Problem sending externail mail from SAP

I am facing problem in sending external mail from SAP. for ex: yahoo, hotmail like that. But, i can able to send the mails to my domain ids. I have configured both the SMTP and SAP internet gateway to send mails.
But, i dont know what could be the problem in sending external mails.
Is there any body to help me in this regard
Regards,
B.Sudharsan

Hi Sudarsan,
How are you trying to send an e-mail using ABAP or using actions or ?
Enclosed link gives you a complete overview of the settings and the way to send an e-mail using ABAP ( if necessary).
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Reward points if it helps.
Regards,
Vamsi Krishna P.

Similar Messages

Sample code to send a mail from SAP

Hi guys
could any one provide me with the
sample code to send a mail from SAP with text as the main body of that mail via bcs classes

Hi,
     Please go through this code: U can send mail;
Tables : zchp_cust-info.
DATA: OBJCONT LIKE SOLISTI1 OCCURS 5 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: ENTRIES LIKE SY-TABIX.
DATA: NAME(15).
DATA: CON_NAME(20).
DATA: req_num like zchp_cust_info.
DATA: I_TAB_CHP LIKE ZCHP_CUST_INFO OCCURS 0 WITH HEADER LINE.
*data: reno like ZCHP_CUST_INFO-req_num value .
data input for the mail
select * from zchp_cust_info
appending table i_tab_chp where req_num = c_knumv.
LOOP AT I_TAB_CHP.
concatenate i_tab_chp-created_by i_tab_chp-req_num into CON_NAME.
*WRITE: / con_name.
ENDLOOP.
Fill the document
DOC_CHNG-OBJ_NAME = 'Refe'.
DOC_CHNG-OBJ_DESCR = 'TESCRA Ref Number !'.
DOC_CHNG-SENSITIVTY = 'P'.
*OBJCONT = 'Tescra'.
OBJCONT = CON_NAME.
APPEND OBJCONT.
OBJCONT = con_name.
APPEND OBJCONT.
DESCRIBE TABLE OBJCONT LINES ENTRIES.
READ TABLE OBJCONT INDEX ENTRIES.
DOC_CHNG-DOC_SIZE = ( ENTRIES - 1 ) * 255 + STRLEN( OBJCONT ).
Fill the receiver list
CLEAR RECLIST.
RECLIST-RECEIVER = SY-UNAME. " replace with <login name>
RECLIST-REC_TYPE = 'B'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
CLEAR RECLIST.
RECLIST-RECEIVER = 'sapuser'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
Send the document
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_TYPE = 'RAW'
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
     TABLES
          OBJECT_CONTENT = OBJCONT
          RECEIVERS      = RECLIST
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
               DOCUMENT_NOT_SENT          = 2
              OPERATION_NO_AUTHORIZATION = 4
               OTHERS                     = 99.
    CASE SY-SUBRC.
      WHEN 0.
        LOOP AT RECLIST.
          IF RECLIST-RECEIVER = SPACE.
            NAME = RECLIST-REC_ID.
          ELSE.
            NAME = RECLIST-RECEIVER.
          ENDIF.
          IF RECLIST-RETRN_CODE = 0.
            WRITE: / NAME, ': succesfully sent'.
          ELSE.
            WRITE: / NAME, ': error occured'.
          ENDIF.
        ENDLOOP.
      WHEN 1.
        WRITE: / 'Too many receivers specified !'.
      WHEN 2.
        WRITE: / 'No receiver got the document !'.
      WHEN 4.
        WRITE: / 'Missing send authority !'.
      WHEN OTHERS.
        WRITE: / 'Unexpected error occurred !'.
    ENDCASE.
<b>Please provide points if the issue is solved.</b>
Regards,
Sunil

I have problems sending e-mail from my iPhone. I can receive OK.

I have problems sending e-mail from my iPhone. I can receive OK. The e-mail gets put in the outbox, but never goes out.

Did you set it up following this:
http://portal.activehost.com/knowledgebase.php?action=displayarticle&id=4744

How will we send smtp mail from SAP via Exchange

Hi;
We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
Please help me,
Thanks for answers.
Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
Edited by: Thomas Zloch on Nov 22, 2010 2:39 PM

Hi,
What is the nature of the URL you wish to include in the e-mail ?
Is it fixed or dynamic ?
Cheers
Colin.

