Problem Seeding/Creating Database Copy

Good Morning,
     I am getting the following error when trying to create a DB copy in our DR site. I have tried to delete and recreate, also dismounted the active and retried. Nothing seems to work. There aren't any specific errors in the event logs.
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:05
DB-03
Failed
Error:
A source-side operation failed. Error An error occurred while performing the seed operation. Error: An error occurred while communicating with server 'servername'. Error: No connection could be made because the target machine actively refused it IP address:Port
Number. [Database: DB-03, Server: servername.domain.com]
An error occurred while communicating with server 'servername'. Error: No connection could be made because the target machine actively refused it IP address:Port Number
No connection could be made because the target machine actively refused it
Click here for help...URL LINK HAS NOTHING ON IT
Exchange Management Shell command attempted:
update-MailboxDatabaseCopy -Identity DB-03\Servername' -SourceServer 'Servername' -Network 'DAGname\Network' -DeleteExistingFiles
Elapsed Time: 00:00:05

Hi,
Check whether the Port 64327 is opened. Disabled TCP, RSS and NETDMA to see if it helps.
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

  • Problem when creating Database (Database, OS and hardware Configuraiton included)

    Problem when creating Database:
    Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
    There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
    Problem # 1:
    When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
    I searched following oracle help for this problem.
    ORA-03113: end-of-file on communication channel
    Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
    Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Problem # 2:
    When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
    I searched following oracle help for this problem.
    ORA-12571: TNS:packet writer failure
    Cause: An error occurred during a data send.
    Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Log File Showing Error :
    Result code for launching of configuration tool is 0
    Launched configuration tool Oracle Database Configuration Assistant
    Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
    Invalid Exit Code. The following result code will be used for configuration tool: 1
    Configuration tool Oracle Database Configuration Assistant failed
    The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
    An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
    Log File of Installation:
    The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
    I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
    Software & Hardware Configuration are as follow:
    Software:
    Database
    Oracle 8.1.7.0.0 (Oracle8i)
    Operating System
    Microsoft Windows 2000
    5.00.2195
    Service Pack 2
    Hardware:
    x86 Family 6 Model 8 stepping
    10
    AT/AT COMPITABLE
    260,400 KB RAM

    Dont't worry about that. Before you
    create a table(or view), it is wise to
    drop the table(or view) with the same name.
    If the name doesn't exist, of course there
    is an error message. See the following script:
    -------------------begin-----------
    drop table students cascade constraints;
    create table students (
    sid varchar2(5),
    fname varchar2(20),
    lname varchar2(20) not null,
    minit char,
    primary key (sid));
    --------------end-----------------
    Good day!
    null

  • Problem when creating Database with Database, OS and hardware Configuraiton

    Problem when creating Database:
    There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
    Problem # 1:
    When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
    I searched following oracle help for this problem.
    ORA-03113: end-of-file on communication channel
    Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
    Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Problem # 2:
    When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
    I searched following oracle help for this problem.
    ORA-12571: TNS:packet writer failure
    Cause: An error occurred during a data send.
    Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Software & Hardware Configuration are as follow:
    Software:
    Database
    Oracle 8.1.7.0.0 (Oracle8i)
    Operating System
    Microsoft Windows 2000
    5.00.2195
    Service Pack 2
    Hardware:
    x86 Family 6 Model 8 stepping
    10
    AT/AT COMPITABLE
    260,400 KB RAM

    user563502 wrote:
    I am working on Solaris 8. What is Alert_SID.log? where can I find it?
    ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
    to be honest with you, this is not your work.

  • Problem when creating Database (Database, OS and hardware Configuraiton)

    Problem when creating Database:
    There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
    Problem # 1:
    When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
    I searched following oracle help for this problem.
    ORA-03113: end-of-file on communication channel
    Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
    Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Problem # 2:
    When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
    I searched following oracle help for this problem.
    ORA-12571: TNS:packet writer failure
    Cause: An error occurred during a data send.
    Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Software & Hardware Configuration are as follow:
    Software:
    Database
    Oracle 8.1.7.0.0 (Oracle8i)
    Operating System
    Microsoft Windows 2000
    5.00.2195
    Service Pack 2
    Hardware:
    x86 Family 6 Model 8 stepping
    10
    AT/AT COMPITABLE
    260,400 KB RAM

    user563502 wrote:
    I am working on Solaris 8. What is Alert_SID.log? where can I find it?
    ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
    to be honest with you, this is not your work.

