Problem - slow down

Hello,
My Lenovo IdaPad Yog lag when the laptop is in tablet mode. I don't understand.
Anyone could help me ?
Thank you.
Solved!
Go to Solution.

Guys, search for DPTF (Dynamic Platform and Thermal Framework) on the forums. Or just search lag in tablet mode. The answers are here.
But..
You need to disable DPTF in the bios..that will fix your issue for now. Restart in the bios by hitting the small button next to the power button.

Similar Messages

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Problem slowing down Sony FS-700 slow motion video

Now that I've had to use third party software (another topic for another day) to get my slow motion footage onto my computer, I want to slow it down even further. I can shoot 120, 240, 480 or 960 fps on my camera and it lays it down to my card as 60fps video. Obviously, the image quality degrades each time a step up the frame rate while shooting slow motion. My thought is to thak my video shot at 240fps (recorded as 60fps) and place it on a 30fps timelined, thus doubling the slow motion effect, yet keeping the image quality higher and preserving each individual, uniqued frame of video. I've tried several different ways of doing this but I keep getting the same result. When I change the speed to 50% on the timeline, I get the frame blending effect (1 - 12 - 2 - 23 - 3 - 34.) When I turn the frame blending effect off, every other frame is duplicated. In other words, when I click through the video frame by frame, they play like so... 1 - 11 - 2 - 22 -3 - 33. That's a long way to go to say that I need help dropping 60fps video onto a 30fps timeline and preserving each and every complete frame. When I use it in my 30fps project, I will double the slow motion effect while maintaining the higher image quality of the lower setting. I've been editing on FCP for years and I'm sure I'm missing something really simple. Any help would be greatly appreciated.

If the cam output is 60p, convert it to ProRes first, then open up the file in Cinema Tools and conform it to 30p (or 24p).
When played on a 30p (29.97) timeline, the file will play at 1/2 the speed of the 60p original file with all frames intact.
Something to keep in mind - Cinema Tools changes the file you bring in (destructive edit) so don't do this on the original.
Best,
x

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

My screen load times have slowed down to a crawl. I have to wait and wait for a page to load. (I know --dial -up) It used to be much faster a month ago before 5.0. Is it FireFox or do I look to Yahoo for the problem? I don't know how to sort it out.

I use dial-up, FireFox 5.0, Yahoo addition 1.8. My screen load times have slowed down to a crawl. I have to wait and wait for a page to load. (I know --dial -up) It used to be much faster a month ago before 5.0. Is it FireFox or do I look to Yahoo for the problem? I don't know how to sort it out. Using Vista

I'm having the same problem. Dreamweaver is supper slow. Uploading and downloads from the server... any server I use two different servers. It times out all the time. Menus are slow too.
I'm on a MAC Pro, 6 gigs of ram no issues with anything else. I have talked to Apple they have checked everything for me. They say it's Dreamweaver. I've noticed the Dreamweaver is talking to the FTP even when I'm not doing anything.
I've tried cleaning out my MAC caches, turning off file check and check out. Still really slow. I've worked with Dreamweaver for 6 years never any issues like this before. 18 seconds to upload a 4 kb file. 11 seconds to download the same file.

Error code: MobileMe Services has encountered a problem and needs to close - I get this message everytime i open Outlook and it slows down opening? This problem started when itunes updated

Error code: MobileMe Services has encountered a problem and needs to close
I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?

Hi turingtest2 (you pass, BTW): Thanks for the speedy reply. MobileMe doesn't appear in the list of programs which can be uninstalled. I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message: " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]" So googled this error & found a tool called (80072f8f) Repair Tool - I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting?

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?

One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit. ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering. I would suggest you call your ISP's Technical Support and inquire about this possibility.

