Problem running windows_imagecreator.exe

Hi,
I have downloaded all the 7 parts of Siebel Application... Now, to create image creator i tried to rum windows_imagecreator.exe file... but it gives me the following error
java.lang.noclassDefFoundError: run Exception in thread "main"
What could be the problem?
Please help me out...

Hi,
Do you have an updated Java Runtime installed?
Regards,
Shalabhsneha

Similar Messages

Problem run Sapinst.exe

Hi, i have the problem with run sapinst.exe
I installing Netweaver 7.0 EHP2 in Windows 2003 server 32 bits
i have the following number installation:
- 51040135_11      BS7i2010 Installation Master Windows Server on IA32 32bit
- 51040135_12      BS7i2010 Installation Master Windows Server on IA64 64bit
- 51040135_13      BS7i2010 Installation Master Windows Server on x64 64bit
I using option 51040135_11 but no show all options installations, only show option: "standalone Engines", "optional standalone units" and "Software life-cycle option"
Whe run option 51040135_13 show messages: "sapinst.exe is valid, but is for a machine type toher than the current machine".
The option 51040135_13 if show all option installtions. I need install netweaver 7.0 EHP2 stack Java.
I could help?

Hi,
It seems for windows 32 bit OS there is no installation options for NW7 EHP2
WINDOWS SERVER 2003/IA32 32BIT Released Conditionally 19.04.2010
WINDOWS SERVER 2003/IA64 64BIT Released 19.04.2010
WINDOWS SERVER 2003/X64 64BIT Released 19.04.2010
WINDOWS SERVER 2008/IA64 64BIT Released 19.04.2010
WINDOWS SERVER 2008/X64 64BIT Released 19.04.2010
WINDOWS SRV 2008 R2/X64 64BIT Released 02.07.2010
See the PAM for NW7 EHP2.
I think its better to have a 64 bit machine or install lower version of SAP.
Thanks
Deepthi

Psexec - problem run regedit.exe under windows 8.1

i just made some stupid things with a registry key under CLSID (win 8.1 32bit):
- remove all permission for that key
- set owner to "system"
.=>result when open that key:
"an error preventing this key being opened.
Details: Access is denied." and then i can not change owner back admin any more.
troubleshoot:
i try using psexec to run regedit as system accont:
psexec -i -d -s c:\windows\regedit.exe
and then change owner/ permission back to default but get error: "unable to save permissions on key..access is denied "
I try test same things on windows 7, then using psexec and change owner from "system" back "admin", grant permission successfully
i am not sure this is psexec or win 8.1 problems . some one can help me?. sory for my bad english

Hi HTK91,
This forum is to discuss problems of C# development. Your question is out of our support. I will move your thread to
Where is the forum for forum. As moderators of this forum will help you move to the right forum. Thanks for your understanding.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem running Acrobat.exe from acrobat plugin in IE

hi,
In another discussion, regarding signing pdf in Internet explorer, i am awaiting a reply to a very imp question. In the mean time, asuming that it cannot be done in a standard way, as we have used PDDoc allover the plugin and in IE PDDoc is only accessible in callback methods, i have tried to implement a work around, where i save the PDF to local disk and open it in acrobat.exe.
i do the following:
Register for PDDocDidOpen notification.
In PDDocDidOpen notification i save the AVDoc globally for later use.
then in IdleHandler callback, i use the globally save AVDoc to call PDDocSave() method to save the online pdf to local disk.
and in the PDDocDidSave() callback i use shellexecute to opend acrobat.exe to open the newly saved PDF.
Problem: The shellexecute opens up acrobat.exe showing the newly saved file, but if i click the empty field in the PDF or press any button, acrobat.exe crashes.
I have tried placing shellexecute in differenct callbacks but no success.
here is the shell execute.
ShellExecute(NULL, "open", "C:\\Program Files (x86)\\Adobe\\Acrobat 10.0\\Acrobat\\Acrobat.exe", "d:\\test.pdf", NULL, SW_SHOWNORMAL);
I have opened a different pdf than the newly saved one instead, but still the crash exists.
Do u have any idea what i might be doing wrong.
Jahangir

