Problem rendering 3D animation to video
Trying to render a small but high quality version of a 3-second 3D animation to video (using QuickTime, Medium Animation quality) in CS6, running OSX.7.4. On the Ray-Traced Draft setting, it renders to video just fine. But on the Ray-Traced Final setting, less than 1 second renders, then I get "Could not complete your request because of a program error". A partial video file is created where I see my animated object, originally very colorful, has now turned solid black. When i go back to my PSD file after this error, I see my colorful object, but when I hit Play, the object appears black. It is not a hardware or RAM issue. I've troubleshot this problem down to this file, and further, to this one object in this file (it renders fine when i delete the object.) The object is a 3D postcard made from an imported layer that measures 1920 x 720 pixels at 72 ppi. I have deleted it, reimported the original art and recreated the 3D postcard with slightly different movement--same thing. Is the movement too extreme? Would more keyframes help? I have 3 keyframes on the 3D Scene Position timeline which (3 seconds at 15 fps)--the starting position which is out of the frame, then it moves it to the center keyframe where it rotates 60° to fill the width of the document at the final keyframe. Any help would be greatly appreciated!
At the very top of the page it should be in bold. I have a G4 12: iBook and here is what mine says.
ATI Mobility Radeon 9200:
Chipset Model: ATY,RV280M9+
Type: Display
Bus: AGP
VRAM (Total): 32 MB
Vendor: ATI (0x1002)
Device ID: 0x5c63
Revision ID: 0x0001
ROM Revision: 113-xxxxx-125
Displays:
Color LCD:
Display Type: LCD
Resolution: 1024 x 768
Depth: 32-bit Color
Built-In: Yes
Core Image: Not Supported
Mirror: On
Mirror Status: Hardware Mirror
Online: Yes
Quartz Extreme: Supported
VGA Display:
Resolution: 1024 x 768 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: On
Mirror Status: Master Mirror
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Pinkster
Similar Messages
-
Problems when embedding animations (aka videos) in Captivate 4
I am still encountering a major problem with embedded videos.
I have a main project and within this project I am selecting Insert Animation (a swf file).
The problems are many, depending on whether I preview, publish to hard drive, or publish to Connect Pro.
In short, the videos do not play correctly.
Problems include:
- Embedded video will play about 1/2 way and go black (when in preview or published locally);
- The first embedded video on slide 13 (example) will begin playing its audio on slide 1 (when published locally or on Connect Pro)
- Only the first 1/2 second will play before going blank (when published on Connect Pro)
It does not seem to matter what the timing options are or if I select Sync with project.
This issue was discussed in the past, in fact, a solution was found. There is a 3rd party widget made by Michael that solves this embedded video problem. The caveat is that it does not work when the project is saved on Connect Pro.
See this like for more information: http://forums.adobe.com/message/2352409#2352409
I currently have a tier 2 case with Adobe technical support but I am wondering if anyone is doing what I am trying to accomplish and if so, have you found your own solution?
Thank youHi Shawn
I'm guessing the black part goes away when you view the project without Connect Pro in the picture?
I haven't managed to test this yet, but one thought I had was to try creating a one slide Presenter project in Microsoft PowerPoint. Add the Captivate SWF to the PowerPoint slide. Then add the loader SWF as a Presenter Attachment.
My hope here is that the attachment would be stored in the same folder location as the rest of it all. Then Captivate would find it and work with it.
If that fails, you could also try adding the loader SWF and the additional SWF on the same slide as the main Captivate SWF.
You might give that a go and see how far it takes you.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
My mac Mini has problem rendering images and video
THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty. -
Some Problems Rendering With Maya
Hi there! I had submitted a Maya job with my Qmaster and it worked fine with my sime animation sequence and putting up basic materials. Now, I have a quite complex scene and it includes materials and textures. Qmaster renders the animation sequence but it only gives me black and white outputs... the textures were not included!
What seems to be the problem?Hi there! I had submitted a Maya job with my Qmaster
and it worked fine with my sime animation sequence
and putting up basic materials. Now, I have a quite
complex scene and it includes materials and textures.
