Problem restoring source system connection post BW system copy

Hi.
I am having problems restoring the R/3 connection in our BW system.
This is the scenario.
We need to move our BW production system onto a new system, but keep both BW connected to R/3 production for testing etc until cutover to our new BW system.
Basis performed a system copy and restore of BW production to the new system and ran BDLS.
When I try to restore the R/3 connection via RSA1 I am getting the following error at the end-
"A connection already exists there ......." and the message refers to our current/live BW system. The options are to delete the existing or not delete. I have only chosen "do not delete" and therefore the connection is not restored. My concern is that if I choose "delete" this will damage my existing connection between R/3 and the currently live BW system which is we cannot afford to do.
In our newly copied BW system we are using the existing R/3 SM59 (from system copy), and in R/3 we have created a new SM59 for our new BW system.
It seems from the error message information that is complains that BW sent R/3 some sort of ID (value = "WS") and that is already taken by the existing BW system. I tried to find where and what this WS value is referring to and the only thing I have found is that in table RSBASISIDOC "WS" is the suffix for transfer structure for that R/3 system. ??? Not sure if this is related for what.
Thanks for any help

Hi ,
Please check with basis or if you can ,then try to restore the source system in BI/BW.This should correct the  inconsistencies between the two systems which is being caused by different Idoc types
Also check the table RSBASIDOC in the BI system and compare this to R/3 system ,the "basic type" field should be same.
A restore should work,it has always worked for me.
Regards
Amit

Similar Messages

  • Can a R3 system connect two XI  system?

    Hi,gurus:
    Can a R3 system connect two XI  system?In SM59 we have to point the rfc to a single xi.Is it right?

    If my scenario is about idoc,we can define two RFC in SM59,
    and two partners in WE21 and two ports in WE20,right?
    Correct..
    If my scenario is about abap proxy,then we can define two RFC in SM59,
    and two parameters in sxmb_adm in the R3 side,right?Then in the tcode:SPROXY,
    we can see both interfaces in two XI systems,right?
    this is not posssible...

  • How to verify the  Source systems connectivity with BWQ System.

    Hi All,
    I have diff source systems. And my requirement is to check the source systems connectivity with BWQ (BW Quality sys). please any body tell me the steps how to check the source system connectivity ?
    Thanks & Regards,
    Manju

    Hi Manjula,
    If you encounter problems when establishing a connection to your target server, check the following:
    A message box appears while performing one of the following actions:
          Setting connection by choosing Apply to local session.
          Testing connection settings by choosing Test settings.
          Creating SAP TSQL objects
    If errors occurred, they are displayed in the respective message box.
       Check developer trace files in ST11.
      Test connection:
         For RFC related errors, check the RFC connection via SM59
         For database multi-connect errors, check if you can connect to the target SQL Server with the SQL Server Query Analyzer. Also check if the DBCON entries are correct.
    Regards,
    RK

  • Source system issues post BW System Copy

    Hi Team,
    Post BW System Copy, we have observed that the RFC connection has changed.
    However the Target Host port is maintained same as the required source system...
    While checking the Connection, we are getting the following error messages:
    @5C@     Port description contains errors: Incorrect destination MR0CLNT200     RSAR     669     
    @5C@     BI unknown in source system     RSAR     8     
    @5C@     BI IDoc type ZSMA002 is not the same as source system IDoc type     RSAR     371     
    @5C@     The following errors occurred in the source system:     RSAR     374     
    @5C@     EDI: Partner profile not available     E0     332     
    @5C@     Entry in inbound table not found     E0     414     
    @5C@     Entry in outbound table not found     E0     400     
    @5C@     Entry in outbound table not found     E0     400     
    @5D@     Destination MP0CLNT200 has incorrect Unicode setting; adjust it to destination     RSAR     673     
    Please advice.
    Thanks & Regards
    Sneha
    Edited by: Sneha Santhanakrishnan on Mar 23, 2011 2:12 PM
    Edited by: Sneha Santhanakrishnan on Mar 23, 2011 3:04 PM

