Problem sending e-mail using E90

I recently replaced a 9300 with an E90. After transferring data, contacts, access points etc I found that I could receive & open e-mail on the E90 but that any reply, or new outgoing e-mail, "hangs" as "connecting to mailbox" and eventually saves to drafts. I've double checked connection settings, & downloaded the set-up e-mail facility from Nokia, but the problem persists.
Can anyone help on this one?

Hi,
the "e-mail" should be 113-113 113-113 and 25-25 25-25 .
If this does not work,on the setup page you have an option called MTU, reduce that to 1492 and go down gradually to 1200 if needed.

Similar Messages

Problem Sending Verizon Mail Using Mail Program

I have not had a problem sending Verizon mail from my Mail program prior to Mavericks. Now it is giving me fits. I do not have any troubke receiving mail.
This is what I get when I try and send mail through my Verizon account. Do I just check Always Trust and then Connect. There have been no Certificate issues prior to Maverick. What is going on? I did not get anything like this yesterday before I upgraded to Mavericks.

This is what I get when I try and send an e-mail using my Verizon account in mail.
Message was edited by: Stamper

Problem sending e-mail using VB

Hi,
I'm new to GroupWise and developing to it.
I need to send mails from a visual basic application using the groupwaretypelibrary.
Everything works fine, until i call the Message.Send Method.
When i open the client, i can find the message in the outgoing folder, but the "created by" field says "$$$.$$$.$$$" instead of my email address.
If i try to send an email using the client, everything works fine.
Probably it is because i use a remote account?!
Would be glad, if anyone could help me here.

Hi,
the "e-mail" should be 113-113 113-113 and 25-25 25-25 .
If this does not work,on the setup page you have an option called MTU, reduce that to 1492 and go down gradually to 1200 if needed.

Problems sending e'mail (using Windows Live Mail)

Can anyone decipher this message for me.
I can receive e'mails but get this message whenever I try and send a message. I have checked through my e'mail account settings and everything looks as it should.
An unknown error has occurred.
Subject 'Fw: Introduction'
Server Error: 451
Server Response: 451 Invalid Smtp line - Should end with CRLF
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC6A
Protocol: SMTP
Port: 25
Secure(SSL): No
Thanks
Solved!
Go to Solution.

I searched around in other posts and have now resolved the issue - see
http://community.bt.com/t5/BB-Speed-Connection-Issues/email-error-quot-Server-Response-451-Invalid-S...

Ipad2 not sending e mails they just disappear no comments no problem sending e mails on gmail

IPad 2 will not send emails just disappear no response no problem sending e mails using g mail

Have you checked your configuration against the official settings?
http://mail.google.com/support/bin/answer.py?answer=78799
The account name is to include the "@gmail.com" part.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

Sending e-mail using utl_smtp on oracle 9i

Hello
I have problem with sending e-mails using utl_smtp package.
My code looks like this:
lv_mail_conn := utl_smtp.open_connection(lv_mailhost_txt);
utl_smtp.ehlo(lv_mail_conn, lv_mailhost_txt);
res := utl_smtp.command(lv_mail_conn, 'AUTH LOGIN');
res := utl_smtp.command(lv_mail_conn, <login in base64>);
res := utl_smtp.command(lv_mail_conn, <password in base64>);
And I get en error after sending a password to SMTP server.
Error code: 535, text: 5.7.3 Authentication unsuccessful.
This happens on oracle 9i.
I have another server for testing which has oracle 10g installed. This code works fine on oracle 10g but doesn't work on oracle 9i.
Do you have any ideas what's wrong? I assume that SMTP server (microsoft exchange) work correctlys because I can send e-mail from test server.

Ok problem solved :)
Problem was between oracle and MS exchange server. Live server oracle 9i is on linux, and testing server works on windows.
So the problem was with configuration. Our admins corrected it and now works :). I don't know details.

Sending e-mail using Mail on a new AT&T modem

Since installing a new AT&T (Motorola) DSL modem, I cannot send e-mail using Apple Mail. AT&T tells me that it is a known issue with Apple, and that they will put me on "the list" for Apple to contact me. Has anyone gotten any satisfaction on this issue? Thank you.

I have experience the same email-related problem on both my new MacBook Pro and my iPod Touch.
- There are also times when I will start one or the other device and get a message on the screen that reads, in effect, that another device is using the connection and cannot connect the second. (I thought mutliple devices could use the connection at the same time as long as they had the router's password.)
- In addition, the connection will frequently disconnect, and I have to restart the modem to reconnect.
- I have recently installed an Apple Airport Express router (which works just fine), and subsequently had to replace the modem. That's when the troubles started.