Qmaster renders the animation sequence but it only
gives me black and white outputs... the textures were
not included!
What seems to be the problem?
Hi,
I haven't used qmaster, but i have extensive experience network rendering with maya, so here goes.
Most likely, your problem is that you are rendering across multiple machines, but the volume names are different. Your file paths must match exactly. For example, on my pc's, all of them have a y: drive. Whenever I need to network render a project, I will just use the y drive and make an exact copy of the directory on each computer. this is also the same format that the renderfarm I use. Unless you have a SAN, you will need to do something similar to this on the mac.
If you poke around, you should be able to find a log file that will show you that textures could'nt be found (missing), and in that case, the renderer render's black.
I am interested in qMaster since I have switched my studio over to mac's and need a good network renderer. If you can post your experience when you get a chance i would like to know how it works for you.
g5 Mac OS X (10.4.6) -
Hello everyone:
OK now I'm having problems rendering. I have about 6m:22sec of video that I need to render. But I get this Render Error:
Insufficient disk space. Free up space with the Render Manager and Retry?
There is no files in the Render Manager Section?
What do I do. The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Any help would be great.
This is not my day
DamonThe project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Fine. But where are the Render files being written to and how much space is on that drive?
Look at your Scratch Disks setting to find out. -
I am making a cartoon, which was created in FLASH,
Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs).
Then I put those Mov's into Premiere. Everything looks crisp until I render. Once rendering is done, the video quality degrades. Here's a screen shot of Premiere:
On the left is the source MOV (exported from AE), on the right is the timeline viewer (after rendering). The quality on the right is degraded. Help?
If I use MP4 versions, exported out of Flash, through Media encoder, quality is not degraded.
(Read on for additional info)
It was easy and quick to create my MOV's out of AE, which is why I did it this way. I'm exporting to MOV's so I can edit quicker in Premiere. I find editing to sound in AE really difficult, and I don't edit in Flash (employees provide SWF files to me).
Here is sequence settings in Premiere (these setting were created by dragging an MOV into the sequence and choosing "change settings" to match clip settings.
Help? Please?I am making a cartoon, which was created in FLASH,
Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs).
Then I put those Mov's into Premiere. Everything looks crisp until I render. Once rendering is done, the video quality degrades. Here's a screen shot of Premiere:
On the left is the source MOV (exported from AE), on the right is the timeline viewer (after rendering). The quality on the right is degraded. Help?
If I use MP4 versions, exported out of Flash, through Media encoder, quality is not degraded.
(Read on for additional info)
It was easy and quick to create my MOV's out of AE, which is why I did it this way. I'm exporting to MOV's so I can edit quicker in Premiere. I find editing to sound in AE really difficult, and I don't edit in Flash (employees provide SWF files to me).
Here is sequence settings in Premiere (these setting were created by dragging an MOV into the sequence and choosing "change settings" to match clip settings.
Help? Please? -
As of yesterday no animation or videos will play from Firefox, but other browsers still work fine. I have checked plugins and even updated to the Firefox 14 beta today, but this did not fix the problem.
this problem started yesterday; before then there was no problem.
I have updated everything I can find, and ran a system restore and disc clean.
The problem still persists. What am I missing here?This happened to me too. This problem started suddenly with no changes made on my part. I had 11.2 Flash version with Firefox 13. I tried updating to the new Firefox, same problem, then updated to Flash 11.3. I even uninstalled RealPlayer.
I read a solution on another forum and it was as easy as clearing my cache. Everything works fine now (even after reinstalling RealPlayer and allowing the download button function). -
File size limitation - rendering out anim codec QT in CS5?
I'm currently having a problem rendering out a composition. The composition is roughly 4000 frames (HD 720p60). I rendering out the scene using quicktime, using the animation codec and if I render out the whole sequence the file size seems to stop growing at 2.15GB and the file is unrecognized by Quicktime; says it's not a movie. If I make a smaller subset of the same composition; say frames 1-1000, the file is about 1.99GB in size and will play in Quicktime.
