Problem running DNG Converter from command line in Windows XP

I'm a frustrated user trying to run Adobe DNG converter from the Windows command line - more specifically from a batch file.
- Am reasonably conversant with writing batch files
- Have read the PDF file provided by Adobe
I just can't figure the correct syntax for adding the command line parameters and, unfortunately, the Adobe PDF file doesn't have verbose examples for idiots like me. Nor can I find any such examples on the Net, or any discussion of this problem in the forums.
The Adobe PDF instructions state...
"The parameter list includes the conversion options you want to use, followed by the names of the files to convert."
As there is no switch to prefix 'the names of the files to convert' I assume I just leave a space and include the path to the source files at the end of the parameter list?
Here is the batch file line I am trying to use...
"C:\Program Files\Adobe\Adobe DNG Converter.exe [parameter list]"
Where I want to specify in the [parameter list] that...
(a) The destination directory (-d <directory> parameter) is c:\DNG_files
(b) And the source files are in directory c:\RAW_files
Here is the batch line with the parameters entered...
"C:\Program Files\Adobe\Adobe DNG Converter.exe -dC:\RAW_files c:\DNG_files"
I've tried variations of this with space between -d and C:\RAW_files and C:\DNG_files\*.* for the source files parameter.
I just keep getting DOS erros like "The filename, directory name or volume label syntax is incorrect"
Can anybody help me. I'm clueless how to solve the problem. :-(
I'm running DNG COnverter version 4.2
Thanks in anticipation.
Rob

Thanks for responding G Sch.
LOL. Well this lemming doesn't habitually rename .exe files (e.g. Adobe DNG Converter.exe) to a non-spaced alternative either! (Adobe_DNG_Converter.exe)
Still no luck...
*** Here is my batch file...
REM Copy and DNG-convert files from CF
CD c:\RAW_files
dir c:\RAW_files
"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
dir c:\DNG_files
pause
***Here's the DOS shell output...
<<BEGINS>>
C:\RAW_files>dir c:\RAW_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\RAW_files
12/03/2008 10:29 AM <DIR> .
12/03/2008 10:29 AM <DIR> ..
11/03/2008 07:00 AM 10,661,632 _3110455.ORF
11/03/2008 07:01 AM 10,661,632 _3110457.ORF
11/03/2008 07:01 AM 10,661,632 _3110458.ORF
11/03/2008 07:02 AM 10,661,632 _3110460.ORF
11/03/2008 07:02 AM 10,661,632 _3110461.ORF
11/03/2008 07:03 AM 10,661,632 _3110462.ORF
11/03/2008 07:03 AM 10,661,632 _3110463.ORF
11/03/2008 07:04 AM 10,661,632 _3110464.ORF
11/03/2008 07:04 AM 10,661,632 _3110465.ORF
9 File(s) 95,954,688 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
C:\RAW_files>dir c:\DNG_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\DNG_files
12/03/2008 02:46 PM <DIR> .
12/03/2008 02:46 PM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>pause
Press any key to continue . . .
<<ENDS>>
As you can see (a) Source files exist(b) DNG command line runs without generating an error (c) no output files in destination.
DNG Converter did not run.
If I remove everything after the command (i.e. the parameter list stuff) it fires up DNG Converter in interactive mode. Not what I'm after.
Any other thoughts on what the problem is?
Thank you.
Rob

Similar Messages

How to run Endeca Graphs from command Line

Hi,
I would like to know if there is any way to run Endeca Graphs from command line in Windows.
Thank you,

The correct way to execute a graph using the command line in windows is.......
Execute the following command from the project folder:
C:\Oracle\Endeca\Discovery\3.1.0\IntegratorETL\configuration\org.eclipse.osgi\bundles\5\1\.cp\lib\bin\clover.bat -plugins "/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/5/1/.cp/lib/plugins;/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/6/1/.cp/lib/plugins/;/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/9/1/.cp/lib/plugins/;/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/14/1/.cp/lib/plugins/;C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/21/1/.cp/lib/plugins/;/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/23/1/.cp/lib/plugins/;/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/plugins/com.endeca.latitude_1.0.0/lib/plugins/;/C:/Oracle/Endeca/Discovery/3.1.0/IntegratorETL/configuration/org.eclipse.osgi/bundles/358/1/.cp/lib/plugins/" -noJMX graph\graph_name.grf
Our costumer needed to run some ETL process from ODI and once it finished start a Clover ETL process (automatically). So we created a .bat file witth the above command and then in ODI we created a package with all ETL interfaces and the last step of the package was a OScommand component that excecuted the .bat script from the Endeca's project folder.
Hope you find this post helpfully.

