Problem related to transfer of stock to blocked stock?

Hi All,
i want to transfer the stock from unrestricted i.e my stock is already lying in unrestricted  and now I want to move it to Blocked Stock . please Tell Me How Can I do it?

Hai,
You can move the stock from unrestricted to Blocked stock via T.code MB1B Mvt Type 344. Stock movement from Blcoked from unstricted Mvt Type 343.
reg/ Shankar G.

Similar Messages

  • GR-blocked stock VS Blocked stock

    Dear all,
    I still have some confuse with the concept and use of GR-blocked stock and blocked stock.
    As far as I know, GR-blocked stock is usually triggered at the point of goods receipt with ref to PO. If the goods are not satisfy with the requirement, then post the goods to GR-blocked stock via 103.
    However, under what circumstances we need to post the goods to blocked stock?
    Thanks in advance for the guidance.
    Thanks.
    Best Regards,
    Edwin

    Hi,
    Good receipts is done in Unrestricted stock (or) Qualtiy Stock (or) BLOCKED stock
    Movement type - 101 Unrestricted stock (or) Quality Stock
    what circumstances we need to post the goods to blocked stock?
    during inwarding if you found that the lot will having problem where the value is more and qty is more
    you will inward in Blocked stock
    Movement type -- 103 - For blocked stock in this you are moving to block stock if  you see the P.O history of the p.o. there will be qty updation and value updation is not there
    when u move from block stock to unrestricted stock using movement type 105
    stock will be getting updated and valu also
    You have totally confused
    G.Ganesh Kumar

  • Diffrence between GR Blocked stock and Blocked stock

    Dear Seniors,
        Kindly tell me the difference between GR Blocked stock and Blocked stock ? in which case, we will move stock to GR blocked stock and blocked stock ??? kindly explain me please.
    Regards,
    JanaMM

    Hi
    Material can flow directly from goods receipt into consumption/usage or into the warehouse. However, It may also be placed into a blocked stock area first.
    Using the stock type, you can post the material into quality inspection stock or into blocked stock. In both cases, the material is already managed in the stock. Alternatively, the material can be conditionally accepted. Conditionally accepted deliveries for a purchase order are recorded in goods receipt blocked stock (GR blocked stock).
    The quantity posted into goods receipt blocked stock is not added to the inventory or managed as part of the inventory. It is only recorded in the purchase order history.
    You would use goods receipt blocked stock, for example, if the vendor's certificate for the delivered quantity were missing, or if you wanted to inspect a small quantity of the material before posting the actual goods receipt.
    When the conditions for acceptance are met, the material can be accepted into stock (for example, into unrestricted-use stock). The goods receipt is not valuated until this point.
    If the goods are to be returned to the vendor, instead, they can be taken directly from goods receipt blocked stock. Note, however, that a return delivery is possible even if the material was already posted into stock
    Blocked Stock is Valuated Stock. it is blocked for Certain reason.
    Blocked stock (not usually available from an MRP perspective and no withdrawals are possible for consumption)
    From blocked stock, you can withdraw only one sample, scrap a quantity, or post an inventory difference.
    If you want to withdraw goods from blocked stock for consumption, you first have to carry out a transfer posting to unrestricted-use stock.
    Thanks
    Dipak
    Edited by: Dipak J k on Sep 29, 2009 2:24 PM

  • Sales order stock to block stock - movement type?

    hi
    what is the movement type from sales order stock to block stock?
    thanks

    first a mvt 414 to move the stock from sales order stock to storage location, then a 344 to move it from unrestricted to blocked.

  • GR blocked Stock and Blocked Stock

    Dear Experts,
    In standard way in T.code MMBE which stock in Gr blocked and Blocked stock how can I see this stock document no. ( 103 and quality 321 etc. ) in which document no they come in same stock.
    Pooja

    Hi,
    For your require ment go to the T.Code MB51 and give the Mov type  , you get the documents relataed to as per Mov no.
    In MMBe itself the option is there for GR blocked stock and blocked stock.
    Regards,
    Andra

  • 'blocked stock" & "GR blocked stock"

    what is the difference between "blocked stock" & "GR blocked stock"? Explain in detail.

    hi,
    GR BLOCKED STOCK:
    1.     The material document is generated.
    2.     As the GR blocked stock is non-valuated stock, the no accounting document is generated.
    3.     The PO history gets updated and the open PO quantity is not reduced as a result.
    Can display GR blocked stock at:
    1.     Stock overview(At plant level)
    2.     PO history
    BLOCKED STOCK: Its not available for MRP and Consumption..cancheck it in MMBE...
    Hope it helps..
    Regards
    Priyanka.P
    I REQ,. YOU TO GO ON CLOSING THREADS IF IT GETS ANSWERED...
    Edited by: Priyanka Paltanwale on Dec 15, 2008 1:07 PM