  • Problem while Creating Database in 10g

    Its very urgent.. Please Help..!!
    After installing 10g (Standard Edition) on Windows 2000 Server, I started creating database through Database Configuration Assistant.
    Instead of Oracle Home path, different path is specified for Database files.
    In 'Step 11 of 12' of the 'Database Configuration Assistant' I specified the 4 new table spaces to create with respective memory sizes.
    In 'Step 12' I selected 'Create a Database' and clicked 'Finish' button.
    After 7% of the Database creation progress bar, it is giving the following error:
    "ORA: 01092 ORACLE instance terminated. Disconnection forced"
    And asking for Abort..
    What could be the problem. Is it problem with installation or any other services to be started.
    After 10g installation I restarted my system.
    If required I'll provide some more information.
    Its very urgent...
    Thanks & Regards

    hi satish,
    this is not the right forum for database questions. please use the following (database) forums:
    http://forums.oracle.com/forums/index.jsp?cat=18
    regards,
    christian

  • Problem when creating Database:

    There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
    Problem # 1:
    When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
    I searched following oracle help for this problem.
    ORA-03113: end-of-file on communication channel
    Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
    Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
    Problem # 2:
    When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
    I searched following oracle help for this problem.
    ORA-12571: TNS:packet writer failure
    Cause: An error occurred during a data send.
    Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
    Conclusion:
    What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.

    user563502 wrote:
    I am working on Solaris 8. What is Alert_SID.log? where can I find it?
    ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
    to be honest with you, this is not your work.

  • Oracle 8iEE problem in creating database

    When installing Oracle 8i Enterprise Edition for Linux slakware there is a problem of creating the database . while installing if we choose the option of creating the database it hangs at that point .
    Although if we skip the creation of the database it shows that the installation is complete . later when we use dbassist it hangs after displaying few file names last one being for CreateWizardMain.
    we tried using response files, silent mode also but the computer hangs at that point.
    We tried svrmgrl but in that it is displaying an error message for cannot open parameter file with the name that was provided in response file .
    Any Suggestions?

    I spend 2 days on resolving this problem.
    You should make two links:
    ln -s /bin/free /usr/bin/free
    ln -s /usr/bin/awk /bin/awk
    because dbassist looking for this programs.
    This is help me, and i think this help you.
    greet.
    Roman

