Problem running mod_jk but I am almost there

ignore this topic
Edited by: sly_is_the_man on May 30, 2009 8:03 AM

There could be a 32 bit vs 64 bit issues-is the old machine a 32 bit? and what is the new machine as far as 32/64 bit. I am not sure now if CS5 has in the help menu of the PS app the selection to update within PS if so that might work. I know that the Creative cloud app for installs updates etc has caused me much consternation over the last couple few years. Last it could be something like your Software firewall settings or anti-virus anti malware programs. I know that updating the infamous adobe flash that Internet Explorer pop ups setting and having AV turned on as opposed to off can interfere or plain break the update ability

Similar Messages

Got a strange problem, Can sync but after sync shows there is a problem and uninstalling

Ok I have the latest generation Nano, Windows 7 (64bit)
- All windows updates
- Correct and update Asus motherboard drivers
- Latest iTunes 10.6 install (64 bit) also have uninstalled and reinstalled
- Already restored iPod through iTunes
The Problem:
I connect the USB cable, the iPod connects and syncs correctly
Windows Devices and Printers shows the iPod in there no problem
IMMEDIATLY after sync the Devices and Printers shows the ipod with a yellow bang (exclamation mark) go to properties "error 21 uninstalling"
(go to more information says "usb Mass storage device is not working properly" "problem with PnP device")
Other USB Mass storage devices work fine (Thumb drives, hard drives, camera, webcam) - though I did take them off for troubleshooting sake.
I'm completly stumped, this is a pretty fresh reinstall of the OS, really not wanting to have to install it again, but if I have to I have to I guess. I've uninstalled iTunes, Apple Mobile driver, and reinstalled at least twice now. I have the correct and latest drivers from Intel, everything is up to date.
Also I've already gone into 'Disk Management' I made sure there where no conflicting drive letters.
Any other ideas?

I don't think it is caused by a hardware problem on the iPod, and any software problem on the iPod would be fixed with a Restore (which you said you did already). But can't rule out some odd hardware issue.
Try the "test" this way... Connect the iPod with iTunes running (disk mode enabled). In Windows, it should appear as a removable storage device. Eject the iPod's disk using Windows. I don't know exactly how you do it in Windows 7, but it would be the same thing you do to eject a USB flash drive or external drive, before disconnecting it.
So, with iTunes running, if you use Windows to eject the iPod (instead of iTunes), does that error come up?
ever time I connect the iPod get a pop up in the sys tray showing it's installing mass storage
That "pop up in the sys tray" does not happen every time you connect another type of "mass storage" device, like a USB external drive or flash drive, correct? It only happens with this iPod?

WiFi problem - network selected but Edge icon still there

I have been using WiFi for weeks with no problem. All of a sudden, it won't work. I came home and my laptop wasn't getting signal either. I had to power cycle the modem and router. Now my MacBook Pro is connecting to the network, but my iPhone still isn't. I tried choosing forget this network and reestablished it. But it still doesn't work. After I type in my WPA password it shows that the network IS connected - there's a checkmark. But the EDGE icon is still there rather than the WiFi icon. There's no Wifi, even though when I go to WiFi in settings it shows the network is connected.
Help, please. I heard people talk about resetting in iTunes. Does that wipe out of of your information, or what?

An iPhone Reset does not affect any data or settings.
Press and hold the Home key and Sleep/Wake or On/Off key simultaneously until you see the white Apple logo and then release. This can take up to 10 seconds or so and ignore the slide to turn off prompt waiting for the logo to appear.
There are two settings with an iPhone Restore with iTunes - which Restores the iPhone to factory settings - treat the iPhone as a new iPhone or Restore from backup. When syncing with iTunes, iTunes updates the iPhone backup file if any data stored on the iPhone that is not synced via the iTunes sync process was changed since the last sync such as Text messages, Notes, cities tracked via the Weather widget, stocks tracked via the Stocks widget, Bookmarked Maps, etc. but either way will require a complete sync transferring all data such as iTunes music and video, Address Book contacts, Calendar events, email account setup information, Safari bookmarks, etc.

