Problem restoring/adding files

I have a problem restoring it, because it says I'm not connected to the internet. Even though I can still get online and everything.
Also, I cannot add files from my hard drive to my ipod, nohing shows up on the actual Ipod.
Can anyone help me please?

I do experience the same.
Can I restore my iPod Nano without internet connection?
Any response will be very helpful.
Windows XP Pro

Similar Messages

Problem restoring my files after system recovery

Hey so, I just recovered my system. The process had me backup all my files on an external harddrive. I now am trying to restore the files from the harddrive using the cyberlink recovery manager, the problem is that, everytime I run the app it freezes after about an hour. The progress bar remains at 0% even though i see files being copied below it. Any ideas on how to circumvent this? Do i need to use recovery manager? All the files in the folder are in some format that looks as though theyre useless without an app configuring them.

There is usually one file in the backup that has .EXE extension, maybe be named Restore.exe or Recovery.exe. Clicking it extracts the files.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problem Restoring a File

When I tried to restore a file, part of the folders would be restored fine, but then I got this message:
"The operation can’t be completed because you don’t have permission to access “Research”."
(Note: "Research" is the name of the file I was restoring).
What can I do to fix this?
Jan

Well, it's been a while, but maybe anyone can still use the solution to your problem:
The reason for the error message is that the Disk Utility needs to checksum scan the source in order to restore it on a medium like a USB stick. It can do that only if the source image is mounted read/write. Unfortunately, some images are read-only, and although there is an option to convert the images, a read-only image cannot be converted to a read/write image.
The solution is to make a new image, copy the contents of your original image there with "cp -a <source> <target>", and then you can use that new image to restore to the usb key.
Aaaand done...

Adding file name in the sender Adaptor

Hi ,
I am facing some problem in adding file name .
The scenario is like this :
The file needs to be send from on system and needs to be Archived . Once processed, the archived file should be prefixed with ARCH_ so that it is not picked up again .And the other thing given is the file name used will be of the format XXX_YYY_nnnnnnnnnn.DAT where nnnnnnnnnn is the date stamp .
Please help it's urgent ......
Thanks and regards
Anita

Hi,
if you can have XML achvived files you can use
standard
processing mode: Archive
with one swich you can set the timestamp mode
yyyMMdd-hhMMss-SSS_.
ref
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
michal

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Problem restoring files from a Time Machine Backup! HELP!

Heya,
I have Snow Leopard and have been using Time Macine regularly since May.... I never needed to restore any file until now...
Deleted some must have stuff.. and emtird the trash (of course!).. so went to time machine to restore it...
Looked it up... nice interface.. have stuff since May 2011... nice.. found the 10+Gb of stuff I had deleted.. and restored... Pffffew!
Opend the file... Bzzzz! you loose... file is currupt,,, what?
load again.. still no go? files all look the right length m.. hmm very strance... can;t open then... lets try a simeple file...
restore a text file... size ok.. but... EMPTY!
use HexEdit to open the text file... All ZERO's!
check the otehr files I restores ALL ZERO's!
DOH! restore files I saved into safe old Time machine in May 2011... AL ZEROS!!
***! Everything is ZERO! my last 6 months worth of time machine backups is all gone! Directory structures say they are there.. file sizes are ok.. but NO DATA!!!
Can somone please HELP ME!
G./

