Problem related to Zen Nano Plus detect

I tried to upgrade my firmware version. Then my PC hanged so it shut down itself, then after that, my nano plus can't be detected and can't be turn on. Help me, or at least, do anyone of the people here has some phone number for the creative support in the philippines?
Thanks

View all knowledge base solutions for your player? http://support.creative.com/Products...=ZEN+Nano+Plus

Similar Messages

Fm radio problem and speakers zen nano plus..

. Why does my zen nano plus automatically turns of when i use the fm radio even if it has full battery?
2. Why does my zen nano plus automatically turns of when i connect pc speakers even if it has full battery?
I NEED HELP!!!!!!!!!!!!!

Try reloading the firmware for your Nano Plus - that sorts out most problems with these players. Go to Support, Downloads and choose MP3 Players, Zen, Nano Plus. Make sure you follow the instructions carefully.
PB

Problems running creative zen nano plus and nomad muvo on same compu

We have 2 nomad muvo mp3 players and now a zen nano plus .Have had constant problems with the media organiser .
Installed zen nano plus and selected enable smart fit to get maximum amount of songs and it worked fine but as soon as we tried to install software for the 2 nomad players it would not work smart fit for any of them.
Uninstalled everything and got the zen software in and it was running ok but then seemed to have problems and although smart fit was enabled it just copied files as the original mp3.
It then fatally crashed yesterday and I am awaiting a replacement as I had only had it for 2 days.
Is it possible to run all 3 and to be able to use smart fit on all 3 players or am I better off having just one working and using the file converter for the other 2.


Make sure that you have installed the MediaSource plugin for MuVo in order to get SmartFit You have to access SmartFit via the MuVo node of the Sources window in MediaSource. You won't see SmartFit if you access your MuVo via the My Computer node of the Sources window in MediaSource..
Here is what you should do to get the latest MediaSource software:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
- (Depending on your firmware)
Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
or:
Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
- Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
- Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

Problem with Creative Zen Nano Plus 1 GB mp3 player please r

I bought zen nano plus? month ago and while i was transfering music into it it crashed ,? it looked like its no more readable so i disconected it from my pc , it needed format , i did format and tried to transfer some music again but the same problem appeared . I thought the memory card of the player is damaged and needs to be changed or repaired? , i gave it to customer support and after a few days they said they installed newer software version to the player , well i thought it will fix the problem . Once i got home i tried to transfer music and it crashed again , i couldnt even format it cause when i plug in the mp3 F: ( usb dri've ) does not respond. I gave the mp3 to customer support again , they filled up the mp3 with music six times and everything worked fine. But at home it still crashes while transfering , so i dont know what to think . On the packet where the mp3 was when i bought is written WORKS WITH WINDOWS VISTA ,?currently i have windows xp ,? can it be that i can only transfer music without prloblems with windows vista ? can it be that zen nano plus is created to use with windows vista ? Thanks for reading !

Did you install the driver on your PC? If not, then do it. Try reformatting the player as FAT. Next try tranferring a few folders full of mp3 files. Use windows explorer to drag and drop the folders? with files to the player. Now see if the player will play them.

Zen Nano Plus - can't move music to it all of a sud

My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

Will Zencast Organiser support the Zen Nano Plus in the futu

I would like to know whether a future release of Zencast Organiser will support the Zen Nano Plus and similar players in Zencast Transfer. Or is this only possible for MTP players?Also items from a particular channel need to be played back on players?(normal play mode) by date (oldest first) and not alphanumerically by file name, or at least for this option to be introduced. I like to hear my podcasts in date order. Surely this makes sense and wouldn't be too difficult to introduce into Zencast transfer?

I have the same problem with my Zen Nano Plus gb player, only it shows up under "Other Devices"

Creative Zen Nano Plus Firmware Problem, AGAIN! (PeeBee HEL

Hi all,
I am new here and have read all the posts and FAQ's but couldn't solve my problem. Actually there is a post http://forums.creative.com/creativel...d=68923#M07024 which tells exactly my problem. Have tried the solution but didn't solve it.
So I am here asking again.
I bought a zen nano plus GB and downloaded the latest firmware(ZenNanoPlus_PCFW_LF__0_03.exe) and the latest mass storage driver (MStorage_PCDRV_LB__07_00_250.exe). When I put the player in recovery mode as the firmware is detecting devices the player takes it self out of recovery mode and back in mass storage mode how do i stop it from down that?
I am trying to update it because my player doesn't play wma files :angry:I have tried PeeBee's solution but it didn't work. I have taken the battery out, reconnected it and it is recognized in recovery mode. I run the firmware and the computer plays a sound, the icon of connection appears in the nano's lcd and it is out of recovery mode. Then firmware program tells me that the 'device state is not set' and after that the message 'put into recovery mode before updating firmware' Aaaaaarrrrrghhhh!
I'm also running windows XP SP2
Can anyone help me?
Thank you in advance
Marcelo Lopes
Rio de Janeiro - Brazil

