Problem sending emails and attachments on ios 6

ever since i updated my iPad 2 to i.os 6, i can't seem to send emails and attachments. Also, the mail box doesn't get updated. I tried restoring it back again and readding my gmail account but no avail...please help ASAP!!

thanks for your quick reply alan
yea i have tried a reset...the mails don't seem to be sending..and in the outbox i get the error "sending message content to the server failed" or "an error occured while delivering this message" or "the connection to the outgoing server p-08-smtp.mail.me.com failed"...

Similar Messages

Problems sending email with attachments

This is a long story. We use a satellite connection at home and in our motorhome most of the time. We use our air card (USB 760) for special needs and when we are travelling without our motorhome.
The past two weekends I have had to use the aircard. During that use I prepared some email with various sized attachments (max 1.2 meg). On the first weekend the email with attachments would not send (Eudora/POP3/Godaddy). Then I tried a different ISP I have to use for a special assignment (Eudora/POP3/Bellweather.net) and it went through.
When I got back to the house, I contacted Godaddy and they did not find anything in their system that would cause a problem. During the testing with them, the email with attachments went through just fine (on satellite). I laid it off to a Godaddy problem.
This past weekend, I prepared another email with a small attachment and it would not send via either ISP. Then I connected to the motel wireless and it went just fine via Godaddy.
So, all of the testing points to a problem with my Verizon connection. I have checked and I have the latest software. The Verizon tech folks have evelated it to see if they can figure out what is going on.
Anyone else have the same problem? Any thoughts on what the problem might be?
Jim Shepherd
three zero three 478 thirty five zero one.

Message attachments are allowed in Hosted VZEmail Services using your USB 760 air card. However, to enhance security some attachment types will be blocked and cannot be sent.
The blocked attachment types include, but are not limited to, the following:
.exe
.bat
.pif
.msi
.vbs
.com
Thank you, LatachaM_VZW

Sending emails with attachments through outlook 2003

Hello,
I have recently switch from cablevison to Fios. With Cablevison, I never had a problem with email. However, now I am having problems sending emails with attachments using outlook 2003. I have called Verizon and we troubleshooted the problem and they feel this is a Microsoft problem.
I can send email's without attachments through outlook and verizon.net, but I can't send emails with attachments through outlook, I can send them though verizon.net. All my settings are correct for sending and receiving email.
I called Microsoft and they say it a Verizon problem...
HELP, does anyone have a solution?????
Thanks
Len628

Which antivirus software do you run on your computer? Are there any errors posting? Have you shut off any email firewalls temporarily to attempt to isolate your issue? Do you have outlook 2003 on more than 1 pc in your home? Have your tried to attach a small text file and send it to see if that goes thru successfully?
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

Problems sending emails with iPhone 3G and outlook exchange

I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
Any help much appreciated

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

I have had an iphone 4s for over a year and have had no problems sending emails in hotmail but now I cannot send them. What do I need to do!

I am having problems sending emails in Hotmail on my 4s. It has worked fine for a year but now I can't send them.

It will be your SMTP settings see this doc to troubleshoot
http://www.apple.com/support/iphone/mail/
often adding the password and user name for the carrier helps ,despite it saying not needed !

Outlook 2010 wont send emails with attachments

Hello
I was starting to write the question when we found out what the problem was. So I thought I would share our resolution in here, in case someone fall in the same issue.
One of my user with Outlook 2010 cannot send emails with attachments of some size. +-50 kb files works fine.
But when we try a file of 1mb, the mail goes in the Outbox, Exchange status swith from Connected to Disconnected and the email stay there.
The user is in a remote location, connected through VPN with the network where the Exchange 2013 server is
Here is what I did:
1. Re-create Outlook profile: wont work
2. Re-create Windows profile: wont work
3. Check ip settings: fine
4. Try in OWA: wont work
5. Look at Exchange settings for outgoing email size: 10mb
6. Load my user's Outlook profile on another LAN: works fine
That last point made me thought about a potential problem on the remote user's lan. So I did
7. Check VPN config between the remote site and IT site: fine
After googling the problem, I found that website (http://community.spiceworks.com/topic/396793-outlook-2010-client-suddenly-showing-disconnected-from-2013-exchange-server) that suggest to change the DNS setting on the client. However, the DHCP of my remote
user was the router itself, which is giving a DC as primary DNS, and ISP DNS as secondary. I changed the secondary DNS for another DC in our organization, and guess what? Voila! Problem is gone!
Thinking about it that make not much sense, as the primary DNS is always up the secondary shouldn't be queried. But that's what resolved our problem.
Hope it helps someone!
Martin

Hi Martin,
Thanks for your sharing:)
If you have any question about Microsoft Office, welcome to contact us and feel free to post your issue on Office forum.
Regards,
Winnie Liang
TechNet Community Support

Problem sending email with attachment by android

Good Morning, I'm Luca.
I have this problem:
through a smartphone with Android system,
synchronized via ActiveSync, the user
is unable to send emails with attachments.
While you can receive them and
open them without problem.
We have a server with Exchange 2010.
Is there any authorization that I have to give
you?
Other devices, always with Android system,
with other accounts of course,
does not have the same problem.
Thank you very much
Best regards

Luca, if one user is able to send attachments, the other should be able to as well. However, if an attachment is too large, it won't be delivered.
Agreed, This does sound like a size limitation issue.
Have the person try to send the same file from his outlook on his PC and see if he can send it out, that should be a good indication.