Open Disk Utility. Click once on the external drive left-most icon (not the indented volume name/icon); what does it indicate for Partition Map Scheme? Also, do you have an Intel Mac or a PPC Mac?
Now click "Verify Disk" and see if it finds errors or if it reports "ok."
What I am hoping (this is something of a long shot) is that there will be errors found on the disk that Disk Utility can repair and then your data will be properly associated with the file names and headers. "Verify" simply reports back on the state of the file system and can do no harm; only when you click on "Repair" will it actually try to repair anything. You might want to report back first on the results of "Verify" before trying to "repair."
By the way, this Verify (or Repair) procedure can take ~ hours for a large disk that is mostly full. I did this recently on an external Time Machine drive that was 1.5 TB in size and 2/3 full and it took ~ 3 hours.
If severe errors are found on that disk, something stronger than Apple's Disk Utility might be called for, such as Disk Warrior. Hence better to report back here before roceeding with any "repairs."
The type of error I am hoping you might have is in the file system that relates the filenames and their header (and file sizes) to the locations around the disk where the actual data inside the file are located. If that file system gets damaged, your computer will have trouble finding the actual data that goes with each file. Hence getting zeros when you should have gotten data. Sometimes this can be fixed, sometimes it cannot. Often it can. If the problem is caused by a physical problem with the disk, the likelihood of recovery is low. If the problem is with the file system/mapping to the data on the drive, it very well might be fixable.
Have you had any power failures, system freezes, improper or disorderly computer shutdowns, etc. or unexpected dismounting of the backup drive anytime since you have been using it? Have you ever gone into that external backup drive in the finder and changed any of the files on it yourself, or has it only been touched indirectly through Time Machine?

Problem when adding ascx user control in the MasterPage: Parser Error Message: The referenced file ... is not allowed on this page.

Hello,
I have to maintain a SharePoint 2010 project, in which a TopNavigation User Control for SiteCollection is registered in the MasterPage in this way:
<%@ Register TagPrefix="ABC" TagName="TopNavigation" src="~/_layouts/ABCApplication/MainSite/Navigation/TopNavigation.ascx" %>
<asp:ContentPlaceHolder id="PlaceHolderTopNavBar" runat="server">
<asp:ContentPlaceHolder id="PlaceHolderHorizontalNav" runat="server">
<ABC:TopNavigation ID="TopNavi" XMLDataLocation="/_layouts/ABCApplicatopm/MainSite/TopNavigation.xml" IsRoot="true"
runat="server" />
</asp:ContentPlaceHolder>
</asp:ContentPlaceHolder>
When I deploy the SiteCollection, the TopNavigation user control is working correctly. Unfortunately when i modify the masterpage over SharePoint Designer, the following error message comes allways, regardless of the art of changes i did in the MAsterPage
( even if I open the MasterPage, add an space and do save/close the MasterPage).
"Problem when adding user control in my custom master page, Parser Error Message: The referenced file '/_layouts/Navigation/TopNavigation.ascx' is not allowed on this page."
Any ideas?

Hi Simon,
When we use UserControl in SharePoint Page or MasterPage, and the UserControl is kept in any folder other than ControlTemplates, we will got the error. Here is an article about this issue and provided the solution:
http://sharepoint-tina.blogspot.com/2009/07/referenced-file-pathxyzascx-is-not.html
The solution can also be used in SharePoint 2010.
Qiao Wei
TechNet Community Support

I am having problems adding files to my external hard drive. Can anyone help me?

I can't add files to my external hard drive from my computer. I keep getting a message saying that the hard drive can't be modified. I've added files to it before, I'm not sure why it's not working now. I looked at the hard drive information and it says that it is set to read only. Does anyone know how to change that or what I should do? Thanks.

Odd, it seems. In the Finder "Get Info" display, you are seeing something like this?
Click the "Details" triangle and then the little padlock, and you should be able to change the permissions. Click the lock when you are done and close the Info window.

R & R problem restoring files from usb hard drive

First, I am new to the forum so forgive me ahead of time if I violate any rules...
My probelem involves:
Rescue and Recovery 4,21
Thinkpad x61 Tablet
Vista Business 32 bit, Service pack 2
USB hard drive
Here are the details - I restored my system from a backup (on a usb hard drive) using R & R. I chose the option to save the files that were created or changed since the backup to the usb hard drive. The restoration was successful (mostly - so far). However, I have been unable to restore individual files from the usb hard drive that I saved as part of the restoration process. I can see the files on the usb hard drive, but they do not appear when I attempt to restore them using R & R. How can I restore these individual files? Thanks in advance.