To send outbound mails from SAP

Hi team,
Here i need to configure email setting from SAP to any other email ID ( yahoo,gmail etc).For this configuration do i need to confgure any program or to genrate some RFC settings.
Can some one guide me the process step by step what to be done to send outbound mails from SAP. Immediate help will be really appreciated.
thanks in advance.

Check note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Markus

Problem while sending the mail from sap

Hi experts,
                 I am facing some problem while sending mail from sap to external mail.
this is th code i am using but it is not working. plz check and tell me.
REPORT ZMAIL_DEMO.
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
break-point.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = 'SOME MAIL ID'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'RAW'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc = 0.   "( did not receive any mail) *
write : 'mail sent'.
endif.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Once again, I have problems sending e-mails from my iPad 2. I have a telus account and I have dealt with their tech people and they have checked all my settings and everything is fine. Apple techs advised to open Gmail acct. and re-route through it? Why?

I am having a difficult time trying to send e-mails from my iPad 2? I have contacted my Telus server tech people and we have double checked all my settings. Everything is properly set! Checked with my Apple people and they say this is a common problem with my server, yet others with the same server don't seem to have a problem. They suggested that I open a Gmail account and infor my mail server(Telus) to route my mail through my Gmail account? Does thei make sense? Are ther any other solutions I might investigate?

Hi prettytoni,
I saw one interesting solution to set a gmail account like as it is a "Microsoft Exchages" account... Maybe you can try to do the similiar with your Telus account? (I'm not sure about the result, but still you can try it))))
here is the link:
http://www.maclife.com/article/howtos/how_set_your_gmail_accounts_push_email

How to send a mail from SAP 3.1H Ver.

Hi,
I am working on SAP 3.1H Version. I need to send mail from one of my ABAP program. Since SAP 3.1H version does not have Standard function modules which send mails from any ABAP program so how can I achive this task in this version of SAP.
The Operating system of my application server is Sun solaris.
Waiting for an early and postive reply.
Thanks & Regards,
Maqsood Khan