  • QM_move stock to block stock through Q2 notification type

    Dear QM Experts,
    u2022 I am creating quality notification type Q2 through QM01
    u2022 After doing necessary defect entry I want to post the defective material to block stock.
    u2022 For this I am using action box transfer posting unrestricted to block.
    u2022 By doing this material can be transferred to block stock of the same storage location
    Requirements,
    u2022 Is it possible to move the material to block stock of another storage location?
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    u2022 What type of setting needs to be done to achieve this effect?
    Thanks
    Anand Rao

    Hello
    u2022 Is it possible to move the material to block stock of another storage location?
       In notification action box you have the option of transferring the material from unrestricted to  block. In that you have the option inputting the storage location to which you want to transfer
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    - As said this can be done through a development or other option is that you can choose the same action box( Transfer  unrestricted to block ) and change the movement type to 311. It will allow to move material from  one storage location to another
    another solution is that you can use tak with followupaction as Goods movements. its available in the standard. when u save the notification it will take you to transfer posting but wherein you will have to key in all the details
    u2022 What type of setting needs to be done to achieve this effect?
    Its available in the action setting in the configuration of notification. you will surely require ABAP help

  • Warning when moving allocated stock to blocked stock

    Dear all.
    we are facing a problem with our quality / mm flow. We have materials that while in stock need regular quality inspections (every 72 hours) .
    Batch is inspected and passed inspection and allocated to a sales order / delivery but will only be shipped in a few days. Then the batch is inspected again and does not pass inspection. The inspection people move the material from unresticted to blocked status.
    However the delivery is goods issued and send to the customer because the quality inspection people don't get a warning that the batch is already allocated to a sales order when they do the goods movement into blocked stock.
    Anybody has a sollution?
    Regards,
    CvM

    Hi Lakshmipathi
    thanks for the info. However if I understand correctly this means that every batch needs quality inspection before PGI and that is not the case.
    Every 72 hours the batch will be quality inspected. In most cases the delivery and the PGI will take place within the first 72 hours. However in some exeptional cases the inspection will take place between Del note creation and PGI (not on purpose, just the 72 hour boundry, the quality inspection people are not aware of the delivery)
    At that time the batch is already allocated to a delivery yet during the quality inspection the batch fails the qualifications and will moved to blocked stock.
    The people who move the batch into blocked stock need the warning that this batch has been allocated to a delivery so that it can be stopped before the trucks leave our property.
    Regards,
    CvM

  • Nullify the stock from Blocked Stock.

    Hi,
    I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
    Please guide how to nullify the stock for parallel unit of measurement of the material.

    Hi,
    Please check the below things.
    1. Check the material master whetner a conversion is maintained for EA and KG.
    2. You can try post the MI10 document for the blocked stock in the parallel unit.
    3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
    4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
    5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
    6.Check MB5b FOR the wrong posting.
    If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
    Check for note on the service.sap.com
    Regards,

  • Return consignment stock to blocked stock

    Hi All,
         I want to be able to return consignment stock through sd (pick up)directly to blocked stock .
    Movement type 632 is now used to transfer consignment stock to own unrestricted.
    What can i do ? is it possible  to put material in block stock with movement type 632
    In MM02, I enter the material code for which I am  creating consignment pick up and selected "Quality Management" view. & assign inspection type  06- Inspection for Returns from Customer
    & marked post to insp  stock.

    Hi
    Option 1
    For your consignment pick up schedule line category F0 or F1 the standard movement type is 632
    only
    You are not adviced to tamper the standard settings
    With  632 movement type stocks will be in  own unrestricted
    You can move them to QI inspection in t code MB1B with movement type 322 which should be he correct process
    Option 2
    But if the business demands then in your schedule line category F0 or F1 change the movement type to either 
    655---goes to QI inspection straight away (you can move them back to unrestricted  t code MB1B with movement type 321)
    or
    657----blocked stocks (you can move them back to unrestricted  t code MB1B with movement type 343)
    But avoid option 2
    Regards
    Raja

  • Stock without Blocked Stock

    Hi Experts,
    Is there any report in which we can get the total stock as on date which will not include the blocked stock qty.
    Regards,
    Manish Jain

    something like "MB5B  ignoring blocked stock"  is not available.
    if you need to know the quantity at a day in the past without consideration of blocked stock, then you have to develope a report like MB5B yourself.
    or you do it the easy way: just execute MB52 as background job and save the spool files.
    or create a small ABAP to write the  stock  dayly from MARD(and some other tables)  to a  Z- table

  • Problem related to transfer posting?

