Problem scanning for missing channels

Hi all.
Trying to scan for missing channels, mainly BBC2, and get as far as 72% - 3 mins reamining and the setup freezes.
I did contact Baombay Hight St., yesterday, but could hardly understand to bloke. He did tell me to do a couple of things to the box, but I couldn't make him understand that I am disabled and could n't get to the back of the box. I also tried to explain to him that I didn't know when I was going to see anyone who could help, as I live on my own and vary rarey see anyone who could help.
Any one any solutions?
Thanks.

Hi stokkers,
Does you STB freeze completely ? No response to remote control ?
A quick suggestion would be to try it again without the network cable connected.
Let us know if it helps.

Similar Messages

GX700 Crashes when scanning for TV channels!

Hi forum.
I've got a GX700 with TV-tuner. Everything else on the PC is working like a charm, but when scanning for TV-channels in DVBViewer Pro and CyberLink PowerCinema, the PC simply crashes, and a nice blue-screen error message appears. The Scanning always make it to 98 %, without finding a single channel, and then the crash occurs. I'm using Vista 64-bit.

Quote
and a nice blue-screen error message appears.
And says what? >>> Getting help with random restarts and Blue Screens <<<

Scan for new channels

Needing to do a scan for new channels because the programme guide was not working properly, I navigated through the menu system, and eventually arrived at a screen which gave me WRITTEN directions to get to the right place. Which left me thinking: Why not just provide the option to scan? Is not the purpose of a menu system to avoid giving written lists of options to choose? Surely something dysfunctional here?

Yes that is the normal route, but my point is more nuanced than that. The role of a menu system is, or should be, about providing a route to the actual operation needed, not about providing a route to a text document giving a description of a route within the same menu system. Geddit? Oh never mind.

Credit for Missing Channels

I am highly upset and I just spoke with a supervisor by the name of Braxton {edited for privacy}. I have not received over 100 channels since my account has been set up in april or may of 2014. I work full time, a business owner, full time student and a mother. I do not have time to go through 200 channels to make sure each channel is working. I noticed one channel said unavailable; bt this was the first time I ever had Verizon, so I was like ok no big deal. A month or so later I noticed the same channel stated unavailable, this is a channel I am subscribed to in my package. In October, I had sum time and went through all the channels I was supposed to have and noticed I did not have over 100 channels n which I called to report the situation. As of yesterday I had trouble shooting done again in which my box was reset 3 xs again. The tech agent (Braxton stated he could not give me the rep's name) stated this was a verizon issue and they would send an agent immediatedly to my home. He also mentioned for me to contact customer service and I would get a partial credit back from when I had service installed and also free premium channels. The technician came over today switch the box and it stil was not giving me channels then he switched out the main verizon box in my shed. He stated my box installed was a bad box. I called back to customer service, the customer service rep stated they could give me free HBO for a year which I am grateful for and then when I mentioned the credit as mentioned to me from the tech rep, the agent mentioned they could only do a partial for 3 months. I asked for the supervisor and he said they can only do three months. This is rediculous if I was not able to receive all the channels I have been paying for all these months. I was told that I could get a partial credit from when my service was installed because Verizon installed a bad cable box which should have been checked before the inital technician left. This is not my fault and I have no reason to lie about this situation. I would like the amount of credit that I am due. I have been on the phone with customer service/tech support approx. 6 hours or more due to this situation which is taking time and money away from me and my family. I will also be writing to Verizon Communications. How would you feel if you are paying hundrends of dollars for service you haven't received?

Hi jcabble00,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

I can't get BT Vision to scan for channels

Yesterday out BT Vision box stopped working for no apparent reason. After checking several channels and the settings I did what I usually do at times like this and reset the system.
When it came to setting it up again I went through all the options but when it got to "Scan for Channels" it never got past '0% Complete'. I waited a LONG time but it still never got past '0% Completed'. I tried to go from the beginning but I still hit the same problem.
Since then I've tested every cable I can but still no luck. We rescently got BT Infinity so there's a cable running from the BT Vision to the homehub that I'm unable to check but that's it. I can watch things using just the television so I don't see how it can have anything to do with the arial.
PLEASE HELP! I'm all out of ideas

