Problem sending mail with ATTATCHMENTS
hi all,
Im doing something like this to send a mail with attatchments:
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject(subj);
MimeBodyPart textPart = new MimeBodyPart();
textPart.setContent(text, "text/plain");
File f = new File(filename);
MimeBodyPart attachFilePart = new MimeBodyPart();
FileDataSource fds = new FileDataSource(f);
attachFilePart.setDataHandler(new DataHandler(fds));
attachFilePart.setFileName(fds.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(textPart);
mp.addBodyPart(attachFilePart);
msg.setContent(mp);
Transport.send(msg);
this is working for the first time........
if I execute this for the second time.... my attatchments are visibile inside the message..... something like this...
------=_Part_28_1086341.1034758766530
sd
<br>fa
<br>sdf
<br>sd
<br>
------=_Part_28_1086341.1034758766530
Content-Disposition: attachment; filename="2day's Work.txt"
Today's tasks done:
OCR conversion for the following:
1) pages rescaned in 12th class part A.
2) pages 61- in 12th class part C.
------=_Part_28_1086341.1034758766530--
it is showing the attatchment content inside when i run the same code for the second time....
anyone can help me out!!!
thax in adv,
kiran
yup.. it worked navaz.....
thx a lot... may i know whatz happening here...
thx again...
kiran
Similar Messages
-
Problem sending mail with attachments???
Hi Everybody,
I have got a problem sending mail with attachments...
I am able to send a plain mail ... but when i am trying to send mail along with an attachment ... its not being sent....
its not showing any error it is simply hanging...
what should i do?
If u know any solns please do suggest me....
Thanks in advanceactivation.jar is already there...
initially i wrote a swing program as a front end and it was working abs fine... in my sense it was properly sending mails along with the attachments...
when i changed the front-end to JSP handled by Servlets i am getting a problem...
and even the swing program stopped working ...
now swing program is getting compiled but it is hanging at run time showing an exception "Exception occured during event dispatching"
i dont understand what probably may be the problem...
if u can trace out, please give me any suggestions
Thanks in advance and regards -
Problem sending mail with roaming profile (Outlook 2010)
Hello all,
I hope you will be able to help me.
Here's the problem I have with Outlook 2010:
When a user opens a roaming profile on another
PC or on his new
PC, everything works perfectly except
Outlook.
Outlook opens normally with all email
accounts, you can even see the email, no worries
about that.
But when we want to send an email, it
gets stuck in the outbox.
Some additional info:
- In the account settings,
you can test the account settings, it says
that everything is working (sending and receiving)
- The only way I found today to
operate the account is to
completely remove and reconfigure
- There is an error message
that says I can not write on the file C:\Users\UserName\AppData\Roaming\Microsoft\Outlook\accountName.pst
- The problem occurs with
all users, not just one in particular
- The accounts are IMAP
- Incoming emails work
Thank you for your help.Hi Tim,
This is a known issue in Outlook, we don't recommend using IMAP account with roaming profile.
For more information, you might want to read this similar thread:
https://social.technet.microsoft.com/Forums/office/en-US/f9b1bf03-d468-46e8-b40d-76fac11fd66c/outlook-2010-creates-new-imap-pst-files-at-random-and-cannot-send-mail-roaming-profiles-and-imap?forum=outlook
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Problems sending mail with Exchange SBS 2003 / apple mail
Here is an odd one. I can easily sync up with the exchange server at my office using my mac. I can view new mail, view sent mail and drafts easily.
When sending e-mail, it is a crap-shoot if it actually will send it or not. Sometimes it goes through, but the majority of the time it does not. I get delay messages from the server, and ultimately I get the "failed to send" message. But the mail is getting to the exchange server because I can see it in the queue.
Through Parallels, I was able to successfully configure and run Outlook 2004. When testing the same e-mail addresses, the Outlook mail went through easily, but the apple mail stalled and eventually failed.
On top of this, I can send e-mails to certain domains without ever getting an error through apple mail (i.e. a local company, hotmail.com, etc). Whereas others always or most of the time give me errors (cox.net, yahoo.com, another local company).
I checked the message queue on the exchange server and sure enough they were stuck trying to resend every 5 minutes - with no luck. There has to be a security setting or something preventing me from being able to send mail through my apple mail app.This was an issue with my Exchange server.
