Problem similar to Nvidia 6800GT + AMD64 + Windows XP
Hi there, i seem to be having this problem. The game pauses randomly and hangs, there is also the irritating stuttering that comes out of my speakers.
My system Specs :
AMD64+ 3200
Neo2 Platinium (7025)
NVIDIA GEFORCE4 MX440 with AGP8X
Windows XP without SP2
Soundblaster Live 5.1 (Creative)
2X 256 MB corsair rams
None of my components are overclocked.
I am at my wit's end.
I tried to use the latest Nvidia display drivers and even went over to guru 3d but noting seems to solve the problem.
If anyone can help me, i would definately love that !
Is your problem the notorious Half-Life 2 pause/hang/stutter problem? If it is, then your video card is most likely the cause. I upgraded from a Ti 2 4600 geforce to a 6800 GT and the game runs with none of these problem and the video quality is awesome!
Just for interest why are you not running SP2? It contains a lot of new code to help systems like yours run safer, faster and more stable.
Similar Messages
-
V570 problem with Intel onboard driver on Windows 7 Pro 64 bit
Hello Everyone,
I recently installed Windows 7 Pro 64 bit on my Lenovo v570. I downloaded the drivers from the support page and I have a strange problem with the onboard graphics driver "Intel Onboard Graphics Driver for Microsoft Windows 7 (64-bit) - Lenovo B470, B570, V370, V470, V570" in the drivers section.
Installation seems fine, but after restart, the system fails to boot and goes into boot recovery mode, where I get a message saying that booting failed due to a bad driver and the only actual option I have to boot up is to go back to a previous restore point. I tried installing the Nvidia driver for Windows 7, but it says that I need to install an Intel driver first, which is the one that gives me the blue screen when booting. I have also tried installing both drivers without a restart between both installations, but that didn't help.
I am wondering if anyone in the community has seen something similar. Any advice, information or assistance will be highly appreciated. Thank you very much in advance for your time.
Best regards,
Moe.
Solved!
Go to Solution.Welcome to the Lenovo Community !
Check out the link I have posted below for video driver installation problems on your model. The suggestions offered have worked for others.
http://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/V570-video-drivers-don-t-work-with-Windows...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance. -
Problem starting Repository Browser Service on Windows Server 2008
Using the default Warehouse Builder installation in the 11g (11.1.0.7.0) databaseinstallation on a clean Windows Server 2008 64-bit installation.
Warehouse Builder installed and populated ok, OWB client works fine etc.
When trying to start the Repository Browser listener by running the startOwbbInst.bat, the OC4J container crashes with the following error in the \owb\j2ee\log\oc4j\log.xml:
+<MSG_TEXT>Could not create Secure http listener due to {0}</MSG_TEXT>+
+<SUPPL_DETAIL><![CDATA[java.io.FileNotFoundException: C:\Oracle\product\11.1.0\db_1\owb\bin\admin\..\..\j2ee\config\%ORACLE_HOME%\owb\j2ee\config\keystore.jks (The system cannot find the path specified)+
+ at java.io.FileInputStream.open(Native Method)+
+ at java.io.FileInputStream.<init>(FileInputStream.java:106)+
+ at java.io.FileInputStream.<init>(FileInputStream.java:66)+
+ at oracle.oc4j.security.OC4JSSLSocketFactory.getStoreIn(OC4JSSLSocketFactory.java:253)+
(The local_service_login.bat works fine).
We're starting this as an administrator user in Win2008.
All parameteres in the setowbenv.bat seems to be correct as far as I can tell. There is a strange reference to %ORACLE_HOME% in the above log, of which I've no idea where it is coming from....
Identical installation worked fine on a 64-bit Windows Server 2003, - so can this be something related to a new security model in Windows Server 2008?
(I found a posting regarding problems with the startOwbbInst.bat on Vista [here |http://forums.oracle.com/forums/thread.jspa?messageID=2275781�] - so maybe.... however, the quickfix mentioned there did'nt help us here...)