Thanks for responding G Sch.
LOL. Well this lemming doesn't habitually rename .exe files (e.g. Adobe DNG Converter.exe) to a non-spaced alternative either! (Adobe_DNG_Converter.exe)
Still no luck...
*** Here is my batch file...
REM Copy and DNG-convert files from CF
CD c:\RAW_files
dir c:\RAW_files
"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
dir c:\DNG_files
pause
***Here's the DOS shell output...
<<BEGINS>>
C:\RAW_files>dir c:\RAW_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\RAW_files
12/03/2008 10:29 AM <DIR> .
12/03/2008 10:29 AM <DIR> ..
11/03/2008 07:00 AM 10,661,632 _3110455.ORF
11/03/2008 07:01 AM 10,661,632 _3110457.ORF
11/03/2008 07:01 AM 10,661,632 _3110458.ORF
11/03/2008 07:02 AM 10,661,632 _3110460.ORF
11/03/2008 07:02 AM 10,661,632 _3110461.ORF
11/03/2008 07:03 AM 10,661,632 _3110462.ORF
11/03/2008 07:03 AM 10,661,632 _3110463.ORF
11/03/2008 07:04 AM 10,661,632 _3110464.ORF
11/03/2008 07:04 AM 10,661,632 _3110465.ORF
9 File(s) 95,954,688 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>"C:\Program Files\Adobe\Adobe DNG Converter.exe" -d C:\DNG_files
C:\RAW_files>dir c:\DNG_files
Volume in drive C is Local Disk
Volume Serial Number is D084-58ED
Directory of c:\DNG_files
12/03/2008 02:46 PM <DIR> .
12/03/2008 02:46 PM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 2,619,731,968 bytes free
C:\RAW_files>pause
Press any key to continue . . .
<<ENDS>>
As you can see (a) Source files exist(b) DNG command line runs without generating an error (c) no output files in destination.
DNG Converter did not run.
If I remove everything after the command (i.e. the parameter list stuff) it fires up DNG Converter in interactive mode. Not what I'm after.
Any other thoughts on what the problem is?
Thank you.
Rob

