Problem running TestCases in SeismicXML project

I've tried to run the Test Cases in the "SeismicXML" samples using the "UnitTests" target and I always get the following error when I build:
"error: Failed tests for architecture 'i386' (CG OFF)"
Has anyone else had this problem?

That sounds reasonable. I'm trying to figure out how to "uninstall" OCUnitRoot now. In the meantime I've tried to create a new project and added a new Target without specifying any special external frameworks but no success yet.
Please let me know if you figure it out. I'll do the same.

Similar Messages

Problem running Lex in project created with Forte C++

I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
Ron

I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Yes, try in google.com
Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

Problem running FlexUnit test in FlashBuilder

Hello,
I am trying to run a FlexUnit Test within FlashBuilder. I did the following things:
1. Created a new project.
2. Created a new TestCase class.
3. Create a test method annotated by [Test]
4. Run then test by righclicking on the project and selecting runas --> FlexUnit Tests
The project runs and when I run in debug, I can see the tests get executed by stepping through them. The problem is after the tests are run, it seems to get hung.
When I go to FlashBuilder, I see the following in the FlexUnit resulots.
It is almost as if it is getting hung. I have tried recreating the project and going through the process several times with no luck. Is there a configuration in FlashBuilder than I may have wrong that may be contributing to this?
Thanks,
Shon

Hello,
I am trying to run a FlexUnit Test within FlashBuilder. I did the following things:
1. Created a new project.
2. Created a new TestCase class.
3. Create a test method annotated by [Test]
4. Run then test by righclicking on the project and selecting runas --> FlexUnit Tests
The project runs and when I run in debug, I can see the tests get executed by stepping through them. The problem is after the tests are run, it seems to get hung.
When I go to FlashBuilder, I see the following in the FlexUnit resulots.
It is almost as if it is getting hung. I have tried recreating the project and going through the process several times with no luck. Is there a configuration in FlashBuilder than I may have wrong that may be contributing to this?
Thanks,
Shon

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Problems running Photoshop CS6 under OS 10.8 Mountain Lion

Since updating the OS from 10.6.7 to OS 10.8 on iMacs (21" and 24" Intel 2.4GHz) I have experienced problems running Photoshop. The app boots up fine and I can start a project as normal, but when I click on a tool to change it's usage I get the spinning beach ball, this lasts about 5 - 10 seconds and then the tool drop down menu appears. After this, I get the beach ball appearing every few minutes as I try to work, and the only way to get Photoshop running efficiently is to close it down and then restart.
Any ideas as to the cause? I've read on forums from both Adobe and Apple that apparently there are no compatibility issues between Mountain Lion and CS6 but I never had this problem previously under Snow Leopard.

The next two remedial steps would be to reset all tools by right-clicking here:
and if that does not resolve the problem, reset Preferences;
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Problems running servlet due to missing classes?

