Problem Replacing pages in Adobe Acrobat 8 Pro

I have a 130 page PDF document with hundreds of links, all of which work and display in their proper position on all pages in original document. I have generated new pages to replace most existing pages & I'm having a problem with the links. Both the original 130 page document & the replacement pages are in landscape 11 X 17" format.  When executing a Document|Replace pages command, the page is replaced but the links in the original document are rotated 90 degrees clockwise as if the command thinks I'm dealing with a portrait document. See below:
The above image shows the problem. The new page has replaced the original page but the original page links are rotate 90 degrees clockwise as I attempted to show with the crude red arrow. The box I'm pointing to should have remained at the lower left corner of the displayed page. I could, of course, removed the links and started all over but I'm hoping there is a simpler solution. I don't look forward to replacing over 1300 links.
Thanks in advance for any suggestions.
Pete K.

I'm having the exact same problem, and I am not about to
redo all of the links. Did you ever receive an answer on this? I'm so beyond frustrated right now.

Similar Messages

  • Problem with page numbering in Acrobat XI Pro

    Hello community,
    I got a problem with page numbering with certain documents in Acrobat XI Pro.
    The next error comes up:
    Translated in English:
    There is an error occured when getting up of page-content.
    This is occured with certain pdf-documents (i cannot uploading this file).
    Is someone have similar problem, or has someone hev a sollution for this?
    Greetings,
    Bart

    This usually means the file is corrupt, probably because it was not created
    using a standard application like Adobe Acrobat.

  • Problem beim installieren von Adobe Acrobat X Pro/Problem when installing Adobe Acrobat X Pro

    Hallo,
    ich wollte Adobe Acrobat von 8 Pro auf X Pro updaten. Dabei kommt jedoch die Fehlermeldung, dass die Systemanforderungen nicht gegeben sind.
    Nun sind die Systemanforderungen aber gegeben.
    OS: Windows XP Professional SP3 (32bit)
    3 Gb Arbeitsspeicher
    Prozessor: Intel Core2-Duo
    Festplattenspeicher ist auch genug frei.
    Internet Explorer ist in der Version 8 vorhanden.
    Alle Systemanforderungen, die auf der Verpackung stehen sind gegeben. Trotzdem lässt sich Acrobat X Pro nicht installieren. Auf anderen Rechnern mit der gleichen Ausstattung habe ich Acrobat X Pro bereits erfolgreich upgedatet. Nur dieser eine PC will nicht.
    Habt ihr schon mal von so einem Problem gehört?
    Würde mich über Tipps oder Lösungen freuen.
    Danke schonmal im Voraus.
    Gruß Top93
    Hello,
    I wanted to update Adobe Acrobat to X Pro. When I wanted to start the installation an error message occured. The systemrequirements aren't given.
    My systemrequirements:
    OS: Windows XP Professional SP3 (32bit)
    3 Gb main memory
    Prozessor: Intel Core2-Duo
    30 Gb free Hard drive space
    Internet Explorer 8 is installed
    So you see the systemrequirements are given. On other PCs with the same configuration I updated Adobe Acrobat to X Pro without any problems.
    Has anyone ever seen such a problem?
    Please help me.
    Thanks in advance.
    Top93

    Ok, ich habe das Problem gefunden.
    Auf dem Pc war Windows XP Pro SP2 installiert. Normalerweise haben wir auf jedem PC bei uns ein Standard Image, welches das Betriebssystem, MS Office und andere Programme, welche hier immer gebraucht werden, beinhaltet. Also habe ich auf diesem PC nicht nach dem Betriebssystem geschaut, da ja auf jedem PC Windows XP Pro SP3 installiert ist. Keine Ahnung warum auf diesem das nicht der Fall war.
    Trotzdem vielen Dank für deine Zeit und Mühe David.
    Gruß Top93
    Ok, I found the problem.
    On the PC Windows XP Pro SP2 was installed. Usually we've got a standard image on all our PCs with the main software like OS, MS Office and other programms. So I didn' look at the OS which is installed on this PC because on every PC is XP Pro SP3. I've got no idea why there was only SP2 on this PC.
    Nevertheless many thanks for your time and your effort David.
    Top93
    (sorry for my bad english ;-)

  • Can i make PDF presentation 'repeat' on Adobe Acrobat X Pro?

