Problem scanning from HP 1312 MFP connected via USB to Time Capsule

Hi,
I have a HP Color Laserjet 1312 MFP connected via USB to a Time Capsule. I can print through the Time Capsule without any problems but the HP Director software can't see the device hence I can't use the scanner on the device.
Please help!

If the scanning option is vital, just keep the MFP directly plugged into your Mac (via USB). Enable printer sharing via System Preferences. Note that the Mac does need to be on for the other machines on your network to print. If that's not an option, look into purchasing a USB print server to connect via ethernet onto your network.
Here is one:
http://www.linksys.com/servlet/Satellite?c=LProductC1&childpagename=US%2FLayout&cid=1115416942657&pagename=Linksys%2FCommon%2FVisit orWrapper&lid=4265722279L07

Similar Messages

  • External usb drive doesn't appear correctly connected via usb to Time Capsule

    After using it successfully for months over my home LAN by connecting it via FW800 (and suing filesharing) to a stationary MacBook Pro, I'm attempting to connect a 2 TB Hitachi Deskstar 7K2000 hard drive (in a Rosewill quad-interface enclosure with Oxford semiconductor bridge chip) via USB cable to my third-generation Time Capsule. It is formatted as HFS+ with a GUID partition table.
    It appears in Airport Utility and mounts correctly, but none of its folders appears. Have tried two different USB cables with the same results.
    Any ideas as to what could be wrong?

    So do I. I have a 350 GB Maxtor One Touch external harddrive. When I boot the mac, the drive doesn't show. And if I run the AirPort Disk Utility, it shows by name. But no matter what settings I chose, it doesn't mount and it says "No Disk Found" in the menu.
    But here comes the interesting bit: If I turn off the harddrive, and turn it back on again, AirPort Disk Utility finds it. So I think the problem has to do with the harddrive spinning down and going into sleep-mode. For some reason it seems to become invisible to the Extreme-box when doing so. But if that's correct, what the heck do I do about it?

  • Non riesco a stampare, nella partizione Windows dell'IMAC, con la stampante collegata via USB alla Time Capsule. Ho installato Bonjour, vedo la stampante ma non riesco a stampare. Soluzioni?

    Non riesco a stampare, nella partizione Windows dell'IMAC, con la stampante collegata via USB alla Time Capsule. Ho installato Bonjour, vedo la stampante ma non riesco a stampare. Soluzioni?

    Hi @Dige85 ,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Thank you for your understanding
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • OSX 10.5.4 printing to HP Deskjet via USB on Time Capsule

    Mac has a problem printing to a Deskjet 6122 connected USB to a Time Capsule. The Time Capsule is set up as a LAN wireless access point to the ISP.
    Wireless clients are:
    1. Macbook with Leopard OSX V10.5.4. All OSX updates were applied Dec 5, 2008 in the shop when the Mac got a new HDD and the Leopard upgrade.
    2. A Windows Vista box (Time Capsule runs 802.11g because of the wireless adapter in this box).
    Printers on the LAN are:
    1. HP Deskjet 6122 connected to the USB port on the Time Capsule, and
    2. HP Laserjet 1022NW connected Ethernet to the Time Capsule.
    Printer sharing is OFF for both printers/clients
    Addition of both printers to the Mac was normal. +*But when printing multiple page documents to the Deskjet 6122, the Mac only prints one page*+ (the last one) without error message of any kind. The Mac’s driver version for this printer is 3.3.3. I deleted the printer from the Mac and re-added it – same problem. I followed the procedure in “Printer Troubleshooting for Airport Base Stations and Time Capsule” – same problem.
    The Mac prints all pages of multiple page documents to the Laserjet 1022. The Windows box prints all pages of multiple page documents to both printers.
    Any ideas?

    Thanks Greg.
    I don't want to hijack RetP3Pilot's thread, but I may be having a similar issue.
    I've recently been experiencing a "connection failure" error when trying to print to my HP Deskjet 950 connected to a Time Capsule via Bonjour. I tried your suggestion of using the latest Gutenprint driver and adding the printer via IP Address. It appears to connect but anything I send to it stalls at 24% and there is no visible activity going on with the printer. ANy suggestions are welcome.
    Again, sorry to hijack the thread. Let me know if you'd rather I start a new one.

  • Cannot print with HP Laserjet 1022 when connected with USB to Time Capsule

    Installed HP drivers
    Connected HP 1022 (not the network printer) with USB to Time Capsule
    Printer appears in "Standard" section of printers, marked with Bonjour
    Correct driver is selected
    When printing, printer appears to be connected. Printer queue shows the item being managed and no errors are posted. After a rather long time, the print disappears into the void. This goes for the test page too.
    Connected the printer directly to my iMac with USB, no problems at all.
    I would prefer to have it connected to the Time Capsule though...
    Bjarne Havnen

    Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
    I have no experience with Linux, sorry.
    Michael

  • é possível conectar internet via usb no time capsule?

    tenho um modem usb da prestadora oi, quero conecta-lo no meu time capsule, mas nao estou conseguindo, alguem sabe de alguma dica?

