Problem releted sales order

Hi All,
when I am creating Sales order through VA01 and entering Sold to party its giving a error" this customer is not maintained for perticuler sales area" even i m using diffrent sales area which is extended for customer but when creating Sales order its giving diffrent sales area even i m not using that.
please tell me why it giving diffrent sales area.

Hi ,
please check are u maintained the common Distribution Channel and common Division if not go to the following steps
u2022     SPRO / Sales and Distribution / Master Data / Define common Distribution channel (T-Code VOR2)
u2022     SPRO / Sales and Distribution / Master Data / Define common Division channel
        (T-Code VOR1)
Regards,
Prasanna

Similar Messages

I have a problem regarding sales order line item with confimed quanity

Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,

Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards.

Condition Period Problem in Sales order - Need help

Hi Gurus
I am testing Sales Order back dated
Condition period Problem in Sales order
example for you to understand
Sales Order where PO date is 17.12.2007
Del Date & Price date is 13.02.2008
Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
Rajesh Chalke

Hi,
I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
Cheers,
KC

BAPI - Problem in Sales order creation

Hi Friends,
I have problem in Sales order creation using BAPI ,I am getting a messsage - Error in creating document ,I have sent the code along with this mail ,can you help it out.
Code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text   = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
       EXPORTING
            sales_header_in     = header
            sales_header_inx    = headerx
       IMPORTING
            salesdocument_ex    = v_vbeln
       TABLES
            return              = return
            sales_items_in      = item
            sales_items_inx     = itemx
            sales_schedules_in = lt_schedules_in
            sales_schedules_inx = lt_schedules_inx
            sales_partners      = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
    COMMIT WORK AND WAIT.
    WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
Regards,
Dinesh

what messages u are gettting in RETURN ? Please check the RETURN tables data.
[code]CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Regards
Prabhu

Problem in Sales Order with specific condition type.

Hello Experts,
I'm facing a problem in sales order creation for a specific condition type.
the actual scenario is as below,
We have created a new condition type for special discount.This condtion type is applicable only for specific sales channels.Also the discount percentage has to fetched from a custom table.
To achieve this I've written a user exit "RV64A999"
In the FM, i've calculated the subtotal and fetched the discount percentage and calculated the discount amount. After implementing this, the SO were been created properly. for all the line items the discount amount was getting calculated properly.
But then I added a condition at the top of code in exit that the calculation for the new condition type should happen only for selected sales channels.
But after adding this condition in code, i'm facing problem. Now when I create/ change any SO, the discount amounts are getting calculated incorrectly. I'm getting discount amount even if the line item subtotal amount is zero (0).
Any help or pointers reagrding this issue will be very helpful and highly appreciated.

Hi ..
Check your config. again or debug the routine code with your ABAPer and find the problem area.
-Maharshi

Rounding off value problem in sales order

Hi All,
This is related to a rounding off value problem in sales order.
The problem is described by an example which is as follows -
Selling Price of Material A = Rs. 176.76
Excise charged = Rs. 21.80
Total Price = Rs.176.76 + Rs.21.80 = Rs. 198.56
On this total Trade Discount (ZDTD) having access sequence,is calculated at the rate of 4% = Rs. 7.94
But the condition base value after the discount is showing Rs.198.60 instead of Rs.198.56
I want the system to reflect the value as Rs.198.56 intact and it should not round up to the nearest value i.e. Rs. 198.60
Why is this happening? Is it possible to reflect the exact value? If yes what is needed to be done?
The commercial round off is activated for the DIFF Condition Type.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka Mitra

Hi Ramesh,
Thanks for your suggestion but the problem has been solved by me.
Regards
Priyanka Mitra

Problem about sales order stock stock transfer and batch determination

Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.

I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.

Problem with sales order and Service order

Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.

CLOSED

The problem for sales order ra settlement

dear friends
i encounter a problem in sales order settlement
1 we use rev based result analyse ,and with profit realization
2 when the so status is rel ,the valuation base is Q,when the status is TECO and finl ,the valuation base is J
3 when we partially do the billing and run the ra settlement ,the poc = cumulate act rev/plan rev * actual cost in current period(i think this should be the cumulate actual cost ),and it lead to the error calcuation of the COGS,i do not know where the confirguation is error ,is in valuation base ?
can you help me
thank you

dear friends
i encounter a problem in sales order settlement
1 we use rev based result analyse ,and with profit realization
2 when the so status is rel ,the valuation base is Q,when the status is TECO and finl ,the valuation base is J
3 when we partially do the billing and run the ra settlement ,the poc = cumulate act rev/plan rev * actual cost in current period(i think this should be the cumulate actual cost ),and it lead to the error calcuation of the COGS,i do not know where the confirguation is error ,is in valuation base ?
can you help me
thank you

Free Goods Problem in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of SD / ABAP(if needed).
Thanks & Regards
Priyanka Mitra

Yes Priyanka
This is a very interesting and a challenging issue or question
I think because of the prorata calculation type the extra 2 units is coming
This logical error has happened to me too
Inclusive 210 units means we have defined as 192 + 18 in VBN1
But the system determines the free goods in sales order as 190 + 20 that means there are 2 units which are going free than what has been maintained as condition record
But system converts our logic into its own thro that calcultion type PRO RATA which is the main culprit here
So it requires ABAP help
This qn should be awarded points (unfortunately i am not able to do so)
Regards
Raja

