Problem rendering MXF files Premiere Pro CC 2014

I'm working with MXF files on a project that has pretty normal cross dissolves etc. The footage is mostly 60p and I'm using the occasional time remapping effect etc. The closer I've gotten to the finished edit now suddenly the timeline will render up to about 90%- 95% then stall slowly rendering for 20-30 minutes or more.
I'm working on a 3.5ghz Core i7 iMac - 32 GB of ram. Up to this point it's been pretty seamless working with these files. I've also upgraded to Premiere CC 2014.
This is very very frustrating at this point though since it seems completely random when a clip might take 3 seconds to render or 3 hrs.

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Similar Messages

Rendering problems with Cineform files Premiere Pro CS6 Mac

Using CS6 Premiere Pro (latest updates) on MAC OS X 10.8.2 with Cineform stereoskopic files. Generally all looks good. Preview is working smoothly. When rendering (H264 Blu ray, MP2 DVD, Quicktime.. does not seem to matter) slowly the number of threads is increasing while rendering and when there are about 2050 threads or so then rendering just halts, CPU load going down, progress stops, rendering never finishes. Anybody having an idea what could be the issue?! Thanks

Okay how should I be exporting the files to use in premiere then? I exported a couple that were just a minute long and they ended up being 2 gb...

Rendering white flicker on the program monitor and output video file. How to get rid of this flicker in adobe premiere pro cc 2014?

Hello,
I have been working with long sequences in adobe premiere pro cc 2014. All of sudden, I see white flicker in the program monitor and rendered output too. The flicker does not follow any pattern. It is very random.
How to work around on this?
Regards
Naveen Alle

Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
Mylenium

Premiere pro CC (2014) problems with audio on .mts files

Hi,
This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
Thanks!

Hi amber1992,
I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
Once done launch the project again and check.
Regards,
Vinay

Why does Premiere Pro CC 2014 renders incredibly slow?

Dear Premiere Pro experts
I created a movie with Adobe Premiere Pro CC 2014 and I have serious performance issues when it comes to export the movie.
The first 10% renders pretty fast and takes 1 hour. Then it takes for every additional 1% about 4 hours! (never rendered it to finish so far, 14% max so far)
Here are some facts that might help to isolate the problem:
Project:
Length: 24 minutes in total, splitted into several sequences (up to 4 minutes) and arranged on a "main-sequence"
Input: Cineform AVI files, 1080p, 59fps (I converted GoPro 3+ footage (3D!) using GoPro Studio to the Cineform format for further processing)
Desired Output: Same as input, preserving 3D (Render 3D Intermediate)
Effects used: Warp-Stabilizer (default settings) and Auto-Color (smoothing 1-2 sec) on almost every clip.
Hardware / Software:
i7-3770K @3.5 GHZ (Quadcore)
16 GB RAM
NVIDIA Geforce GTX 970 (also tried with a ATI Radeon R9 290X)
Windows 8.1
SSD for OS and programs, RAID 0 for media files and project, separate drive for rendering output.
Then I tried to render using AME using the same settings. The whole video rendered in about 14 hours what is acceptable in my case. There problem here is that the 3D gets lost, even if I selected "Render 3D Intermediate". The picture for the left eye is the same as the one for the right eye. This is not happening when I do a direct export. But the direct export get almost stuck at around 10%.
There is almost no difference in choosing Software-Rendering and GPU. Also, the GPU has almost no load. Premiere Pro uses the CPU for about 45% (total usage 65%) and takes up 5-9 GB of memory (total usage 65%). Disk usage at around 14b/s.
I think there are two problems. One is that AME renders differently (no 3D) and the other is that the direct export takes way too long.
Can someone help me with any of these problems?
Thank you,
Martin

I did some additional research and found out, that the slow rendering happens with this combination:
- Auto-Color using Temporal Smoothing
- Render 3D Intermediate
Without rendering the 3D intermediate, Temporal Smoothing is not a problem. And without temporal smoothing, Rendering 3D Intermediate is not a problem.
Might this be a problem in the codec or in Premiere?

Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

Hello
We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
Dennis
(Workstation: Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
Mediainfo of the P2-Cards:
General
Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 3.92 GiB
Duration                                 : 2mn 28s
Overall bit rate                         : 227 Mbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Video
ID                                       : 2
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High 4:2:[email protected]
Format settings, CABAC                   : No
Format settings, GOP                     : N=1
Format settings, wrapping mode           : Clip
Codec ID                                 : 0D01030102106002-0401020201323104
Duration                                 : 2mn 28s
Bit rate                                 : 227 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:2
Bit depth                                : 10 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 2.193
Stream size                              : 3.92 GiB (100%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Mediainfo Audio-Datei P2-Card:
General
Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 13.6 MiB
Duration                                 : 2mn 28s
Overall bit rate mode                    : Constant
Overall bit rate                         : 770 Kbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Audio
ID                                       : 3
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, wrapping mode           : Clip (AES)
Codec ID                                 : 0D01030102060400
Duration                                 : 2mn 28s
Bit rate mode                            : Constant
Bit rate                                 : 768 Kbps
Channel(s)                               : 1 channel
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 13.6 MiB (100%)

Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja

Premiere Pro CC 2014 and Medie Encoder CC 2014 problem

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

I am having a similar problem.
Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
My timeline is 2K, 58 minutes in 23.976
Only effects applied are Lumetri LUTs - no third party.
I've exported as recently as a week ago without issue.
Running OSX 9.5 on an X99 board
3.75 GHz 8-core
64GB 2400 MHz RAM
EVGA Titan Black 6GB
Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
Thanks Adobe, for checking this out.