    Hi!
    Im a new here, and i have little problem which i hope you can help me.
    So i must do PDF-presentation which repeat after last page. So when the presentation goes last page it must jump first page, and start presentation again. But i cant find where i can do that trick. So could anyone here help me with that problem? Im using Adobe Acrobat X Pro software. So how i can make presentation repeat, or need i some other software?
    I have tried make Action Wizard new action on "document processing" tab and there "set open options" that makes presentation "single page continous", but that dont make presentation to repeat. So i do something wrong, or that is wrong place where i try do that.
    So im little bit stuck with that, and need advices.
    Thanks!

    You can define a Page Action for the last page in the document, and make it reset to page 0. Right-click a page in the thumbnails panel on the left, choose Properties, then Actions.
    To avoid missing the last page and messing about with timing code, the simple fix is to add a blank page to the end of the document, and give it a 'Page Open' action of "Go to a page View" which moves to your first page.

  • Adobe Acrobat X Pro & Adobe Acrobat X Standard questions

    Hi, I'm running into a problem.  I have Adobe Acrobat X Pro on my computer at work, however, I'm finding that my field personnel have Adobe Acrobat X Standard.  I've written some javascripts on a form to automatically calculate when a number is entered into a field.  I'm finding that the form works fine for the folks with Adobe Acrobat X Pro, but does not work for people with Adobe Acrobat X Standard. 
    Is there a specific reason for this?   I've been going nuts trying to find out why this is happening.  I even created the form in Adobe LiveCycle ES2 and the form still will not calculate for those that have Adobe Acrobat X Standard.  In addition to that, it doesn't work with Adobe Reader either.
    Anyone has any idea why this is happening? 
    (I'm going to post this same message over in Adobe Acrobat in case I've put this in the wrong spot.)
    Thanks
    Connie

    Hi thanks for the reply yes the Epson software was up todate
    I have fixed the problem by repairing my Disk Permission and a restart
    cheers Mike

  • Adobe acrobat x pro cannot execute

    I have purchased and installed the Adobe Creative Suite 6 Design & Web Premium 2 to 3 months ago, all the program like photoshop cs 6 can execute without problem, recently I found adobe acrobat x pro did not respond at all either I click the pdf file and I directly call adobe acrobe x pro.  I would like to know the step how to uninstall and re-install the adobe acrobat x pro from the Adobe Creative Suite 6 Design & Web Premium disc or shall I download adobe acrobat x pro from the web site and use the serial number of Adobe Creative Suite 6 Design & Web Premium to re-install.  Thanks

    Hi MkkLam
    The below mentioned link might resolve this issue, kinldy try it:
    LInk:  http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
    Other related thread:
    http://forums.adobe.com/thread/1021632
    Thanks!
    Atul Saini

  • "There was an error processing a page. Out of memory." Adobe Acrobat 9 Pro-Please Help!

    "There was an error processing a page. Out of memory." Adobe Acrobat 9 Pro I had this problem with my last computer over two years ago which was obviously an older version of windows and acrobat and had found a way to solve it but like I said it was an older version and was 2 years ago so I don’t remember how to fix it. I’ve looked through many forums and emptied my temp folder I’ve uninstalled and reinstalled the software I’ve turned off my anti-virus I don't have adobe reader because I know this causes comflicts also and have tried so much more and I’m still having issues with about half my pdf files I cannot figure it out. I use pdf files many times a day and this is really hindering my work so please please please if anyone else has experienced this or knows how to fix it that would be great thank you!!! I’m somewhat computer savvy but not completely so if you cloud please explain to me in slightly less tech terms that would be great too.