I tested this out further by rendering out all 4000 frames as individual tif frames and reading them into my co-workers CS3 AE and then making a movie (animation codec) and it works ~ 6.6GB file. Works both on his machine and mine.
Is there a limitation in CS5 AfterEffects that doesn't allow for files greater than 2.15GB. If so, it's going to really mess up my workflow. By the way, I'm running this on a 2 x 2.93 Quad-core Intel Xeon; 16GB Ram, NVIDIA Quadro FX 4800. Running AE in 64-bit mode.
Any ideas!?!?!> Perhaps submitting bug reports/complaints to Apple as well as the feature-request/bug-report form for Adobe will help?
Both are a good idea. If we get more bug reports, then we can get a better sense of how many people are hit by this and either a) elevate the issue more with Apple or b) bite the bullet and engineer some workaround (though I don't know exactly what that would be). -
Problem with youtube and other video websites
I have a problem with youtube and other video websites:
Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
grts,
agrashHmm, so that person had a conflicting plug in.
Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash -
Problem in my MacBook Pro Video Calling in Facebook
I have problem when trying to start video calling in facebook, it always says "The video calling software encountered an error while starting."
and it's very annoying because I can't use video call on facebook.
I tried to follow instructions on how to uninstall video calling in facebook and I've tried to follow this instructions in
https://www.facebook.com/help/247662461917444/
For Mac OS X:
In the Finder, go to your Home directory which is labeled with a house icon and your username.
Open the Library folder.
Open the Internet Plug-Ins folder.
Delete the FacebookVideoCalling.bundle file.
When I tried to look for the said file, it is not inside the Internet Plug-Ins folder.
Is there any problem with my mac? I am using MacBook Pro mid 2012, 10.8.3
I hope someone could help. Thank you.Have you enabled the service yet? Here's a link to enable it on 10.7:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Should be much the same. -
I have a problem with an animated gif.
I have a problem with an animated gif. When I use text in the
flash file the gifs text is all messed up. The text was white in
the flash file but in the gif all the white is splodged all over
where the text was supposed to be and is totally inelegable.OK I found a way around this problem... I delete all the text
that I had created within Flash and recreated it in Photoshop. I
rasterized the type in Photoshop the I saved the files as PSD. I
then went in to Flash and imported them to the library. I place the
images of the text where they had originally been in my Flash file.
When I published it as an animated GIF the file was perfect... No
Black or White blocks...
SO you might try that... I'm not sure what Flash changed, but
I used to create text for animiated gif before without any
problems... -
Problem in loading animated gif
I have problem in loading animated gif with ClassLoader. Here is the code:
ClassLoader loader=this.getClass().getClassLoader();
URL res = loader.getResource(name);
if (res!=null) {
ImageIcon icon = new ImageIcon(res);
if (icon != null) {
Image image = icon.getImage();
if(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
images.put(name,image);
return (Image) image;
} else {
System.out.println("Failed to load "+name+" error "+icon.getImageLoadStatus());
images.put(name,"");
Only when the gif is an animated gif, I get error message: Failed to load and icon.getImageLoadStatus() returns 2. Otherwise, it works.
Anyone encounters the same problem as me?I think the problem is the asynchronous loading of the gif.
when you call f(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
I think it is comming back MediaTracker.LOADING .
