WHERE MATNR = I_EKPO-MATNR AND BWKEY = I_EKPO-WERKS.
SELECT SINGLE MEINS FROM MARA INTO M_MEINS WHERE MATNR = I_EKPO-MATNR.
TKOMV-KNUMH = ''.
TKOMV-KAWRT = M_VERPR * I_EKKO-WKURS.
TKOMV-KPEIN = M_PEINH.
TKOMV-KMEIN = M_MEINS.
EndIF.
But the values of the fields are not updated,I need to write the code in EXIT_SAPMM06E_017 of PO Enhancement,may you help me ,thanks.

Vendor master repliaction & Material Master Replication

Hi GRM Gurus,
Whether Vendor master replication & Material Master Replication is applicalbe only to
Plan driven procurement (PDP ) Scenario only (Extended Classic) (or) it is needed for Classic Scenario ?
Please give your views
Regards
G.Ganesh Kumar

Hi
First of all for any scenario except Stand alone. you need to replicate material and vendor master from backend system. because in SRM we dont have any master data. We purely depends on backend system.
Regards,
Satish gopal

Guidance for getting material master data from database table

Hi,
I need guidance to fetch following Material master data from the system data base.Please guide me for the same.
BASIC DATA1
BASIC DATA2
MRP1,2,3,4
WORK SCHEDULING
QUALITY MANAGEMENT
ACCOUNTING1
ACCOUNTING2
COSTING1,2
PURCHASING
PURCHASE ORDER TEXTSALES ORG1,2
SALES GENERAL/PLANT
PLANT DATA/STOR.1,2
WAREHOUSE MGMNT1,2
Also please tell me in general what is the reason for error while uploading the data into system using BAPi(AM talking about return message error).
Thank you.
Edited by: sanu debu on Feb 24, 2009 12:41 PM
Edited by: sanu debu on Feb 24, 2009 12:42 PM

Use BAPI's
BAPI_MATERIAL_GET_DETAIL
BAPI_MATERIAL_GETALL
BAPI_MATERIAL_GET_ALL

Vendor Master replication from EBP and MM to SUS

Hi !
We would be replicating Vendors from R/3 as well as from EBP to SUS. I believe that there is certain configuration to check duplication of Vendors and also to assign a single business partner ID even if a Vendor is replicated both from EBP as well as from MM. Can anyone thro some light on this & the procedure...
Thanks

Hi,
For the Vedor Maste replication from EBP and MM to SUS,
U need to maintain the proper RFC conncection between R/3, EBP SUS and XI as a middleware.
U can transfer the Vendor by using the T.Code - BBPGETVD.
U can transfer vendor to SUS using
transaction BD14 with message type Z_CREMAS_SUSMM as
SAP suggested.
Your error due to incorrect mapping in Integration
Directory of XI.Kindly check the Interface
determination for message type Z_CREMAS_SUSMM.
Please award the points for the help.
BR,
Vijay Mittal

Vendor Master Replication from MM to SUS

Does any one have experience on Vendor Master Replication from R/3-MM to SUS (scenario without EBP).
Is this replication made via XI?
Which are the configuration steps for this scenario?
Thanks
antonio

Hi antonio,
I hope now you r now transfering vendor to SUS using
transaction BD14 with message type Z_CREMAS_SUSMM as
SAP suggested.
Your error due to incorrect mapping in Integration
Directory of XI.Kindly check the Interface
determination for message type Z_CREMAS_SUSMM.
If possible send more details for error .Is this at
SUS End ?
Regards
Sachin S M

I have encountered a peculiar problem in MM01 material master upload.

I have encountered a peculiar problem in MM01 material master upload. The
BDC program uploads data using Session method. The problem is when i
process the session in foreground mode the data uploads successfully, but
when i process it in background mode it gives the following errors in the
log.
'Control Framework: Fatal error - GUI cannot be reached'.
'Runtime error RAISE_EXCEPTION has occurred'.
When i debugged the program i found that this error is encountered when
data is being input in 'Purchase Order text' editor of MM01 transaction.
There is no problem with the BDC recording or the program as i could see.
The only problem what i believe is the system is unable to call the text
editor for inputting purchase order text data in background mode.

Hi
Try uploading a BAPI it would be better
http://www.saptechies.com/mm01-upload-using-bapi/
Regards
Shiva

Extend material master data from one plant to another plant

hi,
how can i extend material master data from one plant to another plant.
is there any sap standard transaction for this ie. bdc/t-code.
thanks in advance.......
rahul

Hi
If you want to extend the material form one plant to another then below are the possible options.
1) MM01 - Use the material in the reference and fill in copy from and to then press enter to complete the extention.This is recommended only if you want to extend very less records.
2) Use LSMW and record MM01 thru BDC recording available in LSMW and make the template in excel and convert it to .txt tab delimited format to upload more records.LSMW is the perfect tool and is used extensively in all the projects.
3) Get the help from ABAPer to create upload program and include the BDC recording.
There is no standard T code available in SAP becoz data mainatenance in the material master will be based on the industry.
Hope it will help.
Thanks/Karthik

Problem:related to material master replication from r3 to srm

Similar Messages

Maybe you are looking for