Anyone experienced similar problems (and preferably solved them) on Windows Server 2008 and/or Vista?
Regards,
-Haakon-Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon- -
Cinelerra problem with video in the composer window
Hi,
After going through many distributions here I am a happy User's Arch.
One thing I feel very lacking in Linux, even more today that I do not use windows at home for anything is the fact that I can not find video editing software that is really good.
As researched a lot and not found anything that is really good in terms of video editing, I believe that it should meet my Cinelerra nescessidade because he in fact work this transaction and videos, etc ... Despite not liking anything on your interface would be able to use it.
If anyone has any tips please help!
The problem is that some crashes are annoying in the Composition window where it plays the video, it's not like I had with 3D acceleration.
And really annoying, I can not do anything without seeing the video in real time as it's getting and the parties must move ...
I tested several software recommended and one that I liked was the Avidemux which unfortunately does not work with multitrack and has no effect. The demics found it very bug. The Pitivi the crash here whenever I zoom in the video track ...
An error that could not noticing this is in red below when I install Cinelerra.
Continuar a instalação? [S/n] s
:: Obtendo pacotes do repositório extra...
ilmbase-1.0.1-1-i686 313,9K 60,4K/s 00:00:05 [######################] 100%
openexr-1.6.1-1-i686 3,3M 256,1K/s 00:00:13 [######################] 100%
verificando a integridade do pacote...
(3/3) verificando conflitos de arquivo [######################] 100%
(1/3) instalando ilmbase [######################] 100%
(2/3) instalando openexr [######################] 100%
(3/3) instalando cinelerra-cv [######################] 100%
Deps Opcionais para cinelerra-cv
libgl: needed for the X11-OPENGL video driver support
My 3D acceleration is enabled, I have a good hardware ...
Proc: Core (TM) 2 Quad CPU Q8200
Distro: Arch Linux i686 + compiz + gnome (in desperation I tried to disable compiz tb and nothing ...)
Motherboard: Asus P5Q
Mem: 4GB
Video: 9800GT
My video card is properly installed, so that the game Counter-Strike Source online with no problem locking or low performace via Wine.
I made a video also likely to demonstrate better to the problem, note the constant locking Composer window.
If I leave the video running too long, it speeds up from nothing and and then starts playing normally, follows:
http://www.youtube.com/watch?v=Fku-juUTmbU
Sorry for bad english
Thanks!
Last edited by cellexpert (2010-10-07 02:12:58)Hi,
I noticed that the problem is related to libgl same.
The NVIDIA drivers make a link to this file sombolico thus
lrwxrwxrwx 1 root root 10 Out 10 20:12 /usr/lib/libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 15 Out 10 20:12 /usr/lib/libGL.so.1 -> libGL.so.256.53
-rwxr-xr-x 1 root root 765460 Out 10 20:12 /usr/lib/libGL.so.256.53
I tried to remove the symbolic link and the program crash when I play the video
I think that's why I can not use other programs that want video acceleration, eg
Pitivi -> lock and close (crash) when I zoom video
Google-Earth -> tb's crash when a dialog will appear (those with balõezinhos info)
There is another that I can not remember now.
I tried using the nvidia driver directly from the site, version 256.53 Geforce 9800 GT
It's the same problem ...
I tried the version contained in the 173 nvidia pacman repositories and it's the same problem.
If someone can give me a help, thank you!
Att -
Hello,
I'd like to know which driver should I use with my NVIDIA Quadro NVS 140M (ThinkPad T61) and Windows 7. I tested a 190.xx version I got @ laptopvideo2go.com, but I was getting random "pops" when listening to my music collection. Running the vanilla (and 3D-disabled) Windows 7 driver, the "pops" went away.
Thanks!
ClaudioHi folks,
Updating my issue: I'm now running a clean Windows 7 x64 installation on my T61, last BIOS update and NVIDIA 190.40. If Aero is running, the random pops while I'm listening to my FLAC files keep coming, but if I disable it, the pops disappear.
I really hope to fix this problem, because I'm loving this Windows version.