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

Any security update slow-down problem occuring ???

hi all,
My macbk has slowed to a crawl on the net. connecting from one site to another takes up to 20 seconds. I've done permissions / onyx/ scripts/ reset safari & camino /cleared browser caches and each time it speeds up a bit but within a few minutes online it's slow again. hangs up initially at "looking for..." in the bottom bar and shows highlighted bar hung right before "www". OR at the "go to" / "contacting" stage at the same WWW
The only thing I can think that I did at about the time it began slowing down was , using software update (which I rarely use- normally download directly from the apple site, but got momentarily lazy!).
My Techtool pro is 4.2.1 and won't run on my intel apparently - or so it says in the dialogue box and when I try to download and install the incremental update it says it can't find where to install. so I am stuck with out it at the moment.
If it weren't so rare I would think I had a WORM. but that IS rare on a mac I think.
so thinking about possible linked problems with that security update.
anyone heard of any problems ?
I do have applecare, so if all else fails I can call them I guess
Message was edited by: Sue brown1
Message was edited by: Sue brown1
Message was edited by: Sue brown1

You're Welcome Sue!
I forgot about some of the cool options in the Safari View contextual menu, so thanks to your previous post, I took a look.
I haven't been exploring my system enough lately!
And Thank You, for extending the courtesy, of awarding in  Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
ali b

Touchscreen TV app slows down - caching problem?

We have created an interactive Touchscreen using flash CS4 - http://www.cadstudio.co.nz/client_hlc/home.swf
The Touchscreen is already in the showroom.
Every morning it is restarted.
By midday the whole application slows down to the point were it becomes very slow.
I presume this is a caching problem.
In order to resolve this we close down IE and restart it (playing the SWF file through Internet Explore on full screen mode).
Once it has restarted it plays at the correct speed.
Does any one know of a solution to this problem?
I have thought about setting up windows 7 to reboot IE and have the flash file restart every few hours however a client may be navigating through the
display when it reboots it self. I would prefer to avoid this if possible.
Thanks.

The Touchscreen TV is offsite however i will try and monitor it with that application you sent through.
I have just read that using event listeners may cause the problem.

Program slow down / problem of memory optimization

hi all,
Here is my problem. I am using Labview 2011 and a NI acquisition board. In attachment are simplified VI codes I implemented to acquire analog signal and process the data. The main_VI.vi starts the RUN VI that performs data acquisition and data processing. In the RUN VI, I implemented a state machine because there are many sequential steps. The acquisition is done many times (see max iteration value) and for each acquisition, there is a processing. I used a queue structure to send data for processing in parallel. I also use a in-place element structure to manage the array.
For real data acquisition (from NI board), the program slows down after hundreds of iteration and when I exit the program, it seems the VI has to free memory because it takes few minutes to close the VI.
My questions are:
-       Is the state machine structure properly implemented?
-       Is the queue strategy optimal to do parallel processing?
-       Is the use of in-place element structure properly implemented in my case, and is it needed for 1D array with a size of 4000 to 20000 points?
Thank you for your help/suggestions.
Cedric
Attachments:
Main_VI.vi ‏25 KB
RUN.vi ‏88 KB
acquisitions_data.vi ‏28 KB

Hello Cedric,
I noticed that in your "RUN.vi" you are calling the "acquisitions_data.vi" iteratively in a For Loop. Everytime that For Loop iterates, you are creating the Task, running the acquisition, then closing the Task. You don't need to create and clear the Task over and over again like that. Instead, create and configure the Task outside of the for loop. This way when you get inside the for loop, use the "DAQmx Start Task.vi" to start the task, perform the read using the "DAQmx Read.vi", then use the "DAQmx Stop Task.vi" to stop it. Outside the for loop you can place the "DAQmx Clear task.vi" to clear the references.
Perhaps this will help with your performance.
Mason M
Applications Engineer
National Instruments

Microsoft Excel slowing down and other problems when SAP BPC EPM Add-in is installed