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

How to run an executable from command-line

I'm learning how to use the Terminal and I got stuck in a silly thing (I suppose it is). How can I run an executable file from command-line in Terminal?
For example: I have a file named "Hello" in the folder /sample. If I use the ls command (ls sample), I can see the file Hello. Then I move to the directory (cd /sample) and try to run the file Hello (typing "Hello") but I got "command not found" message.
If I drag the Hello file from Finder to Terminal and hit Return, it runs perfectly. And if I type the full path to the file (even if I'm already inside its directory), it also runs.
So, my doubt is if there is any command to run an executable from command-line.
Thanks

KJK555 wrote:
Hi VK:
Can you enlighten me on why it's neccessary to do the "./" thingy in OS X when in unix/linux
I never had to resort to doing that?
Kj
I took the trouble of reading *man bash* and it explains the issue. to add the current directory to PATH you need to add an empty path to PATH like this
PATH=$PATH::
you can add it to ~/.bash_profile so that it's executed automatically when you start bash. I suspect the linux system you are talking about had this set up by default or had it added to PATH in /etc/profile which defines PATH globally.

Run test case from command line

Hi All,
Working environment : VS 2013 professional
Project type : Unit test project for (Windows 8.1 and Windows phone 8.1)
I have a set of unit test cases and want to run it on command line.I tried MSTest.ext and vstest.console.exe for running test case but not succeed.
command :  MSTest.exe /testcontainer:path of project dll
command :  vstest.console.exe path of project dll
Type of Error
Error : Unit test case for windows store and windows phone app can't be run outside appcontainer.
Error : No tests to execute
command :  MSTest.exe /testcontainer:path of appx
command :  vstest.console.exe path of appx
Error : root certificate error
I just want to run windows 8.1 and windows phone 8.1 run test cases from command line.
Thanks in advance.

Hi vicky2468,
Based on your issue, as far as I know that if we want to run unit test for windows store and windows phone app using mstest.exe or vstest.console.exe in command line, you will need to execute the .appx instead of the dll in command line.
In addition, I tried to run the appx for unit test in command line,
but I found that I also get the same issue as yours. I could not execute the appx for unit test in command line successfully. But if we run it with VS IDE in Test
Explorer windows, it seems that it works fine.
So I suggest you can submit a feedback for this issue, to get the issue confirmed and diagnose by product team, would you please create connect report for it? You will get email notification for update.
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx
When you submit the connect, I suggest you can provide your project for product team so that product team will
be better help you solve this issue.
If you submit it, please share me the link here, I will help you vote it. I think we could get the latest information
from the product team experts. Of course, if I get any latest useful information, I will update it here.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Running Oracle Scripts from Command Line

Hi,
How can i run Oracle scripts from command line.
Actually i need to run these scripts from MSBuild before running Unit test projects

C:\>sqlplus @myscript
That would be the easiest variation
C:\>sqlplus user/passwd@tns_alias @myscript
would be an often used variation
And then there is of course the version with parameter passing:
C:\>sqlplus user/passwd@tns_alias @myscript param1 ... paramx
Dunno about MSBuild

SQL Developer BRIDGE command from command line on Windows environment

Is it possible to call SQL Developer BRIDGE command from command line on Windows environment?