  • Problem in create database use dbca in RAC

    i setup a two-nodes RAC, and use dbca to create db
    here is the output of dbca
    [oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
    Copying database files
    1% complete
    3% complete
    9% complete
    15% complete
    21% complete
    27% complete
    30% complete
    Creating and starting Oracle instance
    32% complete
    36% complete
    40% complete
    44% complete
    45% complete
    48% complete
    50% complete
    Creating cluster database views
    52% complete
    70% complete
    Completing Database Creation
    73% complete
    76% complete
    79% complete
    80% complete
    81% complete
    90% complete
    99% complete
    100% complete
    Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb/mydb.log" for further details.
    and here is the log output:
    Failed to retrieve network listener resources required for the Real Application Clusters high
    availability extensions configurations on the following nodes: [rac1, rac2].
    Do you want listeners on port 1521 with prefix LISTENER to be created on nodes [rac1, rac2]
    automatically? If you would like to configure the listener with different properties, run NetCA
    before continuing.
    PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-0215: Could not start
    resource 'ora.rac1.ASM1.asm'.]
    PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start
    resource 'ora.rac2.ASM2.asm'.]
    Could not mount the diskgroup on node: rac2. The ASM instance on node rac2 is not started.
    Could not mount the diskgroup on node: rac2. The ASM instance on node rac2 is not started.
    Copying database files
    DBCA_PROGRESS : 1%
    DBCA_PROGRESS : 3%
    DBCA_PROGRESS : 9%
    DBCA_PROGRESS : 15%
    DBCA_PROGRESS : 21%
    DBCA_PROGRESS : 27%
    DBCA_PROGRESS : 30%
    Creating and starting Oracle instance
    DBCA_PROGRESS : 32%
    DBCA_PROGRESS : 36%
    DBCA_PROGRESS : 40%
    DBCA_PROGRESS : 44%
    DBCA_PROGRESS : 45%
    DBCA_PROGRESS : 48%
    DBCA_PROGRESS : 50%
    Creating cluster database views
    DBCA_PROGRESS : 52%
    DBCA_PROGRESS : 70%
    Completing Database Creation
    Failed to start listeners on nodes "[rac1, rac2]" of cluster database "mydb", "CRS-1028: Dependency
    analysis failed because of:
    CRS-0223: Resource 'ora.rac2.LISTENER_RAC2.lsnr' has placement error.".
    DBCA_PROGRESS : 73%
    DBCA_PROGRESS : 76%
    DBCA_PROGRESS : 79%
    ORA-01078: failure in processing system parameters
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+ORADG/mydb/spfilemydb.ora'
    ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
    ORA-15056: additional error message
    ORA-17503: ksfdopn:DGOpenFile05 Failed to open file +ORADG/mydb/spfilemydb.ora
    ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
    ORA-15173: entry 'spfilemydb.ora' does not exist in directory 'mydb'
    ORA-06512: at line 4
    ORA-01034: ORACLE not available
    DBCA_PROGRESS : 80%
    ORA-01034: ORACLE not available
    ORA-01034: ORACLE not available
    ORA-01034: ORACLE not available
    DBCA_PROGRESS : 81%
    ORA-01034: ORACLE not available
    DBCA_PROGRESS : 90%
    Enterprise manager configuration failed due to the following error -
    Invalid username/password.
    Refer to the log file at /opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb/emConfig.log for more
    details.
    You can retry configuring this database with Enterprise Manager later by manually running
    /opt/ora/product/10.2.0/db_1/bin/emca script.
    DBCA_PROGRESS : 99%
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    PRKP-1001 : Error starting instance mydb1 on node rac1
    CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.mydb.mydb1.inst' has placement error.
    PRKP-1001 : Error starting instance mydb2 on node rac2
    CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.mydb.mydb2.inst' has placement error.
    DBCA_PROGRESS : 100%
    Database creation complete. Check the logfiles at
    /opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb for details.
    Database Information:
    Global Database Name:mydb
    System Identifier(SID) Prefix:mydb
    it should be run netca before running dbca?