Mmm ok thanks I'll look I to that then. To be honest, HFSExplorer has been pretty good but sometimes doesn't work. So I'll check out what you suggested.
Thx

I am having problems when adding mp3

So when I sync the whole ipod touch, it's fine, but when I try to sync music or manually add music, i get some error windows.
When I first got the ipod in Jan2010, it was fine when I manually added mp3s, but recently I tried to add more music, it wouldn't allow me to.
I tried restoring to factory settings and restore from my back up, it didn't help.
I disabled my anti-virus (CA), still having trouble adding mp3s manually or syncing.
Everything else related to syncing works.
I tried my other ipods for this current PC and I was able to add music to those, but still not with the ipod touch.
http://sehanafortress.com/help/ipoderrors_201005may0001.jpg
http://sehanafortress.com/help/ipoderrors_201005may0002.jpg
http://sehanafortress.com/help/ipoderrors_201005may0003.jpg
http://sehanafortress.com/help/ipoderrors_201005may0004.jpg
http://sehanafortress.com/help/ipoderrors_201005may0005.jpg
Windows XP
iTunes 9.1.1.12
ipod touch 3.1.3
Thank You
Message was edited by: sehana

Many thanks.
Okay ... swinging into "basic principles" troubleshooting mode. I'm suspecting most strongly either a damaged pref file or library file here. If that's what is going on, then these errors should be specific to a single Windows user account on the PC (because there's a different set of iTunes preferences files and library files for each different Windows user account on the PC).
So I'd like to do a little experiment to check to see if this is a user account specific or system-wide problem on the PC.
Quit iTunes if you have it open. Head into your User accounts control panel. Create a new user account with full administrative rights.
Now log out of your usual user account and log into the new account. (Don't use fast user switching to move between accounts.)
Launch iTunes in the new user account. The iTunes set-up assistant will run. Don't add any files to iTunes when prompted to do so ... just let iTunes eventually launch to an empty library.
Now in iTunes go "Edit > preferences". Click the Devices tab. Make sure the "Prevent iPods, iPhones and iPads from syncing automatically" checkbox is checked and then click OK.
Now add a small number of mp3 to the new empty library. (Preferably, make them files that have transfered successfully to the ipod in the past.)
Now try attaching the iPod. Do not associate the iPod with the empty library. Now try checking that "manually manage" setting.
Attempt to do a manual transfer of the mp3s to the iPod from the new library. Do they transfer across without the error messages?
Now add a small number of the files that haven't synced successfully to the iPod (in the usual user account) to the iTunes library in the new account. Again, try a manual transfer of some of those files to the iPod. Do those transfer without the error messages?
(If both types of manual transfers take place without errors in the new account, that strongly suggests we should try to fix any library file or pref file issue in the usual account. If just the new mp3s refuse to transfer, then I'd be suspicious about a problem with the files themselves. If both types of files refuse to transfer, that would tend to rule out a library file or pref file issue, and we'll start checking on other possible causes of the issues.)

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

How to get latest added file from a folder using apple script

Hi..
I am trying to get a latest added file from a folder..and for this i have below script
tell application "Finder"
    set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
    set fileName to latestFile's name
end tell
By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.

If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
set theFolder to choose folder
tell application "Finder"
    activate
    set theFolderWindow to container window of theFolder
    set alreadyOpen to exists theFolderWindow
    tell theFolderWindow
        open
        set theInitialView to current view
        set current view to icon view
    end tell
end tell
tell application "System Events" to tell process "Finder"
    -- Arrange by None:
    set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "0" using {control down, command down}
    -- Sort by Date Added:
    set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "4" using {control down, option down, command down}
    -- Get the name of the last item:
    set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
    -- Restore the initial settings:
    click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
    click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
end tell
tell application "Finder"
    set current view of theFolderWindow to theInitialView -- restore the initial view
    if not alreadyOpen then close theFolderWindow
    set theLastItem to item theItemName of theFolder
end tell
theLastItem
Message was edited by: Pierre L.