for an animated gif, it may not come back COMPLETE until after running thru
the whole automation. instead you could just check:
(icon.getImageLoadStatus() != MediaTracker.ERRORED) -
[SOLVED]Asus UX32VD, problems with ACPI and Intel video driver
1. The bigger problem seems to be Intel video driver:
When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset". From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
Intel driver version: xf86-video-intel 2.20.1-3
2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
[ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
[ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
[ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
[ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
[ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
[ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
[ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
[ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
[ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
[ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
[ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
[ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
[ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
[ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
[ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
[ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
[ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
[ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
[ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
[ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
[ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
[ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
[ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
[ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
[ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
[ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
[ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
[ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
[ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
[ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
[ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
[ 0.000000] 0000000000 - 00cb000000 page 2M
[ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
[ 0.000000] 0100000000 - 012f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
[ 0.000000] RAMDISK: 37a46000 - 37d1b000
[ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
[ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
[ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000c97be
[ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
[ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
[ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
[ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
[ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
[ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
[ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
[ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
[ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
[ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
[ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
[ 0.000000] 0: 0x000ca01e -> 0x000ca032
[ 0.000000] 0: 0x000ca033 -> 0x000ca045
[ 0.000000] 0: 0x000ca06b -> 0x000ca07f
[ 0.000000] 0: 0x000ca080 -> 0x000ca081
[ 0.000000] 0: 0x000ca083 -> 0x000ca084
[ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
[ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
[ 0.000000] 0: 0x000ca90e -> 0x000cad1d
[ 0.000000] 0: 0x000caff4 -> 0x000cb000
[ 0.000000] 0: 0x00100000 -> 0x0012f200
[ 0.000000] On node 0 totalpages: 1019347
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
[ 0.000000] Normal zone: 3016 pages used for memmap
[ 0.000000] Normal zone: 190008 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
[ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
[ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
[ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
[ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
[ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
[ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
[ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
[ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
[ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
[ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
[ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
[ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
[ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
[ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
[ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
[ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
[ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
[ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
[ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
[ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
[ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
[ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
[ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.208 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
[ 0.000032] 00cbc00000 - 00cfe00000 page 2M
[ 0.151118] Security Framework initialized
[ 0.151124] AppArmor: AppArmor disabled by boot time parameter
[ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153673] Mount-cache hash table entries: 256
[ 0.153885] Initializing cgroup subsys cpuacct
[ 0.153888] Initializing cgroup subsys memory
[ 0.153897] Initializing cgroup subsys devices
[ 0.153899] Initializing cgroup subsys freezer
[ 0.153901] Initializing cgroup subsys net_cls
[ 0.153903] Initializing cgroup subsys blkio
[ 0.153938] CPU: Physical Processor ID: 0
[ 0.153940] CPU: Processor Core ID: 0
[ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154505] mce: CPU supports 7 MCE banks
[ 0.154520] CPU0: Thermal monitoring enabled (TM1)
[ 0.154528] using mwait in idle threads.
[ 0.155909] ACPI: Core revision 20120320
[ 0.173638] ftrace: allocating 17828 entries in 70 pages
[ 0.187014] DMAR: Host address width 36
[ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
[ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.187127] HPET id 0 under DRHD base 0xfed91000
[ 0.187335] Enabled IRQ remapping in x2apic mode
[ 0.187337] Enabling x2apic
[ 0.187339] Enabled x2apic
[ 0.187348] Switched APIC routing to cluster x2apic.
[ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.325337] ... version: 3
[ 0.325338] ... bit width: 48
[ 0.325340] ... generic registers: 4
[ 0.325342] ... value mask: 0000ffffffffffff
[ 0.325343] ... max period: 000000007fffffff
[ 0.325345] ... fixed-purpose events: 3
[ 0.325347] ... event mask: 000000070000000f
[ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.365318] Booting Node 0, Processors #1
[ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391966] #2
[ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418597] #3 Ok.
[ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.432363] Brought up 4 CPUs
[ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
[ 0.436881] devtmpfs: initialized
[ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
[ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
[ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
[ 0.439159] NET: Registered protocol family 16
[ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.439288] ACPI: bus type pci registered
[ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488790] PCI: Using configuration type 1 for base access
[ 0.489423] bio: create slab <bio-0> at 0
[ 0.489488] ACPI: Added _OSI(Module Device)
[ 0.489490] ACPI: Added _OSI(Processor Device)
[ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
[ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600414] ACPI: Dynamic OEM Table Load:
[ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601622] ACPI: Dynamic OEM Table Load:
[ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.602615] ACPI: Dynamic OEM Table Load:
[ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.603483] ACPI: Interpreter enabled
[ 0.603488] ACPI: (supports S0 S3 S4 S5)
[ 0.603522] ACPI: Using IOAPIC for interrupt routing
[ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.709614] ACPI: No dock devices found.
[ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
[ 0.710683] PCI host bridge to bus 0000:00
[ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
[ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
[ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
[ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
[ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
[ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
[ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
[ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
[ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.475460] vgaarb: loaded
[ 1.475461] vgaarb: bridge control possible 0000:00:02.0
[ 1.475508] PCI: Using ACPI for IRQ routing
[ 1.477328] PCI: pci_cache_line_size set to 64 bytes
[ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
[ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
[ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
[ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
[ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
[ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
[ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
[ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
[ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
[ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
[ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
[ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
[ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
[ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
[ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
[ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
[ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
[ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
[ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
[ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
[ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
[ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
[ 1.477696] NetLabel: Initializing
[ 1.477698] NetLabel: domain hash size = 128
[ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.477713] NetLabel: unlabeled traffic allowed by default
[ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.479760] Switching to clocksource hpet
[ 1.485853] pnp: PnP ACPI init
[ 1.485869] ACPI: bus type pnp registered
[ 1.486219] pnp 00:00: [bus 00-3e]
[ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
[ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.533253] pnp 00:02: [io 0x0000-0x001f]
[ 1.533255] pnp 00:02: [io 0x0081-0x0091]
[ 1.533257] pnp 00:02: [io 0x0093-0x009f]
[ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
[ 1.533262] pnp 00:02: [dma 4]
[ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.533487] pnp 00:05: [io 0x002e-0x002f]
[ 1.533489] pnp 00:05: [io 0x004e-0x004f]
[ 1.533491] pnp 00:05: [io 0x0061]
[ 1.533493] pnp 00:05: [io 0x0063]
[ 1.533495] pnp 00:05: [io 0x0065]
[ 1.533497] pnp 00:05: [io 0x0067]
[ 1.533498] pnp 00:05: [io 0x0070]
[ 1.533500] pnp 00:05: [io 0x0080]
[ 1.533502] pnp 00:05: [io 0x0092]
[ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.533506] pnp 00:05: [io 0x0680-0x069f]
[ 1.533508] pnp 00:05: [io 0x0200-0x020f]
[ 1.533510] pnp 00:05: [io 0xffff]
[ 1.533512] pnp 00:05: [io 0xffff]
[ 1.533514] pnp 00:05: [io 0x0400-0x0453]
[ 1.533518] pnp 00:05: [io 0x0458-0x047f]
[ 1.533520] pnp 00:05: [io 0x0500-0x057f]
[ 1.533522] pnp 00:05: [io 0x164e-0x164f]
[ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.533579] system 00:05: [io 0xffff] has been reserved
[ 1.533581] system 00:05: [io 0xffff] has been reserved
[ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533606] pnp 00:06: [io 0x0070-0x0077]
[ 1.533620] pnp 00:06: [irq 8]
[ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.533685] pnp 00:07: [io 0x0454-0x0457]
[ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.533764] pnp 00:08: [io 0x0010-0x001f]
[ 1.533767] pnp 00:08: [io 0x0022-0x003f]
[ 1.533769] pnp 00:08: [io 0x0044-0x005f]
[ 1.533771] pnp 00:08: [io 0x0072-0x007f]
[ 1.533773] pnp 00:08: [io 0x0080]
[ 1.533774] pnp 00:08: [io 0x0084-0x0086]
[ 1.533776] pnp 00:08: [io 0x0088]
[ 1.533778] pnp 00:08: [io 0x008c-0x008e]
[ 1.533780] pnp 00:08: [io 0x0090-0x009f]
[ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
[ 1.533858] pnp 00:09: [irq 13]
[ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.533945] pnp 00:0a: [irq 12]
[ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.534008] pnp 00:0b: [io 0x0060]
[ 1.534010] pnp 00:0b: [io 0x0064]
[ 1.534017] pnp 00:0b: [irq 1]
[ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
[ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
[ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.534823] pnp: PnP ACPI: found 15 devices
[ 1.534824] ACPI: ACPI bus type pnp unregistered
[ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 1.541791] NET: Registered protocol family 2
[ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.544346] TCP: reno registered
[ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544464] NET: Registered protocol family 1
[ 1.544482] pci 0000:00:02.0: Boot video device
[ 1.579823] PCI: CLS 64 bytes, default 64
[ 1.579868] Unpacking initramfs...
