Problem running adobe form
ADS: Request start time: Mon Sep 08 23:19:24 PDT 2008(200101)
I am getting this error while running adobe , i m nt able to understand it plz help me ..!
Hi Ankesh,
Go to Visual Admin and restart the ADS related services, this issue will be resolved.
Go to Visual Admin -> Services -> Deploy -> Select the application Radio Button at the center bottom of screen -> Navigate to the sap.com/tcwdpdfobject and Stop the application and Start it afterwards.
Under services now select the PDF Manipulation Module - Low enc and stop the service and after its completely stopped, restart the service using Right Click Menu.
Regards,
Arafat
Similar Messages
-
PDF Attachment problem in Adobe form and send mail is not working
Dear Experts,
Recently i'm facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that i'm sending my code which i was declared in my program.Can anybody please help me to overcome this problem?
Warm Regards,
sameek.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
data: t_att_content_hex type SOLIX_TAB.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value 'Already provided an e-mail address here'.
DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
Message body and subject*
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Customer Information Form').
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Customer Information Form'
I_ATTACHMENT_SIZE =*
I_ATTACHMENT_LANGUAGE = SPACE*
I_ATT_CONTENT_TEXT =*
I_ATTACHMENT_HEADER =*
i_att_content_hex = t_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment*
Pass the document to send request*
lo_send_request->set_document( lo_document ).
Create sender*
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).*
Set sender*
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient*
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).*
Set recipient*
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(*
EXPORTING*
i_recipient = lo_recipient*
i_express = 'X' ).*
Send email*
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The Customer Information form has been emailed to the Employee' type 'I'.I am also facing issue with email send .
apex 4.1.1 oracle 11g
create or replace procedure email ( p_email in varchar2)
is
l_workspace_id number;
l_subject varchar2(2000);
l_body clob;
l_body_html clob;
l_email varchar2(40);
begin
l_workspace_id := apex_util.find_security_group_id (p_workspace => 'xyz');
apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
l_email:= p_email;
l_body := ' ';
l_subject := 'You have new tasks';
--if l_email=:P3_CONFIRM_EMAIL_ADDRESS is not null then
-- email( l_email =>:P3_CONFIRM_EMAIL );
-- end if;
l_body_html := '<p />The following tasks have been added.';
apex_mail.send (
p_to => l_email ,
p_from => '[email protected]',
p_body => l_body,
p_body_html => l_body_html,
p_subj => l_subject );
APEX_MAIL.PUSH_QUEUE;
end; I also check the log and queue but both are empty,
select * from
apex_mail_queue
select * from
apex_mail_log Kindly suggest what to do ?
I also created a process in apex , which call this procedure and pass the email address entered by user. -
Hi,
I have some problem in adobe form.................................
I have to design my adobe form in ADOBE DESIGNER layout.
and in the another end i have make my application programe in which i picke
some data from the sap tables. now my problem is that how can i send the data in
my adobe form from my programe i want to print that data on the form.
and always my programe is going to be notresponding.CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'Adobe form name'
IMPORTING
e_funcname = lv_funcname.
IF sy-subrc = 0.
u will get the fm name here.....
use fb_job_open
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = gs_output
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION lv_funcname
EXPORTING
/1bcdwb/docparams = gs_outputpara
wa_data = <> pass value here....as per u r requirement.(interface)
PATH = <>
IMPORTING
/1bcdwb/formoutput = ls_return
EXCEPTIONS
OTHERS = 1.
FP_JOB_CLOSE
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
e_result = result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
regards
Anbu B -
Getting message: There is a problem running adobe Acrobat Reader. If it's running, please exit and try again. 6:6
Hi garryw,
What version of Reader are you using, and are you on Mac OS or Windows? Do you get the same error when you try to print other PDF files, or is the problem specific to one PDF?
For starters, please try the solutions listed in this thread: Re: There is a problem with Adobe Acrobat /Reader. If it is running ,please exit and try again.(0:104)
Let us know how it goes.