REPORT ZSAPMAIL NO STANDARD PAGE HEADING.
TABLES: DRAD,
        QINF,
        DRAW,
        SOUC,
        SOFD,
        DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
mail declarations
DATA : BEGIN OF NEW_OBJECT_ID.         " the newly created email object
        INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID.             " the folder id of the outbox
        INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5.     " the table which will contain the
        INCLUDE STRUCTURE SOOS1.       " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE.      " the table which contains the
        INCLUDE STRUCTURE SOOD1.       " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE.        " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP.    " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5.      " the header of the object
        INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0.      " the contents of the object
        INCLUDE STRUCTURE SOLI.        " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5.      " formatting options
        INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5.      " formatting options
        INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
        STRING(255),                   "user via mailbox
       END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
    d_username = p_uname.
    PERFORM POPULATE_EMAIL_TEXT.
    PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
    PERFORM CREATE_AND_SEND_MAIL_OBJECT.
      FORM POPULATE_EMAIL_TEXT                                      *
      Inserts text for email message                                *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING.            "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING.            "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1    Header2    Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '----
APPEND T_MAIL_TEXT.
ENDFORM.
*&      Form SETUP_TRX_&_RTX_MAILBOXES
Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
get the user no of the sender in order to add the mail to the
user name's outbox for future reference
SELECT SINGLE * FROM SOUC
           WHERE SAPNAM = SY-UNAME.    "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
    "Error finding the SAPoffice user info for the user
    MESSAGE E064(ZR53) WITH SY-UNAME.
    P_RETURN_CODE = 1.
    EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
                                       " type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP   "Owner type from ID
                       AND OWNYR = SOUC-USRYR   "Owner year from the ID
                       AND OWNNO = SOUC-USRNO   "Owner number from the I
                       AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
    " Error getting folder information for the user
    MESSAGE E065(ZR53) WITH SY-UNAME.
    P_RETURN_CODE = 1.
    EXIT.
ENDIF.
ENDFORM.                               " SETUP_TRX_&_RTX_MAILBOXES
*&      Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP.        " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR.        " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO.        " the folder no.
OBJECT_TYPE     = 'RAW'.             " the type of object being added
build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM.   " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT.   " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'.       " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'.       " the object sensitivity
F is functional, C - company sensitive
object_hd_change-skips = ' '.       " Skip first screen
object_hd_change-acnam = 'SM35'.    " Batch imput transaction
object_hd_change-vmtyp = 'T'.       " Transaction type
add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
free objcont.      " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
    OBJCONT-LINE = T_MAIL_TEXT-STRING.
    APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM.            " the date to send the email
REC_TAB-RCTIM = SY-UZEIT.            " the time to send the email
the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
    WRITE : / TEXT-001, D_USERNAME.    "usnam.
    EXIT.
ENDIF.
the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
check for delivery on the email
REC_TAB-DELIVER = 'X'.
send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
check for a return receipt
REC_TAB-READ = 'X'.
the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME.       "usnam.
add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
       EXPORTING
            FOLDER_ID                  = FOLDER_ID
            OBJECT_HD_CHANGE           = OBJECT_HD_CHANGE
            OBJECT_TYPE                = OBJECT_TYPE
            OWNER                      = SY-UNAME
       IMPORTING
            OBJECT_ID                  = NEW_OBJECT_ID
       TABLES
            OBJCONT                    = OBJCONT
            OBJHEAD                    = OBJHEAD
            OBJPARA                    = OBJPARA
            OBJPARB                    = OBJPARB
       EXCEPTIONS
            ACTIVE_USER_NOT_EXIST      = 1
            COMMUNICATION_FAILURE      = 2
            COMPONENT_NOT_AVAILABLE    = 3
            DL_NAME_EXIST              = 4
            FOLDER_NOT_EXIST           = 5
            FOLDER_NO_AUTHORIZATION    = 6
            OBJECT_TYPE_NOT_EXIST      = 7
            OPERATION_NO_AUTHORIZATION = 8
            OWNER_NOT_EXIST            = 9
            PARAMETER_ERROR            = 10
            SUBSTITUTE_NOT_ACTIVE      = 11
            SUBSTITUTE_NOT_DEFINED     = 12
            SYSTEM_FAILURE             = 13
            X_ERROR                    = 14
            OTHERS                     = 15.
IF SY-SUBRC NE 0.
    MESSAGE A063(ZR53) WITH SY-SUBRC.
    EXIT.
ENDIF.
call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
            FOLDER_ID                  = FOLDER_ID
            OBJECT_ID                  = NEW_OBJECT_ID
            OUTBOX_FLAG                = 'X'
            OWNER                      = SY-UNAME
       TABLES
            RECEIVERS                  = REC_TAB
       EXCEPTIONS
            ACTIVE_USER_NOT_EXIST      = 1
            COMMUNICATION_FAILURE      = 2
            COMPONENT_NOT_AVAILABLE    = 3
            FOLDER_NOT_EXIST           = 4
            FOLDER_NO_AUTHORIZATION    = 5
            FORWARDER_NOT_EXIST        = 6
            NOTE_NOT_EXIST             = 7
            OBJECT_NOT_EXIST           = 8
            OBJECT_NOT_SENT            = 9
            OBJECT_NO_AUTHORIZATION    = 10
            OBJECT_TYPE_NOT_EXIST      = 11
            OPERATION_NO_AUTHORIZATION = 12
            OWNER_NOT_EXIST            = 13
            PARAMETER_ERROR            = 14
            SUBSTITUTE_NOT_ACTIVE      = 15
            SUBSTITUTE_NOT_DEFINED     = 16
            SYSTEM_FAILURE             = 17
            TOO_MUCH_RECEIVERS         = 18
            USER_NOT_EXIST             = 19
            X_ERROR                    = 20
            OTHERS                     = 21.
IF SY-SUBRC EQ 0.
    MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
    MESSAGE I036(ZR53) WITH D_USERNAME."      sy-subrc.
ENDIF.
ENDFORM.                               " CREATE_AND_SEND_MAIL_OBJECT
award points if useful,
Aleem.