Problem running putty.exe in a seperate thread

Hi All - I have an issue when using a new thread to run an external .exe file (Putty in this case)
When I don't use a new thread Putty will start and stay open and let me do what I need to as normal, however it then hangs the rest of the application so you can't use it until you are finished with Putty - So I thought I would put it in a new thread. I use this method quite a bit in my application and don't have any issues so i'm wondering what I have done wrong here, I call other external .exe files and also start some external Java processes using a new thread and they work OK (using the same method)
It seems to me that the putty process doesn't seem to give any output and so the thread assumes it has closed and shuts down, or I need to inform the thread to wait and send it a message to clean up when I am finished. If I connect to a host and need to add the RSA key to the cache then Putty will stay open in the new thread until I click OK to save the key, then as soon as I have done that it closes
Can anyone point me in the right direction?
Below is some code for working and not working scenarios, the code below has been altered to run from a button click as in my app it's done from a popup menu and I don't think the issue is with the calling function (but I could be wrong)......
Working:
    private void jbtnTestButtonActionPerformed(java.awt.event.ActionEvent evt) {
        try {
            String myPuttyDir;
            File myFile = new File("C:\\Putty\\putty.exe");
            myPuttyDir = myFile.toString();
            String myPuttyArgs = " -ssh [email protected] -pw PASSWD";
            String myProcStart = myPuttyDir + myPuttyArgs;
            Process proc = Runtime.getRuntime().exec(myProcStart);
            BufferedReader bri = new BufferedReader(new InputStreamReader(proc.getInputStream()));
            BufferedReader bre = new BufferedReader(new InputStreamReader(proc.getErrorStream()));
            String line;
            while ((line = bri.readLine()) != null) {
                System.out.println(line);
            bri.close();
            while ((line = bre.readLine()) != null) {
                System.out.println(line);
            bre.close();
            proc.waitFor();
            System.out.println("Putty Closed!");
            catch (Exception ex)
                System.out.println("Exception error :"+ex.getMessage());
                ex.printStackTrace();
       //no issue with this method, putty stays open until I close it and then it prints the closed message and exits cleanly
    }And here is the code with a new thread:
private void jbtnTestButtonActionPerformed(java.awt.event.ActionEvent evt) {
        final Thread t = new Thread() {
            public void run() {
                try {
                   String myPuttyDir;
                    File myFile = new File("C:\\Putty\\putty.exe");
                    myPuttyDir = myFile.toString();
                    String myPuttyArgs = " -ssh [email protected] -pw PASSWD";
                    String myProcStart = myPuttyDir + myPuttyArgs;
                    Process proc = Runtime.getRuntime().exec(myProcStart);
                    BufferedReader bri = new BufferedReader(new InputStreamReader(proc.getInputStream()));
                    BufferedReader bre = new BufferedReader(new InputStreamReader(proc.getErrorStream()));
                    String line;
                    while ((line = bri.readLine()) != null) {
                        System.out.println(line);
                    bri.close();
                    while ((line = bre.readLine()) != null) {
                        System.out.println(line);
                    bre.close();
                    proc.waitFor();
                    System.out.println("Putty Closed!");
                } catch (Exception ex) {
                    System.out.println("Exception error :" + ex.getMessage());
                    ex.printStackTrace();
        t.start();//start the thread
        //This method opens Putty for a second, you just see it, and then it closes
}   Thanks in advance for any help! I'm new to threading in Java having come from a .NET environment and I think I need to listen to the thread somehow but i'm a bit lost......

Hi Gimbal2 - google is my friend (other search engines are available.....) and I have looked at loads of results but none of them gets close to what i'm looking for, nearly all the telnet/ssh libraries don't do interactive window stuff (although I admit I do want the moon on a stick....)
The best I looked at so far is Gritty (seems to be base on JSch terminal) but it just can't handle telnet or ANSI formatting and doesn't do VT100 emulation, although the plain SSH terminal is OK and usable
The rest are SSH/Telnet libraries and I will need to write a terminal emulator and some other stuff to make them do what I need....TBH i'm not good enough a programmer to do that. I just make small apps that make my life at work easier (and also my work mates) i'm not a professional programmer and nothing is for commercial reasons
I use the Reflections .NET control in my old .NET app and it has absolutely everything built in, all functions of Reflections are callable via native code so it makes life so easy - I was hoping for that kind of solution in Java, because basically i'm lazy!! The reason is that the equipment I connect to uses Telnet and SSH but they aren't 'normal' servers as such, I work in 'comms and each vendor has their own language that you need to use over the Telnet/SSH session so I need a plain terminal emulator that handles XTERM/VT100/VT102, ANSI etc. Reflections did this for me and had a great way to send commands in just about any format and then store results etc
Anyway - apologies if i've been spamming the forum with stupid questions, I do try to work through google answers before posting here....
BTW, I tried the google search with SSH terminal and got way more/better results than searching for "Java Telnet" or "Java Terminal Emulator" so am going to have a look at some of those as well, thanks for your help!
Edited by: Matt_C on Oct 25, 2012 6:07 AM

Problem running BCUpdate.exe (boot camp 2.1 update)

