Problem removing software

Hopefully this is in the right topic, if not I'll move it or re-post it.
I installed a nice little app called Right Zoom, which lets you click the green button on the top left of any window to full-screen it. Well-known app, no problems, etc... I used AppCleaner to remove it, and rebooted my Macbook. However, clicking the green button in Safari for example will still blow it up to be full screen.
Did I miss something when I removed Right Zoom? I don't want the button to make every single app full screen anymore, but even after uninstalling it, this still happens. I'm not sure what to do. Not a huge deal, but it's annoying.

Check the publisher's website for an uninstall tool.

Similar Messages

What is the best mac trojan removal software

Can anyone recomend the best of these to use:- or another good mac trojan removal software. Thanks
Apple flashback
Mc scan 2.9.4
Pandas anti virus
Magican anti trojen
virus barrier
I works services trojen removal tool Loaris trojen removal

thanks for getting back---
Hi there, I have mac running osx 105 with kaspersky internet security. All up to date. I have not downloaded anything not approved by apple and do not visit sites not approved or certificate. · days my computer was acting strange, files stops uploading on hightail. Then problems really started. I could not do a full scan, after about 3% it said scan complete, that was after 5 minutes, a full scan normally takes 1.7 hours. I opened in safe mode but kaspersky would not open message always said opening. I could not scan. I could however download files in safe so I re installed kaspersky. I then opened mac in normal mode and was able to install new virus. THEN I RAN A SCAN AND IT FOUND 2x trojen-downloader Js.ifr active threats. It removed/ quaranteend them, but sai there was still active trojans and could not remove but all is not OK. I cannot access apple sites, my emails freaking out , I now cannot do full scan-I am wrting this from a PC as I don’t dare play with my Mac until the right help arrives……
Everyone says wipe disk and reinstall. the problem is this trojan does not allow kaspersky do finish scan and find other trojans. So this advice is not good if i cannot find the sourse of the trojan. This trojan blocks me trying to access apple downloads it only gives me access to sites not registered or registered unsafe. Every time i try to access safe sites it switches off my interenet. I have screen shots of all this. People say this is not a mac virus but i have information that claims this trojan can morph into mac. If it is not this then the other trojans still in my system but unknown are th cause.
I really need as i am lost waht to do

Hi I am having problems removing mail from trash folder. Can anyone help please

Hi I am having problems removing mail from trash folder. I can send mails to the folder but cannot delete them permanently from the trash folder. I am using Iphone 3G and anm up to date with OS. Can anyone help please

Check that there isn't a different Trash folder to the one with the proper Trash symbol on it.
If you see one in your list of folders rather than a separate one, highlight it, then click on Mailbox...Use this mailbox for...Trash

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Hi guys i got problem apple software Update i got masage .The feature you trying use is on a network resource that is unavailable. Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box bel

hi guys i got problem apple software Update
i got masage
.The feature you trying use is on a network resource that is unavailable.
Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box below
and i cant find anything please help

This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum. You'll need to include more details, including the version of Windows you have, before anyone can do more than guess as to the problem.
Regards.

HT201210 Having trouble restoring my ipod touch 4 gen. When i click restore i get an error message saying that " problem downloading software for the "ipod owner's ipod"

When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.

There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

I want to download the "FREE" iPhoto duplicate remover software, but the download process keeps asking me for my payment information.

I want to download the "FREE" iPhoto duplicate remover software, but the download process keeps asking me for my payment information. I have tried it several times.. But it says I cannot download this app unless I give my payment information.. So I went back and looked again and again.. and it still says it's "Free"...

You need to contact the authors re download or payment issues - we are only users like yourself and help with iPhoto for the Mac issues
here is Old TOad's list of potential packages including his comments
These applications will identify and help remove duplicate photos from an iPhoto Library:
iPhoto Library Manager - $29.95
Duplicate Annihilator - $7.95 - only app able to detect duplicate thumbnail files or faces files when an iPhoto 8 or earlier library has been imported into another.
PhotoSweeper - $9.95 - This app can search by comparing the image's bitmaps or histograms thus finding duplicates with different file names and dates.
DeCloner - $19.95 - can find duplicates in iPhoto Libraries or in folders on the HD.
DupliFinder - $7 - shows which events the photos are in.
iPhoto AppleScript to Remove Duplicates - Free
PhotoDedupo - $4.99 (App Store) - this app has a "similar" search feature which is like PhotoSweeper's bitmap comparison. It found all duplicates
Duplicate Cleaner for iPhoto - free - was able to recognize the duplicated HDR and normal files from an iPhone shooting in HDR
Some users have reported that PhotoSweeper did the best in finding all of the dups in their library: iphoto has duplicated many photos, how...: Apple Support Communities.
If you have an iPhone and have it set to keep the normal photo when shooting HDR photos the two image files that are created will be duplicates in a manner of speaking (same image) but there are only twp apps that detected the iPhone HDR and normal photos as being duplicates: PhotoSweeper and Duplicate Cleaner for iPhoto. None of the other apps detected those two files as being duplicates as they look for file name as well as other attributes and the two files from the iPhone have different file names.
iPLM, however, is the best all around iPhoto utility as it can do so much more than just find duplicates. IMO it's a must have tool if using iPhoto.
LN

