Problem resizing imported jpg images in flash cs4

when i import a jpg file in flash and then resize this with the transform tool to for example 50% of the original size
then im not getting the same result as resizing it in photoshop.
if i first resize it in photoshop and import the image is smooth and looks the way i want
but if i resize in flash the image gets edgy and not so good.
so is there a way in flash cs 4 to resize the image with the same result as resizing it in photoshop or
similar?

thanks for advice =)
but the size of the jpeg will maintain the same?
seems like that, otherwise i think photoshop is the only option..

Similar Messages

Importing Images into Flash CS4 from Photoshop 7

Hello,
I've created an image in flash, basically the image is a ring which has then been divided into 3 equal segments, each segment exists on its own seperate layer with and has a transparent background. I want to make ach of these segments into a button on flash, so I've imported them across and converted them into buttons, however the problem I have is that when it gets imported into flash, it creates a box around each segment which is what flash sees as the full button, this means when you roll over a blank piece of the segment flash recognises it as rolling over the button. Is this just an inherent problem from importing from photoshop into flash or am I doing something wrong?
Thanks
Sean

Check the settings:
Edit/Preferences.../PSD File importer...
And then load the *.psd file without the background.
And certainly there is no change in flash...

When importing an image into Flash, the filesize is reported incorrectly

I saved an image from Photoshop using "Save for Web" and managed to bring the filesize down to 56.5kb. When I import this image into Flash and click on the properties, the reported "Original" filesize is 1884.6kb which is a heck of a lot more. How can I import the image and retain the filesize without having to compress the image further causing a horrible quality image?

right click one of your bitmaps, click properties and tick "allow smoothing". retest.

How to import an image sequence in CS4

Hello! I am working on a big project today and I'm importing images in by the hundreds. Is there an easy way to import an image sequence into the timeline? I remember there use to be with earlier versions of flash but I can't figure it out for CS4 - Luckily these images are named sequentially. Any help would be much appreciated, thanks!

Ah that was the problem! i needed to import to stage instead of library -facepalm- thank you so much! you've just saved me hours and hours of work! now if i can just get it to import to stage without flash crashing

Color Shift When Importing JPG Sequence into Flash CS6

I am importing a jpg sequence into flash that has been exported from After Effects CS6. No matter what I try, the color will shift when the image imports into flash. The sequence originally started out as a vector graphic in Illustrator (color profile set to sRGB IEC61966-2.1) and then imported into After Effects for an animation that I couldn't quite achive in Flash. The color profile in After Effects is also sRGB IEC61966-2.1 with the "Match Legacy" checkbox checked. I export it out of After Effects as a JPG Sequence and then import into Flash. No matter what I try, the bitmap images' color will shift (become dull) when I import. Even when I open the images in Windows Photo Gallery, they look fine - it's only when I import into Flash. I've also tried PNG and .PSD Sequence with the same result. I've searched around, but still haven't found a solution. Any help is greatly appreciated.

I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.

Can't import an Image into flash

When I tyr to import an Image onto Adobe Flash CS5, the image is balnk with grey outlines.
Same thing happens when I try and copy and paste a image onto flash.

I have created a dad on 9.0.3, and the import works. The dad in both are identical to what I can see. The 10gAS Apache logs has a preceding error message, here is the complete error messesages generated by the 10gAS Apache server when I try to import an application :
[Mon Jun 13 08:58:13 2005] [warn] [client 172.22.101.206] [ecid: 1118671093:172.23.5.52:11116:0:1608,0] mod_plsql: DMS Logging: Unable to open/create /modplsql.lck
[Mon Jun 13 08:58:13 2005] [error] [client 172.22.101.206] [ecid: 1118671093:172.23.5.52:11116:0:1608,0] mod_plsql: /astech/wwv_flow.accept
HTTP-404 ORA-00904: "CONTENT": invalid identifier
I have searched metalink for anyting on the "modplsql.lck" error and have not found anything.

Is there a way to only import jpg images from a CF card?

I use a Canon 20D, and save all my pictures as RAW and Small JPG on mij CF card.
Wgat I would like to do is whenever I put my CF card in my card reader, have iphoto only import my jpg images on my MacBook
Is there an easy way to do this? Now I get all my pictures double, both JPG and RAW in my library ...

Duco
Use Image Capture (in your Applications Folder) to select what pics you want to move to your Mac, then after, import them to iPhoto.
Regards
TD

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

Color problem on some jpg images

Suddenly it happens that some jpg images look almost black (very high level of contrast). I use a Samsung SyncMaster 245B monitor and I had never this effect before. I uninstalled Photoshop Elements and reinstalled, but the problem remains.
Other jpg pictures look normal, but I am unable to understand any difference in the original files.
The same bad pictures look fine if I open them with PaintShop Pro, this could bring me to consider a bad setup of Photoshop Elements ... but which one ?
Can you help me in finding a solution ?
Thanks

I agree with your comment. But what I don't understand is:
1) The monitor was calibrated and no changes done. The problem don't was present days ago.
2) Why only some jpg show this problem, while others generally are shown OK. I may add only that the bad ones are larger in pixels.
Thanks for your answer.

Importing jpg images

Is there a limit to the number of jpg images I can import into an iMovie HD project? I plan to make this into an iDVD project.
Thanks!

Brie Fly wrote:
. .. the shortest clip from a still that iMovie will record is 3 frames..
we had that debate a long time ago and obviously..
(actual screenshot, not 'processed', no fake, no photoshopping.....)
.. I'm the only one on this planet, able to set the shortest duration to 00:00:01
aside two things:
what is such a kind of 'movie'?
and, for stop motion etc. there're other, more designated tools..