I take it you mean you did a factory reset?
Might be worth trying again.
Thinking..... Remove Ethernet cable from the vision box and try rebooting
Thinking remove aerial from box and try rebooting.
Last switch off everything including the Openreach modem.
If you've done all that and its still stuck then your box may well have a terminal problem.
If you get to this stage and can get no further then either a phone call to report the problem may resolve the issue and you can tell them you have done all possible tests
Or
Drop the Mods am email (link below)
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Scan for channels frozen

My box (latest version, 3 weeks old) was fine upto about 6pm. It decided to update itself, don't know why, and it won't get past the Scan for Channels page, gets stuck at 0%. I've done everything. Switched off/on, rebooted, powered down, held ok and down arrow, all that stuff. Doesn't move from 0%. Tried with aerial cable in and out. Any advice before I make the dreaded call to the "help" desk?
Solved!
Go to Solution.

We were watching catch up on Sat evening when the vision box took a turn and froze resulting in no freeview channels. I then went through all procedures to re scan them but still kept getting 0% complete. After total frustration I rang the helpline Monday am what a mistake After 2 hours on the phone to New Delhi 0800 number thank goodness I was still no further than when I 1st dialled having spoken to 4 different people with an approx 20 min wait for each. They could not explain clearly what we had to do as the English was so poor we could not understand them they also seemed unable to realise that our landline is not near the TV. Having given my mobile number I managed to get an answerphone message to say they could not contact me fantastic!! Thank goodness for the comments on the forum how to rectify this problem press the left & bottom arrows on the front of the vision box and disconnect at the back of the box keep pressing buttons when reconnecting and hurrah!!!!!!!!! It worked and I managed to scan in the channels now back working again Please BT sort out your technical helpline.

"The upload has failed. There was a problem running a virus scan for the file." any ideas???

"The upload has failed.
There was a problem running a virus scan for the file. "
This is the message i get when tryng to update
any ideas?

Error: "svr.VirusScanExecutionError"
An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
The solution is to update the article again. Trying again typically routes you to a different host in the server array.

HT1473 I am having to recreate my itunes library and do not understand why prior album artwork appeared in my older library but not the new library? Is there some way to scan itunes for missing album artwork?

I am having to recreate my itunes library and do not understand why prior album artwork appeared in my older library but not the new library? Is there some way to scan itunes for missing album artwork?

do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN

TS1398 iphone2 can not scan for my wireless network; i tried all troubleshoots but still same problem. Can anyone help?

iPhone2 can not scan for my wireless network; i tried all troubleshoots but still same problem. Can anyone help?

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

TS1398 'could not scan for wireless networks' problem

I keep getting 'could not scan for wireless networks' whenever I try to connect. I have turned wi-fi off/on, restarted my network, iPod touch, and the home modem. What are some other options for fixing this problem?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod

50L2200U toshiba tv scanning for channels

I followed the directions to scan for channels, and when I pressed the installation button, instead of bringing me to a screen that says "terrestrial" - it takes me to a screen that has a customer service number to call. My toshiba is no longer under warranty, so they won't help me without me paying. Does anyone know how to scan for channels- is it normal to have a screen with a phone number come up? What can I do? Thanks It is a fairly new tv- 2012-2013.

Hi cd-smiley,
It does sound like you have had a bit of a nightmare with your Vision service. I would like to take a look at this for you. Please could you drop me an email with your BT account details and a link to this thread?
My email address can be found by clicking on my profile.
Thanks
Paddy,
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

New 7.01 Problem: iTunes locking up while scanning for "playback gaps."

Anybody have any ideas on how to fix this? When I open iTunes, it immediately begins scanning for "playback gaps" and locks up after maybe 20-30 songs...and it does not consistently lock up on any one song it is scanning.
This is most frustrating: the 7.01 upgrade has rendered iTunes non-functional.
Any help would be appreciated.

I USED to be able to get a playlist or two, I had gotten 5 GB of music back on it by putting 1-2 playlists on, ejecting, plugging back in, rinse, repeat. Now iTunes locked up AGAIN, checked the iPod, NO MUSIC. Really glad I bought this ******* piece of **** two years ago! Totally worth my money!
Now, on top of all this, I find this in the help section.
Symptoms
You may notice the following symptoms on your Windows PC after installing the iCloud Control Panel, iTunes 10.5 or later, or Safari 5.1 or later:
Apple software on Windows: May see performance issues and blank iTunes Store
iTunes is slow to respond.
Windows is slow to respond.
iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
Oh, so you mean that since you guys released 10.5, (and its now up to 10.6.??) people have had this issue of their iTunes not responding? What the ****. So basically since 10.5 people have had their iTunes not working correctly? Fix this crap.
I already did the LSP check thing, only one besides the apple one are two windows ones that are up to date and should be there. There is no other help to be had. What a joke.

