Problem running Recovery

Hi,
I have a Compaq Presario CQ61-318SO with Windows 7 64bit. Yesterday, I dropped my laptop accidently and after that I tried to start the laptop but I got the following message:
                                                                                                   Windows Boot manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next"
3. Click "Repair your computer"
if you do not have this disc, contact your system administrator or computer manufacturer for assistance.
status: Oxc0000225
Info: The boot selection failed because a required device is inaccessible.
Enter= Continue                                                              Esc= Exit
After the message, I clicked on Continue, it happened nothin. Then I restarted and ran hard disk test . The result was "hard disk not Exist".
After that I changed the boot  order to CD and tried to run recovery form my recovery CDs' but after loading files and showing windows logo it showed only an arrow with black screen and nothing happened.  
Can anybody tell me is my "Hard disk" which is faulty and need to be replaced or do I need to order new recovery dics?
I also opened hard disk cover and slackened the hard disk screws and tried to see if any thing wrong with hard disk like if anything is broken but I saw nothing. I tried to shaken the hard disk and I heard a noise that may b a screw or else is colliding with other parts of hard disk. I dont know if it is normal.
Anybody please help!
Thanks in advance,
Kashif

RNR is attempting to call Windows VSS(volume shadow service).SHADOW: Call to InitializeForBackup failed - dwRet = 0x000005a4 - hrRet = 0x80042302hrRet = 0x80042302 is the windows return codedwRet = 0x000005a4  is a RNR return code. Check to make sure the VSS service is started in windows services.Name: Volume Shadow Copy     Start Type should be AutomaticAdmin tools>services  to bring up the services screenhttp://www.sevenforums.com/backup-restore/218352-volume-shadow-service-component-error-0x80042302.html http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-code-0x80042302-while-performing-system/3a456d69-e556-e011-8dfc-68b599b31bf5 Within the microsoft link is  this reply:To fix this error, go to the 'run command' and type in "services.msc"
ensure that the following services are set to automatic:
> "System Event Notification Service"
> "COM+ Event System"
> "COM+ System Application"
> "Virtual Shadow Copy"   

Similar Messages

  • Please help, problems running recovery

    hi, i have a satellite P755-S5262 RUNNING WINDOWS 7 64BIT WITH AN i7 PROCESSOR
    when i first got my laptop i was having some minor problems with it so i did a restore from the harddrive and that fixed things up. i made some recovery media and the went about setting it up, the made a backup with nere back it up 11.  later on more problems and i tried to restore from nero back up and backup didn't work so i tried recovery and it won't recover from the hard drive but my recoverey media worked and everything was fine.  so one late sleepy night 
    i triede to install some free software which didn't work so i uninstalled it using REvo uninstall and made a bad mistake, windows would not boot. most of the repair options, including toshiba recovery were not coming up.
    i had my media but after inserting disc one it said files were loading and the nothing happened.  anyway i finally got
    recoverey to come up but after choosing out of box recovery with partitions the same i got thew message preparing partitiuons and the error 08-0E89-0000 PARTITION preperation failed
    please help!

    If the problem is with the recovery media, ordering replacement recovery media might be able to help.
    If that doesn't work, it could be a failing hard drive.
    - Peter

  • Berkeley db fatal region error detected run recovery

    Hi,
    I have initiated d Berkeley DB object.
    Then, I am using multithreading to put data into the DB.
    Here is how I open the one data handler.
    ret = dbp->open(dbp, /* Pointer to the database */
    NULL, /* Txn pointer */
    db_file_name, /* File name */
    db_logical_name , /* Logical db name (unneeded) */
    DB_BTREE, /* Database type (using btree) */
    DB_CREATE, /* Open flags */
    0644); /* File mode. Using defaults */
    each threads would put data into the same handler when it needs to.
    I am getting "berkeley db fatal region error detected run recovery".
    What is the problem? Does it have anything to do with the way the handler is created or whether multiple threads can put data into the DB?
    jb