Hi <please supply your name>,
SQL Developer Worksheet is not available from the command line.
The BRIDGE command is only supported in the Worksheet.
Its an interesting idea though. Are you trying to script data move from a non Oracle database to an Oracle database using the BRIDGE command?
The BRIDGE command was initially done to allow a simple data move from a non Oracle database to Oracle. We then build the "Copy to Oracle" feature out of it.
http://dermotoneill.blogspot.com/2010/11/cross-database-bridge-statement.html
http://dermotoneill.blogspot.com/2010/11/copy-to-oracle.html
Since the BRIDGE command references connection names, which have to be defined in UI of SQL Developer any solution to run this on the command line would have to work this out.
There are number of ways you can do this without using the BRIDGE command.
1) Perform a capture/convert of your non Oracle database and then generate the "offline" data move scripts.
Theses scripts use SQL*Loader and your non Oracle database tool (Ex: Sybase BCP).
These are run from the command line and can be modified ....
2) Use a database link from your Oracle database to your non Oracle database and reference /query the data that way.
I would interested to hear your thoughts.
Regards,
Dermot
SQL Developer Team.

SCCM 2012 - Problems running vbscript or simple command line

Hey everybody, I'm having a heck of a time trying to get SCCM 2012 to deploy some very simple Vbscripts or even a simple command line. I need to deploy some registry fixes across the company as well as a Vbscript that uninstalls some old applications.
If I run these scripts/commands outside of SCCM everything works fine, inside of SCCM it always shows "succeeded" but it doesn't actually run correct on the client.
What's confusing to me is the use of distribution points when you're running a command line that doesn't actually have any source files. For instance this is what I'm trying to run "regedit /s \\servername\folder\registryfix.reg". I've also tried
a similar bat file as well with the same result. I've tried it with a source folder specified, I've tried it using Run Program From Server or Download locally. I've gone through everything I can think of but can't get it to work.
Similarly with a vbscript I'm trying "cscript.exe /s \\servername\folder\uninstallapps.wsf" and various different settings in the package deployment.
I'm really confused here guys so any help would be greatly appreciated. Thanks

What I have found is that if you try and run the REG.EXE command line directly, either as a program or via a CMD/BAT file, the 64-bit redirection will occur. So, if you had something like this in a program or via a CMD/BAT file that ran against a 64-bit
system:
REG ADD HKLM\Software\Microsoft\Test /v Test /d Test
You would end up with this registry entry existing under:
HKLM\Software\Wow6432Node\Microsoft\Test
That's because SCCM uses the 32-bit launcher to take care of this and redirection occurs - You can see this via the "CCM32BitLauncher.log" on the client.
To work around this problem, I have done the following:
On a reference machine, create/export the registry entry I want into a *.reg file - An example export of "Test.reg" for the above mentioned registry entry would look something like this:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Test]
"Test"="Test"
2. Stick our "Test.reg" file in a source share, create a package with the share as the source content, and distribute it
3. Create a program for the package with a command line like this:
REG IMPORT Test.reg
This is obviously not as clean as having a command line with a package to distribute, but I find it works fine for me and gets around the redirection for registry entries.

Running Unit Test from test manager that run bat file from command line

Hi ,
I am trying to run Jsystem (java framewotk) from command line using runScenario.bat thru unit test that i associated to test in test manager.
the idea is that when i ran the automated test from MTM - it will run the the unit test that will run the appropriate test case in java.
i wrote the code like this :
using System;
using Microsoft.VisualStudio.TestTools.UnitTesting;
namespace UnitTestProject3
[TestClass]
public class UnitTest1
[TestMethod]
public void TestMethod1()
try
String command = "c:\\JSYSTEM\\runner\\runScenario.bat
c:\\Users\\ryeshua\\Source\\Workspaces\\Auto1\\my-tests-project\\target\\classes scenarios\\feature1 RoeySetup.xml ";
System.Diagnostics.ProcessStartInfo procStartInfo =
new System.Diagnostics.ProcessStartInfo("cmd", "/c " + command);
procStartInfo.RedirectStandardOutput = true;
procStartInfo.UseShellExecute = false;
//procStartInfo.CreateNoWindow = true;
System.Diagnostics.Process proc = new System.Diagnostics.Process();
proc.StartInfo = procStartInfo;
proc.Start();
string result = proc.StandardOutput.ReadToEnd();
Console.WriteLine(result);
catch (Exception objException)
// Log the exception
and when i ran it from visual studio it worked perfect. and update the Jsystem logs of the junit test in the jsystem/runner/log folder.
but when i added it to associated test and ran it from MTM - it pass but it does not update the logs in jsystem folder.
the problem that i dont know what is not working. i cant see the output of it when i ran from mtm but can see when i ran from VS.
i am using VS 2013 Pro with MTM 2013.
please advice
Roey