Hello,
Our client is having some problems with Microsoft Excel (MS Office 2013) since the SAP BPC EPM Add-in was installed in their computers.
They are suffering from Microsoft Excel slowing down, even when not connected to SAP BPC (10.0 NW version).
For example, when opening two or more excel archives, not connected to SAP BPC, Microsoft Excel crashes and is restarted with errors.
Have you experienced something similar in other installations?
Thank you very much, and kind regards,

In relation to the previous post , we have to emphasize that we have installed in ours PC's:
MS Office 2010 14.0.7116.5000 32 bit,
EPM add-on version 10.0 SP20 (10.0.0.8993).
and our customer have installed in theirs PC's:
MS Office 2013 15.0.4675.1001 32-bit.
EPM add-on version 10.0 SP19 patch 1 .NET 3.5 compilation 936.
Thank you very much

I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what

I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what and what is the correct procedure? Rick

To determine if it is, boot into Safe Mode and see what happens. http://support.apple.com/kb/HT1455
In the Activity Monitor, what are the Page Outs and Page Ins?

Firefox 4.0 RC has huge memory leak + slow down problem

Firefox 4.0 RC Seems to have a huge memory leak issue. After leaving the program open for around half an hour the RAM usage climbs to over 1 gb.
However, I have 12 gb of physical ram, so firefox staking 1 gb for itself is not too big of a problem (and is probably a blessing as it means it's caching more data), but the problem is that the UI begins to slow down and become clunky after about 30 minutes.
Browsing, switching tabs, even typing becomes jittery and not very responsive.
This happens regardless of how many tabs I have open.
Now it's also crashing every once in a while.

Even with Firefox 4.0 (Release) running in Safe Mode, with all add-ons and themes disabled, I'm still inclined to think there's something screwy going on here.
I was watching Page Faults/sec, Page File Bytes and Working Set in Performance Monitor and tailing the Privoxy log for requests. Even with Firefox minimized and "doing nothing" (making no requests, anyway), over the space of a 10 minute period the Working Set grew from 244,375,552 bytes to 274,939,004 bytes (averaging 50,939 bytes/second). This behaviour doesn't seem consistent though - sometimes it doesn't seem to grow at all.
Additionally the Page Faults/Sec went nuts, accompanied by a step in Page File Bytes and Working Set, whenever a request got made to http://safebrowsing.clients.google.com/safebrowsing/downloads which seems to happens on a regular basis (approximately every 30 minutes).

Timeline slowing down playback / deleting tracks remedies problem

Here's a nasty bug I've been running into lately.
I've noticed (on the latest version of Premiere CC 2014) that sometimes a timeline/sequence in a project will start to slow down during playback. It slows down not only the advance of the playhead (in terms of how often it's refreshing) but more annoyingly, it slows down video playback in the program monitor. It happens even when footage has been rendered and should exhibit minimal stress on the system.
To illustrate that it's just the timeline, not the video itself, the problem can be "fixed" in three ways:
1. Zoom in on the timeline until playback smooths out again. If a small enough piece of the timeline is visible, it seems to smooth out playback again.
2. Maximize the program monitor window (so that it's the only visible window in Premiere) and then again, immediately playback snaps to full speed again. I can full-screen the video playback, etc, without issue. And un-rendered portions of footage with effects applied play better as well.
3. Reduce the number of video/audio tracks. This is what I think is actually slowing down Premiere. But the problem is, I don't have that many tracks to begin with. On the project I'm working on right now, I have 4 video tracks and 5 audio tracks. Simply deleting the bottom 3 audio tracks (which are sparse and only have a few incidental effects) fixes my video/GUI playback problem immediately.
So my question is... why is Premiere slowing to a crawl just because I added a few audio tracks to a project? Apparently my machine is fast enough to edit 4K material off the GH4 with effects applied and not drop a frame. But add a few tracks of stereo audio? Premiere slows to a crawl.
It wasn't like this in previous versions, guys. Please advise.

Try accessing your audio from a different drive location.

Problem - slow down

Similar Messages

Maybe you are looking for