    Hi jb,
    user8712854 wrote:
    I am getting "berkeley db fatal region error detected run recovery".This is a generic Berkeley DB panic message that means something went wrong. When do you get this error? Did you enable the verbose error messages? Are there any other warning/error messages reported? By just posting the way you open the database doesn't help much at all. I reviewed the other questions you asked on the forum, and it seems that you are not following the advices and consult the documentation, but you prefer to open new threads. I advice you to first work on configuring Berkeley DB for your needs and read the following pages in order to understand which Berkeley DB Product best suits your application and how it should be configured for a multithreaded application:
    [The Berkeley DB products|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/intro/products.html]
    [Concurrent Data Store introduction|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/cam/intro.html]
    [Multithreaded applications|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/mt.html]
    [Berkeley DB handles|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/scope.html]
    On the other hand, if the code that's calling the Berkeley DB APIs is not too big and is not private, you can post it here so we can review it for you and let you know what's wrong with it.
    The procedures you should follow in order to fix a "run recovery" error are described here:
    [Recovery procedures|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/transapp/recovery.html]
    Thanks,
    Bogdan Coman

  • Started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility?

    started to run recovery disc assistant on a backup hard drve-stopped when it said it would erase all data-but now can't inialize the external drive nor repair it with disc utility. what to do?

    Activity Monitor – Monitor Performance Problems  
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • Db_verify: PANIC: fatal region error detected; run recovery

    We have an application that is using bdb. On one of the instances it frequently hits a panic condition. db_verify reports the following:
    # db_verify -o file.db
    db_verify: PANIC: fatal region error detected; run recovery
    db_verify -VSleepycat Software: Berkeley DB 4.3.29: (June 16, 2006)
    Quitting the application and removing the __db.001 file will allow a clean restart. How do I debug where this problem might be coming from?
    thanks,
    kevin

    Hi Kevin,
    user11964780 wrote:
    # db_verify -o file.db
    db_verify: PANIC: fatal region error detected; run recoveryThis is a generic error message that means the region files are corrupted. This is most often a problem in the application.
    user11964780 wrote:
    How do I debug where this problem might be coming from?Reference Guide - Chapter 24: [ Debugging Applications|http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/debug.html]
    Bogdan Coman

  • Fatal region error detected; run  Recovery

    I try include 2600 documents 1,06 GB and I have the message (Fatal region error detected; run Recovery ). I executed db_recover.exe to try resolve the problem without sucess. I did this test in 3 differents computers and I had the same problem. I am use a free version , I am studyng berkeley db xml and need test performance with a big collection of document xml. Why am I have problem if berkeley db xml is able to support terabyte in size.

    This message indicates that you are probably setting your Berkeley DB cache size too large. MapViewOfFile is the Windows API used to map the cache file. It will fail if Windows cannot find enough contiguous VM for the mapping.
    Regards,
    George
    I have about 30 documents ~10MB and I get this all
    the time.
    MapViewOfFile: Not enough storage is available to
    process this command.
    PANIC: Not enough space
    com.sleepycat.db.RunRecoveryException:
    DB_RUNRECOVERY: Fatal error, run database recovery:
    DB_RUNRECOVERY: Fatal error, run database recovery
    at
    t
    com.sleepycat.db.internal.db_javaJNI.DbEnv_open(Native
    Method)
    at
    t
    com.sleepycat.db.internal.DbEnv.open(DbEnv.java:262)
    at
    t
    com.sleepycat.db.EnvironmentConfig.openEnvironment(Env
    ironmentConfig.java:908)
    at
    t
    com.sleepycat.db.Environment.<init>(Environment.java:3
    0
    This is under WinXP with BDXML 2.3.10.

  • Toshiba - I cannot run Recovery DVDs successfully

    I appreciate if somebody can help me to solve my problem as explained below.
    My Toshiba laptop L650 developed some problems that is when I decided to resotore to its original form by running Recover DVDs which I created earlier using Toshiba Tempro.  Unfortunately, recovery process did not complete and I got error message which says "Boot manager missing", screen became black and I could not start my laptop.  Another bad news is that my HDD was formatted and I loose all my data in C&D drives.
    Also I would like to know if recovery CD/DVDs do back up of C&D drives data.
    How can I run recovery DVDs successfully?