ClamAV fails to scan for viruses in emails [CLAWS MAIL]

I've recently switched from Thunderbird to Claws Mail and ran into one small, but annoying, problem.
I want to use ClamAV + the clamav extension for claws mail to scan for viruses, however it does seem to have permission problems.
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Here's my clamd.conf:
## Please read the clamd.conf(5) manual before editing this file.
# Comment or remove the line below.
#Example
# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
LogFile /var/log/clamav/clamd.log
# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: no
#LogFileUnlock yes
# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M
# Log time with each message.
# Default: no
LogTime yes
# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: no
#LogClean yes
# Use system logger (can work together with LogFile).
# Default: no
#LogSyslog yes
# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL
# Enable verbose logging.
# Default: no
#LogVerbose yes
# Log additional information about the infected file, such as its
# size and hash, together with the virus name.
#ExtendedDetectionInfo yes
# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
PidFile /run/clamav/clamd.pid
# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
TemporaryDirectory /tmp
# Path to the database directory.
# Default: hardcoded (depends on installation options)
DatabaseDirectory /var/lib/clamav
# Only load the official signatures published by the ClamAV project.
# Default: no
OfficialDatabaseOnly yes
# The daemon can work in local mode, network mode or both.
# Due to security reasons we recommend the local mode.
# Path to a local socket file the daemon will listen on.
# Default: disabled (must be specified by a user)
LocalSocket /var/lib/clamav/clamd.sock
# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
LocalSocketGroup clamav
# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660
# Remove stale socket after unclean shutdown.
# Default: yes
#FixStaleSocket yes
# TCP port address.
# Default: no
#TCPSocket 3310
# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
# Default: no
#TCPAddr 127.0.0.1
# Maximum length the queue of pending connections may grow to.
# Default: 200
#MaxConnectionQueueLength 30
# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.
# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximum attachment size.
# Default: 25M
#StreamMaxLength 10M
# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000
# Maximum number of threads running at the same time.
# Default: 10
#MaxThreads 20
# Waiting for data from a client socket will timeout after this time (seconds).
# Default: 120
#ReadTimeout 300
# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5
# This option specifies how long to wait (in miliseconds) if the send buffer is full.
# Keep this value low to prevent clamd hanging
# Default: 500
#SendBufTimeout 200
# Maximum number of queued items (including those being processed by MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if possible.
# WARNING: you shouldn't increase this too much to avoid running out of file descriptors,
# the following condition should hold:
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
# Default: 100
#MaxQueue 200
# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60
# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/
# Maximum depth directories are scanned at.
# Default: 15
#MaxDirectoryRecursion 20
# Follow directory symlinks.
# Default: no
#FollowDirectorySymlinks yes
# Follow regular file symlinks.
# Default: no
#FollowFileSymlinks yes
# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes
# Perform a database check.
# Default: 600 (10 min)
#SelfCheck 600
# Execute a command when virus is found. In the command string %v will
# be replaced with the virus name.
# Default: no
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
# Run as another user (clamd must be started by root for this option to work)
# Default: don't drop privileges
User clamav
# Initialize supplementary group access (clamd must be started by root).
# Default: no
#AllowSupplementaryGroups no
# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM yes
# Don't fork into background.
# Default: no
#Foreground yes
# Enable debug messages in libclamav.
# Default: no
#Debug yes
# Do not remove temporary files (for debug purposes).
# Default: no
#LeaveTemporaryFiles yes
# Detect Possibly Unwanted Applications.
# Default: no
#DetectPUA yes
# Exclude a specific PUA category. This directive can be used multiple times.
# See http://www.clamav.net/support/pua for the complete list of PUA
# categories.
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool
# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT
# In some cases (eg. complex malware, exploits in graphic files, and others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes
#AlgorithmicDetection yes
## Executable files
# PE stands for Portable Executable - it's an executable file format used
# in all 32 and 64-bit versions of Windows operating systems. This option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite. If you turn off this option, the original files will still be
# scanned, but without additional processing.
# Default: yes
#ScanPE yes
# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanELF yes
# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable.
# Default: no
#DetectBrokenExecutables yes
## Documents
# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanOLE2 yes
# With this option enabled OLE2 files with VBA macros, which were not
# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
# Default: no
#OLE2BlockMacros no
# This option enables scanning within PDF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
#ScanPDF yes
## Mail files
# Enable internal e-mail scanner.
# If you turn off this option, the original files will still be scanned, but
# without parsing individual messages/attachments.
# Default: yes
#ScanMail yes
# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
# Never use it on loaded servers.
# Default: no
#ScanPartialMessages yes
# With this option enabled ClamAV will try to detect phishing attempts by using
# signatures.
# Default: yes
#PhishingSignatures yes
# Scan URLs found in mails for phishing attempts using heuristics.
# Default: yes
#PhishingScanURLs yes
# Always block SSL mismatches in URLs, even if the URL isn't in the database.
# This can lead to false positives.
# Default: no
#PhishingAlwaysBlockSSLMismatch no
# Always block cloaked URLs, even if URL isn't in database.
# This can lead to false positives.
# Default: no
#PhishingAlwaysBlockCloak no
# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first,
# the scan is interrupted immediately, regardless of this config option.
# Default: no
#HeuristicScanPrecedence yes
## Data Loss Prevention (DLP)
# Enable the DLP module
# Default: No
#StructuredDataDetection yes
# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect.
# Default: 3
#StructuredMinCreditCardCount 5
# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect.
# Default: 3
#StructuredMinSSNCount 5
# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes
# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz
# Default: no
#StructuredSSNFormatStripped yes
## HTML
# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: yes