Cant send emails with attachments

All of a sudden I cant send emails with attachments from my iphone or iPad.
Has anyone else had similar issues?
I have deleted and reset the accounts up and also tried different devices all with the same problem.

Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message

Is it possible to send emails with attachments fro...

Hi there,
I was wondering whether it's possible to send emails with attachments from a Nokia 5230, it's just I would like to be able to send emails with attachments without using a computer especially when I'm out on my journeys.
Many thanks,
Tim Auluck
Solved!
Go to Solution.

Hi RocknRollTim,
Thanks for your reply. Have you already tried sending these files? Though you're not able to create all these files on the phone itself, you should be able to send them in an attachment when they're on your memory card.
Uploading a .jpg, .tiff, .gif, .doc, .docx .htm, .html .key, .numbers, .pages, .pdf, .ppt, .pptx, .txt, .rtf, .vcf, .xls or .xlsx file shouldn't be a problem when uploading. Just click on 'Other' when adding an attachment, then on 'Other files' and there you will be able to select any file that you have saved on your memory card.
Whether you can actually send the email depends on the strength of your internet connection (as I mentioned in my previous post). Also keep in mind that the phone itself as well as the network work with a maximum size file that you can send over 3G (more information about this can be found here), and can therfore also limit you in sending large files.
In any case, let me know how you get on so that we can assist further where necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Problem sending emails out...

Problem sending emails when saved first as a draft. When I go to send the final draft, it disappears, including the draft. Very upsetting, happened many times but not consistently...
Help please, any ideas?

I can’t edit emails saved in drafts for both email accounts that I have. Double tapping on the email in the left hand list does nothing. Doubling tapping on the email gives me options to copy or define. Tried resetting the by holding the home and power keys down until the apple appears but nothing. Without this function the ipad is pretty pointless. Is my device faulty? Any help appreciated.

BPEL 10.1.2 & 10.1.3 bug: sending email witch attachments

We would like to get the following (known)bug fixed or learn of a workaround:
Metalink # 5445787:
When BPEL sends emails with attachments which are opened by Outlook clients,
the email body content will also be recongnised as attachment. The end-user
will then receive an e-mail with 2 attachments and empty body text.

Hi,
The bug is being worked on by development. The best thing to do is to log a SR with Oracle Support and say you also need a fix for this bug. The amount of customers waiting for a specific bug fix has sometimes an effect on the priority it is given.
~ronen

How to send Email with attachments

Hi im Trying to send a file as attachment using EMail Activity operator.
Can we do it using Email activity? If yes, then how can we do it? If no, then please tell me about any other method using which i can send a email with attachments.
Regards
Vibhuti