Problem removing a Exchange Federation Trust

Hi,
I'm having a problem removing a Federation Trust. I have removed the Organisation Relationship successfully. However when I go to remove the trust by Powershell I get the following error
[PS] C:\Windows\system32>remove-federationtrust "Microsoft Federation Gateway"
Can't remove federation trust "Microsoft Federation Gateway". It's in use by the following organization(s): CN=Federation,CN=XXXXXX,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXXX,DC=local
+ CategoryInfo : InvalidOperation: (Microsoft Federation Gateway:ADObjectId) [Remove-FederationTrust], Or
gsStillUsingThisTrustException
+ FullyQualifiedErrorId : A17E4A11,Microsoft.Exchange.Management.SystemConfigurationTasks.RemoveFederationTrusts
I cant seem to make other changes to it either, I cant add a domain, remove domain. I have seen references to delete the object in the Schema but dont really want to do that unless I know it wont cause other problems as I need to recreate this.
Ian

There are few things you need to make sure before you remove the federation, like permissions, TXT records etc.
http://technet.microsoft.com/en-us/library/jj657500(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dd297972(v=exchg.141).aspx
http://www.c7solutions.com/2012/03/fix-federation-trust-issues-after-html
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Problem removing Zombie GS

Hey all. Having a problem removing Zombie Gunship from my Game Center. Basically, I want to delete my current progress and start over, thanks to my nephew messing up my config.
So, I've deleted Zombie GS and it prompts me to remove the data and that my progess will be removed from the leader boards. So I do all that, restart it, blah blah blah. After I've reinstalled the app, my old config/progress/money is still there.
I've emailed the game company and of course no response. So what am I missing or doing wrong? Or is this a situation where I can never start over?
Thanks in advance for the help.

I've got the same problem. I am revisiting the game and I want to start again from scratch but it seems Game Center has other plans for me. Dammit Apple gestapo!

Problem removing files with CVS (JDeveloper 10.1.3 Preview)

Hello,
I've got a problem removing files from CVS :
- I right-click on the file I want to remove -> Versioning -> Remove
- The file is removed from local directory, and it appears in "Pending changes" view, on "Outgoing" tab. Its status is "scheduled for removal".
- When I commit the file in the "Pending Changes" view, and click OK, then nothing happens. The file stay with "scheduled for removal" status, and it is not deleted on CVS server.
I tried to commit the package or the project, but it's the same thing.
Files additions and modifications work correctly.
I'm using JDeveloper 10.1.3 Preview version.
Is this a bug ? Or do I do something wrong ? Is there an other way to solve my problem ?
Thanks.

Here is the message displayed in the log window when I remove file (in Versioning menu) :
C:\J2EE\Projets\budgetapptest\src\test\swm>
$ <internal cvs client> remove -l Test_suppr_1.java
cvs remove: scheduling `Test_suppr_1.java' for removal
cvs remove: use 'cvs commit' to remove this file permanently
Here is the message displayed in the log window when I COMMIT the "scheduled for removal" file :
C:\J2EE\Projets\budgetapptest\src\test\swm>
$ <internal cvs client> commit -F C:\DOCUME~1\19363~1.WIN\LOCALS~1\Temp\.jdevcvs_cmt22356.tmp Test_suppr_1.java
cvs commit: Examining .
Thanks.
Message was edited by:
user444728

Problem removing focused object from a table

Hi.
I have a problem removing a component that is focused from a table. The
whole row is removed except a single component (JSpinner) in one row.
My table has three columns, the first two are String fields
(not editable) and the last is a JSpinner. Since there is no
Default cell renderer or cell editor for JSpinner I had to
create them.
So, if no element of the row is focused then calling the function:
public void clearTable() {
setVisible(false);
dataVector.removeAllElements(); // clear data vector
setVisible(true);
works just fine
but if a spinner in a row is focused them that spinner is left alone "floating" on an otherwise empty table.
Questions:
1) Any one has an ideia of what might be the problem?
2) Do I have to play with Focus to solve this? (hate the idea,
since always been told to avoid messing with focus, because
of the problems it normally brings)
Thanks in advance for the help,
Rgds,
Jorge