    this time i run netca first,and then run dbca to configure the ASM,after that i run dbca to create database
    listener and asm instance is online,but when i create DB ,still have error
    Copying database files
    DBCA_PROGRESS : 1%
    DBCA_PROGRESS : 3%
    DBCA_PROGRESS : 9%
    DBCA_PROGRESS : 15%
    DBCA_PROGRESS : 21%
    DBCA_PROGRESS : 27%
    DBCA_PROGRESS : 30%
    Creating and starting Oracle instance
    DBCA_PROGRESS : 32%
    DBCA_PROGRESS : 36%
    DBCA_PROGRESS : 40%
    DBCA_PROGRESS : 44%
    DBCA_PROGRESS : 45%
    DBCA_PROGRESS : 48%
    DBCA_PROGRESS : 50%
    Creating cluster database views
    DBCA_PROGRESS : 52%
    DBCA_PROGRESS : 70%
    Completing Database Creation
    DBCA_PROGRESS : 73%
    DBCA_PROGRESS : 76%
    DBCA_PROGRESS : 79%
    ORA-01078: failure in processing system parameters
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+ORADG/mydb/spfilemydb.ora'
    ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
    ORA-15056: additional error message
    ORA-17503: ksfdopn:DGOpenFile05 Failed to open file +ORADG/mydb/spfilemydb.ora
    ORA-17503: ksfdopn:2 Failed to open file +ORADG/mydb/spfilemydb.ora
    ORA-15173: entry 'spfilemydb.ora' does not exist in directory 'mydb'
    ORA-06512: at line 4
    ORA-01034: ORACLE not available
    DBCA_PROGRESS : 80%
    ORA-01034: ORACLE not available
    ORA-01034: ORACLE not available
    DBCA_PROGRESS : 89%
    DBCA_PROGRESS : 98%
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    PRKP-1001 : Error starting instance mydb1 on node rac1
    CRS-0215: Could not start resource 'ora.mydb.mydb1.inst'.
    PRKP-1001 : Error starting instance mydb2 on node rac2
    CRS-0215: Could not start resource 'ora.mydb.mydb2.inst'.
    DBCA_PROGRESS : 100%
    following info from my template file
    <MiscParams>
    <databaseType>MULTIPURPOSE</databaseType>
    <maxUserConn>20</maxUserConn>
    <percentageMemTOSGA>40</percentageMemTOSGA>
    <customSGA>false</customSGA>
    <archiveLogMode>false</archiveLogMode>
    <initParamFileName>+ORADG/admin/{DB_UNIQUE_NAME}/pfile/init.ora</initParamFileName>
    </MiscParams>
    <SPfile useSPFile="true">{ORACLE_HOME}/dbs/spfile{SID}.ora</SPfile>
    </InitParamAttributes>
    and dbca create +ORADG in /home/oracle dir (why??)
    [oracle@rac1 ~]$ ls +ORADG/admin/mydb/pfile/init.ora.6132011173958
    +ORADG/admin/mydb/pfile/init.ora.6132011173958
    Edited by: 859340 on 2011-7-12 下午7:25

  • Problem to create database with RAC 10g with Oracle Standard Edition

    I install CRS (Cluster Ready Services), and then install Oracle 10g database. Also, I install patches 10.1.0.4. When I create database with ASM storage give me a error to create files database.
    Any idea?
    Thanks
    Edu Alcañiz

    You were right.
    http://download-uk.oracle.com/docs/html/B14203_05/intro.htm#sthref44
    under the section
    "1.3 Configuration Tasks for Oracle Clusterware and Oracle Real Application Clusters"
    "... If you use RAC on Oracle Database 10g Standard Edition, then you must use ASM."
    Thanks, problem solved.
    - Vegard

  • Database limit warning when creating database copy

    Exchange 2010 Standard SP3 RU3.
    2 Server mailbox DAG.
    I have 5 mailbox databases mounted. I have a copy of each database. WHen I try to create a copy for the 5th mailbox database I get the following warning "Server has reached the maximum database limit of 5.
    Looking at my server, There was an old database that was never used in the exchange directory but its not listed in the EMC.
    Is it possible that information about an old database still exists in AD? Where can I verify in Adsiedit what exchange databases it sees?

    Hi,
    One server limited to 5 databases in Exchange 2010 Standard edition.
    So, from the description of your screenshot I summary the following information:
    The following databases stayed on NASD-MBX1:
    Mailbox Database Admin
    Mailbox Database Faculty
    Mailbox Database Faculty Large
    Mailbox Database Faculty Medium
    Mailbox Database Faculty Small (Mounted)
    The following databases stayed on NASD-MBX2:
    Mailbox Database Admin (Mounted)
    Mailbox Database Faculty (Mounted)
    Mailbox Database Faculty Large (Mounted)
    Mailbox Database Faculty Medium (Mounted)
    Public Folder Database (It should be here, right?) (Mounted)
    Now, if we try to make a copy of “Mailbox Database Faculty Small”,
    it will be available as a passive database copy on NASD-MBX2. However, there are five Database mounted on NASD-MBX2 including the Public Folder Database. So it will
    get the error “Server has reached the maximum database limit of 5”. We can delete the Public Folder Database to test it.
    In ADSIEdit, please refer the following image to find these databases.
    Best Regards.