    Hi Arun,
    Thanks..
    Your solution worked for all the datasources except one wherin I am getting a error message while activating the Transformation as "System setting does not allow changes to be made to the object XXXXXXX"
    Please note the Transformation is in the ACTIVE but NOT EXECUTABLE state.
    Find below the details description on the issue.
    Message no. TO128
    Diagnosis
    The system and namespace change option set for this SAP System does not allow any changes to be made to object RSFO 4L8RD1B5MKEQI3WSPE5S8MR2O.
    System Response
    Editing is terminated, the object can only be displayed.
    Procedure
    If you want to edit the object RSFO 4L8RD1B5MKEQI3WSPE5S8MR2O in this SAP System, have your system administator set the SAP System to "modifiable" for this object.
    This can affect the modifiability of the namespace &1 or the namespaces that correspond to the pattern &1, as well as the global setting of the system change option.
    The system change option is set using the Transport Organizer tools (Transaction SE03). Expand the Administration node and execute the program Set system change option. The options are described there.

  • How to check R3 system connected to BI system

    Hi to all,
    I am installing BI contents , But before installing the Contents , in need to check which source system (R3)  is connected to BI.
    Please can any body tell me .
    How to check it.
    Regards
    Pavneet Rana

    Hi Rana,
    In RSA1 screen select source system option in the modelling area.
    Right click on the source system(for ex: D10client100) --> select "Check" from the context menu.
    It will display message if there is any thing wrong.
    second method
    If you have authorizations you can goto SM59 Tcode: drill down the ABAP connections ->check for your source system
    double click on it
    it will take you to "RFC destination screen" here you need to click on connection test.
    IT will display the test results.
    Regards
    KP
    Edited by: prashanthk on Aug 10, 2010 6:05 AM

  • Problems with WiFi network connectivity post 2.1 upgrade

    Have been having problems with WiFi connectivity since installing the 2.1 upgrade. When attempting to view some websites I get a "Safari cannot open the page because it is not connected to the internet" message. The same addresses can be resolved from my iMac at the the same time. Other websites don't have problems. Funnily enough www.apple.com is one of the effected sites.
    I can also only sporadically gain access to the App store & the iTunes store from the device. I mostly get a message stating - "Cannot connect to iTunes store".
    I am connecting through a WPA encrypted access point. I have tried restoring the device, resetting network settings, etc.
    Has anyone else experienced this? After work tonight I will temporarily set my access point to WEP, just to see if the problem may be related to WPA. I have read that the iPod touch is effected by this.
    Thanks,
    Matt

    No problem. The iPhone uses lower power on the WiFi transceiver to save the battery. It won't have the 50 meter range that one might see for other devices. As long as it works reliably when it is closer to the access point it is working normally.

  • RSA1 - Source system connection : Change in logical system name

    Dear friends,
    Can you please tell me how can i change the logical system name for a source system connection.
    There is no change in source system & source system connection check works well, just we have decided that from current logical system name SID_100 should be changed to SIDCLNT100.
    Can i do this by running BDLS in BW for RSBASIDOC table from SID_100 to SIDCLNT100 ?
    thanks
    ashish

    HI Sunny,
    This is not the same problem, may be similar though..i am not getting a way.
    let me describe u in a bit more details.
    Currently, we have a working source system connection to a system SID_CLT.  there is no change in source system.
    now, can i change this system connection technical name from SID_CLT to SIDCLNT*** .. 
    thanks
    ashish

  • SAP SNC 7.01 System connections documentations

    Hello There,
    Can someone share or point me to the location where I can find a document on SNC System connection with others systems...ERP, PI/XI and APO?
    Thanks,
    Kumar