Assorted Free Goods Problems in Sales Order

Hello All,
The problem is related to Assorted Free Goods Pricing in Sales Order.I have two queries which are provided below with example:-
In the sales order I am giving 2 Line Items. -
Material A & Material B of total quantity 10PC Then 1 PC of the Material C as 3rd line item
in the sales order is populated which is maintained as an assorted free good having Manual Free Item Category for eg. ZFV5.
Similarly line items A & B combined of 10 PC = 1 PC of Material C having Manual Free Item Category for eg. ZFV5.
Again if 10 PC of Material A or B are chosen respectively = 1 PC of Material C having Manual Free Item Category for eg. ZFV5 .
_Now I want to configure the following**_ -
1) The system will include the cost of the Assorted Free Good Item within the Main Item.
2) While raising a Sales Return Order for the above mentioned Sales Order it is observed that the manual free item category ZFV5 is changed to the Return Main Item Category whereas I want the item category to be picked up is Return Free Item Category against the Manual Item category .
Now considering the above scenarios please suggest solutions to attain my requirement.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka

Hi Priyanka
As far as what i understood from your post your requirement doesnt seem to be possible in standards
If you want the cost to be transferred to the main item then in VTFL at item level there is a check box of cumulative cost
That has to be ticked
Constraintsin free goods in R3
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
Regards
Raja

Quantity problem in sale order

Dear Friends,
I had a problem in sales return order. The problem was when i take sales return with the reference to invoice it coping all the data from invoice, up to this point ti is fine, If i changed in line item material quantity 10 insted of 100. In condition it is not reflecting the value, it is capturing hole invoice value insted of picking 10 quantity.I need to solve this problem as a priority 1 so help in this issue.
Regards
Eswar

Dear eashwar
Check the copy control in VTFA whether these are maintained for your item category.
Copying requirements    002
Data VBRK/VBRP         002
Billing Quantity              A
Pos/neg.quantity           +
Pricing Type                  D
I think in either of the above, your settings differs and hence the problem. If it differs, please maintain the above and retry.
thanks
G. Lakshmipathi

Problem in Sales Order Credit Memo

Hello All,
The problem is related to item category ZTAN where we have changed the Completion Rule to B and in VTAF ( Bill to Order Copy Control) under Item details for Credit Memo Request for example from Domestic Invoice to Credit Memo we changed the positive/negative quantity updation to positive. Now after changing the completion rule we were facing a problem where after completion of Sales Process till generation of Invoice the document flow was showing the status as :Being Processed". Then after changing the Completion Rule again to 'blank' the problem of document flow status was solved as it showed the status as "Completed".
Now after doing this change in Item Category for normal sales order we are facing a problem in Credit Memo where again after completion of Credit Memo the document flow status here is showing as 'Being Processed' instead of 'Completed'. Please suggest what configurations need to be done to get the desired result which is in Credit Memo after completion the status will show as "Completed".
Thanks & Regards
Priyanka Mitra

Hello Mr. Shiva Ram,
First of all thanks a lot for your help.The problem of credit memo is now solved but to resolve the status of the existing sales order documents as per your suggestion we have run the program SDVBUK00 in SA38.Still we didn't get the desired result as the status of the completed normal sales orders are still showing "Being Processed" even after running the program.
Please suggest what else need to be done to change the status of the completed sales documents till invoice.
Regards
Priyanka Mitra

Availability check Problem in sales order according MRP sterategy

hi,
We are using strategy 56 for configurable final product and strategy 65
for its variants.Requirement type is "ELV V". According this requirement type,
it is not possible to confirm availability check and then deliver the
sales order. We tried to mark availability check for requirement type ELV V in OVZG Tcode, but the
following error came up: "Check against plan material can only be carried
out w/o avail.check". Is there any setting to handle this problem to work
with strategies 56 and 65? Is it some configuration that we forgot?
Thanks,

Yes, We have maintained planned del. time. and other fields also,
My problem is that, To make assembly of material A we have two component material B and C.
in the sales order of material A, system should check availability of component material B and C.
please help
vikas

Set type problem in sales order integrated into loyalty management

Hi experts,
I try to implement the sales order integrated into loyalty management. As notes said, I should use the set type REWARD_PRO_LOY to assign to a hierarchy for loyalty. But when I use this set type in hierarchy, I found I can only assign it when I choose "service" for product type. Then I find in the "REWARD_PRO_LOY" set type, there is a switch tab. In the tab, there is only "services". I don't understand this tab means. I want to assign this set type to "materials" type. I tried to created a new set type with the same attributes, but it seemed not to work. Is anybody can give me some advice to solve the problem?
Thanks a lot,
Best Regards,
Molly Xin

Hi Molly Xin,
If you refer to your first screen print, its very evident that the product types with which products be created using this set type includes both "Materials" and Services".
We have created similar scenario and were able to create products with product type "Materials".
Pease let me know if you have any issues while creating products with product type "Materials".
Regards

Problem releted sales order

Similar Messages

Maybe you are looking for