Problem setting up DVD or CD Sharing Setup - newer version already exists??

Dudes,
Just trying to set up install DVD or CD Sharing Setup on my MacBook so I can use Remote Disc on the Air, but have got this message on the Select A Destination screen:
"You cannot install DVD or CD Sharing Setup on this volume. A newer version of this software already exists on this volume."
I don't understand, as I have not installed this software yet. How can a newer version of it already exists on my MacBook?
The only thing I can think is that perhaps they included it as standard in 10.5.6, which I have on my MacBook?
Can anyone help at all?
Thanks!
Johnnycakes

That software is bundled with the current Mac OS X version. Proceed as if it was already installed.
(40654)

Similar Messages

How can you install the DVD or CD Sharing Setup software?

How can you install the DVD or CD Sharing Setup software for a computer running MAC OSX 10.4.11 if you do not have a MacBook Air?

You'll find the software you're looking for here:
http://www.apple.com/support/downloads/dvdorcdsharingsetupupdateformac.html
However, say for example you install this on your iMac G4 or Windows XP PC (you'll need to get the link for that one yourself), are you planning to try to share the drive with an iBook or other non-MacBook Air computer? If this is your case, I'm not shure if it can be done with that software. I'll need to get back to you on that one.

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

TS5249 Problems with the Korg Legacy Collection in the new version of Garageband in Mavericks.

Hello!
I'm having problems with the Korg Legacy Collection in the new version of Garageband in Mavericks. When I try to load the AU, I get this error message:
"Failed to load Audio Unit, please contact the manufacturer for an updated version or further assistance. (-10110)"
They seem to work fine in Ableton Live 8 Lite, also running in Mavericks. So, I think it is something with Garageband. In addition, Korg updated to 64bit early last year.
Anyone know how to fix the problem? Or is Korg or Apple's problem?
Thanks.

They seem to work fine in Ableton Live 8 Lite, also running in Mavericks. So, I think it is something with Garageband. In addition, Korg updated to 64bit early last year.
Have you checked, if you have the newest 64-bit version installed? There may still be an older version sitting around - check both plug-in folders, the one in your Home folder and the one in the system library:
~/Library/Audio/Plug-Ins/
/Library/Audio/Plug-Ins/
Some programs may still be able to use 64-bit plug-ins, but GarageBand will not use them: http://support.apple.com/kb/TS5249

Plz hlep my : iso 7 4s /There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz hlep me
<Personal Information Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz plz plz hlep me
<Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

DVD or CD Sharing Setup Update for Mac

Hi
I installed the DVD or CD Sharing utility that comes on the MacBook Air installation DVD on Tiger. Is there any way that my other iBook G4 (running OS 10.4.11 as well) can see the shared drive on my network? Is Leopard the only version that can see the shared drive?

That's exactly the software I installed.
You see, I'm trying to make a backup of the second iBook. This other iBook has a combo drive and I would like to use the superdrive of the computer where I installed the software so that I may use DVD-Rs rather than way too many CD-Rs. I know the software works since it's Apple's own and I do get to turn on the drive sharing in the System Preferences panel. However, I can't get the other Mac (the one without the superdrive) to see the shared drive on the network.
Am I missing something? Is there anything else I need to do before I can see the drive on the network?

Family sharing add kid with already exists icloud account

I want to add my daughter. She is only 5, but i already create her an iCloud account even if she is always offline.
So if i want to add her in the family sharing, she's considered as an adult...
and if i want to create a "child" account from my iPhone, with an iCloud mail it's not possible because her iCloud's account already existe...
how can i do,
must i create an other mail (i don't want to, if possible) ?
Thank you

Hello,
you would have to edit her birth date, even if it is not possible right now to change it to her real birth date, but you could change it to 1/1/2001 which would consider her as child: http://appleid.apple.com
Best regards.

Problems setting up WDS with old AX and new AEBS

Hi all,
after buying a new AEBS last week, I want to put my old AX back into service. Here's what I have planned:
The cable modem sits in the living room near my stereo. The AX should connect to the cable modem and the stereo and be the main station in a WDS network with the AEBS. The AEBS will be in my study as a remote station to the AX.
Sounds trivial, but apparently it isn't I have spent the evening setting up the two base stations again and again. For some reason, the Airport Utility cannot see both stations at once as soon as they are configured. The AEBS won't find the AX even though the MAC address is correct.
I tried with and without WPA/WPA2, but I cannot figure out what's wrong
Could someone please give me a step by step guide of what to do? I am quite desperate by now...
Cheers from Switzerland
Daniel

Well, what can I say... Of course, I could not give up
Finally I got it to work. For future reference, here's how:
I first set up the AEBS to create a network, then used the Wizard of the Airport Utilitiy to add the AX as a WDS-device (it sets up the whole WDS automatically). Then I flipped the settings - set the AX to be main and the AEBS to be the remote.
I also had to adapt the Internet-Settings. Both base stations were set to bridge-mode, which doesn't work in my case because I only get two IPs from my ISP. So, I set the AX (the main) to share an internet connection and get its IP by DHCP. The AEBS on the other hand needed to get an IP manually (outside of the address space of the DHCP server created by the AX, but within its subnet).
After that it all worked - even AirTunes The AEBS now sits on my desk and the AX provides internet from the living room.
Cheers,
Daniel

Problems setting up dual monitors

I am having problems setting up dual monitors on a band new HP envy 700 using windows 8. I just bought this computer and bought DVI to via adapters to use. Everything is hooked up but nothing is happening on the 2nd monitor. Help!