How to apply Password Protection On attachment send through mail from SAP

Hi All,
I want to apply Password Protection on file send as an attachment from SAP on Email.
I know how to send email from sap with attachment in it. A smartform is coverted to a attachment and send on email.
But how can i apply password protection on it.
Any type of file format will be fine. I just need to know how can i make that file as password protected.
Thanks in advance.
Sonal Jain.

>
Sonal Jain wrote:
But how can i convert the PDF to folder and than how can i zip that folder with password protection.
Not folder but file (I do hope you understand the difference). Have you tried to search SDN at all? I don't have much time, but before replying initially I did just a quick search and it brought several posts mentioning the archiving functionality. And I'm sure 'Smartform to PDF' will bring up gozillion posts. Also I find the Google search with addition 'site:sap.com' to be quite helpful.
However, I would still recommend to review the requirements. Why exactly do you need this password protection? If there is a fear that someone other than a recipient might get access to the email account then there is really a bigger security issue in the organization and it should be resolved by some other means. As I have mentioned, password does not really add much protection.
Out of curiosity I briefly looked at the IRM description on the Microsoft's web site and it doesn't seem to be very helpful. First of all, it's the MS software and has to be installed on the user's PC and configured (how do we know the emai recipients are even on Windows?). Also it does say "Prevent an unauthorized recipient from accessing e-mail content", but I didn't quite get how exactly. Is there a retinal scan that comes with it? And the list of things it does not do gives you the whole another perspective on the email security.

Problems sending e-mail from right gmail alias

I recently bought a new Macbook. Trying to synchronise Mail with my Gmail account, I have problems. On my Gmail account, I receive and send mail from multiple aliases. On my previous computer I didn't have any problems with this. Can you tell me how I can select the right alias from my Gmail account, so I can easily send an e-mail from Mail from the right address?
Thnx

Hello ch4nt4lk,
The article linked below details how to set up and use your aliases in Mail.
Mail (Yosemite): Use email aliases
http://support.apple.com/kb/PH19136
Cheers,
Allen

Problem Sending e-mail from iPod Touch 4g through yahoo and gmail

The weird thing is, I get e-mail fine on my iPod from both yahoo and gmail, and send fine from one or two wifi networks, but can't send at all from one or two OTHER networks, even though the internet works fine on all of the networks I connect to, and I can perform other actions. Tried resetting my network settings, has not helped. Any ideas?

Sounds like the network's firewall or other security feature is blocking the ports used for sending the emails.
What type of neworks do not work? A businees network?

How to send a mail from SAP to Users more than 200

Hi
some one can help i have one scenario in my company we have to send a mail to our user more than 200 to inform price changes once in a month or two month
Thanks in advance
Best Regards,
MH

Hi Mohammed
As you want to send to around 200 customers then maintain a condition record with the combination of Output medium 7 in the Output medium field
Second Option is Go to VA02 -> Edit -> Editor to reach the SAPscript Editor and then come back to the header output data and then The system sends the electronic mail at the time you have specified in the timing data..
Regards
Srinath

Problem while sending e-mail from SAP

Hi,
I need to modify customized report, my problem is i need to download as .XLS file as well i need to send as an attachment to e-mail. If i select with NO-Delimeter the attachment comming as .TXT file and if i select any delimeter that occupying one cell in .XLS file.
Can anyone help me out in this.
Thanks,
Yogesh

Hi Yogesh,
Refer the following code as pointer to sending email with attachment.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra

Problem sending yahoo mail from ipad

Att has checked validity of password. I am able to receive and send email from yahoo website but not on ipad mail

Hi Stephie4,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if you are not able to send or receive email from your iPad:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Best,
Jeremy

Send External Mail from SAP

Hi all,
I have one ALV-report which has 64 columns.
Now i want to send this report to external mail.
I have already created a program for this but the problem is that my report contains 64 columns but only 30 columns is sending to external mail remaining data is not generating in excel sheet.

first check o/p in spool t.code sp02
o/p is having 64 columns or 30.

Problem sending externail mail from SAP

Similar Messages

Maybe you are looking for