-
Problem sending mail with SMTP and SSL
Hi,
I am trying to send mail using JavaMail 1.4/jdk1.5 using ssl. I save the certificate by going into IE and exporting the certificate and added the certificate using the keytool to ${JAVA_HOME}/jre/lib/security/cacerts.I have also added this in the code using
System.setProperty("javax.net.ssl.trustStore","${JAVA_HOME}/jre/lib/security/cacerts");But I am still getting the following error.
DEBUG SMTP: trying to connect to host "XXXX", port 465, isSSL true
DEBUG SMTP: exception reading response: javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
Exception in thread "main" javax.mail.MessagingException: Exception reading response;
nested exception is:
javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1462)
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1260)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
at javax.mail.Service.connect(Service.java:275)
at glycomics.common.util.SendMailUsingAuthentication.postMail(Unknown Source)
at glycomics.common.util.SendMailUsingAuthentication.main(Unknown Source)
Caused by: javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:166)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1518)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1485)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1468)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1394)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:86)
at com.sun.mail.util.TraceInputStream.read(TraceInputStream.java:97)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
at com.sun.mail.util.LineInputStream.readLine(LineInputStream.java:75)
at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1440)
... 5 more
Caused by: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:56)
at sun.security.validator.Validator.getInstance(Validator.java:146)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.getValidator(X509TrustManagerImpl.java:105)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:167)
at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(SSLContextImpl.java:320)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:841)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:106)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:495)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:433)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:818)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1030)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:678)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
... 10 more
Caused by: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at java.security.cert.PKIXParameters.setTrustAnchors(PKIXParameters.java:183)
at java.security.cert.PKIXParameters.<init>(PKIXParameters.java:103)
at java.security.cert.PKIXBuilderParameters.<init>(PKIXBuilderParameters.java:87)
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:54)Has anybody faced similar problem??Any suggestions??
TIA
M
Message was edited by:
c@de-m@nkeySee SSLNOTES.txt and the JavaMail FAQ for debugging hints.
If you turn on all the debugging output and still can't figure it out,
you'll probably need to ask in some Java security forum. The
problem is occurring when making the connection using SSLSocket,
before any JavaMail code comes into play. -
Problem Sending Mail With IPod Touch
AOL is my primary ISP. The settings for the incoming and outgoing server for AOL are definately correct as confirmed by my serivce provider.
But for some strange reason i can receive all my emails but can not send a single one. Each time i get the error message: "Te connection to the outgoing server "stmp.aol.com" failed".
I've tried deleting the account and re-adding it but to no avail.
It seems to work fine for Yahoo and GMail, just not for AOL.
Was wondering if other people have the same problem or just me.I don't have AOL, but I initially had the same problem with Comcast. Then someone on this forum pointed out that, in the Mail setup, you have to put in your password for both ingoing and outgoing mail. It said the password for outgoing was "optional," but that was incorrect. Once I set the password for both, it worked fine. Maybe that's why some of you are having problems with other e-mail providers.
-
Problem sending mail with authentication
Please help as I've spent the last two days trying various things to solve my problem to no avail. I have been able to send email through the smtp server I have access to (just for interest, smtp.cs.stir.ac.uk), to email addresses in the same domain (e.g [email protected]) because the server does not require me to log in to do this - I can do it anonymously.