Better late than never, a comprehensive demo on the topic:
REM
REM maildemo.sql - A PL/SQL package to demonstrate how to use the UTL_SMTP
REM package to send emails in ASCII and non-ASCII character sets, emails
REM with text or binary attachments.
REM
REM Note: this package relies on the UTL_ENCODE PL/SQL package in Oracle 9i.
CREATE OR REPLACE PACKAGE demo_mail IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host   VARCHAR2(256) := 'smtp-server.some-company.com';
smtp_port   PLS_INTEGER   := 25;
smtp_domain VARCHAR2(256) := 'some-company.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID   CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY        CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY   CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
                                              utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
                                                  BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER   := 76 / 4 * 3;
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
--   someone@some-domain
--   "Someone at some domain" <someone@some-domain>
--   Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender     IN VARCHAR2,
           recipients IN VARCHAR2,
           subject    IN VARCHAR2,
           message    IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender     IN VARCHAR2,
                recipients IN VARCHAR2,
                subject    IN VARCHAR2,
                mime_type IN VARCHAR2    DEFAULT 'text/plain',
                priority   IN PLS_INTEGER DEFAULT NULL)
                RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN            VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn    IN OUT NOCOPY utl_smtp.connection,
                message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn         IN OUT NOCOPY utl_smtp.connection,
               data         IN VARCHAR2,
               mime_type    IN VARCHAR2 DEFAULT 'text/plain',
               inline       IN BOOLEAN DEFAULT TRUE,
               filename     IN VARCHAR2 DEFAULT NULL,
                  last         IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn         IN OUT NOCOPY utl_smtp.connection,
                 data         IN RAW,
                 mime_type    IN VARCHAR2 DEFAULT 'application/octet',
                 inline       IN BOOLEAN DEFAULT TRUE,
                 filename     IN VARCHAR2 DEFAULT NULL,
                 last         IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn         IN OUT NOCOPY utl_smtp.connection,
                    mime_type    IN VARCHAR2 DEFAULT 'text/plain',
                    inline       IN BOOLEAN DEFAULT TRUE,
                    filename     IN VARCHAR2 DEFAULT NULL,
                    transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                  last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn       IN OUT NOCOPY utl_smtp.connection,
                      sender     IN VARCHAR2,
                      recipients IN VARCHAR2,
                      subject    IN VARCHAR2,
                      mime_type IN VARCHAR2 DEFAULT 'text/plain',
                      priority   IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail IS
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
--   someone@some-domain
--   "Someone at some domain" <someone@some-domain>
--   Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
    addr VARCHAR2(256);
    i    pls_integer;
    FUNCTION lookup_unquoted_char(str IN VARCHAR2,
                      chrs IN VARCHAR2) RETURN pls_integer AS
      c            VARCHAR2(5);
      i            pls_integer;
      len          pls_integer;
      inside_quote BOOLEAN;
    BEGIN
       inside_quote := false;
       i := 1;
       len := length(str);
       WHILE (i <= len) LOOP
      c := substr(str, i, 1);
      IF (inside_quote) THEN
        IF (c = '"') THEN
          inside_quote := false;
        ELSIF (c = '\') THEN
          i := i + 1; -- Skip the quote character
        END IF;
        GOTO next_char;
      END IF;
      IF (c = '"') THEN
        inside_quote := true;
        GOTO next_char;
      END IF;
      IF (instr(chrs, c) >= 1) THEN
         RETURN i;
      END IF;
      <<next_char>>
      i := i + 1;
       END LOOP;
       RETURN 0;
    END;
BEGIN
    addr_list := ltrim(addr_list);
    i := lookup_unquoted_char(addr_list, ',;');
    IF (i >= 1) THEN
      addr      := substr(addr_list, 1, i - 1);
      addr_list := substr(addr_list, i + 1);
    ELSE
      addr := addr_list;
      addr_list := '';
    END IF;
    i := lookup_unquoted_char(addr, '<');
    IF (i >= 1) THEN
      addr := substr(addr, i + 1);
      i := instr(addr, '>');
      IF (i >= 1) THEN
     addr := substr(addr, 1, i - 1);
      END IF;
    END IF;
    RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
                     name IN VARCHAR2,
                     value IN VARCHAR2) IS
BEGIN
    utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
                  last IN            BOOLEAN DEFAULT FALSE) AS
BEGIN
    IF (last) THEN
      utl_smtp.write_data(conn, LAST_BOUNDARY);
    ELSE
      utl_smtp.write_data(conn, FIRST_BOUNDARY);
    END IF;
END;
PROCEDURE mail(sender     IN VARCHAR2,
           recipients IN VARCHAR2,
           subject    IN VARCHAR2,
           message    IN VARCHAR2) IS
    conn utl_smtp.connection;
BEGIN
    conn := begin_mail(sender, recipients, subject);
    write_text(conn, message);
    end_mail(conn);
END;
FUNCTION begin_mail(sender     IN VARCHAR2,
                recipients IN VARCHAR2,
                subject    IN VARCHAR2,
                mime_type IN VARCHAR2    DEFAULT 'text/plain',
                priority   IN PLS_INTEGER DEFAULT NULL)
                RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
BEGIN
    conn := begin_session;
    begin_mail_in_session(conn, sender, recipients, subject, mime_type,