Hi everyone,
I am doing a project which requires me to convert a java coding into a servlet. This java coding I am working on is some kind of location based service which tracks people (receiving an argument of a string as IP). It imports an external SDK called Ekahau SDK (some off the shelve product). Now I wish to convert it into a servlet so that the function that the java coding performs can be run from a webpage i created.
I have previously posted a thread on this forum called "Converting java coding into servlets?" when I had trouble compiling the servlet. Now that I could compile the servlet already, I still have problems running the servlet from my browser.
The webserver I am using is Apache Tomcat. Previously I was trying Apache HTTP server but since now I need to use servlet, I have shifted to Tomcat instead. I have been getting these "java.lang.NoClassDefFoundError:" when running the servlet from the browser. From the previous thread, I got suggestions from the replies saying that I need to put the jar files I need into my "C:\Tomcat\webapps\try\WEB-INF\lib" directory. I have been looking for the missing jar files from the internet and putting them into my "C:\Tomcat\webapps\try\WEB-INF\lib", but each time after adding a new jar file, I get another new "java.lang.NoClassDefFoundError:". Are the missing jar files really the problems? Cause it seems a bit weird to me that I need some many jar files which I dont even know why I need them for.
The HTTP status 500 error look like this:
description
The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.NoClassDefFoundError: org/apache/excalibur/configuration/CascadingConfiguration
com.ekahau.G.N.A(Unknown Source)
com.ekahau.G.N.<init>(Unknown Source)
com.ekahau.sdk.imp.yax.D.<init>(Unknown Source)
com.ekahau.sdk.imp.yax.E.connect(Unknown Source)
com.ekahau.sdk.PositioningEngine.connect(Unknown Source)
coreservlets.testing.find(testing.java:75)
coreservlets.testing.doGet(testing.java:36)
javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
Here are the series of jar files I have been looking from the internet to add them into my "C:\Tomcat\webapps\try\WEB-INF\lib" directory:
1) org/apache/commons/collections/Closure
2) org/apache/log4j/Logger
3) org/apache/commons/lang/Validate
4) org/apache/excalibur/configuration/CascadingConfiguration
Please help~~ Thanks a lot.
My servlet coding is like this:
package coreservlets;
import java.io.*;
import java.util.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import com.ekahau.sdk.*;
public class testing extends HttpServlet
     String ipAddress;
     int result;
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
              ipAddress = request.getParameter("deviceIP");
          try
               result = find();
          catch (IOException e)
               System.out.println("Error..." + e.toString());
          catch (EngineException e)
               System.out.println("Error..." + e.toString());
          response.setContentType("text/html");
              PrintWriter write = response.getWriter();
          write.println("<HTML>\n" +
"<HEAD><TITLE>Tryget</TITLE></HEAD>\n" +
"<BODY BGCOLOR=\"#FDF5E6\">\n" +
result +
"</BODY></HTML>");
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
              doGet(request, response);
     public int find() throws EngineException, IOException
          PositioningEngine.connect();
              // Find the given device:
              Device[] devices = PositioningEngine.findDevice("NETWORK.IP-ADDRESS", ipAddress);
              if (devices.length == 0)
                     System.err.println("Device with IP address " + ipAddress + " not found.");
               PositioningEngine.disconnect();
               return 0;
          else
                     TrackedDevice device = new TrackedDevice(devices[0]);
                     // Create a simple handler for locations for one-time usage:
                     LocationEstimateListener estimateListener = new LocationEstimateListener()
                       public void handleLocationEstimate(LocationEstimate locationEstimate, TrackedDevice device)
                              // Change getLatestLocation to getAccurateLocation if you want
                              // a bit more accurate but a few seconds delayed location.
                              Location loc = locationEstimate.getLatestLocation();
                         final double coX = loc.getX();
                         final double coY = loc.getY();
                         try{
                         FileWriter file = new FileWriter ("C:\\Documents and Settings\\xamule\\Desktop\\Testing\\output\\output.txt");
                         String x = Double.toString(coX);
                         String y = Double.toString(coY);
                         String coor = x + "\t" + y;
                         file.write(coor);
                         file.close();
                         catch (IOException e){
                         System.out.println("Error..." + e.toString());
               StatusListener statusListener = new StatusListener()
                       public void handleStatus(Status status, TrackedDevice device)
                              System.err.println(new Date()+"\tStatus for device: " + status);
                     // Add listeners and start tracking
                     device.addLocationEstimateListener(estimateListener);
                     device.addStatusListener(statusListener);
                     device.setTrackingParameter("EPE.LOCATION_UPDATE_INTERVAL","6000");
                     device.setTracking(true);
                     // Wait until user inputs something. When he/she does, stop tracking and quit application
                     //BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
                     //in.readLine();
                     // Stop tracking and disconnect from the positioning engine:
                     device.setTracking(false);
                     PositioningEngine.disconnect();
               return 1;
}

Well, it's kind of logical that as you put more jar files (classes) in Tomcat, it changes the error to ask for the classes (inside a jar) it cannot find.
There was a good class->jar finder on the internet some years ago, but i don't remember the address. Try looking for that and search all the missing classes (NotDefined) and their correspondig jar files.
Good Luck!