Hi Roey,
Thank you for posting in MSDN forum.
Based on your issue, could you please tell me how you generate the log file under the jsystem folder?
Generally, I know that when we run unit test from VS IDE, the file will be saved into the local machine. But when we run unit test from MTM, the unit test method will be run on the test agent machine, so the file will be saved into the test agent machine.
Therefore, I suggest you could check if you did not see the updated logs file in jsystem folder on the test agent machine.
In addition, I suggest you could try to copy this unit test project on this test agent machine and then run the unit test method using mstest.exe in command line and then check if you can update the logs file.
https://msdn.microsoft.com/en-us/library/ms182489.aspx?f=255&MSPPError=-2147217396
If you have any updated message about this issue, please tell me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Running FlexUnit tests from command line

Sorry if that has been posted before: I searched best I could and nothing came up.
I am interested in building and running my unit tests from the command line so we can add it to a nightly build process.
I am *very* new to all this: basically I picked up Adobe Flash Builder 4 a month ago and I have done *everything* inside that IDE: writing code, building, testing, running.
I looked into at least how to build something from the command line, I found this:
http://help.adobe.com/en_US/flashbuilder/using/WSbde04e3d3e6474c4-59108b2e1215eb9d5e4-8000 .html
Can't get past this error:
Buildfile: /Users/dbanks/build_test.xml
BUILD FAILED
Target "FlexUnitApplication" does not exist in the project "null".
Total time: 0 seconds
Adobe Flash Builder 4:
An error has occurred. See the log file
/Users/dbanks/Documents/Adobe Flash Builder 4/.metadata/.log.
Plus, even if I got this going, I am just building the swf. I also want to run it and capture the output in some meaningful way that can be read/evaluated/acted on.
FWIW, the script/xml I am using to try to build:
build_test.xml:
<?xml version="1.0"?>
<project default="main">
    <target name="main">
        <fb.exportReleaseBuild project="NightclubMogul" />
    </target>
</project>
execute_build_test.sh:
WORKSPACE="$HOME/Documents/AdobeFlashBuilder4"
# works with either FlashBuilder.app or Eclipse.app
"/Applications/AdobeFlashBuilder4" \
    --launcher.suppressErrors   \
    -noSplash   \
    -application org.eclipse.ant.core.antRunner   \
    -data "$WORKSPACE"    \
    -file "/Users/dbanks/build_test.xml" FlexUnitApplication
I am not clear what in here is actually supposed to point to where my project lives: it's off in some directory somewhere. I see that I am pointing to a workspace (Documents/AdobeFlashBuilder4) but when I poke around in there I don't see anything connecting back to the directories where the code lives.
Any help would be great: getting the tests to build from command line, then getting them to run.

C:\>sqlplus @myscript
That would be the easiest variation
C:\>sqlplus user/passwd@tns_alias @myscript
would be an often used variation
And then there is of course the version with parameter passing:
C:\>sqlplus user/passwd@tns_alias @myscript param1 ... paramx
Dunno about MSBuild