Best,
Sara -
Communication problem between Adobe Form and WebDynpro
Hi all,
I have the following problem and am thankful for any help I can get from you in order to solve it:
I created an Adobe Form in WebDynpro. In both the WebDynpro as well as in the Adobe Form, I created a Submit Button (which I binded to the same method) as well as a text field (which I binded to the same context attribute). When I do changes in WebDynpro, everything works fine and the changes are displayed in the Adobe Form as well.
But when I do changes in the Adobe Form, these changes are not submitted. Also the Submit button in the Adobe Form is not working.
I send the project to a colleague and she could deploy and run my project without any problems. So I think it is a problem with my settings or installation. I already did a reinstallation of the NW Developer Studio as well as the Adobe Lifecycle Designer. But it did not help.
Did anyone have a similar problem or has a suggestions what else I could do?
Thanks in advance,
ThorstenHi Thorsten,
If the submit button doesn't do anything, it usually means there's something wrong with your client software.
Are you using NW04s or NW04? NW04 only supports ACF (Active Component Framework) forms, whereas NW04s also supports ZCI (Zero Client Installation) forms (there're different Submit buttons in Adobe LiveCycle Designer). Reader 7.0.9 should definitely work in all cases, but Reader 8.0 (and Reader 8.1, released yesterday) doesn't work properly with ACF forms (there's an SAP note on this subject).
To use ZCI forms, all you need is Adobe Reader at client side. To use ACF forms, you also need some other client software: either (the correct version!) SAP Active Component Framework (stand alone software that you can download from SAP Marketplace; it's part of some SAP note; search for xACF and select the correct version of the note). A better option is not to install xACF manually (uninstall it if present, using Control Panel > Add/Remove programs), but to use the ActiveX control instead (reinstall it in your case because of the problem you have). First kill the AcroRd32.exe process, if it is running. Then go to "C:\WINDOWS\Downloaded Program Files" and delete the file AdobeControl(s) (NW04) or AcfControls (something similar; NW04s) if present. Then access your form in your Web Dynpro application using IE (Firefox doesn't support ActiveX; the only option is to use ZCI forms with non-IE browsers). If all goes well, prior to displaying the form, IE should ask to install an ActiveX control (it will only be asked if you have sufficient privileges, that is belong to the local Administrators group).
Kind regards,
Sigiswald -
Problem in Adobe Form Execution
Hi,
I am getting an error "ADS: SOAP Runtime Exception: CSoapExceptioFault: SOAP(100102)" while executing Adobe Form.
It seems the ADS configuratoin is not correct. Can some help me out in fixing this issue.Hi Sathish,
To check the Present configuration do the following:
1.1 Checking by Executing Test Report FP_TEST_00
Use
This test report checks if your system is configured correctly for processing forms in an ABAP environment.
Procedure
1. Log on to your SAP Net Weaver AS ABAP.
2. Call transaction SA38 and enter the name FP_TEST_00.
3. Choose Execute (F8). A dialog box is displayed.
4. Enter FP_TEST_00 in the field Form.
This is displayed as the default form name.
5. Enter the name of the connection to the ADS. Enter the default name ADS, or, if you have specified another name, the one you are using in your system.
6. In the dialog box, choose Output in Print Preview.
7. Enter an appropriate device type in the field Output Device.
8. Choose Print Preview.
On successful execution of the report, you find the Print Preview of the PDF form.
If the Configuration is not correcr no form is displayed.
The following steps are only necessary, if the result of the above test was not successful.
2. Check the ABAP Connection
3. Check the User and Password
4. Check the Destination Service
1.2 Checking the ABAP Connection
Use
This is a test for checking the RFC destination. This test applies to both connections using Basic Authentication and SSL connections.
