Problem sensitivity of the screen on Nokia 1520
I'm very disappointed with the problem of Nokia 1520 screen sensitivity. I will never again rely on Nokia.
They expect to fix the problem with an update. Nothing more. Thank you
sorry to hear the problems you are having. i assume you have checked and installed the latest firmware for your device. have you also installed the latest Nokia system app updates from the Store, and performed a soft reset?
Similar Messages
-
Problems with software the update with Nokia 6233
Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AMIt sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
I have an iphone 4 and i'm having lot of problems:
_ my back camera is blurred although my front camera is fine and working normally
_ my biggest problem is that the screen is showing colored horizontal lines(as perhaps electrical problems). The phone did fell and I already changed its back and front but everything was normal until these problems appeared suddenly
Please can somebody help me to solve it and tell me what are the reasons?
Thxyou can try turning it off and on again, but i doubt that's gonna work, that sounds like more of a hardware issue. Your best bet may be to contact apple and seek service or replacement
-
I am physically disabled and having trouble selecting apps because of the sensitivity of the screen - any suggestions on what to do?
I would think assistive touch would be exactly what you are looking for. It's engaged using the Accessibility method I described above.
Here's the writeup about assistive touch from the iPad User Guide:
AssistiveTouch AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing the buttons. You can use a compatible adaptive accessory (such as a joystick) together with AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform gestures that are difficult for you.
Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
Adjust the tracking speed (with accessory attached): Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
Show or hide the AssistiveTouch menu: Click the secondary button on your accessory.
Hide the menu button (with accessory attached): Go to Settings > General > Accessibility >
AssistiveTouch > Always Show Menu.
Perform a swipe or drag that uses 2, 3, 4, or 5 fingers: Tap the menu button, tap Gestures, and then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, flick or drag in the direction required by the gesture. When you finish, tap the menu button.
Perform a pinch gesture: Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button.
Create your own gesture: Tap the menu button, tap Favorites, and then tap an empty gesture placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad: Tap the menu button, then tap Device.
Simulate pressing the Home button: Tap the menu button, then tap Home. Move the menu button: Drag it to any location on the screen.
Exit a menu without performing a gesture: Tap anywhere outside the menu. -
my iphone 4 will not charge in the plug or connect to my laptop but my ipod 4th gen does. what could the problem be because the screen to show it needs charging will not come up and it will not restart by holding the home button and lock button. thanks
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W -
is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.
If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
How to Remove Jar File name from the screen of nokia 40 series
hi
i have the problem with running midlet.
the jar file jame is always visible on the screen, how to remove that ?>
Prasanna Kumar wrote:
> Hi ALL
>
> I am using file adapter and I what to create file name dynamically by acesssing PO number and time stamp from the payload using variable substution.
> But the problem is I am getting ":" in time stamp field value and it is not acceptable for file name .
> So could you please tell me a way that I can remove this ":" from that particular field value and create the file name dynamically.
>
> Note 1)Add Time stamp option will not help me as we require a time stamp of particular zone.
> 2) Dynamic Configuration code is also not use full as I am using 1:n file creation
does the time stamp with the ":" a part of your output file?
else use a replaceAll function in your mapping and replace the : with empty string then use the value in the variable substitution
Another option is use the normal BPM for 1: N message flow. The use a simple java mapping that will introduce a dynamic configuration and you can create the file name as you want. the java mapping will be used in the flow of messages from BPM to target system.
ref: /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name -
Problem in playing the 3GP in Nokia 6600 mobile...