  • Seed mailbox database copy through replication network (DAG members on different subnets in different sites)

    Good afternoon
    I currently operate a two node DAG in our primary site supporting one mailbox database. I plan to introduce a third DAG node in our datacenter which is in a different Active Directory site. Both current DAG members replicate over a dedicated replication
    network to keep the traffic separate from the MAPI traffic. The third DAG member will also have a dedicated replication network adapter (of course, on a different subnet). Ideally I would like to seed the database at a time of my choosing, rather than at the
    moment I add the mailbox database copy (I know how to achieve this), but I would like to specify which network the data replicates over.
    According to the following (see below link) under the 'Seeding and Networks' section as my two DAG members will be on different subnets in different sites Exchange will make the decision to use the MAPI network adapters of the target and source server.
    'If the source server and target server are on different subnets, even if a replication network that contains those subnets has been configured, the client (MAPI) network will be used for seeding.'
    http://technet.microsoft.com/en-us/library/dd335158%28v=exchg.150%29.aspx
    Am I able to force Exchange to use the replication network adapters of both source and target server when I initiate the seeding process? I have a 200+ GB mailbox database that will need to replicate over a 100Mbps internet connection to our secondary
    site and I would like to keep that traffic to the replication network I have configured.
    Any insight would be helpful.

    Hi,
    If you want to specify the networks for seeding, you can use the
    Network parameter when running the
    Update-MailboxDatabaseCopy cmdlet and specify the DAG networks that you want to use.
     If you don't use the Network parameter, then the system uses the following default behavior for selecting a network to use for the seeding operation:
    If the source server and target server are on the same subnet and a replication network has been configured that includes the subnet, the replication network will be used.
    If the source server and target server are on different subnets, even if a replication network that contains those subnets has been configured, the client (MAPI) network will be used for seeding.
    If the source server and target server are in different datacenters, the client (MAPI) network will be used for seeding.
    So please use the Update-MailboxDatabaseCopy cmdlet with
    NetWork parameter to specify which DAG network should be used for seeding.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • Problem in creating database instance in linux through webtool

    Dear sir
    i got sql erroe ,when i mam trying to creat database instance.i am decrbing steps here from point of start.
    Initially i invke two command
    1:/opt/sdb/programs/bin/x_server
    2:/etc/rc.d/init.d/maxdbweb start
    then i invoke web application as:http://localhost:9999/webdbm
    then i m trying to create DATABASE Instance
    1:specify Database/servaername
         Name     : Test12
         Server   : localhost
         Username : dbm
         Password : dbm
    2:the fill the authetication form as(dbm,dbm,dbm),(dba,dba,dba)
    3:use default and specify data and log space
    4:Then i click "Install" button
    then i got error: "-24988 sql error:"
    plz tell me where i m wrong and tell me any another component ,should i start.