    Hi Kumar,
    Please check following URLs.
    http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/57/6634418b718739e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/46/c2f65196b9453bbc60c975888ce1b5/frameset.htm
    http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/46/c2f65196b9453bbc60c975888ce1b5/frameset.htm
    Regards
    Datta

  • One Portal System connecting to Two CRM Systems

    Hi All,
    We have One Portal System EP 6.0 and we are trying to connect CRM 4.0 DEV and CRM quality.
    i mean one portal system connecting tow CRM systems.
    How the ivew connects two different CRM system.(dev and quality).
    One way I am thinking that we have to maintain tow system alias ie SAP_CRM, SAP_CRM_QTY
    and for the CRM quality, i have to change system alias all the iveiws.( becoz by default the system alias is SAP_CRM
    1. Is there any other solution for this?
    2. How to maintain the crm content for two different CRM systems.
    Thanks
    Ravi

    Hi Ravi,
    See if the following thread gives any help:
    <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=110980">https://www.sdn.sap.com/irj/sdn/thread?threadID=110980</a>
    Bye
    Ankur
    Do reward points for helpful answers!!

  • System Connection Wizard

    Hi Experts
    In SOAMANAGER -> Service Administration -> User Account Management
    I can se one acount ACCOUNT_IDECLNT800, which I want to delete. I deactivate it and then try to delete it, a message is displayed: "Account ACCOUNT_IDECLNT800 couldn't be deleted, because at least one assignment still exists to it!"
    I have deleted almost everything from SOAMANAGER (including SAPLOGONPROFILE, BUSINESS SCENARIO, SYSTEM CONNECTION PS_IDE_800) - but still this message is displayed, hence I am not able to run installation wizard through.
    When I try to create a System Connection manually, the system tells me that PS_IDE_800 already exists - but it's not showing in the table.
    Where I am missing something?
    Regards
    Tariq Maqsood

    Hello,
    Anybody able to delete the Account Name. I am having the same issue.
    "Account ACCOUNT_S13CLNT800 couldn't be deleted, because at least one assignment still exists to it"
    Kindly suggest if you are able to do it.
    Below tables are also blank:
    u2022     srt_syst_appl
    u2022     SRT_SYSTEM_DIR
    u2022     SRT_DEST_DIR
    Regards,
    Gagan

  • Problem restoring iTunes backup from Time Capsule

    I had to reformat the hard disk on my daughters macbook and I'm having problems restoring the iTunes library. I have copied the iTunes folder onto the Macintosh Hard drive and receive this error message when I try to open iTunes saying that the .xml file is missing. Would appreciate some help.

    can somebody help i/m basically having the same problem but my error message says an unknown error occurred

  • Restoring the source system connection in BW

    Hi all,
    I’ve been trying to upload data for 2 of my infocubes, and the extractions are bouncing. The message in R/3 is told me to check the connection. The RFC are fine.  But when I tried to restore the source system connection (RSA1 in BW), it sent me the following error messages:
    1.-  Basic type ZS 118 does not exist.
    2.-  The following error in the source system:
    3.-  Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
    The description in each error is:
    Error #1:
    Diagnosis                                  
        IDoc type ZS 118 could not be found.   
    System response                            
    Procedure                                  
       Please enter an IDoc type that exists. 
    Error #3:
    Diagnosis                                                                  
        Incorrect IDoc type ZSAB023 in the ALE definition of the source system.                                                                               
    System response                                                            
        Error when sending data to BW.                                                                               
    Procedure                                                                  
        Enter IDoc type ZS 118 .                                               
    They told me this IDocs are created automatically by the connection. Is that true?
    How can I fix this, so that I can restore my connection and do the data extraction?
    Thanks a lot
    Regards,
    Vic

