Problem scanning cd cover label to ipod

I have an HP Printer which scans my labels into Abode 7. The transfer to itunes cannot be made.
As I am a real beginner to itunes can anyone give me an idiots guide to allow me to scan labels.
I had to use the add folder as my music was in WMA and was advised this was my best course of action.
Tried to download covers from the web but not all of my albums are in the web page.

Make sure that the covers are saved as a .jpg and not the standard adobe extension. Then save the picture to somehwere like your desktop. Open up iTunes and open the song up so that it shows the box in the corner that usually shows the artwork. Resize iTunes so that that you can see the file and iTunes without having to click on one window or the other. Click and drag the artwork into the box on the bottom left. This should do it. Hope this helps

Similar Messages

How can I remove the back cover for my ipod?

I need to remove the cover because my ipod seems to be suffering from a hardrive problem. It used to just cycle through all the songs in a playlist or randomly play 5 seconds and skip to the next song, but now it just makes a whirring noise when I try to turn it on and cannot get past the apple logo.
Sometimes I get the little unhappy ipod logo and the support website but thats it.
Iv tried going into diagnostic mode and attempting to run a few tests. It failed a USB test in this mode so i think that may be one of the problems with it.
Does anyone know of a fool proof way of removing the case so I can dis/reconnect the harddrive?
Windows XP

Before you remove the back cover of your iPod - which will loss the warranty
Read the following
he Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm

Can't not see cd cover on my ipod!!!

i can't not see the cd cover on my ipod 5, which i purchased the song from iTune Music Store!!
this happened every time when i finish updating my iPod from iTune! and more and more songs' cd covers disappear!!
please give me a hand to solve this problem!!! thank you!

Dude that's not his problem,... there is an option in the preferences(PC) options(mac) where you will find that you have to check a box, to have all the album art updated with the music.

The back cover came off ipod touch 16G. Can it be put back on without sending it back?

Back cover came off Ipod Touch 16G..Can it be put back on without sending it back?

go to this link it helped me and I had the exact same problem http://www.youtube.com/watch?v=HhOX9AG7W_c&feature=related

If you can solve this problem, then you are a true iPod Classic Genius !

So I have talked to every level at Apple's iPod support, and to list all the things they made me do would exceed the size limit of this message board. They even made me send back my original iPod Classic, and I had to wait for almost 1 month to receive my replacement. Here is a summary of my problem, that they (Apple support) have not been able to solve :
- I have a very extensive iTunes collection - over 77,000 songs. All of them were ripped, using iTunes.
- I use the ID tags extensively - i.e. every field is used, and the comments are filled to the maximum allowed characters.
- I am not able, to synch more than ~ 23,300 songs to any of my two 160 Gb iPod classics - therefore, including my exchanged iPod, this issue shows up on three different iPods.
When synching more than 23,300 songs, my iPods are no longer able to play any songs. In the 'About' menu, the iPod shows the wrong number of songs (i.e. 17,300 instead of 24,000) and a huge amount of 'disk space used' is flagged as 'other' (in orange). When clicking on 'Album' or 'Songs', the iPod shows the message 'No songs found'.
When synching less than 23,300, I am able to resolve this issue by restarting the iPods after synching. However, even when synching less than 23,300 titles, the iPods show the wrong number of songs, right after synching, and the huge amount of 'disk space used' for 'other'. Therefore, I have to restart my iPods every time I synch them.
The same problem occurs when using my old Power Book G4 (OS X 10.4.10), and on my new 2.4 GHz MacBook Pro (OS X 10.5.1).
I am using an external HD to hold my music files, which is directly connected to my USB2 port on either Laptop.
I have uninstalled and re-installed iTunes and all the firmware and software is up-to-date.
I have rebuilt my iTunes Library from scratch several times.
I have no problem, playing any of the 77,000+ songs in iTunes.
My assumption is, that there is a size limit for the iTunes library index file on the iPod. Can somebody confirm this theory ?
It seems funny, that the same problem shows up on three different iPods using two different Mac computers.
Does anybody have the same problem ?
Is this an issue that Apple is ignoring ?
Does anybody know, how this can be resolved ?
Thank you very much for your help.!
Message was edited by: Rochelle Renee Christen

Hi There,
I have the exact same problem as you. I'm on my third ipod 160gb. All three have had the freezing and resetting problem. Like you my problems only start once I try to sync more than about 20,000 songs, which is around 90gb.
I have a 140gb music library. If I sync 70gb of my library it works fine. If I wipe that and sync the other 70gb it works fine so I know my mp3 files are okay. If I try to upload the whole library it freezes when I try to select any music.
If I'd only wanted to sync half my music library I'd have bought an 80gb ipod.
I thought firmware 1.1 and itunes 7.6 would solve my problem. No. Exact same problem. I contacted apple support. A genuinely helpful guy advised me to rebuild my music library and change my ipod drive letter. With baited breath I did all this, then restored my ipod to start from a clean slate. I synced my library in 10gb chunks... and it froze up around 90gb just like it always does.
What upsets me is the hours I've spent glued to my PC re-syncing music, searching through forums for answers. I'm absolutley pig sick of it. I never had a minutes trouble with any of my other ipods.
Please, please, please apple investigate this problem, it only happens when these ipods are over half full. Please let us have a firmware update that addresses the bugs us folks are complaining about instead of adding new features we'd be grateful for if only our ipods worked in the first place.

