Problem share folder WLC and pc macbookpro

I am doing a migration from my wireless network in the old network in the PC MacBookPro I can see shared files on the network. But when I connect to the SSID configured on the WLC and I can not see shared files on the network. I have no ACL configured on the SSID.

Bonjour is a non-routabe multicast based service. A trick I use sometimes is to configure the WLAN to be in hreap mode if the ap is located locally to the target bonjour device.if your running in local mode, make sure they are on the same vlan and global multicast is enabled.
Sent from Cisco Technical Support iPad App

Similar Messages

  • Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

    Hello to all,
    we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
    Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really  be called a professional productive system at the moment...
    Ok., one thing after the other...here is one of our biggest problems:
    After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
    We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
    Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
    In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
    "Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
    We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
    We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
    We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
    Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
    Thanks in advance
    C.

    Hi William,
    thank you for your response.
    As you can read in my post I talked about CIFS/SMB.
    It makes no difference if we mount the share over CIFS or SMB.
    Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
    As mentioned I believe this is a timeout problem.
    Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
    Kind regards
    C.

  • I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

    i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

    EExactly what settings are you using. Some go to iTunes.

  • Old Pre-Leopard Desktop Folder Lurking and Causing problems

    I'm confused, is this supposed to happen? After wondering where all my downloads had gone, I realized the old desktop was still lurking on my computer. I only realized this because I had changed icons. Under "devices/macintosh hd" there is a desktop folder, the pre-leopard one, the current one doesn't exist there, just the pre-leopard one and the os9 folder. Is that normal? It causes problems sometimes when saving things from the internet or email applications. I have to be careful when choosing the location because saving to desktop will sometimes send it to the old one and the files then don't show up on my actual desktop. They also don't seem to appear in spotlight when this happens. Is there a fix for this? Thanks.
    Message was edited by: texasstar7

    If there's anything in the Desktop folder at the root level (Devices >> Machintosh HD) that you need, save it. Then, drag that folder to the trash. You can also drag the OS 9 folder to the trash. Do not empty the trash yet.
    Restart and launch Safari. From Safari menu choose Preferences >> General and re-choose "Desktop" in "Save downloaded files to". If all is well with your downloads you can empty the trash.
    On the OS 9 when you try to trash it, if the System Folder squawks and tells you it is "owned by the system" just drag the system folder out of the trash, open it, remove "system" file, After a restart the "system" file will delete.
    -mj

  • B1if JDBC connection to a share folder with login and password

    Hi,
    I need to connect to data base using jdbc driver. Data Base is in a share folder. I have an IP address, login and password. How to configure B1if jdbc to connect to this data base? This data base is a DBF file.
    Regards
    Szymon

    Problem solved.

  • Smb and share folder

    Mac lion how to join the smb(server 2003and 2008)  and share folder for other win7 user pc .

    Hello folks!
    Today I found out this phenomenom is a Mac OS X bug!
    Here is my translated Bug report to Apple:
    Today I noticed that the SMB protocol is bad. New created shares and shares on the start up volume disappear in the Finder window.
    I deactivated AFP and activated SMB on my iMac (Mac OS X 10.5.4.). Next I created to shares on the start up volume. When I connected to my iMac via my MBP with Mac OS X 10.5.4 all shares appear in the Finder window. By clicking on a share it opens properly but by clicking on the Back button they disappear!
    So I hope that Apple will fix this because it is very embarrassing when I say that Mac OS X is better than Windows and my collegue - a Windows user - sees that shares suddenly disappearing!
    I wish that Mac OS X has to be the best operating system and Apple really needs to fix that!
    Thank you!

  • I have a problem, I had to reload my hard drive, I didnt erase it, I load xp pro into another folder(windows2) and everything(files) remained in regular(corrupt) windows folder. System32 error came up and corrupt it and it couldnt load the os. I want to

    I have a problem, I had to reload my hard drive, I didnt erase it, I load xp pro into another folder(windows2) and everything remained in regular windows folder. System32 got corrupt and it couldnt load the os. I want to be able to bring my bookmarks over from windows into current windows2, how do I do it.