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
#ScanHTML yes
## Archives
# ClamAV can scan within archives and compressed files.
# If you turn off this option, the original files will still be scanned, but
# without unpacking and additional processing.
# Default: yes
#ScanArchive yes
# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
#ArchiveBlockEncrypted no
## Limits
# The options below protect your system against Denial of Service attacks
# using archive bombs.
# This option sets the maximum amount of data to be scanned for each input file.
# Archives and other containers are recursively extracted and scanned up to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 100M
#MaxScanSize 150M
# Files larger than this limit won't be scanned. Affects the input file itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container).
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 25M
#MaxFileSize 30M
# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deeply the process should be continued.
# Note: setting this limit too high may result in severe damage to the system.
# Default: 16
#MaxRecursion 10
# Number of files to be scanned within an archive, a document, or any other
# container file.
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10000
#MaxFiles 15000
## Clamuko settings
# Enable Clamuko. Dazuko must be configured and running. Clamuko supports
# both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
# is the preferred option. For more information please visit www.dazuko.org
# Default: no
#ClamukoScanOnAccess yes
# The number of scanner threads that will be started (DazukoFS only).
# Having multiple scanner threads allows Clamuko to serve multiple
# processes simultaneously. This is particularly beneficial on SMP machines.
# Default: 3
#ClamukoScannerCount 3
# Don't scan files larger than ClamukoMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#ClamukoMaxFileSize 10M
# Set access mask for Clamuko (Dazuko only).
# Default: no
#ClamukoScanOnOpen yes
#ClamukoScanOnClose yes
#ClamukoScanOnExec yes
# Set the include paths (all files inside them will be scanned). You can have
# multiple ClamukoIncludePath directives but each directory must be added
# in a seperate line. (Dazuko only)
# Default: disabled
#ClamukoIncludePath /home
#ClamukoIncludePath /students
# Set the exclude paths. All subdirectories are also excluded. (Dazuko only)
# Default: disabled
#ClamukoExcludePath /home/bofh
# With this option you can whitelist specific UIDs. Processes with these UIDs
# will be able to access all files.
# This option can be used multiple times (one per line).
# Default: disabled
#ClamukoExcludeUID 0
# With this option enabled ClamAV will load bytecode from the database.
# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
# Default: yes
#Bytecode yes
# Set bytecode security level.
# Possible values:
# None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
# This value is only available if clamav was built with --enable-debug!
# TrustSigned - trust bytecode loaded from signed .c[lv]d files,
# insert runtime safety checks for bytecode loaded from other sources
# Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
# Note that by default only signed bytecode is loaded, currently you can only
# load unsigned bytecode in --enable-debug mode.
# Default: TrustSigned
#BytecodeSecurity TrustSigned
# Set bytecode timeout in miliseconds.
# Default: 5000
# BytecodeTimeout 1000
My freshclam.conf:
## Please read the freshclam.conf(5) manual before editing this file.
# Comment or remove the line below.
#Example
# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav
# Path to the log file (make sure it has proper permissions)
# Default: disabled
UpdateLogFile /var/log/clamav/freshclam.log
# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M
# Log time with each message.
# Default: no
#LogTime yes
# Enable verbose logging.
# Default: no
#LogVerbose yes
# Use system logger (can work together with UpdateLogFile).
# Default: no
#LogSyslog yes
# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL
# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid
# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
#DatabaseOwner clamav
# Initialize supplementary group access (freshclam must be started by root).
# Default: no
#AllowSupplementaryGroups yes
# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# WARNING: Do not touch it unless you're configuring freshclam to use your
# own database verification domain.
# Default: current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net
# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
# You can use db.XY.ipv6.clamav.net for IPv6 connections.
#DatabaseMirror db.XY.clamav.net
# database.clamav.net is a round-robin record which points to our most
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror database.clamav.net
# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5
# With this option you can control scripted updates. It's highly recommended
# to keep it enabled.
# Default: yes
#ScriptedUpdates yes
# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression;
# the change will take effect with the next database update.
# Default: no
#CompressLocalDatabase no
# With this option you can provide custom sources (http:// or file://) for
# database files. This option can be used multiple times.
# Default: no custom URLs
#DatabaseCustomURL http://myserver.com/mysigs.ndb
#DatabaseCustomURL file:///mnt/nfs/local.hdb
# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24
# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass
# If your servers are behind a firewall/proxy which applies User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: clamav/version_number
#HTTPUserAgent SomeUserAgentIdString
# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd
# Send the RELOAD command to clamd.
# Default: no
NotifyClamd /etc/clamav/clamd.conf
# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command
# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command
# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command
# Don't fork into background.
# Default: no
#Foreground yes
# Enable debug messages in libclamav.
# Default: no
#Debug yes
# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 60
# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 60
# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases yes
# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# Freshclam will connect to clamd in order to get recent statistics.
# Default: no
#SubmitDetectionStats /path/to/clamd.conf
# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code
# This option enables support for our "Personal Statistics" service.
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/support/faq/faq-cctts/
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id
# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
# and http://safebrowsing.clamav.net for more information.
# Default: disabled
#SafeBrowsing yes
# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: enabled
#Bytecode yes
# Download an additional 3rd party signature database distributed through
# the ClamAV mirrors. Here you can find a list of available databases:
# http://www.clamav.net/download/cvd/3rdparty
# This option can be used multiple times.
#ExtraDatabase dbname1
#ExtraDatabase dbname2
Any help is much appreciated.