    hi Roland
    the output ofthese command is given
    1. Command: dbmcli db_enum
    <b>OUTPUT</b>
    OK
    TEST12  /opt/sdb/7500   7.5.0.23        fast    offline
    TEST12  /opt/sdb/7500   7.5.0.23        quick   offline
    TEST12  /opt/sdb/7500   7.5.0.23        slow    offline
    2.Command: dbcmli -d Test12 -u dbm,dbm db_state
    <b>OUTPUT</b>
    OK
    State
    OFFLINE
    3.Command: dbcmli -d Test12 -u dbm,dbm db_online
    <b>OUTPUT</b>
    ERR
    -24988,ERR_SQL: sql error
    -8888,connection broken server state 4
    <b>Last Some lines of file :Knldiang.err</b>
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE  
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE   -
    > Symbolic Stack Back Trace <----
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      0: 0x0877601a eo670_CTraceStack +0x001e
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9cd20] (0x0,0x0,0x1,0x8776008)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      1: 0x0879448d vabort +0x0039
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9cd50] (0x8add904,0x89282a0,0x89282c2,0x40b9cd78)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      2: 0x08701813 RTE_Crash__FRC20SAPDBErr_MessageList +0x010f
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9cd80] (0x40100001,0x2e5,0x40b9cdc0,0x8701796)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      3: 0x0856eec5 ReadRestartPage__13IOMan_ManageriR18Kernel_RestartPage +0x0261
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9cdc0] (0x40b9d0ec,0x40b9d130,0x0,0x1)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      4: 0x08576e89 bd999ReadRestartPage +0x0075
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d100] (0x408ad608,0x25,0x40b9d130,0x8576e21)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      5: 0x083cbc16 kb57RestoreRestartRecord +0x003e
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d140] (0x25,0x8bb5bac,0x40b9d180,0x83cbc06)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      6: 0x08570f5e OpenAllDataVolumes__13IOMan_Manageri +0x003a
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d180] (0x25,0x25,0x0,0x8570f32)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      7: 0x08576b39 bd999AttachAllDataVolumes +0x0029
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d1b0] (0x408ad608,0x25,0x1,0x8576b1d)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      8: 0x08408e8b b01restart_filesystem +0x0057
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d1e0] (0x25,0x40ba5976,0x40b9d220,0x8408e74)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE      9: 0x086bd8b5 RestartFilesystem__21Kernel_AdministrationR18tgg00_TransContextb +0x0025
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d220] (0x40ba5954,0x1,0x0,0x86bd89e)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     10: 0x086a86fc RestartPrepare__21Kernel_AdministrationR18tgg00_TransContextQ221Kernel_Administration11RestartKind
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE                    R20SAPDBErr_MessageList +0x0038
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d250] (0x8b473e0,0x40ba5954,0x40b90001,0x86a86e0)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     11: 0x086a8e59 RestartIntern__21Kernel_AdministrationR18tgg00_TransContextQ221Kernel_Administration11RestartKindG
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE                    t19SAPDB_Invalidatable2ZUiUi0T3G16Log_IOSequenceNo +0x0061
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d3f0] (0x8b473e0,0x40ba5954,0x0,0x40b9d50c)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     12: 0x086a85ab Restart__21Kernel_AdministrationR18tgg00_TransContextGt19SAPDB_Invalidatable2ZUiUi0T2G16Log_IOSequ
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE                    enceNo +0x0197
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d520] (0x8b473e0,0x40ba5954,0x0,0x0)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     13: 0x0853391a gg999Restart +0x004e
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d580] (0x8b473e0,0x40ba5954,0x0,0x0)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     14: 0x081fd618 ak36restart +0x00e0
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9d5d0] (0x40ba5954,0x40b9f6f8,0x40b9f700,0xffffffff)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     15: 0x081fe9cc a36_call_semantic +0x05fc
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40b9f740] (0x40ba499c,0x40ba3774,0x0,0x81fe3e1)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     16: 0x081efb0f ak35call_semantik +0x0503
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba39b0] (0x40ba499c,0x40ba3a08,0x40ba39ef,0x40ba3a08)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     17: 0x081ef137 a35_asql_statement +0x07d3
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba3a30] (0x40ba499c,0x176,0x0,0x81ee972)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     18: 0x083146bc ak92not_only_execute +0x0858
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba3ab0] (0x40ba499c,0x40ba52d4,0x0,0x8313e75)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     19: 0x08315516 ak92analyze_messagetype +0x07ce
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba3c70] (0x40ba499c,0x40ba3cc8,0x40ba3ccc,0x40ba3dd4)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     20: 0x083161ed a92_mode_analyzer +0x01cd
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba3de0] (0x40ba499c,0x0,0x0,0x0)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     21: 0x0831aa85 ak93one_command +0x0779
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba3ee0] (0x40ba499c,0x0,0x0,0x831a6b4)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     22: 0x0831967d a93_user_commands +0x047d
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba4020] (0x40ba499c,0x1,0x40ba4088,0x1)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     23: 0x0813d9ee ak91run_sql_process +0x00ee
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba40c0] (0x40ba499c,0x40ba40fe,0x40ba40ff,0x813d911)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     24: 0x0813d6c1 ak91run_non_sql_process +0x00bd
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba4510] (0x40ba499c,0x0,0x1,0x813d620)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     25: 0x0813d760 ak91run_user_process +0x0064
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba4550] (0x40ba499c,0x816d2c8,0x0,0x813d70d)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     26: 0x0813dac5 a91mainprogam_with_allocator +0x0041
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba5e20] (0x40ba5f14,0x1,0x400e17f0,0x813da91)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     27: 0x0852e6a9 gg941CreateAllocatorAndCallMainprog +0x01e5
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba5e50] (0x40ba5f14,0x2,0xffffffff,0x25)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     28: 0x0813da68 a91mainprogram +0x003c
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba5ee0] (0x40ba5f14,0x0,0x0,0x813da3c)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     29: 0x087b7b82 en88_CallKernelTaskMain__FP9TASK_TYPE +0x016e
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba5f80] (0x8add904,0x400d4da0,0x87b8080,0x87b8080)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE     30: 0x087b80ae en88_CallCoroutineKernelTaskMain +0x002e
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE          /opt/sdb/7500/pgm/kernel
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE         Frameinfo [0x40ba5fb0] (0x50016be0,0x8b93d80,0x0,0x0)
    2005-03-04 16:07:50  4138 ERR 11599 BTRACE   -
    > End of Stack Back Trace <----
    2005-03-04 16:07:50  4138 ERR 11196 DBCRASH  vabort:Emergency Shutdown, Task: 37