    See this:
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Trunk with WLC and 1400BR problem

    hi everybody,
    i have the next proble, i hope someone can help me
    Actually I wrok with a 1522 Mesh Network,1130 LWAPP and Bridge 1400 point to point. 1522 and 1130 are asociated with WLC.
    I have a WLC4402 (4.1.192.22M (Mesh)image) this wlc is conected via trunk to Sw3750 ex:
    interface GigabitEthernet1/0/1
    switchport trunk encapsulation dot1q
    switchport mode trunk
    RAP1 is connected to the sameSw3750 ex:
    interface FastEthernet1/0/23
    description RAP1
    switchport access vlan 10
    **(VLAN 10 is Mgmt)**
    AP1(1130) is connected to the same Sw3750 ex:
    interface FastEthernet1/0/1
    description AP1
    switchport access vlan 10
    The 1410BR Root is connected via trunk to same Sw3750 ex:
    interface FastEthernet1/0/19
    description BR-1400R
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 10
    switchport mode trunk
    In the other point is the Non-Root connected to a Sw2960 ex:
    interface GigabitEthernet1/0/1
    switchport trunk native vlan 10
    switchport mode trunk
    AP2(1130) connected to the same Sw2960 ex:
    interface fa0/23
    descriptipon AP2
    switchport access vlan 10
    The network is work fine, Mesh UP (RAP and MAPs), and 1130 too.I connected the 1400 Bridge point after the Mesh is up, and the link between Root and Non Root is UP
    Now, when the Sw3750 goes down or reboot,the RAP and AP1(1130) can't associated to WLC. The ports of RAP and 1130 are down and up many times, so can't associated to a WLC. Only the Bridge point 1400 Root and Non-root are UP, and the AP2(1130) in the other side can associated to the WLC.
    When shutdown the port of the Root Bridge, Now the RAP1 and AP1(1130) can associated to the WLC and the Mesh Net is UP. Then no shutdown the Root Bridge port and the link between Bridges are UP, AP2(1130) up to the controller too.
    But after several minutes the Bridge down, and the event log in the Root is:Interface Dot11Radio0 Radio transmit power out of range.
    So i have this problems
    1) Trunks between WLC and 1400 BR
    2) Bridge conectivity range.
    Regards
    Antonio

    The Outdoor Bridge Range Calculation Utility uses parameters that include regulatory domain, device type, data rate, antenna gain, and a few others as inputs.
    You can avoid connectivity problems with the Outdoor Bridge Calculation Utility, as this tool helps you to predict the distance between devices. In a wireless environment without a tool like this, you cannot predict the distance between the bridges, the height at which you must place the antennas for maximum throughput, and other variables. This utility also helps you decide on the type of antenna that you must use in order to cover the distance between the bridges.

  • Removed a share folder and its contents

    I inadvertantly removed a share folder how can I restore it and all the documents which I believe were not deleted and must still be on the drive

    If you deleted a share, the files are deleted as well.   Only way I know to recover them is to remove the drive from the case and use a Linux data recovery tool. 

  • Is there a way to get an apple mail folder exported to outlook mail folder structure?  I'm using Gmail on my IMAC and have a PC for work.  Want to share folder structure between systems.

    Is there a way to get an apple mail folder exported to outlook mail folder structure?  I'm using Gmail on my IMAC and have a PC for work.  Want to share folder structure between systems.

    Use following steps to import apple mail to outlook:     
    Choose Mailbox->Export Mailbox, or choose Export Mailbox from the Action pop-up menu
    Choose a folder or create a new folder where you want to store the exported mailbox.
    Outlook for Mac: Choose File->Import Mailboxes. Select the mail application you want to import messages from.
    If it does not work then you should use third party apple mail to pst applications. You can easily search in Google about these applications.

  • Integration between WLCS and Documentum WCM Starter  Kit

    Has anybody a successful instalation of WLCS and Documentum WCM Starter Kit?
    If you answer is yes:
    Can you share the files: weblogic.properties, weblogiccommerce.properties
    and set-environment.bat?
    TIA
    Regards
    David

    The WCM Edition Starter Kit will not install the BEA Integration with 3.2
    Commerce Server. One way to solve the problem is to go to the registry key
    HKEY_LOCAL_MACHINE/Software/BEA Systems/BEA Weblogic Commerce Server and
    look for the folder 3.2. Change the folder value from 3.2 to 3.1 after
    installing BEA WebLogic Commerce Server 3.2. Then run the install.
    Solution provided by Carmen M. DaCosta (Documentum Technical Support)
    "David Solis" <[email protected]> wrote in message
    news:[email protected]..
    Has anybody a successful instalation of WLCS and Documentum WCM StarterKit?
    >
    If you answer is yes:
    Can you share the files: weblogic.properties, weblogiccommerce.properties
    and set-environment.bat?
    TIA
    Regards
    David