10.1.3 - Problems adding existing files and projects

I am having some very basic issues with the latest JDeveloper 10g (10.1.3) - Preview Release, all related to adding existing files and projects to JDeveloper.
http://jdeveloper.us.oracle.com/
http://jdeveloper.us.oracle.com/jdev_index.uix?bajaPage=menu=0%24menu_option=0%24tab=3
http://jdeveloper.us.oracle.com/download/software/10g/1013Preview/jdevj2ee1013.zip
Oracle JDeveloper 10g (10.1.3) - Preview Release, Nov-2004
Version 10.1.3.0.2.223
Build JTINTEG_MAIN_NT_041202.0854.223
Setup JDeveloper
===============
1) Unzip jdevj2ee1013.zip to c:\jdev101302_233
2) Run c:\jdev101302_233\jdev\bin\jdev.exe
3) Would you like to migrate from a previous version of JDeveloper? No
Attempt to add a java file to a new Project
==========================================
1) Right click on Applications and select New Application Workspace...
2) Create Application
Application Name: VTF_C
3) Create Project
Project Name: VTFclean
4) Attempt to add a source file to the project
a) File Open...
Select a file.
PROBLEM 1: File is opened, but is not automatically added to project and I am also not prompted with the 'Add Project Source Path' dialog.
b) Attempt to drag/drop file onto VTFclean project
Get 'Add Project Source Path' Dialog
The project source path must be updated in order to add the selected file or files.
Do you want to update the project source path? Yes
PROBLEM 2: JDeveloper hangs
Attempt to import a previous JDeveloper project
==============================================
1) File Open...
Select VTFclean.jpr and press 'Open' button.
2) Create Application
Application Name: VTF
Press 'OK' button
3) Open Warning
You are about to migrate project C:\oracle\dss\vtf\build\VTFclean.jar to JDeveloper 10g Developer Preview release 10.1.3.0.2 file format.
Once the project is migrated you will not be able to reopen it using an older version of JDeveloper. We will back up your project file, you may want to back up the project contents before proceeding.
Do you want to migrate these files? Yes
4) Migrating Progress Dialog displays
Migrating files to JDeveloper 10g Developer Preview version 10.1.3.0.2 format....
Problem 3: JDeveloper hangs whether initial project was based on 9.0.5.x or 10.1.2.x
Questions:
==========
1) Am I missing something obvious or are these simply bugs?
2) Is there a particular reason why there is no reference to JDeveloper 10.1.2 on the http://jdeveloper.us.oracle.com website?
3) Why were the 'Add to Applications...' and 'Add to Project...' buttons removed from the 'Applications - Navigator'?
I found them very helpful and used them to add items to existing Applications and Projects.
I have duplicated these problems on two different Windows XP systems. Neither JDeveloper 10.1.2 or 9.0.5 builds have exhibited these problems.

Hi Shay,
This dynamic project source feature is going to kill us! We have more than 15,000 files in our projects. Currently, part of them are managed by JDeveloper. Developers have option to load only the files they are working on. If all files in the project source will be loaded automatically, that will definitely be a nightmare to us. The JDeveloper will be frozen from time to time when it start to looking for new files...
Think about why people pick Oracle instead of SQL Server - Oracle is good in handling large data. We, JDeveloper users, sincerely hope JDeveloper team can design/test the JDeveloper on large scaled project before formally release it.
Thanks for your hard work though.
Charles

Running an AS3 mobile project on Android 4.1

I am using Flash Builder 4.6 on Mac OSX and I am trying to run a mobile actionscript project on Android 4.1 on an A1CS Fusion 5 premium+ tablet. Flash builder run configurations does not find connected device. Tablet is in debug mode with mass storage turned off and says it is USB connected. The Mac Finder sees the tablet when it is in storage mode, so USB connection is good. How do we fix this?