Just bought a new iMac 20", upgraded from OSX 10.5.4 to 10.5.6 (plus all other s/w upgrades), ran Boot Camp, made a 50GB Windows NTFS partition, installed Win/XP SP3 from the Windows DVD. Booted into WIndows. So far so good.
Under vanilla Windows, I stuck in the Leopard Install DVD and autoran the Boot Camp drivers install. It crashed half-way through with the blue screen of death (flashed up for only 1 sec), and then the machine automatically rebooted. Now it will no longer boot normally into Windows, it gets halfway and then repeats the crash & reboot scenario over & over.
So, I reinstalled all of Windows (again!), but instead of using the Leopard Install DVD, I tried to run the Boot Camp 2.1 Update package, BCUpdate.exe. However, when I double click on the package in Windows, nothing happens. I right-click -> Open, and it doesn't run. Run as... Administrator, it doesn't run. Safe Mode won't let me run it either. The checksum of the file is correct. I don't get it.
What am I doing wrong???

Hmm, for that to work, I would need hardwired Internet access. All I have is wireless, but Windows doesn't see the Broadcom card, so I can't go the online Apple S/W update route.
So, I'm still stuck. Maybe there's some way I can make an autorun CD or something out of the BCUpdate.exe file...?

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

XI installation - problem when running sapinst.exe

hai,
when i'am running sapinst.exe file i'am getting the following error -
SAPinst is getting started.
Please be patient ...
guiengine: call to bind() for socket 1832 failed. No such file or directory
ERROR      2007-02-28 14:50:20 [iaxxgenimp.cpp:532]
           init()
FGE-00006 Attempt to open a communication port connection failed. Check whether the port 21212 is already in use.
ERROR      2007-02-28 14:50:20
FCO-00034 An error occurred during the installation. Problem: error in GUI server subsystem.
Exit status of child: 1
can anyone help?
bye
nandana

Hi Nandana,
Please check this link...
Re: problems installing NW04 sneak preview (java)
it talks about the same problem as yours...
Thanks.
btw...i got the link from google
Message was edited by:
        Renjith Andrews

T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

Hello,
I was able to reproduce the following problem on a T400.
- unattended installation of WXP-SP3 (slipstreamed)
- reboot
- install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
- reboot
At this point, the video driver is well configured.
- Reboot once or twice, video driver still good.
- Boot the T400 on WinPE 2.0
- Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
- Shutdown the T400, and reboot on C:\
- At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
Then I get an ATI error telling the driver is missing or not well installed.
- When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
(without re-installing the driver ...)
Anyone has an explanation ?
Please not I did not run "sysprep.exe" before capturing with ImageX.exe
stefan

Update on this problem.
After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
After rebooting the T400, the ATI driver was fine.
Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
Stefan

I can download firefox, but when I try to run it, windows 7 asks me to select a program type to run the *.exe file

I am running windows 7 with IE 10. I want to switch to Firefox as my browser. I am able to download the Firefox Setup 22 0 exe, but when I try to open or run it, windows prompts me to "choose the program you want to use to open this file". This happens with both the Firefox Setup Stub 22 0 exe (274kb) and the Firefox Setup 22 0 exec (21,239Kb). I can't find any program on Windows to run this exe. Same thing happens when I try to run the troubleshooter exe.

Hello annsboland
Do you have also problem with others exe files ?
try to create a new user account in Windows 7 and check it again
see if the next articles in the links helps to create the new account:
http://www.bleepingcomputer.com/tutorials/create-new-user-account-in-windows-vista-7/
http://www.pcadvisor.co.uk/how-to/windows/3326039/how-add-new-user-account-in-windows-7/
thank you

Error while running sapccmsr.exe on Netweaver Trial

Hi there,
I've installed Netweaver Trial on my laptop, and I'm trying to run 'sapccmsr.exe -R' from the command to register the CCMS monitoring agent.
It almost works, but then comes up with the following error:
"After entering the RFC logon info for the user, the password
will be stored here on this machine in a Secure Storage.
      client [000]                        :
      user [CSMREG]                      : sap*
      language [EN]                      :
      hostname of NSP message server [localhost] :
      use Load Balancing [n]/y ?         : n
      hostname of application server [localhost] :
      system number (00 - 98) [00]       :
      [optional] route string             :
      trace level    [0]                  :
      please enter password for [NSP:000:sap*]: *******
Try to connect ...
INFO: Updated saprfc.ini in agent work directory C:\saploc\PRFCLOG\sapccmsr
ERROR: Registration failed: Can't get version of NSP. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
EXITING with code 1"
any help much appreciated, I'm a SAP newbie !
TIA.
Stuart.