Problem with tokenized input from command line

I am trying to take an input from the command line, parse it to tokens and perform whatever operation is needed depending on the name of the token, on a binary tree of stacks for example, if i type 1 2 1 3 printLevelOrder, then the root of the tree should have 3, 2,1 in the stack, the left child should have 1 and the right child should be empty. and then a level order print of the tree should be performed.
however what is happening when i run this code is the numbers are being put into the right stacks of the tree, but any commands such as printLevelOrder or PrintPopRoot are entering the code that is for placing numbers onto the stack instead of executing that command and skipping past this piece of code.
so my question is, why is the if statement if (word =="printLevelOrder") not being executed when thats whats in the word ?
example input and output shown below code fragment.
          try {
              BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
             String line = "";
             while (line != "***") {
                  System.out.print("> prompt ");
                  line = in.readLine();
                  StringTokenizer tokenizer = new StringTokenizer(line," ");
                  String word = new String();
                  while (tokenizer.hasMoreTokens()) {
                         word = tokenizer.nextToken();
                         boolean notCommand = true;
                         if (word =="printLevelOrder") {
                              theTree.printLevelOrder();
                              System.out.println("(word ==printLevelOrder)");
                              notCommand=false;
                         if (word == "printPopLevelOrder") {
                              theTree.printPopLevelOrder();
                              notCommand=false;
                         if (word == "printPopInorder") {
                              theTree.printPopInorder();
                              notCommand=false;
                         if (word == "printPopPreorder") {
                              theTree.printPopPreorder();
                              notCommand=false;
                         if (word == "printPopRoot") {
                              theTree.printPopRoot();
                              notCommand=false;
                         if (word == "***") {
                              notCommand=false;
                         if (notCommand == true) {
                              System.out.println("(notCommand == true)");
                              boolean notPlaced = true;
                              int v = 1;
                              while ((notPlaced==true) && (v < theTree.size())) {
                                   if (theTree.element(v).isEmpty()) {
                                        theTree.element(v).push(Integer.valueOf(word));
                                        System.out.println("Inserting"+word);
                                        System.out.println("in empty stack at location: "+v);
                                        notPlaced=false;
                                   if (notPlaced==true) {
                                        if ( Integer.valueOf(word) >= Integer.valueOf( theTree.element(v).top().toString() ) ) {
                                             theTree.element(v).push(Integer.valueOf(word));
                                             System.out.println("Inserting"+word);
                                             System.out.println("in stack at location: "+v);
                                             notPlaced=false;
                                   v++;
          }valid inputs: int value, printLevelOrder, printPopLevelOrder, printPopInorder, p
rintPopPreorder, printPopRoot, *** to quit
prompt 1 3 2 4 2 printLevelOrder(notCommand == true)
Inserting1
in empty stack at location: 1
(notCommand == true)
Inserting3
in stack at location: 1
(notCommand == true)
Inserting2
in empty stack at location: 2
(notCommand == true)
Inserting4
in stack at location: 1
(notCommand == true)
Inserting2
in stack at location: 2
(notCommand == true)
Exception in thread "main" java.lang.NumberFormatException: For input string: "printLevelOrder"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.valueOf(Integer.java:553)
at TreeStack.main(TreeStack.java:73)
Press any key to continue . . .