Jaimetech3, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Having problems setting up ntlworld email on ipad 2. Help?

I am having problems setting up my ntlworld email on my new ipad 2. It works ok on my iphone 3. Trying to use the same settings as my iphone but its not setting up.

This should work for all email addresses managed by Virgin Media
          @ntlworld.com
          @blueyonder.co.uk
          @virgin.net
          @virginmedia.com
1. Turn on Settings > Airplane Mode.
2. Open Settings > Mail, Contacts, Calendars.
3. Tap Add Account….
4. From list choose Other.
5. Choose Add Mail Account.
6. In the New Account screen enter customer’s:
          Name (e.g. Johnny Appleseed)
          Email (full email address, e.g. [email protected])
          Password (password for email address)
          Description (this will automatically get filled in, but you can put something more meaningful e.g. ‘NTLWorld Email’)
7. Tap Next.
8. In the next screen ensure IMAP is selected.
9. Enter the following settings:
          Incoming Mail Server (section)
          Host Name imap.virginmedia.com
          User Name (full email address, e.g. [email protected])
          Password (password for email address)
          Outgoing Mail Server (section)
          Host Name smtp.virginmedia.com
          User Name (full email address, e.g. [email protected])
          Password (password for email address)
10. You will get an error that the IMAP server is not responding (Airplane Mode being on); just tap OK.
11. Tap Next.
12. You will get an error that the account may no be able to send or receive emails; tap Save anyway.
13. On next screen turn Notes off and tap Save.
14. The new account should be created; we now need to tweak some settings in it.
15. Tap the new account in the list.
16. On the next screen tap Account.
17. Where is says Outgoing Mail Server tap on SMTP smtp.virginmedia.com >.
18. On the next screen, under Primary Server, tap smtp.virginmedia.com.
19. Ensure the settings are as follows:
          Outgoing Mail Server (section)
          Host Name smtp.virginmedia.com
          User Name (full email address, e.g. [email protected])
          Password (password for email address)
          Use SSL is turned ON
          Authentication Password
          Server Port 465
20. Tap Done.
21. You will get an error that the SMTP server is not responding; just tap OK.
22. Tap Done.
23. You will get an error that the account may no be able to send or receive emails; tap Save anyway.
21. Tap Account to go back one screen.
22. Tap Advanced at the bottom of the screen.
23. At the bottom of the screen ensure the settings are as follows:
          Incoming Mail Server (section)
          Use SSL is turned ON
          Authentication Password
          IMAP Path Prefix is left blank (will show ‘/’)
          Server Port 993
21. Tap Account to go back one screen.
22. Tap Done.
23. You will get an error that the IMAP server is not responding; just tap OK.
24. Tap Done.
25. You will get an error that the account may no be able to send or receive emails; tap Save anyway.
26. Tap Mail… to go back one screen.
27. Tap Settings to go back one screen.
28. Turn Airplane Mode to OFF.
29. Press Home button and open Mail app to check it is now collecting and sending email.

Problem setting up email on new Ipad

I have a problem setting up my email account on my new Ipad. I've checked the settings and password which are entered correctly. The Ipad error message states "Cannot Get Mail" the user name or password for "....." is incorrect. Any ideas please ??

Problem solved. The ipad default is set to IMAP. When I changed it to a POP server, problem solved.

Problem "archive name already exists" Outlook 2007

Dear All,
I’m writing to you because I really need help with solving the problem with my MS Outlook 2007 with SP3.
I’m using windows 7 64 bit. I’m using Exchange account.
The problem is when my mailbox on exchange is almost full so I’m making manual autoarchive.
From a few months I have problem with that matter because I have information “archive name already exists”.
I can see the exact path to the archive folder.
I can't create archive with the same name for example archive.pst, all the time during new archivisation I have to change the name of the archive file like: archive1, archive2, archive3….. Now in my mailbox I have something like
5 archivisation folders :(
Can You help me please with that?
Thank You in advance!

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

HT201401 use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new ve

I use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new version IOS6.
had anyone this problems?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Problem setting up DVD or CD Sharing Setup - newer version already exists??

Similar Messages

Maybe you are looking for