Procedure
1. Log on to your SAP system.
2. Call transaction SE38.
3. Enter the name of the test report FP_PDF_TEST_OO.
4. Enter the name of the connection. Enter the default name ADS, or, if you have specified another name, the one you are using in your system.
5. Choose Execute (F8).
Result
If the configuration is correct, the system displays the version number of the Adobe document services.
If the configuration is not correct, the system displays a corresponding message.
or
Go to the following link to download the complete ADS configuration guide:
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e4e9afb-0701-0010-f8a8-b8cd093662c2]
Hope to solve your problem.
Regards,
Vaibhav Tiwari. -
Problem with adobe forms multiple pages
Hi
can someone help me how to get multiple pages in adobe forms in case the item lines exceeds the page capacity?
ThanksIt should not be much of a problem. Here is a detailed solution to your problem:
In your context , create a node MasterNode of cardinality 1...1 and singleton set to true. Bind this to the dataSource property of the InteractiveFormElement.
Inside this MasterNode create a node Data of cardinality 0...n and singleton set to false. Keep all of your payslip attributes inside this node.
In your interactive form element , in the Body Page create a subform of Type Flow Content and Flow Direction Table .Check the chechbox for Allow Page Breaks within Context . Inside this subform create another subform of Type Flow Content and Flow Direction Western Text . Uncheck the checkbox for Allow Page Breaks within Context . Put all of your pay slip UI elements inside this subform and bind them with the attributes under the node Data. Also tick the property of the inner subform under the section Object->Subform that says Repeat Subform for each Data Item
In your view controller coding area , create an element of the node Data for each employee record and populate it with values for the particular employee .
Add all of the elements that you created into an ArrayList and bind this ArrayList to the node Data. Now your form is ready for n number of employees.
Put this sort of coding in your view controller coding:
IDataElement objData = null;
ArrayList arlData = null;
int intNumberOfEmployees=0;
try
arlData = new ArrayList();
intNumberOfEmployees = //Get size of your model node that returns employee info
if(intNumberOfEmployees>0)
for(int i=0;i<intNumberOfEmployees;i++)
objData = wdContext.createDataElement();
objData.setName("//Value fetched from backend here");//Eg:wdContext.nodeEmployeeInfo.getEmployeeInfoElementAt(i).getname()
//Similarly set all of the values
arlData.add(objData);
wdContext.nodeData.bind(arlData);
Hope this helps you... -
Hi experts
I am trying the tutorial on SDN - 'How to Execute an RFC Model with Input from Interactive Forms'. When I click on submit on the adobe form and the action handler executes,
wdThis.wdFirePlugOutToFlightDetail();
the browser closes without any error message.
How can I know what is the cause or where am I going wrong.
Regards
Abdullah
Message was edited by:
Abdullah Ismailthe problem was in ACF
-
Hi all,
I am creating an adobe form. When i click on "layout" tab, it's giving me a message like..
Could not start Layout Designer (see long text)
How to resolve the problem?
Thanks
NiteshYou need to install Adobe LiveCycle Designer. Please check with your BASIS team.
For more info check this article,
http://www.adobe.com/manufacturing/pdfs/bwp_interactive_forms_adobe.pdf
Regards -
Printing Problem in Adobe Forms
Hi,
We have created Adobe Form and it is working fine but the problem is with printout. when we issued output and click on
print, the output comes with larger font size. Is there any settings in output parameters for printing same as print preview?
I will be very greatful if any one update on this.
Thanks & Regards,
Venkateswararao GHi,
Please refer to SAP Note 1503523.
Regards, -
Error when running Adobe form?