I've had similar problems with PC and had to install drivers for the relevant devices. Not sure what the Mac equivalent is, but looking at the Android SDK docs is a good place to start as they have helped me to resolve connection to several devices in addition to allowing me to install a number of Google provided drivers.
G

How Can I Run A SQLJ Normal Project In SAP NWDS

I have a question about SQLJ in SAP NWDS.
1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
2.I created a java normal project including the above java dictionary project.
3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
4.I coded the normal project,and export the project .jar,everything is ok.
<b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
Exception in thread "main"</b>
How Can I Run A SQLJ Normal Project In SAP NWDS?
PLS Help me and don't let me alone!

Tony,
Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
Chill out!!!
Sukanta Rudra
Note: If helpful, plz donate some points.

I need a solution of this complicated problem to finalize my final project

Introduction
This project revolves around an important text processing task, text compression. In particular, you will be required to encode a sequence of words read from a source file into binary strings (using only the characters 0 and 1). It is important to note that text compression makes it possible to minimize the time needed to transmit text over a low-bandwidth channel, such as infrared connection. Moreover, text compression is helpful in storing large documents more efficiently. The coding scheme explored in this project is the Huffman Coding Scheme. While standard encoding schemes, such as Unicode and ASCII, use fixed-length binary strings to encode characters, Huffman coding assigns variable-length codes to characters. The length of a Huffman code depends on the relative frequency of its associated character. Specifically, Huffman coding capitalizes on the fact that some characters are used more frequently than others to use short codewords when encoding high-frequency characters and long codewords to encode low-frequency characters. Huffman coding saves space over state of the art fixed-length encoding and is therefore at the heart of file compression techniques in common use today. Figure 1 shows the relative frequencies of the letters of the alphabet as they appear in a representative sample of English documents.
Letter     Frequency     Letter     Frequency
A     77     N     67
B     17     O     67
C     32     P     20
D     42     Q     5
E     120     R     59
F     24     S     67
G     17     T     85
H     50     U     37
I     76     V     12
J     4     W     22
K     7     X     4
L     42     Y     22
M     24     Z     2
Figure 1. Relative frequencies for the 26 letters of the alphabet.
Huffman coding and decoding
Huffman’s algorithm for producing optimal variable-length codes is based on the construction of a binary tree T that represents the code. In other words, the Huffman code for each character is derived from a full binary tree known as the Huffman coding tree, or simply the Huffman tree. Each edge in the Huffman tree represents a bit in a codeword, with each edge connecting a node with its left child representing a “0” and each edge connecting a node with its right child representing a “1”. Each external node in the tree is associated with a specific character, and the Huffman code for a character is defined by the sequence of bits in the path from the root to the leaf corresponding to that character. Given codes for the characters, it is a simple matter to use these codes to encode a text message. You will have simply to replace each letter in the string with its binary code (a lookup table can be used for this purpose).
In this project, you are not going to use the table given in Figure 1 to determine the frequency of occurrence per character. Instead, you will derive the frequency corresponding to a character by counting the number of times that character appears in an input file. For example, if the input file contains the following line of text “a fast runner need never be afraid of the dark”, then the frequencies listed in the table given in Figure 2 should be used per character:
Character          a     b     d     e     f     H     i     k     n     O     r     s     t     u     v
Frequency     9     5     1     3     7     3     1     1     1     4     1     5     1     2     1     1
Figure 2. The frequency of each character of the String X.
Based on the frequencies shown in Figure 2, the Huffman tree depicted in Figure 3 can be constructed:
Figure 3. Huffman tree for String X.
The code for a character is thus obtained by tracing the path from the root of the Huffman tree to the external node where that character is stored, and associating a left edge with 0 and a right edge with 1. In the context of the considered example for instance, the code for “a” is 010, and the code for “f” is 1100.
Once the Huffman tree is constructed and the message obtained from the input file has been encoded, decoding the message is done by looking at the bits in the coded string from left to right until all characters are decoded. This can be done by using the Huffman tree in a reverse process from that used to generate the codes. Decoding the bit string begins at the root of the tree. Branches are taken depending on the bit value – left for ‘0’ and right for ‘1’ – until reaching a leaf node. This leaf contains the first character in the message. The next bit in the code is then processed from the root again to start the next character. The process is repeated until all the remaining characters are decoded. For example, to decode the string “0101100” in the case of the example under study, you begin at the root of the tree and take a left branch for the first bit which is ‘0’. Since the next bit is a ‘1’, you take a right branch. Then, you take a left branch (for the third bit ‘1’), arriving at the leaf node corresponding to the letter a. Thus, the first letter of the coded word is a. You then begin again at the root of the tree to process the fourth bit, which is a ‘1’. Taking 2 right branches then two left branches, you reach the leaf node corresponding to the letter f.
Problem statement
You are required to implement the Huffman coding/decoding algorithms. After you complete the implementation of the coding/decoding processes, you are asked to use the resulting Java code to:
1.     Read through a source file called “in1.dat” that contains the following paragraph:
“the Huffman coding algorithm views each of the d distinct characters of the string X as being in separate Huffman trees initially with each tree composed of a single leaf node these separate trees will eventually be joined into a single Huffman tree in each round the algorithm takes the two binary trees with the smallest frequencies and merges them into a single binary tree it repeats this process until only one tree is left.”
2.     Determine the actual frequencies for all the letters in the file.
3.     Use the frequencies from the previous step to create a Huffman coding tree before you assign codes to individual letters. Use the LinkedBinaryTree class that we developed in class to realize your Huffman coding trees.
4.     Produce an encoded version of the input file “in1.dat” and then store it in an output file called “out.dat”.
5.     Finally, the decoding algorithm will come into play to decipher the codes contained in “out.dat”. The resulting decoded message should be written to an output file called “in2.dat”. If nothing goes wrong, the text stored in “in1.dat” and the one in “in2.dat” must match up correctly.