Cannot send e-mail using webmail or Thunderbird

Since I was instructed to change my account password and walked through the person with a customer service rep a few weeks ago, I have been unable to send e-mail using Thunderbird. Now, for the last week, I have been unable to send e-mail through Verizon Online (webmail). I seem to be receiving e-mail normally online. Also, I have 3 subaccounts that are working normally.
Any suggestions (other than the ones on the support website--I've followed all those suggestions and changed all those setting, but nothing has worked) would be appreciated. Thanks!

beakersgirl13 wrote:
Since I was instructed to change my account password and walked through the person with a customer service rep a few weeks ago, I have been unable to send e-mail using Thunderbird. Now, for the last week, I have been unable to send e-mail through Verizon Online (webmail). I seem to be receiving e-mail normally online. Also, I have 3 subaccounts that are working normally.
Any suggestions (other than the ones on the support website--I've followed all those suggestions and changed all those setting, but nothing has worked) would be appreciated. Thanks!
What error are you getting when attempting to send through webmail?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Can't send E-mails using Outlook Express on WRT300N

Hello, I searched through the forums to find problems similar to mine, but everyone had a different router than mine, plus none of the solutions worked for me.
I just purchaced and installed my router yesterday. Since the install, I have not been able to send e-mails using Outlook Express, but I do recieve e-mails. I am using the WRT300N Wireless-N Router.
Trying to get my local news service up and running, and right now, e-mail communication is vital........
Thanks.
-Ryan French
Tampa Bay News Online

Well of course, but the error message says socket error, which doesn't tell how to fix it. Even the Outlook Express help site doesn't give any suggestions to fix anything, other than "Your internet connection has failed," which is not the problem.
To the disable firewalls suggestion: I did try disabling my firewalls and all of my virus/ e-mail scan software just to check it out. The thing is, I don't see how my Windows XP Firewall, or anything I've been using could be a problem. Right now, because of the error all my sent e-mails are stuck in the outbox, when I disconnect my router and connect everything back up leaving the router out of the picture, the e-mails are sent out as normal. This problem only occurs with the router connected.
I also need to stream live audio, and I've heard it's a pain using a wireless router...
Thanks for the suggestions, hopefully someone will provide the winning suggestion so I don't have to call customer service!

Sending php mail(); using postfix. Authentication failed.

Trying to set up my localhost to send php mail() using postfix.
I did the following:
Created the sasl_passwd file
Created the sasl_passwd.db file
Edited mail.cf in the postfix folder to include relay host: relayhost=smtp.live.com:587
I'm trying to relay through my hotmail account. The mail.log returns the following:
Jan 24 13:17:30 Richards-MacBook-Pro.local postfix/error[927]: E75CCE40EE4: to=<[email protected]>, relay=none, delay=1580, delays=1580/0.07/0/0, dsn=4.0.0, status=deferred (delivery temporarily suspended: SASL authentication failed; server smtp.live.com[65.55.162.200] said: 535 5.0.0 Authentication Failed)
Any ideas what I'm doing wrong here?

Ok problem solved :)
Problem was between oracle and MS exchange server. Live server oracle 9i is on linux, and testing server works on windows.
So the problem was with configuration. Our admins corrected it and now works :). I don't know details.

Problems sending/eceiving mail

The last month or so I've been having problems sending/receiving mail thru the Apple mail app. the error message is something like, error sending mail, try with another client? Comcast is my mail server, but I also have my Google account accessible thru mail, so I use that to send. I can definitely work around this, but am wondering what I might do to fix it?
Message was edited by: lbell

I have the identical issue with comcast and mail (...) it's really not their issue - I'm sure it's the mail app
Really? What makes you so sure? I've had no problems connecting to any mail servers (within allowed use limits imposed by the server, like not sending from outside their network) using Mail, and I've used it over the years with Earthlink, Adelphia, RoadRunner, GMail, pair.com and Mac.com (those are the ones I remember). If multiple people are having problems with Comcast+Mail, chances are better that Comcast is doing something a little on the edge of dodgy than that Mail is doing something wrong that only shows up with Comcast servers.

HT202304 Can't send e-mails using iCloud address on either my iPhone or Macs ?

Hi guys and gals,
I can't seem to be able to send e-mails using my iCloud address.
No idea why that is. I don't get any error message, the e-mails 'get sent' without any fuss or ending in the outbox folder and they simply do not reach their destinations. There doesn't seem to exist any issues with Apple either. Perhaps my e-mails are being blocked, out of the blue (not by my ISP though, I'm having this problem with whatever network I'm connected to or using internet data on my mobile). ?
Any help would be appreciated, thanks !

Hello,
Is the e-mail account in question a .Mac or .Me account at all?

TS3276 Why can i suddenly not send out mail using mail through my ntlworld account

Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.

Unable to sending a mail using odisend mail

Hi,
i have a need to send a mail using odi send mail, i am using gmail server getting to send a mail, but it getting error like this
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTTLS command first. d19sm1563829ibh.8
     at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
     at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
     at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
     at javax.mail.Transport.send0(Transport.java:169)
     at javax.mail.Transport.send(Transport.java:99)
     at com.sunopsis.dwg.tools.SendMail.actionExecute(SendMail.java:220)
     at com.sunopsis.dwg.function.SnpsFunctionBase.execute(SnpsFunctionBase.java:276)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3430)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1491)
     at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
     at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
please share your opinions for this post
Regards,
901202

http://www.oracle.com/technetwork/java/javamail/faq/index.html#starttls

Problem sending e-mail using E90

Similar Messages

Maybe you are looking for