What is the problem with Adobe Creative Cloud Premiere Pro CC 2014, why it freezes often?

I Purchased the Adobe Creative Productive Premium Suite CS5 in early 2010 and I was very satisfied with it all this time, I can say that I never had a problem while using any of the Production Premium applications. Few weeks ago, I asked Mr. Philip Bloom about a technical issue regarding the best method to use a 50 FPS clip with a 23.976 FPS project, and I got his kind help but he recommended me too that I should upgrade to the latest Adobe Cloud CC 2014 which has many new features added to the different programs. I took his kind advice and downloaded a trial version of all the Adobe Cloud CC programs which I use for my filmmaking business.
Today is the 20th day of my trial period and I have 10 days left to take the decision of continuing with CC 2014 or not. The past 20 trial days were not very pleasant. I want you to share with me the following details which I'll list them as bullet points and I would appreciate diagnosing the problem if you can and suggest a solution for it to re-try the Adobe Cloud CC 2014 for the 10 remaining days with no further problems.
I used to have the Gigabyte graphics card GTX 470 for about 4 years and it malfunctioned last year and I replaced it with a humble Geoforce GT 610 card, but it worked fine with the Adobe Suite CS5 programs.
My system configuration is Intel Core I7 950@ 3.07GHz , installed memory 12 GB. , Windows 7 Ultimate, 64 bit Service pack 1, 3 hard drives 1TB. each (one of them is dedicated for Adobe asset files and the editing work)
For the first 2 or 3 days I used mainly the Premiere Pro CC 2014 establishing short projects for a max. of 5 minutes each and it was working normal. But, later, as soon as I started to build a project which reached about 24 minutes of length and I began to edit those before I add more clips to the timeline, unfortunately, the PrPro CC 2014 started to freeze on any of the frames every time I try to edit normally as I used to do with the CS5, so, I had to wait for 2 or 3 minutes every time it freezes, then it works for seconds then freezes again!! and during the 20 days mentioned above it crashed once.
The movie files of my project are the Nikon's .Mov files and the editing work which I performed included effects such as Color correction (levels) color correction (fast) color correction (Auto) sharpen effect, and stabilizing effect.
I installed the Magic Bullets Suite trial version, and the Neat Video trial version, aiming to purchase either the DeNoiser or the Neat Video (but I tried their effects without saving them to the project).
I used to export parts/ or whole project before finalizing the editing process to be able to monitor on a TV screen (mp4 file format) some of the changes I made in PrPro before being freezed.
Based on my previous 5 years experience using the CS5 Suite I have a strong trust in Adobe, I never thought the problem was in the PrPro application, but rationally I thought it was the graphic card (GT610), and accordingly I purchased yesterday a new Zotac Geoforce GTX 770 (listed by Adobe as an approved card) and I installed it and checked that it is running fine and I checked the processor temperature which was within the normal level.
Only today, I began to think that it might be something wrong with the Adobe Cloud CC 2014 ( a bug or something) and as a result of searching on the internet I could see lot of users since 2014 who were having freezes and crashes with the CC and the CC 2014 versions. That was a shock for me, could it be that until Feb. 2015 the same severe problem still occurs???
Sorry for any inconvenience, looking forward to seeing a solution for that serious problem.

Hello Ashraf,
Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
Thanks,
Kevin

Premiere Pro CC 2014 crashes when loading project file

Hi guys, any help on this is much appreciated as I have a job due in 18 hours and I'm in big trouble if I can't fix this.
I've been editing a project in Adobe Premiere Pro CC 2014 (updated to the latest version) and when I tried to access the same file today it is giving me the error message:
'Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.'
I had saved other version files and they all seem to be working properly so I know it's not my HD that is corrupt. In fact my suspicion is that it has something to do with a blur effect i'm using. The only problem is, I can't even access the file to delete the effect as the project file won't open.
Information about my computer:
I am using a Macbook Pro
OS X version 10.9.4
2.6 Ghz Intel Core i5
Memory 16 GB, 1600 MHz DDR3
Any suggestions/comments would be appreciated.