Problem with attaching file to Sales Order

Hello,
In my company we have the possibility to attach files to sales orders, e.g. pdf files with the printing details.
These files are added by the GUI user, this works fine.
Now we have an extra order creation stream in which a pdf file has to be added to the SO without user interaction.
I found a helpful link ( /people/rammanohar.tiwari/blog/2005/10/10/generic-object-services-gos--in-background )
This program creates URL links with no problem, but the file generation is not implemented yet.
I tried to add the file functions to his sample report but still have one problem. The file is uploaded, but not reported as a PDF file in sap. If I select the created attachment SAP allows only the saving of the attachment. After saving the created file is a good PDF file, it opens with PDF-viewers.
Why does SAP not know this is a PDF file and report it as such (and open the pdf viewer when selected).
Thanks, Frank.
source-code:
REPORT zzfb_brc                                .
* Report Z_RMTIWARI_ATTACH_DOC_TO_BO
* Written By : Ram Manohar Tiwari
* Function   : We need to maintain links between Business Object and
*              the attachment.Attachment document is basiclally a
*              business object of type 'MESSAGE'.In order to maintain
*              links, first the attachment will be crated as Business
*              Object of type 'MESSAGE' using Message.Create method.
*              Need to check if we can also use FM
*              'SO_DOC_INSERT_WITH_ORIG_API1' or SO_OBJECT_INSERT rather
*              than using Message.Create method.
* I took this program and removed all the parts for adding URL's and
* notes.
* Include for BO macros
INCLUDE : <cntn01>.
* Load class.
CLASS cl_binary_relation DEFINITION LOAD.
CLASS cl_obl_object      DEFINITION LOAD.
PARAMETERS:
* Object_a
   p_botype LIKE obl_s_pbor-typeid DEFAULT 'BUS2032',    "SO
   p_bo_id LIKE obl_s_pbor-instid DEFAULT '0000757830', "example number
* Object_b
   p_docty LIKE obl_s_pbor-typeid DEFAULT 'MESSAGE' NO-DISPLAY,
   p_msgtyp LIKE sofm-doctp        DEFAULT 'EXT'     NO-DISPLAY,
* Relationship
   p_reltyp LIKE mdoblrel-reltype DEFAULT 'ATTA'.
TYPES: BEGIN OF ty_message_key,
        foltp     TYPE so_fol_tp,
        folyr     TYPE so_fol_yr,
        folno     TYPE so_fol_no,
        doctp     TYPE so_doc_tp,
        docyr     TYPE so_doc_yr,
        docno     TYPE so_doc_no,
        fortp     TYPE so_for_tp,
        foryr     TYPE so_for_yr,
        forno     TYPE so_for_no,
       END OF ty_message_key.
DATA : lv_message_key TYPE ty_message_key.
DATA : lo_message TYPE swc_object.
DATA : lt_doc_content TYPE STANDARD TABLE OF soli-line,
       ls_doc_content TYPE soli-line.
* Create an initial instance of BO 'MESSAGE' - to call the
* instance-independent method 'Create'.
swc_create_object lo_message 'MESSAGE' lv_message_key.
* Upload the pdf file, for now from the frontend, in the future from
* the server.
DATA:
* dsn(40) TYPE C VALUE '/usr/sap/trans/convert/1.pdf', "server location
l_lines TYPE i. "filelenght
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename   = 'c:t1.pdf'
    filetype   = 'BIN'
IMPORTING
    filelength = l_lines
TABLES
    data_tab   = lt_doc_content.
* no exceptions, the file is there in this example
break brouwersf.
** the coding for the server input, for later
*OPEN DATASET dsn FOR INPUT IN BINARY MODE.
*IF sy-subrc <> 0.
* EXIT.
*ENDIF.
*READ DATASET dsn INTO ls_doc_content.
*WHILE sy-subrc EQ 0.
* APPEND ls_doc_content TO lt_doc_content.
* READ DATASET dsn INTO ls_doc_content.
*ENDWHILE.
*CLEAR ls_doc_content.
*CLOSE DATASET dsn.
* define container to pass the parameter values to the method call
* in next step.
swc_container lt_message_container.
* Populate container with parameters for method
swc_set_element lt_message_container 'DOCUMENTTITLE' 'Title'.
swc_set_element lt_message_container 'DOCUMENTLANGU' 'E'.
swc_set_element lt_message_container 'NO_DIALOG'     'X'.
swc_set_element lt_message_container 'DOCUMENTNAME' p_docty.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
swc_set_element lt_message_container 'DocumentSize'    l_lines.
swc_set_element lt_message_container 'DocumentContent' lt_doc_content.
swc_call_method lo_message 'CREATE' lt_message_container.
* Refresh to get the reference of create 'MESSAGE' object for attachment
swc_refresh_object lo_message.
* Get Key of new object
swc_get_object_key lo_message lv_message_key.
* Now we have attachment as a business object instance. We can now
* attach it to our main business object instance.
* Create main BO object_a
DATA: lo_is_object_a TYPE sibflporb.
lo_is_object_a-instid = p_bo_id.
lo_is_object_a-typeid = p_botype.
lo_is_object_a-catid = 'BO'.
* Create attachment BO object_b
DATA: lo_is_object_b TYPE sibflporb.
lo_is_object_b-instid = lv_message_key.
lo_is_object_b-typeid = p_docty.
lo_is_object_b-catid = 'BO'.
*TRY.
CALL METHOD cl_binary_relation=>create_link
EXPORTING
    is_object_a = lo_is_object_a
    is_object_b = lo_is_object_b
    ip_reltype = p_reltyp.
* Check if everything OK...who cares!!
COMMIT WORK.