Hi all,
When i ran my Adobe Form appl, I got this error. What to be configured?Plz help me
<b>Error:</b>
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation. Request start time: Tue Nov 29 10:09:22 GMT+05:30 2005 com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_17499208\DM-7879321343435588089.dir\DM6867856807703759116.tmp Specific error information: $$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0 GeneralError: Operation failed. SecurityHandler.login:-1: Could not open Digital ID file with the password provided. Please try again. General error information: IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0 Exception Stack Trace: com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_17499208\DM-7879321343435588089.dir\DM6867856807703759116.tmp Specific error information: $$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0 GeneralError: Operation failed. SecurityHandler.login:-1: Could not open Digital ID file with the password provided.Hi,
Debasish is right. You have to install and configure credentials before you can use Adobe Interactive Forms. Check SAP Library section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/6e/8e22fad84440629b4385748e22b8a0/frameset.htm">Installing and Configuring Credentials</a> for detailed information.
Best regards,
Martin -
Hi experts
I am trying the tutorial on SDN - 'How to Execute an RFC Model with Input from Interactive Forms'. When I click on submit on the adobe form and the plug is fired using,
wdThis.wdFirePlugOutToFlightDetail();
the browser closes without any error message.
How can I know what is the cause or where am I going wrong.
Regards
AbdullahHi,
Where did u call the Interativeform in the firstview or second view.
Generallay what happend here is After executing the function module you are calling the second view that displays second view with pdf.
check with your second view plug-ins once again?
Otherwise call your pdf into your first view and try?
Before this u said worked and PDF was displayed.
try in initial View then try to go second view.
thanks,
Lohi. -
Blank Space problem in Adobe Form
Hello Gurus,
In my Adobe form, One field has to be displayed based on a condition. So, for that field, in Context tab, condition is specified and its working also i.e. It condition is true then data is not displayed in the layout but I find the blank space for it. I dont want that blank space to be displayed.
Example:
In layout, address is in format as shown below.
Name
Street
City
Region
Postal code
Country
Here, I have a condition that, Region field should not be displayed only for Material eq '123' i.e. same address has to be printed as shown below.
Name
Street
City
Postal code
Country
But, If I give condition then address is shown as below.
Name
Street
City
>Here, am getting empty space & I dont need this blank space to there in the layout.
Postal code
Country
So, Can anyone please help me for this.
Thanks in Advance.
Regards,
UshaHi Usha,
1. Remove the Condition from you Context tab.
2. In the Driver Program check for the condition and fill the value in the internal table which is passed to
the adobe form.
3. Make the subform (under which the field is added in the hierarchy view) as flowed.
4. In the script editor, Select the 'javascript' and write the script to hide the form field specifying the condition here.
for e.g
if (xfa.form.FORM.SUB_FORM.matnr == "123") {
xfa.form.FORM.SUB_FORM.Region = "hidden";
NOTE: Javascript is Case sensitive and stops working immediately after the line of code where an error occurs.
Hope this proves to be useful.
Thanks,
Swar. -
Components/Software Installation Problem for Adobe Form
Hi all,
I am new to developing Adobe forms. I only experience in smartforms on SAP R/3 environment.
To start doing Adobe form, I have installed Adobe LiveCycle Designer ES (Is it correct?), .net Framework 2.0, SAP GUI 7.1. I already have Adobe Reader 7.0 on my desktop.
However, when i created a form in Tcode SFP, I couldn't open the layout, prompted me error and forced to exit.
Then I configured Adobe Document Services for Adobe Reader 7.0 but in vain. Actually i am not sure how to get Adobe document services and not sure whether really need it.
Can anyone help?
Thanks in advance!Hi,
All SAPWIN-type device types cannot be supported with the Adobe technology alone. See also the new development PPDFPRINT 7.20 in Note 1444342.
You can print PDF-based forms on all printers installed in the SAP system as long as the relevant XDC file (printer definition in XML format) exists. SAP delivers XDC files for the following SAP standard device types:
- POST2 - PostScript
- HPLJ4 - PCL black and white
- HP9500 - PCL color
- PDF1 - PDF
- AZPL203 - ZPL (Zebra label printing)
- AZPL300 - ZPL (Zebra label printing)
You can modify XDC files yourself within a limited scope. Documentation about this is available on SAP Service Marketplace at
http://sdn.sap.com/irj/sdn/adobe-> SAP Interactive Forms - Configuration Guides
These XDC files must be saved at runtime on the host that also contains the Adobe Document Services. The exact path
usrsap<SID>SYSglobalAdobeDocumentServiceslib.