My problem comes when I try to send an email outwith the cs.stir.ac.uk subdomain, (e.g [email protected]) because it requires me to login. So I set about learning about authenticating with smtp servers using the javamail package, and I found two methods of doing it, both of which threw a javax.mail.AuthenticationFailedException. I believe this exception is only thrown when a username or password is wrong and I can't understand it because I'm definitely using the same user/pass combo as I do to log into my webmail. The stack trace for the exception is:
javax.mail.Service.connect(Service.java:264)
javax.mail.Service.connect(Service.java:134)
javax.mail.Service.connect(Service.java:86)
com.sun.mail.smtp.SMTPTransport.connect(SMTPTransport.java:144)
javax.mail.Transport.send0(Transport.java:150)
javax.mail.Transport.send(Transport.java:80)
EmailAuth.send(EmailAuth.java:80)
EmailAuth.<init>(EmailAuth.java:40)
EmailPanel.actionPerformed(EmailPanel.java:56)
javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1764)
javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1817)
javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:419)
javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:257)
javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
java.awt.Component.processMouseEvent(Component.java:5093)
java.awt.Component.processEvent(Component.java:4890)
java.awt.Container.processEvent(Container.java:1566)
java.awt.Component.dispatchEventImpl(Component.java:3598)
java.awt.Container.dispatchEventImpl(Container.java:1623)
java.awt.Component.dispatchEvent(Component.java:3439)
java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
java.awt.LightweightDispatcher.processMouseEvent(Container.java:3165)
java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
java.awt.Container.dispatchEventImpl(Container.java:1609)
java.awt.Window.dispatchEventImpl(Window.java:1585)
java.awt.Component.dispatchEvent(Component.java:3439)
java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
And the code I'm using is:
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
public class EmailAuth
public String uname;
public String pword;
public EmailAuth(String host, String username, String password, String message,
String subject, String from, String[] to) throws MessagingException {
uname = username;
pword = password;
send(host, username, password, message, subject, from, to);
public void send( String host, String username, String password, String message,
String subject, String from, String[] to) throws MessagingException
boolean debug = false;
Properties props = new Properties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.auth", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[to.length];
for (int i = 0; i < to.length; i++)
addressTo[i] = new InternetAddress(to);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication(String username, String password)
return new PasswordAuthentication(username, password);
Any help is greatly appreciated!!try logging in to the SMTP server with that username/pwd manually. i've done this in win32 using telnet...
at the command prompt, enter "telnet mail.host.com 143", then from within telnet type "a1 login username password". the SMTP server should respond with something like "a1 OK LOGIN completed" if accepted. then, close the session by entering "a2 logout" (or just kill the telnet session).
the exchange should look like this:
telnet mail.host.com 143 * OK IMAP4rev1 server ready (3.0.14)
a1 login username password
a1 OK LOGIN completed
a2 logout
* BYE IMAP4rev1 Server logging out
a2 OK LOGOUT completed
Connection to host lost.
peace
bobD -
Problems sending mail with txt attachtment using SO_DOCUMENT_SEND_API1 MF
Hi gurus,
I allready tried to search in the forum some threads related with my problem, but i couldnt found any with the same problem that im having.
My problem it's when attachting an txt file, using MF SO_DOCUMENT_SEND_API1 MF, the mail attachtment it's coming with the txt file but instead of coming with the all lines in the contents_bins table the file it's coming with a few lines. I think the problem it's that the txt file should come with 80 characters per line, like it's on the contents_bin table, buu instead that the MF it's filling me each line of the file with 1024 characters.
Does anyone has ideas what im doing wrong?
Ps - Below goes my code.
Thanks in Advance,
Best Regards,
João Martins.
CLEAR contents_bin.
REFRESH contents_bin.
PERFORM get_attachment TABLES tab_movimentos contents_bin
USING linha_inicial
linha_final.
CLEAR: document_data, tab_lines.
MOVE 'Aviso Ficheiro Retorno' TO document_data-obj_descr.
MOVE 'Aviso Ficheiro de Retorno TU' TO document_data-obj_name.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255
+ STRLEN( contents_txt ).
CLEAR packing_list.
REFRESH packing_list.
packing_list-transf_bin = space.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
DESCRIBE TABLE contents_txt LINES packing_list-body_num.
packing_list-doc_type = 'RAW'.
APPEND packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 1.
packing_list-head_num = 1.
ADD 1 TO tab_lines.
packing_list-body_start = tab_lines.
CLEAR: lv_filename, tab_lines.
CONCATENATE 'Fich Retorno -' nome_ficheiro INTO lv_filename.
DESCRIBE TABLE contents_bin LINES tab_lines.
packing_list-doc_type = 'TXT'.
packing_list-obj_descr = 'Ficheiro Retorno'.
packing_list-obj_name = lv_filename.
packing_list-doc_size = tab_lines * 255.
APPEND packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
put_in_outbox = 'X'
sender_address = 'SIFJOB'
sender_address_type = 'B'
IMPORTING
sent_to_all = sent_to_all
TABLES
packing_list = packing_list
contents_bin = contents_bin
contents_txt = contents_txt
receivers = tab_receiver
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = SPACE
AND RETURN.