  • [SOLVED]cannot share folder in home directory with SAMBA

    My problem is relatively small as I can use a workaround but I would like to be able to discern whether or not my troubles  stem from a bug or my own incompetence. 
    Basically it seems I can share just about anything I want EXCEPT for a file or folder in my home directory.  I  have two primary users on my box, root & dunce, and what I am unable to do is share "/home/dunce/shared".  I've tried quite a few different configs based on what I could find online but nothing works.  Initially I followed the SAMBA instrucions on the Arch Wiki and that was fine for other items I wanted to share.  I feel like I'm kinda'   makin' a mountain out of a molehill here but I would really like to understand WHY I can't share from "/home/dunce/shared".  I really don't think it's a problem in smb.conf but then again . . .  Any insight would be greatly appreciated.
    Last edited by Captain Dunce (2011-01-24 07:11:06)

    The option browseable if not defined is per default set to yes.
    Excerpt from The definitive guide to samba 3
    browseable: This parameter determines whether a share appears in browse lists on clients. The default value of YES causes a share to appear and is usually appropriate. You can hide a share by setting this parameter to NO; however, be aware that this setting doesn't make a share unavailable, only hidden from casual browsing.
    Another thing I stumbled upon is that samba can get confused if security=share is used. It will try different usernames until it finds one that can be used, or will deny access if none can be used. The following list is the order it tries to access the share:
    Guest, Client provided username, Prior login, Share name, Client name, User list (if defined).
    You can try to set
    guest ok = yes
    and see if that changes the behaviour. You will need
    guest account = nobody
    or something similar in you global configuration to make this work.
    Whatever user you set as guest need to exist in the samba database. And must be a existing linux username as well.
    Another option is to set the guest account in the share definition and only allow guest access.
    [share]
    path = /home/dunce/sharefolder
    browseable = yes
    writable = yes
    guest account = dunce
    guest ok = yes
    guest only = yes
    Again the username (dunce) need to exist in the samba database. Depending on your setup this can be set with the command pdbedit.
    There is a samba book available online from O'Reilly. It is a bit dated, but the info on shares should still be valid. I think chapter 6 is especially interesting for you in your scenario.
    http://oreilly.com/catalog/samba/chapte … index.html

  • Lion OS Folder Icons and Settings Change

    My new 8 core Mac Pro with Lion arrived August 29 to replace an older Mac Pro with Snow Leopard. FYI - Just before the new Mac Pro arrived, I checked and repaired any permissions issues via the Disk Utility. Once the new Mac arrived, it took four days to finally get things moved over from the main hard drive because of various problems. I held up the transfer from the other 3 drives and am glad that I did. After a bad optical drive was replaced, constant Finder problems have been occurring which appear to revolve around permission conflicts. In essence, the Mac OS on my Mac Pro appears to be schizophrenic and apparently, it is in need of a frontal lobotomy. In reviewing posts in this forum, I was surprised to learn that users have been reporting similiar issues ever since Lion was released. I was given the impression that my complaint about it was the first for the techs who have attempted to resolve the problem.
    I do a large amount of photography using the HDR technique so it is important to arrange image icons in specific groupings and order within folders. We have all gotten used to having icons in the same place or configuration in folders each time we open them. This not only gives us a feeling of consistency but is a critical time save when dealing with images and other graphic files. Unfortunately, because of some overlooked programming issue, the Mac OS Lion is confused as to what permissions it should pay attention do. While working, icon arrangements are constantly changing causing many hours of additional work without let-up. There is also an issue that happens I would call Blinking for no better of a word to use. In certain folders, icons will dissappear then quickly show again. This can happen about every 10 - 14 seconds sometimes.
    I have also noticed related problems with new software upgrades. They work fine at first, then all of a sudden, they do not. Simple slideshows exported to video using Lightroom now appear completely black. In Dreamweaver CS 5.5, I can connect to the ftp server but am not allowed to upload. I am stuck in limbo, not being able to migrate all my work over from the older computer because all folder icon layouts will be destroyed if I start working in them. It has also created licensing issues because now softwares are on two Mac Pros and a laptop. The latest tech support request is to either erase my new startup disk and installing softwares one at a time, or consider installing the more stable Snow Leopard. Has anyone figured out an answer? I have never had such a bad experience with an Apple product in over 20 years. I would highly recommend to professional graphic artists, photographers, or other visual professionals that rely on the consistency of icon views in folders to stay away from Mac OS Lion until the problems have been resolved. Hopefully Apple intends to correct this. It has already taken several months.