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->

I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

Internet problems on my macbook pro and ipod touch with camera.

Hi,
For the last week or so I have been experiencing internet problems with my macbook and iPod touch with camera. I'll be online and clicking different news articles and suddenly the address bar will start to open a link but will not complete it. So what I do is go up to the signal bar and click turn off airport then turn it back on and that will temporarily solve the problem. Same solution on my iPod, I turn off the wifi and turn it back on. It is very frustrating for both devices. I will include as much info as possible. I have a NetGear RangeMax wireless router model WPN824v3. I was wondering if changing the wireless settings on that would solve my problem. I have the channel on 9. Mode on b and g. Security option on WPA-PSK [TKIP] with password. I would be happy for any help with this issue. Also I hope I'm following correct posting protocol. I haven't been on this forum in a while.

Sig,
Thanks for the advice. I finally tried a solution after doing nothing. LoL. What I did do was change the channel the router was on from 9 to 7. I think I've done something like this in the past when I had slow internet and that worked out well too. I thought that would help and so far so good. Not an interruption so far but we shall see. To the guy or girl who expressed that they had the same problem as me I would try changing the channel of your router like I did. I will monitor the situation and see if it totally solved my problem or not and keep this thread updated. Thanks people

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

Hi sarahdavis0_o,
Welcome to the Apple Support Communities!
If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe

I have a ipod touch and I am trying to update it but it keeps there is a problem dowloading the software for the ipod an internal error has occured what do I do?

I have an ipod touch 4th generation I want to update it but when I do it says there is a problem downloading the softward for the ipod an internal server error occured can someone help me please?

If you are updating via wifi then connect the iPod to your computer and try there. And the other way around too.

I get message, Problem scanning. Something went wrong. Please try again.

My printer was working fine when scanning, but now I get a message:
Problem scanning. Something went wrong. Please try again. I turned my printer off, rebooted my computer...updated the printer from hp website...but nothing. I can see the document in preview, and I hear the scanner working. HELP!!

Hey there @leandermw , Welcome to the HP Forums
I understand you're having scanning problem with your Deskjet 2540, on Windows 8.1 and would like to help you.
I would first suggest that you run the Print and Scan Doctor, and choose "fix scanning" to see if the tool can correct the issue. Send me the results in your reply as well.
If you have the printer connected to a network, either wireless or ethernet, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try scanning.
You can also power reset the printer itself:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Try scanning from the HP scan software on your computer, and also make a copy from the front of the printer.
Write me back with the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photo Transfer Problem From Minox Dcc M3 to Ipod via Camera Connector

Hi,
I have a minox Dcc M3 digital camera,and i recently purchased a 5th generation ipod with the intention of downloading images from my minox camera direct to the ipod, so that i could delete the images from my camera and carry on taking more pictures without having to carry my laptop around with me, The camera only has a 32mb built in flash memory and will not download direct to the ipod via an ipod camera connector,I have tried other cameras that only have built in flash memory and none of them will download direct to the ipod, Has anyone out there come across this problem before,according to apple the ipod supports the following image transfer protocols:- PTP
Type 4 (or Normal)and Mass Storage.Could anyone tell me if there is any firmware update for the ipod or camera that would make the ipod compatible with the cameras flash memory and allow me to download my images to my ipod.

I don`t think there is an option to turn on or off any transfer protocols,on connecting the camera to windows xp it connects staight away and viewing/downloading photos is no problem,it works the same as my other camera no problem.I have followed apples procedure of connecting (ie:-turn on ipod/connect camera connector/turn on camera and connect usb cable) the camera then shuts off immediately,i can turn it on again but all i get from the ipod is the message "ready to connect".It seems to me that the ipod does not even know the camera is connected?,looks like maybe this camera is not compatible with ipod,but i cannot help but think that other camera makes with built in memory would suffer from the problem.

Using VoIP and can not send or receive fax. I am now also having problem scanning

I use VoIP for phone service. I can not send or receive faxes although the Fax Test Report Pass. Now I am having problem scanning. My main concern is with faxing.

Hi,
This won't work for analog fax. You need a normal analog telephone line to fax this way. Please check the following article:
http://hylafax.sourceforge.net/docs/fax-over-voip.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem Scanning Duplex Printed Document

I would appreciate help with the problem described below. Problem: Scanning duplex printed document scans first page Perfectly but second page comes out solid black. OS: Windows 7
Printer: Canon PIXMA MX860
Software App: Canon MP Navigator EX - mx860 series I would appreciate your help in solving this problem.Thank you,
--Dennis--

Thank You for the advice. I called technical help and Jesse spent considerable time and effort to help me solve the problem. The final verdict is that their is a hardware glitch, not software, The nearest Canon repair center is apparently in some place called Lake Forest, CA. I was born and lived all my life in Southern CA and never heard of Lake Forest. It must be in Northern CA so I can't simply take it in to the shop for repairs. Jesse informed me of a consumer loyalty discount available if I should wish to purchase a new printer.

Problem scanning cd cover label to ipod

Similar Messages

Maybe you are looking for