      priority);
    RETURN conn;
END;
PROCEDURE write_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN VARCHAR2) IS
BEGIN
    utl_smtp.write_data(conn, message);
END;
PROCEDURE write_mb_text(conn    IN OUT NOCOPY utl_smtp.connection,
                 message IN            VARCHAR2) IS
BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn    IN OUT NOCOPY utl_smtp.connection,
                message IN RAW) IS
BEGIN
    utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn         IN OUT NOCOPY utl_smtp.connection,
               data         IN VARCHAR2,
               mime_type    IN VARCHAR2 DEFAULT 'text/plain',
               inline       IN BOOLEAN DEFAULT TRUE,
               filename     IN VARCHAR2 DEFAULT NULL,
                  last         IN BOOLEAN DEFAULT FALSE) IS
BEGIN
    begin_attachment(conn, mime_type, inline, filename);
    write_text(conn, data);
    end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn         IN OUT NOCOPY utl_smtp.connection,
                 data         IN RAW,
                 mime_type    IN VARCHAR2 DEFAULT 'application/octet',
                 inline       IN BOOLEAN DEFAULT TRUE,
                 filename     IN VARCHAR2 DEFAULT NULL,
                 last         IN BOOLEAN DEFAULT FALSE) IS
    i   PLS_INTEGER;
    len PLS_INTEGER;
BEGIN
    begin_attachment(conn, mime_type, inline, filename, 'base64');
    -- Split the Base64-encoded attachment into multiple lines
    i   := 1;
    len := utl_raw.length(data);
    WHILE (i < len) LOOP
       IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
      utl_smtp.write_raw_data(conn,
         utl_encode.base64_encode(utl_raw.substr(data, i,
         MAX_BASE64_LINE_WIDTH)));
       ELSE
      utl_smtp.write_raw_data(conn,
        utl_encode.base64_encode(utl_raw.substr(data, i)));
       END IF;
       utl_smtp.write_data(conn, utl_tcp.CRLF);
       i := i + MAX_BASE64_LINE_WIDTH;
    END LOOP;
    end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn         IN OUT NOCOPY utl_smtp.connection,
                    mime_type    IN VARCHAR2 DEFAULT 'text/plain',
                    inline       IN BOOLEAN DEFAULT TRUE,
                    filename     IN VARCHAR2 DEFAULT NULL,
                    transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
    write_boundary(conn);
    write_mime_header(conn, 'Content-Type', mime_type);
    IF (filename IS NOT NULL) THEN
       IF (inline) THEN
       write_mime_header(conn, 'Content-Disposition',
         'inline; filename="'||filename||'"');
       ELSE
       write_mime_header(conn, 'Content-Disposition',
         'attachment; filename="'||filename||'"');
       END IF;
    END IF;
    IF (transfer_enc IS NOT NULL) THEN
      write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                  last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (last) THEN
      write_boundary(conn, last);
    END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
    end_mail_in_session(conn);
    end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
BEGIN
    -- open SMTP connection
    conn := utl_smtp.open_connection(smtp_host, smtp_port);
    utl_smtp.helo(conn, smtp_domain);
    RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn       IN OUT NOCOPY utl_smtp.connection,
                      sender     IN VARCHAR2,
                      recipients IN VARCHAR2,
                      subject    IN VARCHAR2,
                      mime_type IN VARCHAR2 DEFAULT 'text/plain',
                      priority   IN PLS_INTEGER DEFAULT NULL) IS
    my_recipients VARCHAR2(32767) := recipients;
    my_sender     VARCHAR2(32767) := sender;
BEGIN
    -- Specify sender's address (our server allows bogus address
    -- as long as it is a full email address ([email protected]).
    utl_smtp.mail(conn, get_address(my_sender));
    -- Specify recipient(s) of the email.
    WHILE (my_recipients IS NOT NULL) LOOP
      utl_smtp.rcpt(conn, get_address(my_recipients));
    END LOOP;
    -- Start body of email
    utl_smtp.open_data(conn);
    -- Set "From" MIME header
    write_mime_header(conn, 'From', sender);
    -- Set "To" MIME header
    write_mime_header(conn, 'To', recipients);
    -- Set "Subject" MIME header
    write_mime_header(conn, 'Subject', subject);
    -- Set "Content-Type" MIME header
    write_mime_header(conn, 'Content-Type', mime_type);
    -- Set "X-Mailer" MIME header
    write_mime_header(conn, 'X-Mailer', MAILER_ID);
    -- Set priority:
    --   High      Normal       Low
    --   1     2     3     4     5
    IF (priority IS NOT NULL) THEN
      write_mime_header(conn, 'X-Priority', priority);
    END IF;
    -- Send an empty line to denotes end of MIME headers and
    -- beginning of message body.
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (mime_type LIKE 'multipart/mixed%') THEN
      write_text(conn, 'This is a multi-part message in MIME format.' ||
     utl_tcp.crlf);
    END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
    utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
    utl_smtp.quit(conn);
END;
END;
/

My ipod won't let me send emails and says it is rejected by the server? Any ideas how to fix this? thanks

My ipod touch won't allow me to send emails and a box appears saying the message was rejected by the server? Any ideas how I can resolve this please?
Thanks

Try deletng the account from the iPod and re-entering the settings.
Also see:
iOS: Unable to send or receive email
Did it work before?
Does it send OK from another device?

I can send emails and texts on my iPhone but not receive

How can it be possible that I am sending emails and texts but not receiving either?

Hi Go to Settings email accounts delete each account then add back again. Text messages are run by your network provider check with them for that problem. Cheers Brian

Problem sending emails and attachments on ios 6

Similar Messages

Maybe you are looking for