lol aww, shame that you forgot to do that. i had 10 / 10 for mine, and seing as the deadline is now well and trully over,
here is the entire source for anybody who was following the discussion or whatever and wanted to experiment.
additional files needed >
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/Stack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/ArrayStack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackEmptyException.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackFullException.java
/*TreeStack.java - reads command line input of values and assigns them to stacks in a binary tree and performs
operations on the ADT. valid inputs: <int>,   printLevelOrder,   printPopLevelOrder,
printPopInorder,   printPopPreOrder,   printPopRoot.         Terminates on invalid input.
Written by George St. Clair.
S/N:0208456         22/11/2005
import java.util.Vector;
import java.io.*;
import java.util.StringTokenizer;
public class TreeStack {
     private final int TREE_CAPACITY = 7 + 1;
     private final int STACK_CAPACITY = 10;
     Vector tree = new Vector(TREE_CAPACITY) ;
     //collect input from command line, add values to stacks at nodes of the teee
     //and perform required operations on the treestack
     public static void main (String [] args) {
          //create a tree of stacks
          TreeStack theTree = new TreeStack ();
          try {
               //collect standard input
              BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
             String line = "";
             while (line != null) {
                    System.out.print("");
                  line = in.readLine();
                  //tokenise input
                  StringTokenizer tokenizer = new StringTokenizer(line," ");
                  String word = new String();
                  while (tokenizer.hasMoreTokens()) {
                         //assign word to the token
                         word = tokenizer.nextToken();
                         boolean notCommand = true;
                         //perform operation on treestack depending on what word is
                         if (word.equals("printLevelOrder")) {
                              System.out.println("printLevelOrder");
                              theTree.printLevelOrder();
                              notCommand=false;
                         if (word.equals("printPopLevelOrder")) {
                              System.out.println("printPopLevelOrder");
                              theTree.printPopLevelOrder();
                              notCommand=false;
                         if (word.equals("printPopInorder")) {
                              System.out.println("printPopInorder");
                              theTree.printPopInorder();
                              notCommand=false;
                         if (word.equals("printPopPreorder")) {
                              System.out.println("printPopPreorder");
                              theTree.printPopPreorder();
                              notCommand=false;
                         if (word.equals("printPopRoot")) {
                              System.out.println("printPopRoot");
                              theTree.printPopRoot();
                              notCommand=false;
                         //if word was not a command it must be a number
                         if (notCommand == true) {
                              boolean notPlaced = true;
                              int v = 1;
                              //starting at the root, find suitable place for number
                              while ((notPlaced==true) && (v < theTree.size())) {
                                   //if the stack at v is empty, number goes here
                                   if (theTree.element(v).isEmpty()) {
                                        theTree.element(v).push(Integer.valueOf(word));
                                        System.out.println("inserting: "+word);
                                        System.out.println("in empty stack at location: "+(v-1));
                                        notPlaced=false;
                                   //if the stack is not empty
                                   if (notPlaced==true) {
                                        //if the value on the top of the stack is smaller than number, number goes onto the stack
                                        if ( Integer.valueOf(word) > Integer.valueOf( theTree.element(v).top().toString() ) ) {
                                             theTree.element(v).push(Integer.valueOf(word));
                                             System.out.println("inserting: "+word);
                                             System.out.println("in stack at location: "+(v-1));
                                             notPlaced=false;
                                   //if that node was no good, check the next one for suitability
                                   v++;
          catch (Exception e) {
               //occurs when user inputs something that is neither a command, or a number, or upon EOF, or stack is full
     public TreeStack () {
          //create the TreeStack ADT by adding stacks in the vector, note vector 0 is instantiated but not used.
          for (int i = 1;i<=TREE_CAPACITY;i++)
               tree.add(new ArrayStack(STACK_CAPACITY));
     public int size() {
          //return the size of the tree +1 (as 0 is not used)
          return tree.size();
     public ArrayStack element (int v) {
          //return the ArrayStack at v
          return (ArrayStack)tree.get(v);
     public int leftChild (int v ) {
          //return left child of v
          return v*2;
     public int rightChild (int v ) {
          //return the right child of v
          return v*2+1;
     public boolean children (int v ) {
          //search for children of v and return true if one exists
          for (int i =v;i<size();i++) {
               if (i/2==v ) {
                     //left child found at i
                     return true;
               if ((i-1)/2==v ) {
                    //right child found at i
                    return true;
          //no children found
          return false;
     public boolean isInternal (int v ) {
          //test whether node v is internal (has children)
          if (children (v)== true) {
               //has children
               return true;
          return false;
     //print the top value in each stack encountered on a level-order traversal of tree
     public void printLevelOrder() {
          //for every node of tree v
          for (int v = 1;v<size();v++) {
               if (!element(v).isEmpty() ) {
                    //print the top value in stack v
                    System.out.println(" "+element(v).top());
               else {
                    //stack at v is empty
                    System.out.println(" -");
     //pop off and print the top value in each stack encountered on a level-order traversal of tree
     public void printPopLevelOrder () {
          //pop off and print the top value in stack v
          for (int v = 1;v<size();v++) {
          //for each node of tree v
               if (!element(v).isEmpty() ) {
                    //if v isnt empty print the top value in stack v
                    System.out.println(" "+element(v).top());
                    //pop the top value in the stack at v
                    element(v).pop();
               else {
                    //stack at v is empty
                    System.out.println(" -");
     //pop off and print the top value in each stack encountered on an in-order traversal of tree
     public void printPopInorder () {
          printPopInorder (1);
     public void printPopInorder (int v) {
          boolean isInternal = false;
          if (isInternal (v)) {
               //use a boolean for isInternal to save on running the method twice
               isInternal = true;
               //recursively search left subtree
               printPopInorder (leftChild(v));
          //pop off and print the top value at v
          if (element(v).isEmpty() ) {
               //stack at v is empty
               System.out.println(" -");
          else {
               //if v isnt empty print the top value in stack v then pop
               System.out.println(" "+element(v).top());
               element(v).pop();
          if (isInternal ) {
               //recursively search right subtree
               printPopInorder (rightChild(v));
     //pop off and print the top value in each stack encountered on an pre-order traversal of tree
     public void printPopPreorder() {
          printPopPreorder(1);
     public void printPopPreorder(int v) {
          //pop off and print the top value at v
          if (!element(v).isEmpty() ) {
               //if v isnt empty print the top value in stack v then pop
               System.out.println(" "+element(v).top());
               element(v).pop();
          else {
               //stack at v is empty
               System.out.println(" -");
          if (isInternal (v)) {
               //recursively search left and right subtrees
               printPopPreorder (leftChild(v));
               printPopPreorder (rightChild(v));
     //pop off and print all values from the stack at the root
     public void printPopRoot (){
          //while the root stack has values left
          while (!element(1).isEmpty()) {
               //print, then pop
               System.out.println(" "+element(1).top());
               element(1).pop();
}

