Problem rendering -- only part of the comp gets rendered

I'm puzzled as to why our comps are only getting the first part rendered. then it stops and the rest looks like a still image. could this be a memory issue?
We're using IMacs with Tiger.
Thank you!

It's all being done from local files, either on the hard drive or on a flash drive. no network involved.
It would seem the iMacs can't handle it for some reason. They hav 1GB RAM and the processor is wGH PPC G5
This morning i tried the same file on a different computer in the lab, (the instructor's computer) a tower, memory: 1 GB, processer: 1.8, 1.8 GHz Power PC
g5, and it works on that one.
I'm puzzled because last year with the same computers we had no problem. It was the previous version of After Effects, fwiw.
While i'm relieved to see that it could work on the instructor's computer, i'd like to know if there's anything that can be done to make the iMacs work too. are there settings i should be looking at in Preferences perhaps?
Thanks much.

Similar Messages

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop. Media content (track names, etc.) do not load. Thanks

When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop. Media content (track names, etc.) do not load. Thanks

See Re: itunes 12 track names not found and user not registered for online use.
tt2

Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click

Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?

The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1. However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind. Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways. iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... . Some of the things that have been excluded by this rule:
track and disc number fields for video media kinds
show and episode fields for music
description tab for audiobooks made up of more than one file
Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI. There are couple of workarounds:
in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners. Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again.

Thunderbolt connection to projector doesnt work: only part of the screen is projected. Solution??

When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

HT1473 Only HALF of the name gets imported

I love classical, however the names of songs are typically long and have a lot of similar words "15 [Orgel Büchlein] Helft mir Gotts Güte preisen, BWV 613."
When I drag the songs into my itunes library only part of the song name is there! "[Orgel-Bchlein]-=Helft mir Go" This is is the name I got from the above song.
Here are some examples of what I mean: , as you can see the name gets cut off.
At this point I'm completly stumped. I have been typing the names in by hand but no one wants to do that!
Any sugesstions?
Thanks
-Tyler

I notice all the titles are exactly the same length in your picture, which leads to me to ask if you are sure this isn't simply the end of the column as it goes into the next column? Do you see three full stops at the end of each title?
Like so:
The ... indicates that the title extends beyond the column's end. Notice the area I have ringed. If you put the mouse over that dividing line, you should be able to click-and-drag the column to the width you want, thus showing more (or all) of the title.
If it isn't that, have you looked at the File/Get Info/Info/Name box to see what is actually typed in there? Again, if it's a really long title, you may have to put the cursor into the field and move the cursor to the end so that the title scrolls.
If the tilte in the Name box is truncated, that suggests that the Gracenote dadatbase that iTunes uses has only what you see. In the unlikely event that this is the case, there probably isn't much you can do about it other than type in the mssing information yourself.

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

Only half of the audio gets imported in Composition!!!

I use After Affects CS6. I have 8 videos. I import them to my Project and then import them all in one composition. Everything is fine: BUT one of the videos, has only half the sound. On top left, I see the green wave sign is full but as soon as I import it next to the other videos in the Composition, only half of the sound gets imported. I check the Audio in the composition for this video and can also see the green wave in half way through.
I tried a new comporistion for this particular video, the same thing. I even closed everything down, open a very brand new project but still the same.
No effect or anything is used. Again, all the 8 videos are being treated 100% indenticall. It is just this one that although the audio gets imported all in full in the Project but as soon as it is imported to the Composition, half of the sound gets disppeared.
Please help me. I have to deliver this project to my customer :(((

The videos come from my Camcorder and in MTS format.
Yes. It opens fine in Premiere and other places. Even in After Effects, It imports all fine in the Project. The green waving audio sign is there to see and all fine. But as soon as I import it to the Composition, only half od the audio gets importet.
Well, like I said, EVERYTHING is 100% the same amoung all these 8 videos. They were shot at the same day, same everything. All the other 7 work just they way they should. Its just THIS one with this issue.
I just even un-installed the AE and re-installed it but still the same. New project, new composition, .. THIS video gets only half audio when in Composition.