Hi,
I have exactly the same problem.
sapccmsr -R -j2ee pf=<dir>
      client [000]                        :
      user [CSMREG]                      :
      language [EN]                      :
      hostname of PIT message server :
      use Load Balancing [n]/y ?         :
      hostname of application server :
      system number (00 - 98)      :
      [optional] route string             :
      trace level    [0]                  :
      please enter password for [PIT:000:CSMREG]:
Try to connect ...
INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/<SID>_<SN>/sapccmsr
ERROR: Registration failed: Can't get version of PIT. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
I have tried to register it via visual admin but the same error appeared.
OS: AIX
DB: oracle 10.2.0.4.0
SAP component: PI7 (SAP NetWeaver 2004s)
Any help?
Thanks in advance
Edited by: Jan Hinka on Jul 2, 2009 6:46 PM

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

"Error running javac.exe compiler" when using ant to compile Eclipse plugin

Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target

<target name="compilePlugin">
     
     
     <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
     
     <delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
     <mkdir dir="${param.plugin.dir}/${build.dir}"/>
     
     <javac      srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
               destdir="${param.plugin.dir}/${build.dir}"
               failonerror="${javacFailOnError}"
               verbose="${javacVerbose}"
               debug="${javacDebugInfo}"
               deprecation="${javacDeprecation}"
          optimize="${javacOptimize}"
               source="${javacSource}"
               target="${javacTarget}"
               fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
          <classpath refid="compile.classpath" />
     </javac>
     
     <copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
          <fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
     </copy>
     <jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
     <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
Oceanman

I encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps.

Stop on 0x0000001E while running platform810b_win32.exe

While running platform810b_win32.exe on Win2K SP3 a stop on 0x0000001E in
ntoskrnl with UNHANDLED_EXCEPTION is raised, the blue screen is displayed
and the workstqtion reboots. The blue screen apears after having accepted
the licence conditions.
Kind regards,
Nicolas DUMINIL

You either have a pointer problem or you are calling the 3rd party library in an unexpected fashion.
In terms of testing the most likely reason is that it wasn't tested enough. Moving/changing code modifies the layout in memory which can expose previously hidden pointer problems.

Missing function when running a .exe labview program

Hi
everyone,
I have used
a subvi taken from the RoboIO library ( http://www.roboard.com/labview/Labview_RoBoIOv15b.zip) to make up a program in order to run a
.exe version of it on another computer that doesn’t have Labview (just Run Time Engine
SP1 is installed).
The .exe
works fine on the Labview computer (after adding to the Build/Data directory the
RoboIO.dll, RoboIOv15b, winIo and WInIO.dll files.). I have no conflict message
when opening the Project explorer manager dependancies.
When I
launch the .exe on the second computer I get a message saying it can't find the
function I was talking about at the beginning of my post. (running another .exe without
this function works fine on this second computer)
It’s the
first time I am using a .exe on a "non-labview computer", so I must be doing something
wrong : not creating correctly the .exe program
Would anybody
have an idea what could be the problem?
Thansk a lot,
User

Hi
To deploy an application in a computer that doesn't have LabVIEW you could create an instaler than an exe.
You can find how to create an instaler in the LabVIEW help.
Regards,
Nicolas M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Journées Techniques LabVIEW 2012 : du 27 septembre au 22 novembre
2 sessions en parallèle : Débuter a...

Problem running windows_imagecreator.exe

Similar Messages

Maybe you are looking for