Hi,
Welcome to the SDN Forums!!!
You need to supply the PC file extension in the container element 'DOCUMENTTYPE'.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
In your case change the above statement as below:
swc_set_element lt_message_container 'DOCUMENTTYPE' 'pdf'.
<b>OR</b> change the default value of p_msgtyp to 'PDF'.
Cheers,
Ramki Maley.
Please reward points if the answer is helpful.
For info on awarding points click on this link: https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm
Message was edited by: Ramki Maley

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Problem with adding Sun JSF RI v1.2 as a new library in JDeveloper 10.1.3.1

Hi,
I have a problem with adding a latest JSF 1.2 RI from Sun (https://javaserverfaces.dev.java.net/files/documents/1866/44998/jsf-1_2_03.zip) to JDeveloper as a new library.
I created a new User library and added into it jsf-impl.jar and jsf-api.jar from JSF 1.2 RI.
Then I try to create two new JSP Tag libraries based from .tld files.
When a .tld file is placed in "TLD File:" field there is no information below about Library Version and Required JSP Version. If I check "Execute Tags in JSP Visual Editor" and click "Customize" button - list of tags in "Customize Tag Library" window is empty.
I have errors when I try to use JSF Tags from this new library in JSP page like :
"Can't create tag instance: f:view (class: null). Make sure, that the tag class or a library contained this class is available in this application"
(free translation to English)
Is this possible to add JSF RI v1.2 as another library in Jdeveloper 10.1.3.1 ?
thanks for help
koli

Hi,
This solution is not exactly for Jdeveloper 10.1.3.x I think.
- "Create a JSF system library." section, point 2. - there is not possible to add library in folder other than User I see, so I added it in User folder.
- "Register the JSF JSP tag libraries." section, point 5. - in JD 10.1.3 there is no dialog box, I checked checkbox "Show Tag Library in Palette". A new library was added to User folder but there is no new libraries in component Palette.
Even as I use "Edit tag libraries .." from Component Palette context menu and add manually new tag libraries to selected, there is no libraries in Component Palette after it.
I feel so problem is with different .tld files format, not with adding libraries method.
Sun RI tld file (from version 1.2_03) fragment:
<taglib xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-jsptaglibrary_2_1.xsd"
version="2.1">

<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
<tlib-version>1.2</tlib-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
tld included in JD:
<!DOCTYPE taglib
PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN"
"http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>

<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
Did JDeveloper 10.1.3.x maintain with taglib version 1.2 ?
Regards
koli

Problem restoring/adding files

Similar Messages

Maybe you are looking for