Display only part of the STRING field, but search ALL field

Hi all,
I have a field VARCHAR2(4000) that holds a lot of text.
When I make a report in APEX, it shows in each row, ALL text, so the report is very "ugly".
I want to limit the display of that column for only the first 60 characters.
I tried to use the SUBSTR function, that worked, but the search option will search for the text only in that 60 lenght characters, and will now search in the rest (not displayed) part of the field.
Is there a way to do this full search and display only part of the field?
Thanks

You can have the 'substring' column displayed to the user, but have another column which shows the full text lets say it has an ALIAS of "*SEARCH_LARGE_TEXT*" in the report definition(and is among the displayed columns).
You can hide the large text column(SEARCH_LARGE_TEXT) using JS as
$('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
Note: ^= syntax used to match data column even when break formatting used
You can make sure that the column stays hidden even after an IR filter or refresh by binding it to the refresh event of the IR by
$('#apexir_WORKSHEET_REGION').bind('apexafterrefresh', function(){
$('th[id="SEARCH_LARGE_TEXT"],TD[headers^="SEARCH_LARGE_TEXT"]').hide()
change the string "SEARCH_LARGE_TEXT" with your column's alias
Hope it helps

Exporting only part of the Sequence

I do not have any in and out points on my sequence, but when I export, only part of the sequence exports. I have chosen numerous encoding presets, tried placing in and out points at the beginning and end, but it still does not work.

I've tried exporting through DV NTSC and DVCPRO720p60.
Say if I had a 10 minute sequence, then it'd only export 3/4th of it.

Syncing only part of the playlists

Hi,
Is it possible to sync only part of the playlists? It seems that if I remove some of the songs from my hard drives, iTunes removes the files from my iPod as well. For example, in my iPod I have a playlist called ABC that contains a song DEF and GHI. If my hard drive no longer has these songs and the playlist's removed in PLAYLISTS, playlist ABC and the songs in my iPod will be deleted after I do a sync. How do I keep the songs in my iPod when they're no longer in my hard drive?
Thanks,
Sun

If I select just one of the many playlists I want to update, it seems to update just that playlist and remove everything else.
iTunes won't remove anything from the iPod if you are Manually managing your music.
To remove songs from the iPod, YOU have to select the songs and delete them yourself.
Just like if you want any songs on the iPod, YOU have to select them and drag them to the iPod.
So it doesn't do incremental synchronizing?
If you are manually managing your music on the iPod, it doesn't do ANY syncing.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1. The problem is that after inputing the formatting gets lost. Taking in account high popularity of Wordpress I suppose the problem is quite serious.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page word document, some recipients get only one page. Also sometimes when I burn an image from iPhoto on to a disc, only part of the image appears. Why?

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

I have Office 2011 which includes Word. Ever since downloading Mavericks, when I try to send a two-page Word document by email, some recipients get only one page. Also when burning an image from iPhoto (usually no larger than 1mb) on to a disc, only part of it appears. It appears to have been magnified so that only a part of the image appears. Can anyone enlighten me as to what is happening? And how to fix it??

How to copy only part of the music media folder and library to another Mac

Dear friends,
I run iTunes in Mac OS. The iTunes music media folder is now located in an external HD because it´s quite large (2T). The problem is that I´got a second Mac and I´d like to copy -in this second Mac, only part of my music using only its internal HD (300 Mb) . How can I do this copy while preserving art and play-lists?
Thanks in advance

tcynk00 wrote:
how I can transfer only selected pieces of music (all library will not fit anyway)
that's what playlists are for.
and how to maintain transfer process in future when I want to change the music on my nano.
add/delete track to/from the playlist you sync to your device.
JGG

Problem of Missing parts during the Process Order release

Hi
For a Make to Order strategy, I have run MRP for a sales order which resulted in planned order for the material. But when I try to convert the Planned Order to Process Order, I am getting error Parts are missing during the availabilty check even though the components are available in the stock.
But when I create a Process Order manually, I am not facing the problem of missing parts as stock for components are available in stock.
Please advice why I am facing the problem with Planned Orders which are created via MRP.
Regards
Brijesh

Dear all,
If we set the Individual requirement (1) in MRP4 view of the material master for the component, the system will not consider the plant stock and it will give the message like Parts are missing during the Process Order process even though the plant stock is exists for the component.
So I would like to where in customization you define this?
--> To not consider the plant stock if individual req is set (1)
--> To consider the plant stock if collective req is set (2)
Kindly advice,
Regards,
Brijesh

Problem rendering -- only part of the comp gets rendered

Similar Messages

Maybe you are looking for