[solved]can't run java apps from command line

Every Java program that i've tried to run from command line gives me a error message like this:
augusto java% java Test
Exception in thread "main" java.lang.NoClassDefFoundError: Test
Caused by: java.lang.ClassNotFoundException: Test
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: Test. Program will exit.
`java Test.class` doesn't work too.
but, the exact same code work from eclipse, am I missing something?
Some info:
% ls Test*
Test.class Test.java Test.java~
% cat Test.java
public class Test{
public static void main(String[] args){
System.out.println("doesn't work");
% echo $PATH
/home/augusto/.bin:/home/augusto/.bin:/home/augusto/GNUstep/Tools:/opt/GNUstep/Local/Tools:/opt/GNUstep/System/Tools:/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/bin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/opt/qt/bin
Last edited by hack.augusto (2009-10-27 00:57:53)

also make sure that you current directory is in your classpath.
eg
export CLASSPATH=".:$CLASSPATH"
java Test
your issue is more likely to be classpath related, as java doesn't read the path variable, and the java executable is found
Last edited by bruce (2009-10-27 01:02:51)

Mac OS running DNG Converter from terminal

I would like to run a big batch job of DNG conversions from the Mac OS Terminal. I have test run a few files and there doesn't seem to be any output to the stout from the command. I was really hoping to write a text file that I could examine after the run.
Am I missing on a switch or is that just the way it works.

Thanks for responding G Sch.
LOL. Well this lemming doesn't habitually rename .exe files (e.g. Adobe DNG Converter.exe) to a non-spaced alternative either! (Adobe_DNG_Converter.exe)
Still no luck...
*** Here is my batch file...
REM Copy and DNG-convert files from CF
CD c:\RAW_files
dir c:\RAW_files
"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
dir c:\DNG_files
pause
***Here's the DOS shell output...
<<BEGINS>>
C:\RAW_files>dir c:\RAW_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\RAW_files
12/03/2008 10:29 AM <DIR> .
12/03/2008 10:29 AM <DIR> ..
11/03/2008 07:00 AM 10,661,632 _3110455.ORF
11/03/2008 07:01 AM 10,661,632 _3110457.ORF
11/03/2008 07:01 AM 10,661,632 _3110458.ORF
11/03/2008 07:02 AM 10,661,632 _3110460.ORF
11/03/2008 07:02 AM 10,661,632 _3110461.ORF
11/03/2008 07:03 AM 10,661,632 _3110462.ORF
11/03/2008 07:03 AM 10,661,632 _3110463.ORF
11/03/2008 07:04 AM 10,661,632 _3110464.ORF
11/03/2008 07:04 AM 10,661,632 _3110465.ORF
9 File(s) 95,954,688 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
C:\RAW_files>dir c:\DNG_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\DNG_files
12/03/2008 02:46 PM <DIR> .
12/03/2008 02:46 PM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>pause
Press any key to continue . . .
<<ENDS>>
As you can see (a) Source files exist(b) DNG command line runs without generating an error (c) no output files in destination.
DNG Converter did not run.
If I remove everything after the command (i.e. the parameter list stuff) it fires up DNG Converter in interactive mode. Not what I'm after.
Any other thoughts on what the problem is?
Thank you.
Rob