jschell wrote:
I need a solution of this complicated problem to finalize my final project The solution:
1. Write code
2. Test code3. If test fails, debug code, then go to step 2.

Error running Execution plan for 'Project Analytics in PeopleSoft 9.0 '

Hi ,
I am running execution plan for Projects Peoplesoft 9.0 (BI Apps version 7.9.6)
The issue is the file type data source went thru the database (data warehouse)
the tasks that were completed SUCCESS were from the File source only from (SrcFiles).
error as below.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_PSFT_90_Adaptor:SDE_PSFT_ExchangeRateDimension_Full:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_PSFT_ExchangeRateDimension_Full
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
one more info,if this helps
values defined in the Parameters of the execution plan.
1     DATASOURCE     ,DBConnection_OLAP     is 'DataWarehouse'
1 DATASOURCE     ,DBConnection_OLTP     is 'PSFT_9_0_FINSCM'
1     DATASOURCE     ,FlatFileConnection     is 'PSFT_9_0_FlatFile'
The 'Relational Connection' In Informatica Repository Manager is currently pointing to only 'PSFT_9_0_FINSCM'
& 'DataWarehouse'
Please let me know what is wrong?
Regards,
JK

Hi ,
I created the PSFT connection in 'Applicaiton connection' of Repository manager.
Also the Informatica server's tnsnames.ora should have entry for the source( PSFT database) and that of the datawarehouse.
thanks,
JK

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

Having problem running an application

I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
I have installed and deinstalled it a couple of time and can't make it work.
Could someone help me please!!
Thanking you in advance!

doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

Trouble printing something out. Getting error message: There is a problem running Adobe Acrobat Reader. If it's running please exit and try again. 6:6

Getting message: There is a problem running adobe Acrobat Reader. If it's running, please exit and try again. 6:6

Hi garryw,
What version of Reader are you using, and are you on Mac OS or Windows? Do you get the same error when you try to print other PDF files, or is the problem specific to one PDF?
For starters, please try the solutions listed in this thread: Re: There is a problem with Adobe Acrobat /Reader. If it is running ,please exit and try again.(0:104)
Let us know how it goes.
Best,
Sara

Problem running TestCases in SeismicXML project

Similar Messages

Maybe you are looking for