    Hi Victor Tostado
    1.- Basic type ZS 118 does not exist.
    Type Transaction WE30. Check iDoc types Obj. Name :  RSSEND -> press F7
    a.) Enter 'RSSEND' in the Obj. Name field.  You will see an entry similar to the one below:
              RSSEND                          Data transfer from the source system (template)
                    [-]  E1RSSH               Data transfer IDoc: Header information
                             [+]  E1RSHIE    Data transfer Idoc: Hierarchy header information
                                    E1RSTXT   Data transfer IDoc: Texts
         b.) Enter RSREQUST in the Obj. Name field.  You will see an entry similar to the one below:
                RSREQUST                    Data request to the source system
                     [-]  E1RSRH               Data request IDoc: Header segment
                             [+]  E1RSRHI     Data request IDoc: Hierarchy
                             [+]  E1RSRTX    Data request IDoc: Texts
                             [+]  E1RSRMD   Data request IDoc: Master data
                             [+]  E1RSRIS      Data request IDoc: InfoSource
         c.) Enter RSINFO in the Obj. Name field.  You will see an entry similar to the one below:
                RSINFO                         Info IDoc
                    [-]  E1RSHIN             InfoIDoc: Status segment
                            E1RSPIN            InfoIDoc: Data packet segment
                            E1RSEIN            InfoIDoc: Error segment
    d.) If any of the above do not exist, contact your BASIS Team.
    2.- The following error in the source system:
    Type Transaction SM59. Maintain RFC destinations
    a.)     Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding your source system d.) Logon Information should contain source system client and name & password for you remote logon.
    3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system
    Type Transaction WE21. iDoc Processing Ports.
    receivers port is not available go to WE21 -> create port
    a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 versiond. RFC Destination should be one created in SM59. If non-existent then create one.
    I) Type Transaction SE16. Data browser (for R/3 -> BW Connections)
    Enter RSBASIDOC Print out copy of all entries in table.
    II) Type Transaction SM30. Msg Types & Assignment to iDocs
    Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOC table for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missing entries.
    Regards
    Sangram Sutar

  • Source System Connection Problem - RSAR 371

    We are attempting to create source system connections in our newly created NW2004s Dev system (sapdvbd1/BD1). We also have an existing NW2004s Dev system (sapsvbd1/BD1) which already contains the same source system connections.  The old Dev system was on a virtual machine but due to performance issues we have built another Dev system on a real server.  Is there any way to create these source system connections on both servers until everything has been moved from the old to the new?  The same source systems need to exist on both.  Thanks.

    Hi ,
    Please check with basis or if you can ,then try to restore the source system in BI/BW.This should correct the  inconsistencies between the two systems which is being caused by different Idoc types
    Also check the table RSBASIDOC in the BI system and compare this to R/3 system ,the "basic type" field should be same.
    A restore should work,it has always worked for me.
    Regards
    Amit

  • Source system connection problem in BI

    Hi ,
    While checking source system connection we are getting below error
    " BI IDoc type ZSBP055 is not the same as source system IDoc type ZSBP120"
    could please guide on this .
    Regards
    vamsi

    Hi ,
    Please check with basis or if you can ,then try to restore the source system in BI/BW.This should correct the  inconsistencies between the two systems which is being caused by different Idoc types
    Also check the table RSBASIDOC in the BI system and compare this to R/3 system ,the "basic type" field should be same.
    A restore should work,it has always worked for me.
    Regards
    Amit

  • Source system restore - Source system does not exist

    Hello friends,
    We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
    We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
    Now, when i check RSA1 source system Check for QA1, i get this error :
    Port 'A000000103 ' of type 'ALE ' does not exist
    No destination exists to source system QA1
    I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
    Please suggest.
    I do not have to lose transfer rules/PSA tables..etc.
    thanks
    ashish

    I get this when i try to restor connection :
    Source system does not exist
    Message no. RSAR175
    Diagnosis
    You have specified that you want to restore source system QA2. This source system is not known in BI.
    System Response
    The source system is not restored.
    Procedure
    Recreate the source system.
    If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

Maybe you are looking for