    Hi All,
    I want to transfer a material from one storage location to another with in same or different plant. So I need a BAPI for Warehousae Management for the same. Please help me in this .

    Please check this related link:
    bapi for transfer posting
    Re: bapi for Transfer Posting
    bapi- for mb1b(transfer posting

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • How to get block stock of QI and UR

    Dear All,
                 I have a requirement to create a customized report for Finished products stocks.
    Selection screen:
       - Plant
       - S/Loc
       - material
       - month
       - year
    Output has opening and closing balance, of stocks . I am fetching blocked stock from MARDH, (SPEME + RETME )
    my problem now is is want to excluded block stock to QI (with movement type 349 and 350). Please suggest me as how to exclude material from movement type (349 & 350) from the total of MARDH (SPEME + RETME )
    Edited by: soyunee on Apr 24, 2009 2:50 PM

    Hi Soyunee,
    To make all types of calculations on stock I have a some methods posted previously,,
    Please check the link once for calculating the stocks accordingly.
    [How to calculate Opening Stock for a particular date|How to calculate Opening Stock for a particular date.;
    To Calculate Opening Stock & Closing stock there are different procedures.
    It just depends of\n the client requirements & usage of the material.
    For example, we have different types of stocks, like, Through Pipeline, Special, Unristricted, quality, safety,
    and many types of stocks.... so all these types are indicated in MSEG tabe in SOBTZ field,...
    Now Comimg to your Query, You need to calculate OPENING & CLOSING STOCK.
    We have a similiar standard report in MB5B Tcode..
    to get the same results in your report do like this...
    For valuated stock go to the MARDH, MBEWH, MCHBH tables But I Prefer MBEWH.
    here in MBEWH give the month & year and you get the result in LBKUM field...
    For Special stock, You need to go to another table like MKOLH,,(I forgot still 2 more) and
    give the month & year inputs and you will get the result in SLABS field.
    and remaining MB5B refers to its deetails lists with different Movement types,
    whcih you can get clearly from MSEG Table...
    Hope you can write the select Queries accordingly.
    If you want to find the Stock for a particluar date, It is not available in any table as I know,
    Rather you need to do calculations like this.
    1. Select the stock (Menge) till date from MSEG and add all with different movement types,
    Its a logic need to ask to your functional consultant,
    like 101 added to stock, 601 sales, 102 rejeted, 602 added back to stock,... transfers, 261,,, like this.
    But take a little time, get all these by using MKPF & MSEG tables... thats it.
    Or----
    2.Tables are MSEG , MKPF ... use Debit / Credit indicator ( Do not go woth any static Movement types ) and u have to consider all stock related table
    MBEW , EBEW etc..., to get the stcok on particular date .
    Please refer to Std. Tcode FBL5N for reference.
    Thanks & regards,
    Dileep .C

  • After MIGO mvt 101, moving stock to blocked.

    Hi,
    after posting a good receipt with MIGO (mvt type 101) I want to move this stock into blocked stocked
    using the material document of the goods receipt.
    How can I do this?
    I tried with MIGO selecting transfer postings, material document and indicating the material document
    of the goods receipt but system can't allow this:
    Diagnosis                                                                               
    You want to post a goods receipt, goods issue, or transfer posting with
        a material document as a reference. The document entered does not      
        correspond with the prerequisites in order to be used as a reference   
        using this functionality.                                                                               
    System response                                                                               
    The prerequisite of this functionality is that there is a material     
        document without a reference, in other words, the document posted at the
        time must have been an 'Other' goods receipt/goods issue or an 'Other' 
        transfer posting, according to the selection.                                                                               
    If, for example, you want to post a goods receipt, you cannot use a    
        transfer posting document as a reference.                                                                               
    Procedure                                                                               
    Choose a document suitable for the selected activity.

    Hi,
    If you want to post to Blocked stock, do it while you are taking the GR - 101 -blocked stock. When it clears the inspection then you can transfer that to unresricted stock.
    But here remember, you can not transfer with ref. to material document. Input the material and Quantity.......
    You can also explore the functionality of 103 nad 105. Posting to Gr-Blocked Stock and releaseing from GR-Blocked stock. Here you can transfer with ref. to material document. Most of the companies use this functionality, in case material needs intial or visual inspection.
    Hope this resolves your issue.
    Thanks,
    Kris

Maybe you are looking for