    Assuming your disk is not too full, and your virtual memory settings are normal, this is not caused by software clashes, TEMP folders nor fixed by reinstalls. It is Acrobat _actually_ running out of memory, or running out of something else it has a fixed supply of.
    1. Are you using any plug-ins to process files?
    2. After you get this error on a particular file, restart Acrobat. Does the file now open OK?

  • I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

    I have the same  problem. Have paid. Messages say I have downloaded it but the file is inaccessible apparently download is somewhere on my hard disk. How do I find it?? Is there not help at an Adobe phone service. If so what is the number to call??
    Roger Broughton

  • When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

    When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
    i am on a Windows 7 professional PC, 64-bit.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Adobe Acrobat 9 Pro adding a blank page on conversion from Word 2010

    Hi, I'm hoping someone here can help.  I'm converting a Word 2010 document to PDF using Adobe Acrobat 9 Pro (version 9.5.4).  On conversion to PDF, a blank page is being added, throwing the entire report off.  In word, there is a Section Break (Next Page) at the end of the first page, and the text continues on the second.  On conversion, it is after this section break that the blank page apears (i.e., between pages 1 and 2 of the document).  I've been back and forth through the document, tried to use a Continuous Section Break instead (Word just converts it to a page break again), making sure there's only one break, etc., and cannot for the life of me figure out how to fix this problem.  Any ideas?
    Thanks

    Hello,
    I'm sorry you're having trouble with Acrobat. Unfortunately,
    these forums are specific to the
    Acrobat.com website and its set of hosted services, and do
    not cover the Acrobat family of desktop products.
    Any questions related to the Acrobat family of desktop
    products would be best suited in the Acrobat Forums:
    Link to
    Acrobat Forums
    Thanks!
    Michelle

  • Install Adobe Acrobat 9 Pro Extended 30 day trial problem

    I have downloaded and expanded for Adobe Acrobat 9 Pro Extended installation.
    I run AutoPlay.exe.
    It takes me two screens so I can browse cd, read license.......
    and press "Install Adobe Acrobat 9 Pro Extended "
    Nothing happends.....
    I have tried with acrobat pro 8.1 installed and not installed.
    Nothing happends.
    Dir/s gives
    Total number of files
            93 fil(er)        971 974 374 byte
    (      152 katalog(er)  11 709 988 864 byte free)
    any suggestions
    Anders

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

  • I have encountered the following problems with Adobe Acrobat XI Pro version 11.0.9 with OS X  "Yosemite" version 10.0.

    1. PDF files from the Internet can be opened but graphics do not appear. In place of the graphic the area is colored gray.
    2. I use an HP scanner to create PDF documents. I am unable to use Adobe Acrobat XI to scan from my HP Officejet Pro 8600 Plus.  Apple reports an error.  However, I can scan documents to PDF using an HP utility, however, these documents cannot be displayed  by Adobe Acrobat XI Pro, and therefore, cannot be edited or used to create forms.  The documents can be displayed by Adobe Acrobat Reader.
    These problems also existed under the previous OS X system “Maverick”. Please tell me that only a change in setting is required to be able to read and edit these documents created via scan or describe a usable work-around solution.

    Point 1: try turning on "Show large images" in your preferences. In Acrobat for Windows, it's under the Page Display preferences. I'm not sure about OS X.

  • Adobe Acrobat X Pro setup problem

    I have just replaced Adobe Acrobat 8 Standard with Adobe Acrobat X Pro. My computer runs with Windows XP Pro and  I use Microsoft Office Professional 2003. For some reason my mouse no longer works in Word. It works in every other program and works on the Toolbars and buttons within Word but is completed locked out of any document. I assume that Acrobat has altered a setting within Word during the setup process. Can you tell me the quick fix please?