    This may be a printer driver issue. I recommended first connect printer directly to computer and check for Software Updates, this will tell you if you have any printer updates.
    If you are using a Mac computer follow troubleshooting steps in HT3500
    (Basically, navigate to Print & Scan in System Preferences and right-click or control-click on printer from left and choose Reset Printing System, then re-add preferred printer.)
    If you are using a Windows computer download and install Bonjour Print Services DL999

  • External HDD (via USB) to Time Capsule as Media Server?

    I bought a 3TB Seagate Backup Plus i will like to link to my 3TB Time Capsule as a media Server... anything I must do in particular?

    Make sure it is Mac formatted.. HFS+
    Other than that.. expect low slow speeds.. when the computer can find the TC at all.

  • My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

    My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.  I get an error message with multiple suggestions but none of them apply to my situation.
    I am so dissatisfied with this printer.  I'm sorry I got it from Amazon because now it is a hassle to return it.  I will never buy another Canon.
    The printer menus are confusing.  I hate using it.  I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model.  Never again.  Stick with cameras.
    Marcy Hotz

    This note won't be as angry and frustrated as the last one...
    Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer.  I deleted all the old stuff.
    I also had several scanning applications on my drive which just confused me.
    When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which).  So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
    It works now.  So I'm satisfied, will keep this maching.  I just had to take some time, sit down and focus on the problem.

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • Iphone 4S updated to iOS 5.0.1 last nite no longer visible in iTunes for wireless sync.  check box is viewable as checked when connected via usb. anyone else having this problem and been able to sort? Thanks.

    Hi all.  Update my iphone 4S via usb last night.  Since then the iphone is not visible in itunes for wireless syncing.  The sync wirelessly box is checked and is viewable as checked when phone connected via usb.  Anyone else have this problem and been able to sort?  Thanks.  Doug

    Hi all.  Update my iphone 4S via usb last night.  Since then the iphone is not visible in itunes for wireless syncing.  The sync wirelessly box is checked and is viewable as checked when phone connected via usb.  Anyone else have this problem and been able to sort?  Thanks.  Doug

  • HT201250 I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please hel

    I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please help

    See Pondini's Excellent information here...
    Setting-up a new Mac from an old one, its backups, or a PC
    See the  Second Chance to Use Setup Assistant  here...
    http://Pondini.org/OSX/SetupLion.html

  • Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

    Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • When iPhone 5s is connected via USB no audio is heard

    Hi There -
    I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
    When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
    Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
    I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
    I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
    One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
    Help is greatly appreciated!!!

    I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
    10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

  • Install Arch on hard disk connected via USB

    Hi,
    anyone tried this?
    I had Arch Linux installed on hdd in my desktop, now I've connected this hdd to laptop via USB and I want to start system from it. I need to reinstall lilo, because I get kernel panic after booting from USB.
    I don't know how to do this, I boot laptop from Archie Live CD and:
    mount /dev/sda2 /mnt/m
    chroot /mnt/m
    editing /etc/lilo.conf
    lilo
    and I get error: Failed stat("/dev/dsa2")
    Anyone know how to install lilo on hdd connected via USB?
    thanks for any help

    i know it's an old thread, but perhaps it'll help someone else later...
    i first tried installing from cd, with some problems, using an arch 0.7 cd.
    then i tried it with a newer one (arch 0.7.1) which did'nt recognize the external harddisk and my network device...
    so i tried a ftp install from 0.7 cd - without problems.
    then after trying to boot i got also this kernel panic, because the usb drive wasn't accessible like this.
    with following steps i got it running:
    boot from live cd (e.g. archie)
    create a folder in /mnt/
    mount usb drives partition with the installation there
    chroot to mounted folder
    edit /etc/mkinitrd.conf
    configure it (usb,scsi,ide), there are useful comments in the file...
    save it and run mkinitrd -auto
    then edit and save /etc/lilo.conf as described in the wiki: http://wiki.archlinux.org/index.php/Initrd
    installing lilo from the chrooted system doesn't work. so do this:
    type exit (to leave chroot)
    cd /
    mv /etc/ /etcold/
    mv /boot/ /bootold/
    ln -s /mnt/yourmountfolder/boot
    ln -s /mnt/yourmountfolder/etc
    lilo
    (if there's an other, easyer way to install lilo, let me know)
    and then reboot...

Maybe you are looking for