The problem is that you need to properly stop the editing operation first.if( myTable.isEditing() ) {
    // If you want to throw away any edits use...
    myTable.getCellEditor().cancelCellEditing();
    // If you want to apply any edits, then end use...
    myTable.getCellEditor().stopCellEditing();

Problem removing session attributes

I have a problem removing session attributes
I try w/ mysession.removeAttribute("key");
but it still lives in memory. I've tried setAttribute("key", null) as the API states that will do the same thing, but it doesn't work.
I can get mysession.invalidate() to work, but I want to keep some of the attributes there, while removing another.
I get no exceptions and no errors.
Help.
Running Tomcat 4
jre 1.3.1

Actually,
response.addHeader("Expires", "-1");should be enough.
The browser should then contact the Web server for updates to that page via a conditional If-Modified-Since request. You don't want a cache disabling 'overkill', since you'd still want the page to remain in the disk cache and used in appropriate situations without contacting the remote Web server, such as when the BACK and FORWARD buttons are pressed...
Anyway, try this first, and if it doesn't solve your problem, add the other cache-disabling headers, as outlined in the previous post.
If you're using JSP, verify also that your page has
<%@ page session="true"%>

Problem removing Listener Service in Clusterware 11g

It appears that I already have a listener service as shown below, and I am having problem removing this service so that I can create another. I know that I can just add a new listener service for each node, though if anyone would share some insight on how I can remove this listener service ofr Oracle 11g Clusterware with two node cluster, I would appreciate your insight. Thanks
rac1.respecti.com>./crs_resources.sh
HA Resource Target State
ora.rac1.gsd ONLINE ONLINE on rac1
ora.rac1.ons ONLINE ONLINE on rac1
ora.rac1.rac1.lsnr ONLINE ONLINE on rac1
ora.rac1.vip ONLINE ONLINE on rac1
ora.rac2.gsd ONLINE ONLINE on rac2
ora.rac2.ons ONLINE ONLINE on rac2
ora.rac2.rac2.lsnr ONLINE ONLINE on rac2
ora.rac2.vip ONLINE ONLINE on rac2
rac1.respecti.com>srvctl remove listener -n rac1 -l rac1
PRKO-2203 : Listener is running on node: rac1
rac1.respecti.com>srvctl stop listener -n rac1
CRS-0210: Could not find resource 'ora.rac1.LISTENER_RAC1.lsnr'.
rac1.respecti.com>

Hi, Is there any tnslsnr process running on the node. To understand the problem better, enable the debug trace for the .lsnr resource. You can enable trace by executing the following command as root.
crsctl debug log res "ora.rac1.LISTENER_RAC1.lsnr:5"
crsctl debug log crs "CRSRTI:1,CRSCOMM:2,OCRSRV:4"
Try to stop the listener.
Examine the log files under CRS_HOME/log/$HOST/crsd/* and CRS_HOME/log/$HOST/racg/*
Thanks & Regards
-Harish Kalra

Removing software from leopard.(rookie question) And Pop-up Windows?

I downloaded some photo software that came with the camera, of course it was no good, How do I go about deleting it from my macbook?
Also, I occasionally have began getting a pop up window on my mac, it just comes up and stays in the back ground, I never even notice it until I close everything else down. Any tips on how to do away with that?

normally, removing software is simply by deleting the programme from your applications folder.
say, your unwanted app is called "xxxx"; find "xxxx" in your apps folder and delete. Occasionally, you got an "uninstall" command in your "disk image" (xxxx.dmg) file; you would need to open the dmg file and click on "uninstall" if it's there. Once you know your way around, you'll also find the appropriate "preference" files, which is usually in your home folder/library/preferences, and might be called something like "com.xxxx.plist".
There are programmes around to make this task easy, but I have never used them:
http://www.matterform.com/mac_software/uninstaller/
http://appzapper.com/
These articles might also be of help:
http://guides.macrumors.com/UninstallingApplications_in_Mac_OSX
http://aroundcny.com/technofile/texts/mac031004.html
Enjoy your mac, they are great machines!

I am having problem removing sim from E51

I have problems removing sim from my E51. it seems. its very tight there.

Did you already try these steps?
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
copied from iOS: Troubleshooting activation issues

Problem removing software

Similar Messages

Maybe you are looking for