Hi,
I am developing application with MMAPI. I want to play the video file saved in 3GP. It is not supported by the emulator. So i am directly checking with the Nokia 6600. The video is not visible on the screen. Any one please help in this topic. The file size very is small. My coding is as follows:
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import javax.microedition.media.*;
import javax.microedition.media.control.*;
import java.io.*;
public class PlayVideo extends MIDlet
private Display display;
private MyCanvas canvas;
private Player player;
private VolumeControl vc;
private InputStream is;
private VideoControl vdc;
private HttpConnection connection;
private ContentConnection c = null;
private DataInputStream dis = null;
public PlayVideo()
display = Display.getDisplay(this);
canvas = new MyCanvas(this);
protected void startApp()
display.setCurrent(canvas);
canvas.setFullScreenMode(true);
protected void pauseApp()
protected void destroyApp(boolean unconditional)
class MyCanvas extends Canvas
private PlayVideo playVideo;
private int Xposition = 0, Yposition = 0, volume = 30, keyValue = 0, width = 30, count = 0, run = 0, barWidth = 0;
private int videoCount = 0, delay = 0, keyValueCopy = 0;
private long[] barValue = new long[100];
private long mediaDuration = 0, totalDuration = 0, temp = 0, newDuration = 0, startDuration = 0, firstDuration = 0;
private String error, fileFormat = null, filename = null;
private Image upImage, downImage;
private boolean isPause = true, isMute = false, isOptionTwo = false, isOptionThree = false, isRewindMode = false, isForwardMode = false;
private boolean isHTTP = false, isOptionFour = false, isOptionFive = false, isRunning = false, isError = false;
public MyCanvas(PlayVideo playVideo)
this.playVideo = playVideo;
/* try
upImage = Image.createImage("/up_arrow.png");
downImage = Image.createImage("/dn_arrow.png");
catch(Exception error)
System.out.println("Error is = "+error);
// thread.start();
public void setMute() //Setting sound in Mute
try
vc = (VolumeControl) player.getControl("VolumeControl");
vc.setMute(true);
catch (Exception e)
System.out.println("Error in setMute() = "+e);
public void setUnmute() //Setting sound to ReMute
try
vc = (VolumeControl) player.getControl("VolumeControl");
vc.setMute(false);
catch (Exception e)
System.out.println("Error in setUnmute() = "+e);
public void playVideoFile(Graphics graphics) //Playing video file from the local path
try
filename = "02.3gp";
fileFormat = TypeOfFile(filename);
fileFormat = "video/" + fileFormat;
is = getClass().getResourceAsStream(filename);// To play given file from jar file
player = Manager.createPlayer(is, fileFormat);
player.realize();
vdc = (VideoControl) player.getControl("VideoControl");
if(vdc != null)
vdc.initDisplayMode(VideoControl.USE_DIRECT_VIDEO, this);
vdc.setDisplayLocation(5, 25); //Setting location for video
vdc.setVisible(true); //Setting visible
player.start(); //Start playing
graphics.drawString("Now playing . . .", 5, getHeight()-24, Graphics.LEFT | Graphics.BASELINE);
catch(Exception e)
error = "Error: "+e;
graphics.drawString(error, 5, getHeight()-24, Graphics.LEFT | Graphics.BASELINE);
public String TypeOfFile(String filename)
String filetype = null;
filename = filename.toLowerCase();
int positionFrom = filename.indexOf(".") + 1;
int positionTo = filename.length();
String extension = filename.substring(positionFrom, positionTo); //Splitting the string
if (extension.equals("mpg"))
filetype = "mpeg";
else if (extension.equals("mp3"))
filetype = "mp3";
else if (extension.equals("mp4"))
filetype = "mp4";
else if (extension.equals("3gp"))
filetype = "3gpp";
else if (extension.equals("aac"))
filetype = "aac";
else if (extension.equals("wma"))
filetype = "x-ms-wma";
else if (extension.equals("mpeg4"))
filetype = "mpeg4";
else if (extension.equals("gif"))
filetype = "gif";
else if (extension.equals("jts"))
filetype = "x-tone-seq";
else if (extension.equals("wav"))
filetype = "x-wav";
else if (extension.equals("au"))
filetype = "x-au";
else if (extension.equals("amr"))
filetype = "x-amr";
else if (extension.equals("awb"))
filetype = "amr-wb";
else if (extension.equals("mid"))
filetype = "midi";
return filetype;
public void paint(Graphics graphics)
if(keyValue == 51)
playVideoFile(graphics);
public void keyPressed(int keyCode)
keyValue = keyCode;
switch(keyCode)
case 51:
repaint();
break;
case 35://Exit from the application
destroyApp(true);
notifyDestroyed();
break;
}// end of Canvas
}// end of MIDLETRegards,
G.DhanalakashmiHi,
I am trying to install the Oracle Lite suit versioned 5.0.2 for Windows. The RDBMS is Oralce 9i (9.2.0.1). I am able to install the Mobile server. Refering the Installation mannual I am trying to configure and run the mobile serve in either standalone mode or with Oracle HTTP server. In the installation mannual it is mentioned that the HTTPD.conf file for apache http server should be modified to include the wtgapach.conf file from the Oralce Lite ORACLE_HOME\mobile\server\bin folder. On making this change and starting the apache server I am getting the error listed in the post. In the mannual it is mentioned that for standalone mode run the webtogo executable from the bin folder. On doing so I am getting a message
"D:\oracle\oralite\Mobile\Server\bin>webtogo
Unrecognized option: -Xrs"
So currently I am stuck and do not know how to start the mobile server. Please let me know the appropriate steps to start the Mobile server in stadalone as well as with Oracle HTTP server.