  • Workshop 8.1 beta - problem with creating Database control

    I am using Workshop 8.1 beta to create a webservice, which uses a database control
    to query the Db, as simpel as it comes. However, I get the following exception
    when I try to create the new DBControl:
    java.lang.AssertionError
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.util.DbControlWizardUtil.getTables(DbControlWizardUtil.java:268)
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.util.DbControlWizardUtil.getTablesAndViews(DbControlWizardUtil.java:223)
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.step.PickMethodsStep$4.run(PickMethodsStep.java:299)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:140)
         at java.awt.Dialog.show(Dialog.java:538)
         at com.bea.ide.ui.wizard.WizardDialog.show(WizardDialog.java:117)
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.DbControlWizard.runWizard(DbControlWizard.java:96)
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.FileNewDbControlWizardAction.doAction(FileNewDbControlWizardAction.java:58)
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.DbControlWizardDocHandler.launchWizard(DbControlWizardDocHandler.java:87)
         at workshop.pageflow.ui.dialogs.wizards.jbcx.db.DbControlWizardDocHandler.createNewFile(DbControlWizardDocHandler.java:72)
         at workshop.shell.wizards.NewFileWizard.getDisplayURI(NewFileWizard.java:232)
         at workshop.shell.actions.file.FileNewAction$1.run(FileNewAction.java:111)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
    What's interesting is that it works well for the default dbcontrols of cgDataSource
    and cgSampleDataSource. The connection pool and the datasources were created successfully
    in the server. Its the workshop that seems to be complaining.
    Anyone face this problem?

    Sanjeev,
    This newsgroup is for Workshop 7.0 issues, till WebLogic Platform 8.1 goes
    GA.
    Meanwhile, please post Workshop 8.1 beta issues on
    weblogic.developer.interest.81beta.workshop newsgroup.
    Regards,
    Anurag
    "Sanjeev Saha" <[email protected]> wrote in message
    news:[email protected]...
    >
    I am using Workshop 8.1 beta to create a webservice, which uses a databasecontrol
    to query the Db, as simpel as it comes. However, I get the followingexception
    when I try to create the new DBControl:
    java.lang.AssertionError
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.util.DbControlWizardUtil.getTab
    les(DbControlWizardUtil.java:268)
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.util.DbControlWizardUtil.getTab
    lesAndViews(DbControlWizardUtil.java:223)
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.step.PickMethodsStep$4.run(Pick
    MethodsStep.java:299)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
    atjava.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.ja
    va:197)
    atjava.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java
    :150)
    atjava.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java
    :140)
    at java.awt.Dialog.show(Dialog.java:538)
    at com.bea.ide.ui.wizard.WizardDialog.show(WizardDialog.java:117)
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.DbControlWizard.runWizard(DbCon
    trolWizard.java:96)
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.FileNewDbControlWizardAction.do
    Action(FileNewDbControlWizardAction.java:58)
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.DbControlWizardDocHandler.launc
    hWizard(DbControlWizardDocHandler.java:87)
    atworkshop.pageflow.ui.dialogs.wizards.jbcx.db.DbControlWizardDocHandler.creat
    eNewFile(DbControlWizardDocHandler.java:72)
    atworkshop.shell.wizards.NewFileWizard.getDisplayURI(NewFileWizard.java:232)
    at workshop.shell.actions.file.FileNewAction$1.run(FileNewAction.java:111)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:448)
    atjava.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.ja
    va:197)
    atjava.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java
    :150)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
    What's interesting is that it works well for the default dbcontrols ofcgDataSource
    and cgSampleDataSource. The connection pool and the datasources werecreated successfully
    in the server. Its the workshop that seems to be complaining.
    Anyone face this problem?