[ 1.651952] Freeing initrd memory: 2900k freed
[ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
[ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
[ 1.652909] audit: initializing netlink socket (disabled)
[ 1.652920] type=2000 audit(1343310419.543:1): initialized
[ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.655215] VFS: Disk quotas dquot_6.5.2
[ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.655387] msgmni has been set to 7683
[ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.655616] io scheduler noop registered
[ 1.655619] io scheduler deadline registered
[ 1.655674] io scheduler cfq registered (default)
[ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 1.656047] efifb: probing for efifb
[ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.658532] efifb: scrolling: redraw
[ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.661755] Console: switching to colour frame buffer device 128x48
[ 1.664865] fb0: EFI VGA frame buffer device
[ 1.664872] intel_idle: does not run on family 6 model 58
[ 1.664905] GHES: HEST is not enabled!
[ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.665554] Linux agpgart interface v0.103
[ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
[ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.668518] mousedev: PS/2 mouse device common for all mice
[ 1.668581] rtc_cmos 00:06: RTC can wake from S4
[ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.668766] cpuidle: using governor ladder
[ 1.668768] cpuidle: using governor menu
[ 1.668897] TCP: cubic registered
[ 1.669011] NET: Registered protocol family 10
[ 1.669206] NET: Registered protocol family 17
[ 1.669210] Registering the dns_resolver key type
[ 1.669345] PM: Hibernation image not present or could not be loaded.
[ 1.669352] registered taskstats version 1
[ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
[ 1.670074] Initializing network drop monitor service
[ 1.671692] Freeing unused kernel memory: 740k freed
[ 1.671810] Write protecting the kernel read-only data: 8192k
[ 1.677537] Freeing unused kernel memory: 1588k freed
[ 1.680114] Freeing unused kernel memory: 640k freed
[ 1.688393] systemd-udevd[48]: starting version 186
[ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.729878] usbcore: registered new interface driver usbfs
[ 1.729905] usbcore: registered new interface driver hub
[ 1.729967] usbcore: registered new device driver usb
[ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.733581] SCSI subsystem initialized
[ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
[ 1.735298] libata version 3.00 loaded.
[ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.743591] hub 1-0:1.0: USB hub found
[ 1.743601] hub 1-0:1.0: 2 ports detected
[ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
[ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.756431] hub 2-0:1.0: USB hub found
[ 1.756436] hub 2-0:1.0: 2 ports detected
[ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
[ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.757594] xHCI xhci_add_endpoint called for root hub
[ 1.757598] xHCI xhci_check_bandwidth called for root hub
[ 1.757646] hub 3-0:1.0: USB hub found
[ 1.757657] hub 3-0:1.0: 4 ports detected
[ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.757848] xHCI xhci_add_endpoint called for root hub
[ 1.757851] xHCI xhci_check_bandwidth called for root hub
[ 1.757894] hub 4-0:1.0: USB hub found
[ 1.757905] hub 4-0:1.0: 4 ports detected
[ 1.759643] ahci 0000:00:1f.2: version 3.0
[ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.766833] scsi0 : ahci
[ 1.766937] scsi1 : ahci
[ 1.767022] scsi2 : ahci
[ 1.767101] scsi3 : ahci
[ 1.767184] scsi4 : ahci
[ 1.767262] scsi5 : ahci
[ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
[ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
[ 1.767505] ata3: DUMMY
[ 1.767507] ata4: DUMMY
[ 1.767508] ata5: DUMMY
[ 1.767510] ata6: DUMMY
[ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
[ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.087320] ata2.00: configured for UDMA/133
[ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087920] ata1.00: configured for UDMA/133
[ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
[ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
[ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095497] sda: sda1 sda2
[ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.096681] sdb: sdb1 sdb2 sdb3
[ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.173153] hub 1-1:1.0: USB hub found
[ 2.173332] hub 1-1:1.0: 6 ports detected
[ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.415509] systemd-udevd[144]: starting version 186
[ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.465658] [drm] Initialized drm 1.1.0 20060810
[ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.482290] ACPI: Lid Switch [LID]
[ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.483119] ACPI: Power Button [PWRB]
[ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.484548] ACPI: Sleep Button [SLPB]
[ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.494298] ACPI: Requesting acpi_cpufreq
[ 2.507995] i915 0000:00:02.0: setting latency timer to 64
[ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
[ 2.530047] ACPI: AC Adapter [AC0] (on-line)
[ 2.532019] Monitor-Mwait will be used to enter C-1 state
[ 2.532089] Monitor-Mwait will be used to enter C-2 state
[ 2.532122] ACPI: acpi_idle registered with cpuidle
[ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
[ 2.561573] wmi: Mapper loaded
[ 2.564667] iTCO_vendor_support: vendor-support=0
[ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
[ 2.587955] MXM: GUID detected in BIOS
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M" as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
gnome-session[1269]: DEBUG(+): Enabling debugging
gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
gnome-session[1269]: DEBUG(+): fill: *** Adding required components
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1360
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1279
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
gnome-session[1269]: DEBUG(+): Got callback for signal 15
gnome-session[1269]: DEBUG(+): GsmManager: Logout called
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
gnome-session[1269]: DEBUG(+): Unreffing manager
gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0. -
i have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can get my money back
Whatever you read about iTunes is wrong unless you're actually referring to feature movies, not videos. Videos, apps, music and iBooks you can re-download:
http://support.apple.com/kb/ht2519
Download to your computer and then sync to your iPod touch whatever will fit.