Again, thanks for any help!
Claudio -
Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c
I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
1. Background:
We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
2. Problem:
If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
3. Potential solution and its limitation:
1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
2) Use methods like âRestrict WLAN Access based on SSID with WLC and Cisco Secure ACSâ: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
Thanks for any suggestions!I think the documentation for ACS states:
ACS can only support group mapping for users who belong to 500 or fewer Windows groups
I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups. -
Problem with tv@nywhere plus on windows 8
hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.
-
Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.
Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link. -
Problem with the light with bootcamp/windows 7 (64 bits)
Hello there,
After the last windows or bootcamp update, i got a problem with the light of my windows.
I can't adjust it with all methods (windows power or F1/F2).
I don't know how to solved it.
Thanks for your help.I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit
Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en... -
Problems installation Photoshop Elements 8 on Windows 7
I tried to install Photoshop elements 8 on my Windows 7 computer, but the installation gives a failure after a certain time. A file "...cab" is not working and may be corrupt ( exact failure code I can give, if necesary). Is there any possibility to get this file or the program Photoshop Elements 8 as download file so that I can complete the installation? Thank you in advance for your answers.
Hello,
I just got the same problem already some time ago when I tried to install this programm in my computer. At that time (March 2012) the program crashed my computer, I had to reinstall all the Software completely including system software. The program I purchased in December 2011 from Amazon together with a Reflecta crystal Scan slide scanner as bundle, so I thought it will work.
I will try to install the program from the download link you gave me, in case it does not work, what can I do next without having to buy a newer version?
Regards
Franz-Josef Laven
Date: Tue, 6 Nov 2012 14:57:39 -0700
From: [email protected]
To: [email protected]
Subject: Problems installation Photoshop Elements 8 on Windows 7
Re: Problems installation Photoshop Elements 8 on Windows 7 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You can download a fresh copy of the install files by following the directions listed at http://prodesigntools.com/direct-download-links-for-lightroom-3-and-ph otoshop-elements-8.html.
I am curious did you have this installed previously or did you just purchase a copy of Photoshop Elements 8?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4828039#4828039
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4828039#4828039
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4828039#4828039. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Salve , ho un problema con Adobe Photoshop CC su Windows 8.1. Mentre scrivo un testo su un 'immagine non riesco a visualizzare cosa stò digitando. L'immagine sfarfallia , scompare e si normalizza il tutto appena finisco di digitare. Potrebbe essere un problema di scheda video ? Grazie per la risposta
-
I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713) -
Can i install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can i have some problems of compability? I use Windows 7. Thank u...
Generally this should work, but of course there may be occasional compatibility issues across the different programs and their different versions.
Mylenium
Maybe you are looking for
-
Unable start up the Enterprise Manager is not able to connect
Startup/Shutdown:Specify Host and Target Database Credentials Specify the following credentials in order to change the status of the database. Host Credentials Specify the OS user name and password to login to target database machine. * Username
-
[SOLVED] Cannot Compile Pacman 3.5.3
My head is aching at the moment as I have become desperate to compile Pacman. The normal procedure ./configure then make fails with this error (Honest, I can't make out anything, it sound like a libtool problem): make all-recursive make[1]: Entering
-
Error produced when trying to pass variables to a Matlab script
For some reason, LabVIEW produces an Error 1047 (Unable to pass variable to the script server) whenever I create an input variable to a Matlab code block. Outputs work fine (for example, connecting an output "a" to a Matlab code block that says "a=ra
-
HI, can you explain me "how to use the xsl if function" ? My source is an ORDRSP Idoc and i want to use the following. IF E1EDP20 is existing then .... and IF E1EDP20/WMENG = 0 then ... anyway... is there an option to test the xslt mapping with XML s
-
Lenovo G510 windows 8revovery disk
Is there a way to buy or get reovery disk for windows 8 pre-installed for lenovo g510. Please do not tell me that I should have created it, as I have not. I would appreciate help and I have the latptop lying for a month now not knowing what to do