    What finally worked for me!
    My internal Mac hard drive is my “filing cabinet” with all folders installed by Lion (Applications, Users, System, and Library) plus my personal folders and data in each visible when I click on and open the harddrive. My internal Mac hard drive icon is on my desktop. After a restart the file and folder icons inside most of the first level of my personal folders would shrink and rearrange themselves.
    After an hour on the phone with Apple Tech Support andt rying a variety of approaches, we finally solved the problem of the shrinking and rearranged icons. (Thank you Manny!!!) This is what finally worked for me and my new MacbookPro 15-inch delivered with Lion already installed.
    BTW I use a mouse….
    Right clicked on the internal hard drive icon on my desktop. (Note: “Out of the box “ when you startup with Lion the first time the Mac Hard Drive probably will not be visible on the desktop and you have to reveal it!)
    In the dialogue box that opened I selected and clicked on “Get Info.”
    A long window opened. We looked at Sharing & Permissions at the very bottom of the window. In the “You have custom access” window my log in name was not there. This was the culprit!!! But the box was grayed out.
    At the lower right hand corner of the long window I clicked on the padlock to open it.
    A dialogue box opened with my user name and asked for my Password. I entered my Password and clicked “OK.”
    The grayed out area of the Sharing & Permissions box immediately darkened.
    I clicked on the plus sign at the bottom left hand corner of the long window.
    A window opened at the top of the long box. I highlighted my name on the right hand side and then clicked on the “Select” button.  My name then appeared in the Sharing & Permissions box at the bottom of the long window.
    To the right of my name un "Privelege" I made sure that “Read & Write” was turned on (use the little arrows.)
    Back to the lower left hand corner and clicked on the gear and when the box opened I clicked on “Apply to enclosed items.”
    Back at the lower right hand corner of long window, clicked on the open padlock to close it and lock the settings.
    In each folder using “Show View Options”dialogue window I resized all the shrunken icons, set the Arrange to by “Name,” anything else I wanted, clicked on “Use as defaults” closed the window and moved on. When I rebooted everything had stabilized!

  • How do I share my itunes and iphoto libraries with other users (accounts) ?

    Hi !
    I am trying to share my itunes and iphoto libraries with other users on my powerbook, but I seem to have problems with it.
    What is the best way to do it?
    Place an alias in my "shared" folder and access this with the applications from the different accounts ? This seems to workt for the itunes library, at least... Or do I have to mess with the righs managent ?
    I dont want screw up my nice mac...
    Thanx for the help in advance.
    Herman
    PB G4   Mac OS X (10.4.6)  

    Hi... and thanx for your help...
    I did not think that I would have to mess with my firewall, as long as I am talking of useres on the same computer, but I guess I was wrong.
    Your advice helps very much, but only as long as I am still logged in with my user name. I does not work when only my kids are logged in. There has to be a way to use these libraries without the need to log in the user that has created those folders...
    Hmmm
    Thanx for your help
    Herman
    PB G4   Mac OS X (10.4.6)  

  • Sharer folder issue between two directly connected PC

    Dear All, I have an issue regarding folder sharing. need your help to resolve this. the scenario is
     two PC's are connected directly to share a folder, to open *.mdb file of a accounting software. this problem start when I moved windows XP PC's and installed windows 7 64 bit PC's. there is no compatibility issue as I run the same software on other
    locations
    PC A (192.168.1.200) has that *.mdb file and PC B (192.168.1.100) has to open this file through a network.
    when I configured the folder share  and network setting, all done well and PC B can connect with PC A and that software work well. After two days, when we start the software at PC B, its not responding when  it try's to open that database file.
    while analyzing, I found out that PC B can open the share folder of PC A but when open the desired database folder explore starts not responding and need to quit it by force. I also tried to share another folder of PC A but results are same.
    PC A run the software with out any problem.
    It seems like network issue, so I check the cable with cable tester, found it good, than I check the connectivity by ping command, it giving me <1ms time. but still change the connectors.
    the hard part is that, this share folder issue arises 3-4 days a week and 2-3 days it works well, and this is happening from last 28 days. I mean, one day we start the the PC B and use the software via network, the next day we start the PC B and we don't
    able to use the software,..strange.
    I also change the cable connection from cross to straight as both new PC's have gigabit Ethernet but results are same.
    I already contact with software company, as per them its network issue as we can use the software on local PC (PC A) and there is no error messages popup.
    please help me out in this regard.
    Thanks Tanveer

    Hi,
    Firstly, we need to identify is this file sharing or netowrking problem. If you can access to the shared folder and modify its files which locate at PC B through PC A, it indicates file sharing works with no problem.
    After that, we need to check if its networking or software itself problem when reading the .mdb file.
    Put the .mdb file at PC A, then using the software open it for test. If no problem, we need to use Process Monitor to capture the access trace of the software process, we should be able to find some clues.
    You can access to the link below to download Process Monitor:
    https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    How to capture a Process Monitor trace:
    http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
    Learning Example:
    Using Process Monitor to Troubleshoot and Find Registry Hacks:
    http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Roger Lu
    TechNet Community Support

Maybe you are looking for