And no, I can't say with certainty that they won't give you a refund, but it's unlikely. The most probable outcome, if you do indeed mean movies, not TV shows or other videos, is that they would set up an additional download. For other content they'll probably just direct you to the same instructions on re-downloading I just posted. -
Is there a problem or bug in locking video clips together?
Hi, I have 3 movie tracks masked with one track underneath all 3 for a total of 4 movie tracks. I seem to be having a problem locking down the 4 video layers so things "added" into my masks match up with the main video track outside the mask(s). I've tried using guides and grids and when I get the center point circular X on the yellow t-bar for all 4 lined up, I click on these 4 tracks and use the object lock feature (in the object menu), but it doesn't seem to "lock" for the duration of my entire edit, which is about 2000 frames.
Any idea what I'm doing wrong?
ritaHi Kim,
There have never been any reports of bugs or problems with our serial communication VI's with the specific ASCII character "i". Also no reports about that character in general.
1. All the serial VI's are based on VISA, so you can always make sure that you have the latest VISA driver from our website:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=132060_US
2.You say that you have version 6.0? Did you install the 6.0.2 patch? If not, that would be a good idea too. There were some problems with String and Array functions that got fixed.
Download the patch from this link:
http://digital.ni.com/softlib.nsf/websearch/168AAE428563A9E8862569EC005C5856?OpenDocument&node=132070_US
3. What do yo
u mean with "the serial ASCII output is giving you problems"? What kind of problems? What do you mean with bad lookup? What LabVIEW functions do you use? You need to be more specific.
4. If this is a serial issue,.. Do you have the same problem when doing a serial loopback test with the letter i? Try with the specific ASCII code or just with a normal string.
5. Can you attach a little program that reproduces the problem on your MAC? Please also send specific information about your OS, installed software,...
Regards.
Joris Vanderschrick
Applications Engineer
NI Belgium
Maybe you are looking for
-
Mac mini DVI through AV Reciever with hdmi switching
I have a Harman Kardon AVR445 receiver which had the ability to switch between two hdmi inputs and send hdmi to my television (Viewsonic 27" LCD). I plugged in my mac mini (Intel Core Duo) using a DVI-hdmi cable and my cable box to my receiver. Every
-
BPM workflow not able to reflect the latest changes done.
Hi. I've a BPM instance in QA which got logically deleted after entering into exception block . Now i've made necessary modifications (removing a loop and adding a Switch) in DEV and transported to QA (Repository) successfully. Now QA repository has
-
hi can any one provide basic material for underatanding object oriented in abap...with many sample programs(preferably)....u can also provide me links.... thank you, Ginni
-
Ad hoc reports in Report Viewer control
I've been looking all over the web to find an answer to my bosses question. Can a report viewer control be used to create a report from scratch, or does it have to be a report already designed in SSRS. Edward R. Joell MCSD MCDBA
-
HT1719 I don't see my shuffle in iTunes?
My shuffle has no lights at all and I cannot charge with the adapter (with iTunes). Any suggestions?