    Thanks for the suggestion. I cannot see how replacing the driver would make any difference when the mouse works everywhere except Word. I have narrowed down the problem. I use Microsoft Outlook for emails which in turn uses Word 2003 as the email editor. The mouse does not work in the text box to write emails. If I close Outlook I receive a message "Do you want to save the changes to PDFM Custom?" This never appeared in Acrobat 8. If I close down Outlook and open Word the mouse works as it should and can select text. It seems likely that Acrobat X Pro has created a conflict within Outlook and my money is on PDFM Custom. There is a new button in Outlook to attach as PDF. I have deselected that in the Outlook Tools/options and it seems that the mouse is now working in Outlook and I can run Word at the same time. Hurrah.

  • Problems printing PDF's using Adobe Acrobat 9 Pro

    During the last two weeks, I have been unable to print a PDF from my Adobe Acrobat 9 Pro. They appear okay on the screen, but print as gibberish.
    After consulting the forums, one workaround suggested was to print as image. Tried it, also prints gibberish.
    Another suggestion to update my printer software, did it. Still prints as gibberish. My priner is an Epston Stylus Photo R220.
    I'm a writer, not a software technician. I am not using a bootleg copy of the program, but an educational version, so Adobe won't offer me any advice over the phone without payment.
    Anything else I could try before paying?
    Diane Loupe
    [email address deleted by host]

    I have same problem as described above, but not always.  Seems to depend on the web page I am trying to print to Adobe. One consistent culprit is Bank of America.  Looks okay until I print to Adobe Acrobat 9 or 10. Then it's gibberish.  i had to copy to Word and then print Word to Acrobat or printer.  
    . Various computers,
    . same problem with either Acrobat 9 or 10.
    . Not a problem printing to Acrobat from a Word or Excel or Outlook document
    . Only from certain websites and not the entire page, only the OCR part. The objects: logos, pictures are okay, only text is messed up.
    Definitely would like Adobe to fix this.

  • Problems with Adobe Acrobat XI Pro

    Last week I installed via Adobe Creative Cloud the new "Adobe Acrobat XI Pro" on my computer. After the installing I couldn´t open it, so I deinstalled it. I thought it is a problem of my computer. I tried to reinstall the software with the Adobe Application Manager, but it says that I allready installed it.. What can I do now?

    I still have an Application Abode Installer manager. Inside this manager I just see, download and install all the adobe programs. After downloading and installing, there is an single folder for each program. Inside this folder is an uninstaller just for that single program. Finally I have 7 folders with 7 uninstallers for 7 programs. Everything works, exept the Acrobat XI Pro. I see all the program folders on my disc, exept the Acrobat XI Pro one (and there was the Uninstaller inside). It don´t exist an Application Folder for all the programs, just the Manager.

Maybe you are looking for

  • Photos mysteriously vanished and iphone won't restore from backup. iOS 6

         Ok well hopefully someone has a good answer for this because I know numerous techs that currently work for apple that are going to have some very colorful stories to tell their familes over dinner about an irate customer they were trying to "hel

  • Changes to MIME objects not updated

    Hi, Our BSP has a LOCAL java script file that is called when the application runs. When we make chages to the local.js file they are saved in the MIMEs but the changes are not getting reflected in the run. Basis performed Transaction SMICM -> Adminis

  • Preview lag problem on Premiere Pro CC 2014

    Hi everything! I have a big problem on Premiere, when I work on every type of file the Program monitor lag too much. I can see one frame every few second! But the audio work well... It seems that the computer have not enough power to show the video!

  • ALV Display options in WD

    Hi friends, Is it possible to display an ALV in Webdynpro, without the border and intermediate lines? Thanks, Sharmila

  • Content Area Export / -page switch

    I am using Portal Production 3.0.7.6.2 under NT. If I try to export a content area using the "-page" switch, then I get the following error in SQLPLUS: SP2-0310: unable to open file "pagename.sql" any ideas what is wrong? tks!!