Importing jpg images saved in Photoshop into iPhoto'11 albums

I edited some photos in Photoshop, saved them as jpgs and then tried to import them into an iPhoto '11 album without success. Although I saw a green plus sign, the photos did not appear in the album. I have done this without a problem in an older version of iPhoto (7?) on an older computer. Why won't it work now and how do I get the edited photos into my album?
Thanks.

You can't import to an Album. You import to the Library and then you add them to a Library. Check your Library those images will be there.
Regards
TD

Problem when importing vmware images

Hello,
I've tried to import a few vmware images into oracle vm but so far all have failed. The error in the mainlogs point to severe but really don't say a thing...
Can this be an issue with cpu families? ie coming from an AMD Opteron cpu(vmware 4 server) to an intel xeon cpu(oracle vm server)
If this should be possible, what's the best way to start troubleshooting this kind of issues?
J

The import process in OVM cannot deal with ESX,ESXi or vSphere VMDK-flat's directly. You need to export the VM using VirtualCenter and export it in a Vmware player/workstation 2.x format. Then move the exported files to OVM and re-attempt your import.
I ran into this exact problem a week ago. Its a shame OVM cant just import plain-old ESX-formatted images, maybe OVM 3.0 can deal with it?

Importing external images into Flash using ActionScript 3.0

Hey Guys!
What i'm trying to do it import a few (say four) images from
an external
folder at random and display them in a row. The folder would
contain up to a
hundred pictures, sequentially named (ie. 1.jpg, 2.jpg,
3.jpg, 4.jpg,
etc...)
any suggestions on how I could do this??
thanks,
-Chris

thanks for getting me started! Is there a way to get the four
images
directly out of an external folder, though?
thanks,
-Chris
"kglad" <[email protected]> wrote in message
news:f7eop9$8um$[email protected]..
> here's code to get you started. this allows you to
select 4 of your
> images at
> random. then use the loader class and its load method to
start your loads
> and
> use its contentloaderinfo property to attach listeners
to detect if
> there's
> been a load error (so you can load another) and load
completion (so you
> can
> position your images):
>
>
>
> Array.prototype.shuffle = function() {
> var p:int;
> var t:int;
> var ivar:int
> for (ivar = this.length-1; ivar>=0; ivar--) {
> p=Math.floor((ivar+1)*Math.random())
> t = this[ivar];
> this[ivar] = this[p];
> this[p] = t;
> }
> };
> var tl:MovieClip=this;
> var swfNum:int=100;
> var num:int=0;
> var i:int;
> var swfA:Array=[];
> for (i=1; i<=swfNum; i++) {
> swfA.push(i+".jpg");
> }
>
> swfA.shuffle();
>
> // swfA[0], swfA[1], swfA[2], swfA[3] contain references
to 4 of your
> images
> randomly selected. if one of them doesn't exist
> // use the ieError event to select the next one at
random: swfA[3] etc.
>

Problem with importing still images

When I import images for creating a time-lapse video, some of the images are automatically being rotated +90 degrees. If I go through an manually correct them, they end up not be in the correct position or the correct scale (even though scale says 100 for all of them).
How do I prevent the autmatic rotating of still images?
Thanks,
Ricky

Check its properties in Windows Explorer. If that shows it as 664x1000 then PRE is importing correctly and IrfanView is 'auto-correcting'.
I seem to recall that IrfanView does "non-destructive" Rotation, unlike PS/PSE, where the actual pixels are rearranged, and are exported in that condition, with Save/Save_As. Might be something in the IrfanView Rotation scheme? Just a guess on my part, too, but I would anticipate that the Rotation in IrfanView is getting in the way, as other programs do not see the full effect of that scheme.
Not sure what "image viewers" are installed with Windows, but I would Open one of those problem files in, say Windows Paint, or Windows FAX Image Viewer, or something else than IrfanView to test.
Good luck,
Hunt

Imported jpg Images

I am using CF9 to design and print business cards for our clients. I have a client who wants an image on the entire back side of the card. The pdf size is set to 3.5 inches by 2 inches. The image is set to the same size and saved as a jpg.
When I run the card, the proof looks fine on the front, but on the back where the jpg should go edge to edge, it leaves a border around the left and top of the card...it actually shifts the image down and right. I have set the image to align center, and my margins are all set to 0.0
I've tried enlarging the image, but it just pushes it more to the right and down...it's like there's some invisible border on the top and left of the card. I added the top=0 and left=0, but it hasn't changed anything.
How do I get this image to import and go edge to edge properly? What am I missing?
Thanks!
--n00b
<cfdocument
format="PDF"
filename="order_#Form.card_id#_bc.pdf"
overwrite="yes"
pagetype="custom"
pageheight="2"
pagewidth="3.5"
margintop="0.0"
marginbottom="0.0"
marginright="0.0"
marginleft="0.0"
unit="in"
fontembed="yes"
localurl="yes">
<cfdocumentsection>
      <div id="back" align="center">
       <img src="business_card_back.jpg" top="0" left="0">
      </div>
     </cfdocumentsection>

You could try this.. not sure if it'll work but might be worth a try..
<div id="back" align="center">
<img src="business_card_back.jpg" top="0" left="0" border="0" alt="">
</div>

Problem resizing imported jpg images in flash cs4

Similar Messages

Maybe you are looking for