Guys I solved my own problem - thought I'd share with you how in case anyone else is having this problem -
I came across this thread
Premiere Pro CC error message and crash
which had the suggestion -
"Do tou have after effects installed? If yes, please try to import the main sequence into it and then export it as premier pro project from file/export ootion and then try to open that in premiere pro."
This didn't work for me too but I did try and import my existing project into a new project and copy all the files over. Works fine now.
I don't know if I will have the same issue again tomorrow so I'm going to render out a super high res video before I close premiere just in case

Re-interpreted footage metadata is lost when moving Premiere Pro CC 2014 project file to different computer

Hi guys,
I believe this is just a bug in Premiere Pro CC 2014 (and other versions in the past), but I wanted to make sure it was on the PP team's plate for the next update, since it's detrimental to a workflow that include more than one computer or more than one editor on a project.
My team shoots a lot of footage in slow-motion (for instance, 59.94 for 23.976). Premiere's process to conform this footage is great. Modify -> Interpret Footage -> Assume this frame rate: "23.976".
Unfortunately, when we move this project file to another system, even if we are using a hard-drive that is synced to have the exact same source media files with the exact same file structure, we lose the footage interpretation metadata. Premiere Pro CC thinks this footage is 59.94 again, and our sequences are in shambles. All clips where the interpretation metadata is lost have "zebra pin stripes" on them wherever they exist in our sequences.
We have to manually re-interpret the footage, and then sometimes manually re-select in and out points. This is a work-around that enables us to push forward, but it's a barrier that makes collaborative editing extremely challenging and opens up rampant possibility for error. It's hard to locate every clip we need to re-interpret in some of our more complex projects, and even harder to avoid re-interpreting the wrong clips.
Looking forward to a resolution to this problem.
Daniel Lichtenberg
[ad/link removed by moderator]

Guys I solved my own problem - thought I'd share with you how in case anyone else is having this problem -
I came across this thread
Premiere Pro CC error message and crash
which had the suggestion -
"Do tou have after effects installed? If yes, please try to import the main sequence into it and then export it as premier pro project from file/export ootion and then try to open that in premiere pro."
This didn't work for me too but I did try and import my existing project into a new project and copy all the files over. Works fine now.
I don't know if I will have the same issue again tomorrow so I'm going to render out a super high res video before I close premiere just in case

Premiere Pro CC 2014 very unresponsive while rendering on background with Adobe Media Encoder

Usually while I eddit videos on Premiere, I'm rendering on the background with AME. Or at least I used to. Some time ago, this process suddenly stopped working, as rendering on the background bagan to make Premiere really unresponsive, and quite impossible to work with. I couldn't think of any change I made other than switching my HDD, and I blamed it on that (it made sense because new HDD is one of those WD Green ones, a little worse than my old Seagate one). So I adapted to just queueing everything and start rendering when I was done edditing. But yesterday I installed a 240gb Kingston HyperX SSD, re-installed Windows and the main apps on it, and tried again, hoping to see an improvement. Now I was storing the original media on the HDD, running OS, Premiere and AME on the SSD, and rendering to the HDD. It did not work. Premiere still became slow while I rendering with AME. So I thought it might get better if the HDD was not reading and writing at the same time, and I switched the original media to the SSD, while still rendering to the HDD. Also didn't help. I don't know why this setup suddenly does not work, and I really need to fix it.
My setup:
Windows 7 Home Premium 64bit
Intel Core i7 2600 @ 3.4GHz
12GB of RAM
nVidia GeForce GTX 560 (yes, drivers are up to date)
Dual monitors (one for Premiere workspace and one for a bigger program monitor)
2TB WD Green HDD where I keep most of my junk (and media files)
240GB Kingston HyperX SSD where I run the OS and important apps (Premiere and AME included)
I'm running Adobe Premiere Pro CC 2014 (8.1.0 build) and AME CC 2014 (8.1.0.122 build)

Hi chriscorrell,
Thank you for posting on Adobe forums.
Upgrading your OS might be a good idea because Premiere CC 2014's OS requirement is OS X 10.8.
See here: System requirements | Adobe Premiere Pro
Thanks,
Rameez

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

Hello,
I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
Thank you.

Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?
Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing. Seriously. Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem. Premiere Pro Multicam --> Resolve.
Since we do a lot of multicam work it's something that's important to us.
Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far.

Adobe Premiere Pro CC 2014.2 Trial Version - Error when importing mts and mp4 video files

First time using Adobe Premiere Pro (and I'm using the trial version). When I try to import an mts video file (and tried to import an mp4 file as well), I get the error: Adobe Premiere Pro CC 2014.2 has stopped working. And then the program crashes. Please help.
My computer specs: Windows 7 with Service Pack 1,Processor: Intel(R) Core(TM) i5-4570 CPU @ 3.2GHz, RAM: 4.00 GB, System type: 64-bit

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

Premiere Pro CC 2014 will not import MOV files

As of about two weeks ago, my Premiere Pro CC 2014 stopped importing my Canon MOV files. Never had a problem before. I've had to edit in CC to work around this. They import fine there.

Jim,
I've looked up all sorts of MP4/MOV comparisons on the web ... most conclude that mov is perhaps a bit "safer" on an Apple OS and mp4 "safer" on a PC and non-Apple "devices", but generally list the contents of the two as being nearly indistinguishable. I do realize the Qt has had ... issues ... within the Adobe programs, especially on PC's.
You have any other good info? Always looking to learn from the more experienced ...
Neil

Problem rendering MXF files Premiere Pro CC 2014

Similar Messages

Maybe you are looking for