  • Network Problem After Creating Database

    Hi,
    We install Oracle 11g on Windows 2008 server. Everything is working fine till the installation of Oracle software. After creating the database when we restart server the network cable shows a unplug for 20 miniutes.
    If we disable all the Oracle service than everything goes fine.
    Please Suggest.
    Thanks and Regards
    Sarfaraz Zomberkar

    This is an interesting problem. Please provide a little more information.
    * When you state Oracle 11g, exactly which release version: 11.1.0.6, 11.1.0.7, 11.2.0.1, or 11.2.0.2 - did you install the 32 bit Database software or the 64 bit Database software?
    * Which options were selected during the installation, and did you tell the installer to create a database during the installation?
    * Exactly which Windows 2008 server version: R1 or R2 - and is the operating system 32 bit or 64 bit?
    * How much memory is in the Windows server?
    * How many network cables are connected between the server and a network switch(es) - you will probably need to look at the back of the server to determine this answer?
    * What are the exact names of the Oracle services that you had to shut down - most likely, the Startup Type of those services are set to "Automatic"
    * Have the appropriate network person take a look at the log of errors on the network switch that is connected to the server - there is a chance that the network switch sensed a problem, such as excessive transmission errors, and shut down the network port to prevent a broadcast storm or a similar problem.
    * Have the appropriate person check the Windows event logs. Do those logs identify the reason why the network port went down?
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Problem in creating database manually

    Hello ,
    I am trying to make database manually and i am successfully created it,but when i am trying to run catalog.sql and catproc.sql my database get dismount automatcally.i also tried to upgrade it via search results on problem but i found this below error when i am typing startup.
    help me.
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist

    970884 wrote:
    Hello ,
    I am trying to make database manually and i am successfully created it,but when i am trying to run catalog.sql and catproc.sql my database get dismount automatcally.i also tried to upgrade it via search results on problem but i found this below error when i am typing startup.
    help me.
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't existAre you running Windows? Is your db service up and running? Also, before you attempt to start teh db, issue +set oracle_sid=<your_db_name>
    Aman....

Maybe you are looking for

  • Bit Operations

    I'm attempting to do some bit operations on a decimal value that I need to output as binary to my instrument. Using universal libraries Digital out vi, I can send an integer value out as a binary number. Is it possible to perform bit operations on a

  • PSC 2100 all-in-one printer

    Hi.   I am having trouble when printing landscape items in the the right hand margin is much larger than the left hand margin, this looks ridiculous when printing say a certificate.  I have tried centering on the application software but it makes no

  • Wildcard in topic names

    Is it possible with Weblogic to subscribe to multiple topics using wildcards?           I may have topics xmlA and xmlB. Can I subscribe to both of them by passing xml*? More importantly, can you do this with MDBs i.e. have wildcards in the descripto

  • RV180W add access point with roaming support

    I have a customer with a RV180w running the latest firmware.  We are currently using the router as a router and to provide wireless access.  We want to add wireless coverage and I am interested in our options.  We have a ethernet backbone which we co

  • How to copy content of multiple text layers to clipboard?

    Hello, I have a lot of text layers in my comp.  I would like to select them all, copy, then paste the content of these text layers (text) to a word processor.  Is there anyway to do this? Jason