Having problem running an application

I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
I have installed and deinstalled it a couple of time and can't make it work.
Could someone help me please!!
Thanking you in advance!

doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

TS1365 My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lig

My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lights up. Anyone else have this problem? Any ideas?
I'd love to repair it but not if it'll cost 500 bucks or more to replace the logicboard.
I appreciate any help
Michael

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

There is no problem in Outlook but Lync does not start. → "Microsoft Lync cannot be started"

hi,
There is no problem in Outlook but Lync does not start.
→
“Microsoft Lync cannot be started”
Addtional Info:Office2007（natural
but 32bit）is in use.
External devices except phone are not connected.
Not able to understand the issue. vene tried unistalled and re-install same issue.
Is there any add-in kind of issue?

What happens if you have no outlook.exe and any office software such as word excel or powerpoint running and then you try to launch Lync Does it still fails Can you give more detail about the error in that scenario?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer". Regards Edwin Anthony Joseph

Strange problem... Query runs faster, but report runs slow...

Hi Gurus,
We are using Report 10g on 10g Application server and solaris. we created a report on a table which has 10,000 rows. The report has 25 columns. when we run this query in Toad it took 12 sec for fetching all these 10,000 rows
But when we run the report with Destype = 'FILE' and Desformat = 'DELIMITEDDDATA', it is taking 5 to 8 minutes
to open in excel ( we concatenated mimetype=vnd-msexcel at the end of the url if the Destype=FILE). We removed the layout in the report as it is taking 10 to 15 mins to run to Screen with Desformat=HTML/PDF(formating pages taking more time). We are wondering why DELIMITEDDATA format is taking long time as it runs only query.
Does RWSERVLET take more time of writing the data to the Physical file in the cache dir? Our cache size is 1 GB. we have 2 report servers clustered. Tracing is off.
Please advise me if there are any report server settings to boost the performance.
Thanks alot,
Ram.

Duplicate of Strange problem... Query runs faster, but report runs slow... in the Reports forum.
[Thread closed]

TS3408 I keep on getting this error message on my Yahoo and Safari You're almost there, but your web browser doesn't support the newest version of Yahoo! Mail

I keep on getting this error message on my Yahoo and Safari all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade don't work !
I have Safari Version 5.1.7 the latest for Snow Leapord. I get the same error message on Firefox and Google Crome aI even dowmloaded another Brower for Mac still got he same error message ! I have used the Disk Utility to rparir files and rest Safari. I have deleated Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nutts.

Perky --
You do not need any "Cleaner" app for Macs. I would not be at all surprised if that didn't actually damage your Mac, especially if it were MacDefender. Applejack is OK, but I'm not sure what it erased. Do you know?
You also don't need any Virus Barrier. That could also mess things up.
The fact that all of your browsers are now messed up indicates that it is not a Safari problem, but more system-wide.
Did you check here?
http://help.yahoo.com/l/us/yahoo/mail/yahoomail/technical/

I keep on getting this error message on my Yahoo mail. You're almost there, but your web browser doesn't support the newest version of Yahoo! Mail

I keep on getting this error message on my Yahoo mail all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade are blocked
I have latest version of FireFox 19 and Snow Leopard. I get the same error message on Safari and Google Crome aI even downloaded another Browser for Mac still got he same error message ! I have used the Disk Utility to repair files and rest Safari. I have deleted Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nuts.

You can check for problems caused by a possibly corrupted user agent.
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Are there any problems running oracle database express 10g and iis together

Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
Does oracle database express cause any conflicts with iis (because of used ports etc)
Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

I would not expect a problem under normal circumstances.
Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher?

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

HT1338 my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help

my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help

Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
(73181)

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

Problem running mod_jk but I am almost there

Similar Messages

Maybe you are looking for