Hello-
I had a similar situation develop. Did your error message say, "Media state not initialized?" Here is what the creative support site says:
If you receive a message "Media State is not initialized ..." while updating firmware for a MuVo or Zen Nano Plus player, it will be necessary to install the Player Recovery Device driver and then update the firmware.
. Download the latest driver if you have not done so. You can download it from http://us.creative.com/support/downloads, and file name is MStorage_PCDRV_LB__07_00_250.exe.
2. Install the latest driver by double clicking on the file name.
3. Unplug the player from a computer if it is plugged.
4. Remove the battery from the player (except Zen Zeeon which has a built-in battery).
5. Press and hold the Play button while connecting the player to the USB port.
6. Continue to hold the Play button for about 0 seconds after connecting your player is connected to the USB port.
7. Keep on holding the Play button till Windows displays the Find New Hardware dialog box.
8. If this is the first time a player is installed as Player Recovery Device, Windows will find a Player Recovery Device (or USB Device), and prompt you for drivers. Click on No, and select "Do not search. I will choose the driver to install". Windows will install the drivers automatically.
9. Double click on the latest firmware upgrade file that you have downloaded previously, and follow the instructions on the screen.
0. Format the player if you are prompted to do so.
It is recommended that you stop your player properly before physically disconnect it from your PC.
To stop your player in Windows XP, Windows 2000 or Windows ME
Click on the Safely Remove Hardware icon on the Taskbar, click Safely remove USB mass Storage device, and disconnect your play when you are prompted to do so.
To stop your player in Windows 98SE
Make sure that the icon below appears on the LCD screen again for at least fi've seconds before disconnecting your player.
Now, I did all of the above and still got the error. What solved the problem finally was to connect (using the above method - remove the battery - hold the switch, etc) to a DIFFERENT USB port. Then all worked well, and the firmware transferred. Don't ask me how or why.
Good luck.

Zen Nano Plus connection problems - SOLVED (1/2/06)

I recently bought the Nano Plus. On first installation everything worked fine. I decided to upgrade to the latest drivers and firmware via downloads from the Creative site. At some point during the firmware upgrade, everything seemed to hang. Eventually I had to halt the process, disconnect the player and reboot.
When I plugged the player back in, it is detected as a USB Mass Storage Device, but Windows Explorer and the Zen Nano Plus Media Explorer both claim that the device is not connected.
Here's what I have done so far:
)Uninstalled all drivers and Creative software, rebooted, reinstalled drivers/software, rebooted. When plugging the player in, a brief window pops up saying Zen Nano Plus has been detected. This is followed by USB Mass Storage Device being detected (this window stays up a lot longer, sometimes more than 5-0 minutes before disappearing).
2)Another uninstall/reinstall, but this time with a registry cleanup in between. Same result.
3)Tried installing installation cd on partner's laptop and plugging in the player. Absolutely everything works fine. So it's not my player. There must be something I still need to do on my desktop to get everything to work again.
4)Have also tried plugging into every USB outlet on the desktop. No change.
My system:
Windows XP (sp 2)
3.2 GHz
Intel 865 chipset
2 GB RAM
My Zen Nano Plus is currently running .0.03 firmware (latest).
On this desktop I am running the latest drivers (Creative Mass Storage Drivers .07.00.250)
When the player is plugged in, device manager shows no problems. Under Disk Dri'ves, Creative Zen Nano Plus USB Device is listed (and says the driver is from Microsoft, 7//0, version 5..2535.0). Under USB, USB Mass Storage Device is listed (and says the driver is from Microsoft, 7//0, version 5..2600.0).
I have tried manually updating these drivers to anything listed in the Creative folders upon installation, but it does not detect anything. When I check the drivers listed on the laptop that works with the player, these same driver details show up.
Any advice would be appreciated. I certainly would hate to only use my partner's laptop every time I want to update my music. I am also frustrated and puzzled as to why my player first worked on my desktop and now doesn't.Message Edited by lcvdw on 0-03-2006 2: AMMessage Edited by lcvdw on 0-03-2006 2:2 AM

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Zen Nano Plus - Connection Problems and Firmware Upgrade probl

Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
I eventually got it by doing this:
While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
-taka

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Problem with zen-nano-plus!! please help

i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
Good luck!