Also as mentioned by you I replaced the wtgapach.conf with wtgias.conf. The warning message which was displaying earlier on start of Apache is now gone but if tried to start the mobile server from the browser it is not working as expected.
Thanks and Regards,
Sachin. -
Ipad mini screen is frozen. Message says Not Enough Storage. Cannot be backed up ect. problem is I can not enter settings to manage storage or even turn the device off. the screen is frozen and will not allow me to do anything. Anyone got any ideas?
OMG!! Thank you, Thank you, Thank you! I did what you suggested and it worked! I know nothing about this stuff. You made my day!
-
A serious Problem occured on the screen of my 3gs!!!!!!
I bought my 3gs about 1 month ago.At first,I got good experience and learned the meaning of 's'.But then I found a serious problem.It happens ONLY JUST the moment I reopen the screen if I used the screen for a while.About 3 mm near to the edge of the screen it would appear some green lines(a small green square in the screen).I think this might be sometihing like afterimages.The longer I used the screen,the loooooooooonger the green lines will be.The most strange thing is if I don't use the screen for about more than 1 hour,it will turn back to normal.But after about 1 or 2 min it is bad again!
When I am using the screen not open the screen it acts as normal one's,everything is good.
Could any guy tell me the reason of this phenomenon?
Firmware:iPhone OS 3.1.2You can try the basics from the manual:
Restart, reset, restore.
If this doesn't help then you can take it to the Apple Store, or whomever provides service in your country and they will replace is it is defective. -
Problem reading from the screen of Adobe Reader XI
Hi,
Since I installed Adobe Reader XI, I cannot no more reading the documents from the screen. Here is what I see:
I get this message from Adobe:
I'm following the above instruction I don't see any such option as "Enable Protected Mode".
I'm not sure even if this is the cause of the above problem.
Please help,
ChananYour top image seems to indicate you may have a computer virus on your system. I highly recommend you run a virus checking program on your computer, download the latest virus definitions and hope that they can remove the infection.
-
When I take my finger tip near the scree (specially the icon "newsstand" or "notes" or "settigs") its automatically open that without even touch. This is too anoying. Sometimes even I click on "Safari" it open "newsstand". What could be the reason?
I have reset all the settings. But it did not help at all.- Make sure the screen and fingers are clean
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Problem outputting to the screen using FileDescriptor.out
I have the following program that reads prime numbers from a binary file. The issue is that the numbers are not printing to the screen using
FormatWriter out = new FormatWriter(
new BufferedWriter(
new FileWriter(FileDescriptor.out)));The numbers are being read from the file as if I unblock the line
// System.out.println(primes[j]); the numbers are printed to the screen.
I have pasted the code below and the code that creates the prime numbers file.
Thanks for any help.