    Hi
    I dont think that the hacker or the virus is responsible for non CD drive booting. I cant believe it. In my opinion if the drive cannot read the CD so possibly the CD is corrupt or the drive has a malfunction.
    However, in my opinion you should be able to enter the BIOS. As mentioned above you can use the ESC and then F1 to enter the Toshiba BIOS. But if there is a Phoenix BIOS preinstalled so you have to use the F2 key. You have to press this buttons immediately after pressing the power button.
    On my notebook I can also use the F12 key and the booting menu appears.
    Then I can use the arrow buttons to select the booting device.
    If you are not able to boot from the recovery CD so try to boot from the original Microsoft Windows CD.
    Possibly it helps. Good luck :|

  • Satellite 3011G freezes running recovery during format process

    I work at a computer store, but I figure it's better to try and post here and hope for the best than send the computer. I am working on back to Toshiba as DOA.
    Basically, the problem is, when I run recovery, the computer freezes during format process at "Progress 23 - 11 minutes remaining".
    Since it's not the first time I have this problem with this particular model, I wonder if someone smarter than me has figured out a workaround... The OS is of Windows Vista and I use original CDs to run the recovery.
    Any help would be appreciated.
    PS. Excuse the bad English, I am typing this with my left toe (figuratively). A lot of work today, heh.

    The Satellite 3011G is not known to me. Are you sure you have typed the right notebooks series?!
    Anyway, usually the installation should run smoothly, without any malfunctions.
    Either the HDD was formatted in the wrong way or the HDD could malfunctions.
    So in firstly you should format the HDD and erase all partitions from HDD
    I have noticed many times that a wrong HDD partitions could have a bad influence on the OS installation from the Recovery CD!

  • Missing partitions after running Recovery from previous System Image Backup in Windows 8.1

    After running Recovery from a recent Sytem Image Backup the LRS_ESP partition is now missing and the Used space on the  PBR_DRV partition is reported as 95.20MB while it previously reported 9.52GB in use. The WINRE_DRV, SYSTEM_DRV, Windows8_OS and D:LENOVO partions appear to be OK. 
    I ran the Recover after replacing the original 500GB HDD with a 1TB. Any details/links/recommendations on recreating/correcting the LRS_ESP and PBR_DRV partitions? Thanks!

    Here are the before and after partition details obtained through Partition Wizard:
    Link to image 1
    Link to image 2
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

  • Problem Running SSIS Package with a SQL Server Agent

    SQL Server: SQL Server 2012
    VS: Visual Studio 2012
    Hello,
          I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
    Store) instance on my SQL Server and tried to create a job that would run them from there.
          At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
    use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
    The connection manager "TestFile" is an incorrect type.  The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
    Cannot open the datafile "O:\*****\Success.txt"
    I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers  in this test project one for grabbing the source file and one for
    creating the new test file.
    I am not sure what to do.
    Thanks in advance,
    Matt

    I accidently created two posts. The newest one has the details.
    I did not mean to.
    SQL Server: SQL Server 2012
    VS: Visual Studio 2012
    Hello,
          I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
    Store) instance on my SQL Server and tried to create a job that would run them from there.
          At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
    use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
    The connection manager "TestFile" is an incorrect type.  The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
    Cannot open the datafile "O:\*****\Success.txt"
    I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers  in this test project one for grabbing the source file and one for
    creating the new test file.
    I am not sure what to do.
    Thanks in advance,
    Matt

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Problem running BI template installer after upgrade to 2004s

    Hello,
    After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
    But there are only three parameters in the sheet :
    HOST, SYSTEM_ID, INSTANCE_ID.
    If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
    My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
    Thanks
    Boaz

    Hi Kaylan,
    Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
    - check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
    - the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
    If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
    Best Regards Roland

  • Having problem running an application

    I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
    The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
    I have installed and deinstalled it a couple of time and can't make it work.
    Could someone help me please!!
    Thanking you in advance!

    doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

  • Problem running Lex in project created with Forte C++

    I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
    I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
    Which causes the following error message lex: illegal option -- o
    I checked the man pages and Lex doesn't have a -o option.
    Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
    Ron

    I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
    Which causes the following error message lex: illegal option -- o
    I checked the man pages and Lex doesn't have a -o option.
    Yes, try in google.com
    Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

Maybe you are looking for