MatejLach wrote:
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Seems like a permissions error to me... maybe check the actual file it is attempting to scan... I know it is in your home folder, but just to be sure, you might want to check that everything is sane.

I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help?

I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help? (I tried deleting itunes and re-installing it but apparently itunes was still on my computer so it asked me if I wanted to just check and see if there were any issues or missing software, so I did that but i still had the same problem.)

Hi jbserious,
Welcome to the Support Communities!
It doesn't sound like the iTunes software and its components installed completely. The article below will walk you through some troubleshooting steps. Is this your first time using iTunes, or do you have an iTunes library from another computer that you want to move to this one?
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Adding music and other content to iTunes
http://support.apple.com/kb/HT1473
Cheers,
- Judy

Scanning for additional file extensions

Hi
We have a requirement to scan and report back PCs which have database files on the local drives, and I am struggling to configure ZCM Inventory to scan for files with the mdb extension. I have checked the product documentation and do not seem to have missed anything
In the Device Inventory settings section on the Configuration page I have "collect software file information" ticked on all the inventory scan types.
In the "software files" section I have "Collect .exe files" ticked, and have placed mdb in the additional extensions field. I also have all three (system, ancillary, other) file catagories ticked.
The inventory reports back all the exe files it can see on the test system I am running the inventory against (and yes I do have some .mdb files on there), but does not report back any mdb files.
Is there something I am missing in order for this to work?
Thanks
Gary

gazza,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem scanning for missing channels

Similar Messages

Maybe you are looking for