How to run the JNLP from Command Line

Hi All,
how to run the JNLP file from the remote machine from our command line. I have requirement to run this JNLP file in java 1.4.2 version. Can any one tell me the procedure or the steps that are needed to run this file at command prompt.
Regards,
Prasanna.
Edited by: VPrasanna on May 19, 2008 4:43 AM

>
I am getting "**java.security.AccessControlException: access denied (java.net.SocketPermission wwwgate0.mot.com:1080 connect,resolve)**" when I start the Web Start Client. >This seems like a largely separate problem to running the JNLP from the command line. It might have been better to end this thread (assign the dukes) and start a new one.
>
..Can you help me in resolving this issue. >However, I suspect I can guess the problem.
If this app. is normally hosted on wwwgate0.mot.com then it can 'phone home' to the server without further permission, but if you are running it from the command line, that might not be the codebase anymore.
If you wish to do 'local testing' of such an app., I would recommend setting up a server like Tomcat on the local machine, and serving the test app. directly off that.
>
..Its urgent...>Sun offers a number of options for urgent matters, such as support tickets. Perhaps you should look into one of those.

Problems Creating a CSV from command line

I have tried to create a csv file from the command line and get some unwanted lines of data in the output. Does anyone know how to create a csv without the extra lines from the command line.
I am using the following sequence of commands.
set wrap off
set termout off
set verify off
set heading off
set feedback off
set lines 900
set pages 9999
set newpage none
set embedded on
set colsep ','
set trimspool on
spool test6.lst
select * from rft;
spool off
When I run this from a script, I get exactly the data, which is what I want.
When I run this from the command prompt, I get an extra line at the start and one at the end of the csv file.
The data at the start is like this:
WMSP:wmsp:SQL*Plus> select * from rft;
The data at the end is like this:
WMSP:wmsp:SQL*Plus> spool off
Does anyone know how to keep these lines out of the data?
Thank you.

>
The data at the start is like this:
WMSP:wmsp:SQL*Plus> select * from rft;
The data at the end is like this:
WMSP:wmsp:SQL*Plus> spool off
Does anyone know how to keep these lines out of the
data?
Well, a workaround could be to use one of the gazillions of utilities in Unix/Linux to remove all lines having the sql prompt (SQL>), right after your "test6.lst" file has been created.
I am using the "perl pie" for the same in the code snippet that follows:
$
$ cat create_csv.sh
#!/bin/bash
sqlplus -s test/test << EOF
set wrap off
set termout off
set verify off
set heading off
set feedback off
set lines 900
set pages 9999
set newpage none
set embedded on
set colsep ','
set trimspool on
set echo off
spool test6.lst
select * from t;
spool off
EOF
# remove the lines that have the sql prompt: SQL>
perl -pi -e "s/SQL\>.*$|^$\n//g" test6.lst
$
$ # run the script, dump stdout to the null device
$ create_csv.sh 1>/dev/null
$
$ cat test6.lst
         1,a
         2,b
         3,c
         4,d
$
$Note that the "test6.lst" on my system had the prompt "SQL>". You will have to tweak that regular expression so that it works for the prompt in your "test6.lst" file.
pratz

Problem running DNG Converter from command line in Windows XP

Similar Messages

Maybe you are looking for