FORM get_attachment TABLES p_tab_movimentos STRUCTURE
zlinha_movimentos_fich_retorno
p_contents_bin STRUCTURE contents_bin
USING p_linha_inicial STRUCTURE
zlinha_inicial_ps2
p_linha_final STRUCTURE
zlinha_final_ps2.
DATA: lv_valor(14).
DATA : line(80) TYPE x.
CONCATENATE p_linha_inicial-referencia p_linha_inicial-tipo_registo
p_linha_inicial-tipo_operacao p_linha_inicial-situacao_conta
p_linha_inicial-situacao_registo p_linha_inicial-iban+4(21)
p_linha_inicial-moeda p_linha_inicial-data_pag
p_linha_inicial-ref_ordenante p_linha_inicial-filler
INTO p_contents_bin-line.
CLEAR line.
conv_bin p_contents_bin-line line.
MOVE line TO p_contents_bin-line.
APPEND p_contents_bin.
CLEAR p_contents_bin.
LOOP AT p_tab_movimentos.
CLEAR: lv_valor.
WRITE p_tab_movimentos-montante TO lv_valor.
PERFORM normalize_value USING lv_valor.
CONCATENATE p_tab_movimentos-referencia
p_tab_movimentos-tipo_registo p_tab_movimentos-tipo_operacao
p_tab_movimentos-sit_conta_retor p_tab_movimentos-situacao_registo
p_tab_movimentos-nib lv_valor
p_tab_movimentos-ref_ordenante p_tab_movimentos-filler
INTO p_contents_bin-line.
CLEAR line.
conv_bin p_contents_bin-line line.
MOVE line TO p_contents_bin-line.
APPEND p_contents_bin.
CLEAR p_contents_bin.
ENDLOOP.
CLEAR: lv_valor.
WRITE p_linha_final-mont_total TO lv_valor.
PERFORM normalize_value USING lv_valor.
CONCATENATE p_linha_final-referencia p_linha_final-tipo_registo
p_linha_final-tipo_operacao p_linha_final-filler_1
p_linha_final-situacao_registo p_linha_final-filler_2
p_linha_final-total_reg lv_valor
p_linha_final-filler INTO p_contents_bin-line.
CLEAR line.
conv_bin p_contents_bin-line line.
MOVE line TO p_contents_bin-line.
APPEND p_contents_bin.
CLEAR p_contents_bin.
ENDFORM. " get_attachmentHi,
I've solved this problem. The problem was because i was using the
* Anexo - Descrição
packing_list-transf_bin = 'X'.
packing_list-head_start = 1. "Here it must be 0 because i wasn't using any table header
packing_list-head_num = 0.
ADD 1 TO tab_lines.
packing_list-body_start = 1.
CLEAR: lv_filename, tab_lines.
CONCATENATE nome_ficheiro 'TB' INTO lv_filename.
* CONCATENATE 'Fich Retorno -' nome_ficheiro INTO lv_filename.
DESCRIBE TABLE contents_bin LINES tab_lines.
packing_list-doc_type = 'TXT'.
packing_list-obj_descr = lv_filename."'Ficheiro Retorno'.
packing_list-obj_name = lv_filename.
packing_list-body_num = tab_lines.
packing_list-doc_size = tab_lines * 255.
APPEND packing_list.
Best Regards
Thanks,
João Martins -
Problems sending mail with my internet connection through my iphone
HI all,
right now i'm having problems, i can't send a email with my outlook for mac through my iphone connection... but i can receive emails with the same connection... any ideas?Hi,
I've solved this problem. The problem was because i was using the
* Anexo - Descrição
packing_list-transf_bin = 'X'.
packing_list-head_start = 1. "Here it must be 0 because i wasn't using any table header
packing_list-head_num = 0.
ADD 1 TO tab_lines.
packing_list-body_start = 1.
CLEAR: lv_filename, tab_lines.
CONCATENATE nome_ficheiro 'TB' INTO lv_filename.
* CONCATENATE 'Fich Retorno -' nome_ficheiro INTO lv_filename.
DESCRIBE TABLE contents_bin LINES tab_lines.
packing_list-doc_type = 'TXT'.
packing_list-obj_descr = lv_filename."'Ficheiro Retorno'.
packing_list-obj_name = lv_filename.
packing_list-body_num = tab_lines.
packing_list-doc_size = tab_lines * 255.