Problem with Zen Nano Plus--Please He

I just bought a GB Zen Nano Plus about a week ago. It worked fine until I had to change the battery. Now every time I play the mp3 music it automatically shuts down. I messed around with it and I figured out that every time the backlght shuts off, so does the player. It only does this while playing mp3 music (I can isten to the radio for as long as I want). This is pretty wierd because when I use the battery that came with the player, which is almsot totally dead, it doesn't do that.
If anyone has had this problem or knows how to fix it, please respond.

Are you logged on as an Administrator?
PB

Having same Zen Nano Plus problem as Golden Oldi

I didn't want to hijack Paloma's post, but was amazed when I read it because the same thing is happening to me!
My new Zen Nano Plus just arri'ved in the mail 2 days ago, I downloaded the software, connected the player to register it and got the USB connection symbol. When disconnected it does NOT switch on when I press or hold the scroll button.
I do believe I followed all instructions carefully, but something is really wrong. I'm not computer/electronics illiterate, but a wiz I ain't! I'd really appreciate any help! Thanks!

keaton wrote:
how do i do that? (connect it in recovery mode)
See my reply in this post.
PB

Zen Nano Plus - Used Battery vs. New Battery Prob

I downloaded some WMA files from Walmart.com and successfully transferred them to my Zen Nano Plus. They played fine. But the battery, which was already low on power, died. I switched in a new battery and tried playing WMA files, but they would only play for about three seconds before the mp3 player shut off.
I switched back in the old battery and the WMA files played just fine.
Both the old and new battery play the MP3 files, so there's no problem there.
Is the problem related to voltage or something? Please help.

Known issue, check [url="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=40235&view=by_date _ascending&page=">this thread[/url].
No solution yet, I'm afraid.

Zen Nano PLUS - Firmware Broke My Ze

Please help me .
I have read through countless threads here looking for the answer on what to do when...
...your Zen Nano Plus is passed warranty, you install the latest firmware, and your player is no longer readable by your USB ports.
Before I tried upgrading the firmware it would detect it as what it was -- a Zen Nano Plus. Now, however, I plug it in and I don't even get a notification that Windows detects it even so much as a generic device.
Everyone says: Revert back to an older version of firmware.
Question: HOW DO I ACCOMPLISH THIS WHEN ) I CAN'T TURN MY PLAYER ON AND 2) IT IS NOT BEING READ WHEN I PLUG IT IN?
Sorry about the caps, but I feel Creative is about to let me down after all these years. Did I waste money on this thing or is there an actual solution that works?
My friend's dad had this exact same problem. He took it back and exchanged it for another Zen Nano Plus and it did the same thing agan.
Thanks in advance.
PS - Thanks to Creative for being acti've in these forums and trying to help their customers who have given Creative their hard earned money that they earned working at a job.

IT WORKED!!
PeeBee you are the man for your post in this thread:
http://forums.creative.com/creativel...d=279272#M6263
All this is Creative's doing, though, for their lackluster support for their own product. In one thread they specifically say Zen Nano Plus has no recovery mode. Why does it take non-Creative staff such as yourself to call them out and help with these issues? My friend's dad had to take time out of his day to dri've back to Best Buy to exchange it (TWICE). If only Creative would administer care in their own product support then threads centered around Creative's MP3 players being beat down by their own firmware wouldn't have over a thousand thread views each by people looking for retribution for a piece of junk they think they wasted their money on.
Thank you, PeeBee. I, on the other hand, am investing in Apple next time due to lost faith, faith that has been religiously stood by since the beginning days of Dr. Sbaitso. If this thread gets deleted rather than replied to by a mod, admin, or Creative staff member then it means I'm right.

I am having a problem with my Zen Nano P

When I first got the player for my birthday it was great. I transferred a lot of music onto it and would take it to work out or just to listen to it. But like all people I got bored with the list so I deleted all the music and made another one. Well after three lists I can no longer sync it with my computer. I have tried everything. The USB ports are working, I can sync other devices up with my computer, but for some reason I can no longer transfer songs. Its not like other problems I have read about like man I can't transfer all the songs I want no I can't transfer any songs, and the player has been emptied.
So lets recap, no songs on the player, have tried Mediasource and Windows Media Player, and still can not transfer any songs at all. And I think my warranty has run out so I can't get my money back or get a new player.
Please help if someone can.

You are welcome. I am happy that the redownloading of the firmware helped you and fixed your problem. It is the first thing I try whenever my players don't do what they are supposed to do. I use my Zen Nano Plus mainly for audiobooks. It is a great little player.
luvmyrescuedogs

Problem related to Zen Nano Plus detect

Similar Messages

Maybe you are looking for