In addition to the XDC file, an entry must also exist in the TSP0B table on the SAP system. This entry assigns an SAP device type to an XDC file. Only if the assignment entry exists, you can print PDF-based forms on the printers with the relevant device type. You can maintain the TSP0B table with the RSPO0022 report. Refer to the online documentation for information
about how to use the report.Important: You cannot change the XDC files delivered by SAP or the TSP0B entries. If a change is required nevertheless, you should first create a copy of the relevant device type with another name in transaction SPAD.
Then create a copy of the XDC file with a different name and make the relevant changes. The new XDC file must be copied to the directory mentioned above on the server that contains the Adobe Document Services.
Regards
Bhuban
RKFL -
Dynamicaly Photo Print Problem in Adobe Form
Hello Expert,
I want to display Employee Photo on Performance Apprisal form Dynamicaly on Adobe Form(SFP).
for which, i trieed two method -
1)-
DATA : lv_pernr1 TYPE tdobname.
CONSTANTS: c_graphics TYPE tdobjectgr VALUE 'GRAPHICS',
c_bmap TYPE tdidgr VALUE 'BMAP' ,
c_bcol TYPE tdbtype VALUE 'BCOL'.
DATA : ls_z_if_test_cv TYPE xstring.
lv_pernr1 = '11000003'. " Employee Number
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = c_graphics
p_name = lv_pernr1
p_id = c_bmap
p_btype = c_bcol
RECEIVING
p_bmp = ls_z_if_test_cv
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
break jp_deepaks.
IF sy-subrc = 0.
lv_filename = ls_z_if_test_cv.
ENDIF.
2)-
Find Photo URL of Employee
DATA : uri TYPE toauri-uri.
DATA: lv_filename1 TYPE toauri-uri.
CALL FUNCTION 'HRWPC_RFC_EP_READ_PHOTO_URI'
EXPORTING
pernr = '11000003'
datum = sy-datum
tclas = 'A'
IMPORTING
uri = uri
EXCEPTIONS
not_supported = 1
nothing_found = 2
no_authorization = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
lv_filename1 = uri.
CALL FUNCTION 'HR_KR_STRING_TO_XSTRING'
EXPORTING
codepage_to = '8500'
unicode_string = lv_filename1
IMPORTING
xstring_stream = ls_z_if_test_cv
EXCEPTIONS
invalid_codepage = 1
invalid_string = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
But both methods are not working properly. How can i do this??
Thanks in Advance,
Regards,
ShriHi,
I fetch the detail from table toahr with passing parameter
sap_object = 'PREL', reserve = 'JPG' and ar_object = 'HRICOLFOTO'.
i got the ARC_DOC_ID form table toahr. now how can i print this emp photo on Adobe form.
is this hexadecimal value or string ?
please explain the whole process for printing employee photograph on Adobe Form?
Thanks,
Shree
Maybe you are looking for
-
PreE V8: Clips not displaying in project view
I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?
-
Sales district field in Quotation/Sales order
Hi Gurus, on which screen i can see the "Sales district" field in Quotation/Sales order/Inquiry? Thank you ANil
-
Reconfiguring EBS after IP address change
Hi All, In our EBS(12.1.3) , only IP addresses have been changed as part of a migration. I believe I need to clean up FND_NODES and rerun autoconfig for IP change to be recorded in the table. I also need to do changes to listener and tnsnames if they
-
Why doesn't ipad2 pair with iphone 5 with Bluetooth ?
Cannot get my iphone 5 to pair with my Ipad 2 using Bluetooth why?
-
Article is not listed for site
Hello All, i am geting below error for INBOUND IDOC for PORDCR04