APPEND packing_list.
Best Regards
Thanks,
João Martins -
Problem sending mail with Gmail POP
A few days ago I began having trouble sending email through mail in my gmail account. (hope you got that) I checked my gmail account online and saw theat eventhough I got an :unable to deliver mail, please try another account message" from Mail, the message was sent according to gmail.
I went into my account settings and saw that my port was changed from 587 to 25. So i changed it back, I also noticed that my username was not how gmail had it listed, so i changed both and now i still get that message but the emails are getting sent according to gmail.
please helpI just began experiencing the same problem. I attempted deleting the pref's file and all other corresponding mail files out of my library to no avail.
Oddly, I can't seem to send out any other SMTP server either. -
Problems sending mail with 10.6? Just came across a Tech Note:
I haven't had issues but this may be helpful:
http://support.apple.com/kb/TS2998I am sure an Apple document detaling the setup will be released shortly ...
I'm not so sure I'd count on that. Apple wants you to purchase Lion, not tinker around with SL.
Anyhow, it isn't exactly a BUG, but more of.... (insert engineering excuse here)
This is as good a document as you are going to get:
iCloud: Mail server information
http://support.apple.com/kb/HT4864 -
Problem sending attachements with gmail account on mail
Hello:
I have a lot of problems sending attachments with my gmail account using mail.
1. Attachments are not big.
2. I don't have the same problem with other non gmail accounts.
3. When ever I have this problem I go to gamil.com and I am able to send the attachment with no problem.
Any suggestions?
ThanksNo idea ?
Nemrod -
I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion and on both my MacPro and my wife's Imac. I also see my mailboxes randomly disconnecting and reconnecting. Any other ideas of a possible cause?
I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B. -
Problem in sending mail with attachment
Hi All,
I am using the function module <b>'SO_NEW_DOCUMENT_ATT_SEND_API1'</b> to send mail with attachment.
the program executes properly and shows a message <b>'Document Sent'</b>. But neither the sent mail appears in <b>'SOST'</b> nor I get it on the specified email id.
Below is my code:
<b>***</b> As attachment I am sending resume whose contents are stored in table 'ZResume' corresponding to personnel no.(pernr) and serial No.(srno).
<b>START OF PROGRAM</b>----
REPORT ZPTEST_SEND_MAIL_ATTATCHMENT.
DATA : w_name TYPE sos04-l_adr_name.
DATA: RESUME TYPE table of XSTRING with header line.
START-OF-SELECTION.
<b>* Data Declaration</b>
DATA:
l_datum(10),
ls_docdata TYPE sodocchgi1,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
lt_listobject TYPE TABLE OF abaplist WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
SELECT SINGLE RESUME FROM ZRESUME INTO RESUME
WHERE PERNR EQ '00001182'
AND SRNO EQ '1'.
APPEND RESUME.
<b>* Because RESUME may be of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy</b>
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = resume
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error in function module &1
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
<b>* Create the message and send the document.
Create Message Body</b>
<b>* Title and Description</b>
ls_docdata-obj_name = 'Resume'.
ls_docdata-obj_descr = 'Resume'.
<b>* Main Text</b>
lt_objtxt = 'Resume of the candidate' .
APPEND lt_objtxt.
<b>* Write Packing List (Main)</b>
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
<b>* Create Message Attachment
Write Packing List (Attachment)</b>
l_att_type = 'ALI'.
DESCRIBE TABLE lt_objbin LINES l_tab_lines.
READ TABLE lt_objbin INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objbin ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'Resume'.
APPEND lt_objpack.
<b>* Create receiver list</b>
lt_reclist-receiver = '[email protected]'.
lt_reclist-rec_type = 'U'.
APPEND lt_reclist.
<b>* Send Message</b>
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_docdata
put_in_outbox = ''
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
Document sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH ls_docdata-obj_name.
ENDIF.
<b>END OF PROGRAM</b>----
Can anybody tell me where I am making mistake?