package readprimes;
import java.io.*;
public class ReadPrimes {
public static void main(String[] args) {
File myPrimes;
DataInputStream primesIn;
try{
String directory = "C:/JunkData";
String fileName = "Prime.bin";
myPrimes = new File(directory, fileName);
primesIn = new DataInputStream(new FileInputStream(myPrimes));
catch(FileNotFoundException e){
return;
catch(IOException e){
return;
FormatWriter out = new FormatWriter(
new BufferedWriter(
new FileWriter(FileDescriptor.out)));
long[] primes = new long[6];
boolean EOF = false;
while(!EOF){
int index = 0;
try{
for(index = 0; index < primes.length; index++)
primes[index] = primesIn.readLong();
catch(IOException e){
return;
// catch(EOFException e){
// EOF = true;
for(int j = 0;j < index; j++){
// System.out.println(primes[j]);
out.print(primes[j]);
out.println();
out.close();
package readprimes;
import java.io.PrintWriter;
import java.io.*;
public class FormatWriter extends PrintWriter{
private int width = 10;
public FormatWriter(Writer output){
super(output);
public FormatWriter(Writer output, int width){
super(output);
this.width = width;
public FormatWriter(Writer output, boolean autoflush){
super(output, autoflush);
public FormatWriter(Writer output, boolean autoflush, int width){
super(output, autoflush);
this.width = width;
Class that creates the prime number file
package bufferedoutput;
import java.io.*;
public class TryPrimesOutput {
public static void main(String[] args) {
long[] primes = new long[200];
primes[0] = 2;
primes[1] = 3;
int count = 2;
long number = 5;
outer:
for(; count < primes.length; number +=2L)
long limit = (long)Math.ceil(Math.sqrt((double)number));
for(int i = 1; i <count && primes<= limit; i++)
if(number%primes[i]==0)
continue outer;
primes[count++] = number;
try
String dirName = "c:\\JunkData";
String fileName = "Prime.bin";
File myPrimeDir = new File(dirName);
if(!myPrimeDir.exists())
myPrimeDir.mkdir();
else
if(!myPrimeDir.isDirectory())
System.err.println();
return;
File primesFile = new File(myPrimeDir, fileName);
primesFile.createNewFile();
DataOutputStream primesStream = new DataOutputStream(
new BufferedOutputStream(
new FileOutputStream(primesFile)));
for(int i = 0; i <primes.length;i++)
primesStream.writeLong(primes[i]);
primesStream.close();
catch(IOException e){
System.out.println("IOExcetoptj");Indeed. It isn't obvious to me what the result of new FileWriter(FileDescriptor.out) would result in, but your test appears to show that it doesn't result in something which can be used to output to the console.
-
I've got the problem about sharing the screen
Hi, i bought iMac 21.5 (Late 2013), i'v upgraded it to the Mavericks. I've got the problem about sharing the display, i have thunderbolt to hdmi adapter and while i plug it to my TV, it doesn't work, it has no signal on TV, can someone help me ?? Thank Yo
Hello Gukakila
Start your troubleshooting with the article below. Try out the cable on a different tv or monitor to see if it shows up there. You may also need to reset the SMC and Parameter Ram.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G. -
Problem in Hiding the Screen Elements in CRMD_ORDER
Dear Experts,
I am working in SAP CRM 5.0 Implementation project.
My client Do not want all the elements in the Transaction code 'CRMD_ORDER'.I would like to hide Some fields.Is there any BAdI to Hide the
Transaction Data Tab and also I want to hide some fields in Item Details Tab.
Please help me is there any BAdI or any other way to achieve my Requirement.It is very Urgent.Please Help me.
Thanks & Regards,
Ashok.Hi,
You can follow any one of the following approaches:
1. Use the screen variant transaction SHD0 to create the transaction variant and assign your own screen variants. The screen variants can be used to hide the fields/tabs as per your requirements. Assign the transaction variant to the specific transaction types. You can maintain different transaction variants for different transaction types.
2. Use the BAdI CRM_ORDER_FIELDCHECK to modify the field status from modifiable to display only. However, this can not be used to hide any particular field/ tab.
Regards,
Kaushik
Maybe you are looking for
-
How to configurel advance payment to vendor in cash journal
Hi, This is thiyagarajan, My client wants to pay the advance to vendors through cash journal How to configure this one . its urgent please help me out.. if u have any document pls send to my mail id [email protected] Regards Thiyagarajan...... 91-
-
Why do my iTunes purchases appear and disappear?
I have no experience with iCloud, and it confuses me greatly. A year ago when I got my first iPhone, songs I purchased on iTunes would randomly fade in and out; when this happened, I was able to physically see the songs with a little cloud next to th
-
How can I report an exemption case for warranty?
I purchsed my 27 inch Imac in Panama (I live in Colombia) and it suddenly started to sound extrange (fans) I re-started it and the weird sound stopped, but the lower left side of the display is darker now. This happened some months ago but I just co
-
Cost-effective, fast, B&W, network printer
hi all... i am from india and i want a printer of above description for my daily usage of more than 150 pages... plz suggest... thanks
-
IPhoto 9.4 - can't assign keywords to a movie?
After upgrading iPhoto to v 9.4, I can no longer tag video files with keywords. This is for newly imported videos, as well as videos that were in my Library prior to upgrading. I'm not having any problems assigning keywords to photos. Anyone else see