Thanks in advance,
PragyaHi Pragya,
Refer the code below. It's working fine and try to match up the things from your program.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra -
Problem in Sending mail with attachment (Excel sheet)
Hi
Iam using this FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mail with an attachment (excel sheet).
the application is running fine , mail is going to other system . but the excel sheet attachment contain only few rows not all.
and the body of the mail is not displaying .
Can any one help me. Thanks in advance.Hi,
you can use cl_bcs classes for the same. I am using below code for same thng
CONSTANTS:c_tab TYPE c VALUE cl_bcs_convert=>gc_tab.
CONSTANTS:c_crlf TYPE c VALUE cl_bcs_convert=>gc_crlf.
DATA o_send_request TYPE REF TO cl_bcs.
DATA o_document TYPE REF TO cl_document_bcs.
DATA o_recipient TYPE REF TO if_recipient_bcs.
DATA o_bcs_exception TYPE REF TO cx_bcs.
TRY.
o_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = is_mail_text
i_subject = text-005 ).
ENDTRY.
*create file header
CONCATENATE
text-h00 c_tab text-h01 c_tab text-h02 c_tab text-h03 c_tab text-h04 c_tab
text-h52 c_tab text-h05 c_tab text-h06 c_tab text-h07 c_tab text-h08 c_tab text-h09 c_tab
c_crlf INTO w_data_string.
Loop at itab which contains data to be send as attachment
concatenate field1 field2 field3 c_crlf into your_string separated by c_tab
conatenate final string your_string into final_string.
endloop.
*Convert data into suitable excel format
TRY.
CALL METHOD cl_bcs_convert=>string_to_solix
EXPORTING
iv_string = w_data_string
iv_codepage = '4103'
iv_add_bom = 'X'
IMPORTING
et_solix = w_binary_content.
CATCH cx_bcs INTO o_bcs_exception.
IF o_bcs_exception IS NOT INITIAL.
w_exec_txt = o_bcs_exception->get_text( ).
MESSAGE w_exec_txt TYPE 'S'.
ENDIF.
ENDTRY.
add the spread sheet as attachment to document object
CONCATENATE text-006 sy-datum INTO w_attach_name SEPARATED BY space.
o_document->add_attachment(
i_attachment_type = 'xls'
i_attachment_subject = w_attach_name
i_att_content_hex = w_binary_content ).
*create persistent send request
o_send_request = cl_bcs=>create_persistent( ).
add document object to send request
o_send_request->set_document( o_document ).
create recipient object for external mail id
w_mlrec = iw_recipent.
TRY.
o_recipient = cl_distributionlist_bcs=>getu_persistent(
i_dliname = w_mlrec
i_private = space ).
CATCH cx_bcs INTO o_bcs_exception.
IF o_bcs_exception IS NOT INITIAL.
w_exec_txt = o_bcs_exception->get_text( ).
MESSAGE w_exec_txt TYPE 'S'.
ENDIF.
ENDTRY.
add recipient object to send request
o_send_request->add_recipient( o_recipient ).
---------- send document ---------------------------------------
w_sent_to_all = o_send_request->send( i_with_error_screen = 'X' ).
IF w_sent_to_all EQ abap_true.
COMMIT WORK.
ENDIF.
Maybe you are looking for
-
Calling web service from Obiee
Hi, I want to get data from webservice and show the results in a dashboard. I checked http://www.artofbi.com/index.php/2009/08/consuming-a-web-service-in-obiee-presentation-services-using-jquery-cdn/ web site. But the author is retrieving data from a
-
Why is skype the worst program I have ever laid my...
This program is such a **bleep**ing joke. Every single time skype updates it does the exact opposite of "improving my experience". I have no idea how my favorite messenger program has morphed into this peice of absolute garbage that I'm dealing with
-
Problem with 'Edit Locally' command -- Due to IISProxy?
Hi, We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is: SAP EP 6.0 SP2 Patch 28 (Solaris) IIS Proxy (Windows 2003) The situation is: If we access to SAP Portal using old url (directly to Solar
-
I am new to ABAP. I tried creating abstract class and found that class builder allows development of abstract final class. What is the use of such class in ABAP?
-
Cannot display japanese font/character in WTK22
Hi guys, I followed this http://www.devarticles.com/c/a/Java/J2ME_and_Unicode/ instructions but I stil cannot display the japanese character on the screen both with eclipe and wtk22. What seems to be missing with my application? Do I have to install