Problem Solving Phone Cases

Even if you love your phone, it can also cause little annoyances. Lots of these little annoyances can be solved with the right phone case.

Yes Felicity and Kalak.......regarding batteries......When I had iPhones, I still have a Kensington external battery which will almost recharge an iPhone. Apple stores used to sell them.For my Samsung, I have 2 spare genuine batteries and rotate them every 3 or 4 weeks. I always carry 1 spare with me. I also make a habit of fully discharging my battery at least once a week to get optimum performance. Your battery will last longer and perform better if you let it cool down before re-charging. In my previous life with a mobile phone manufacturer, they only once ever released a phone with a non-removable battery, and saw their internal service costs suddenly increase, as the battery is the most likely component to fail in a phone, (apart from drops, which are non-warranty), and a user replaceable battery, even under warranty, avoids the manufacturer's cost of a workshop repair job. RegardsProfessor Phone I am not a Telstra employee. If my advice has been helpful, please mark it as a solution. Thank you

Similar Messages

Hello anybody hear to solve my problem.my phone linked with developer apple id and password its factory unlock but i am unable to active it....so please please help me...

hello anybody hear to solve my problem.my phone linked with developer apple id and password its factory unlock but i am unable to active it....so please please help me...
<Email Edited by Host>

when i coneect phone to my computer for activation i promt for apple id and password for activation.and it is showin apple id like ''ad*****@gmail.com'' but it is not my apple id and i tried with my another apple id but not working i upload screen shoot from itune thanks.......

Problem with phone line after installation of BT I...

Hi,
After persuading my dad (86) to switch from aol to BT infinity he is still without a working phone line. The phone line worked perfectly before switching to BT. Bt infinity was installed 5 weeks ago and ever since then his phone line developes a loud buzzing noice then breaks up completely after about 1-2 minutes into a call. Has been reported to BT several times, 4 BT engineers have been out to try and fix the problem without any success. We do not seem to be getting anywhere with BT and do not know what to do next.
Any help/advice would be gratefully received.

Hi I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 3 working days
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Acrobat printing problems (solved)

Hi Folk
I'm getting on well with Arch apart from one problem, I can not print from Acrobat reader, it accepts the command and does precisely nothing, the jobs are appearing in cups but not being printed, I can print from Open Office and test print from cups but no cooperation with acrobat, anyone have any ideas? thanks
Pete
Last edited by pete051 (2009-09-29 19:14:12)

I don't know what DE are you using. In my case, I use xfce and when acroread starts with his stupidity I just change the print command to 'xfprint'. That forces acroread to redirect the print job to xfce's printing frontend, and problem solved.
Now, if you're using kde, I guess there is something named 'kdeprint', 'kprint' or similar. For gnome, I've no idea.
I hope this helps.
p.s. Sometimes, cups takes his time to print. When its taking too long I purge cups' temp files and restart the daemon.
Last edited by kjon (2009-09-25 00:32:23)

Am I able to find my iTunes serial number? I need it for the problem solving as my problem is solely bad on my iTunes.

For the Apple problem solving section I need a serial number, my issue is that my problem regards missing contents within my iTunes. Do I have an iTunes serial number? And if so, where can I locate it? If there is not a serial number for iTunes, advice on what to do next is much appreciated.

iTunes has no serial number. If you are trying to get to Apple phone support, that is linked to the purchase of Apple hardware, so you need to enter in the serial number of an Apple device. Otherwise, for assistance with problems with iTunes itself you would need to call Apple Support and they would almost certainly charge for the call. I would instead suggest you post the issue you're trying to address here in detail. Someone here can probably offer suggestions.
If your issue is with the iTunes Store, not the iTunes application, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards.

BB10 Calendar problem SOLVED!!!

BB10 Calendar problem SOLVED!!!
Step 1: DO NOT do a device switch using BB Link!
Step 2: On your old device, do a device switch using an "SD Card' - this helped me big time since it copied everything!
Step 3: On your BB10 device, insert the old SD card, and complete the device switch using the "SD Card" option.
Step 4: Voila! All your calendar, phone book and personal data is all transferred on to your new BB10.
All the best!

I had a blackberry 9780 (now a Z10) When I go to setup on the old BB the "device switch" icon is not there.
Is there anyway I can get that as an option on the phone so I can try what you suggest

Dear Apple Good Morning Greetings from me. i use IPHONE 5 in bangladesh. but now i facing a problem that is the signing problem the phone is not open even i cannot enter this phone is says Sign in to ICLOUD but i dont know the password what i do

Apple please help me
Good Morning
Greetings from me.
I used last 3 month IPHONE 5 in bangladesh. but now i facing a problem that is the signing problem
the phone is not open even i cannt enter this phone
is says
Sign in to ICLOUD
Enter the Apple ID password for
but i dont know the password. Please brother help me to use this phone. i brought this phone from some one 355pound. so i am in helpless.i am facing big trouble i dont have enough money for purchase another one. please help me...........................
<E-mail Edited by Host>

You need the previous owner to unlock it, unless they do you have a brick there is no other way .
iPhone was probably stolen if you purchased on eBay, claim and get your money back
See here
http://support.apple.com/kb/HT5818
for explanation of Activation lock
APPLE will not help you

Hello - downloading app problems - this phone can only be usedto download apps in uk or something - think i am linking to the us apps - how do i link to the uk apps?

hello - downloading app problems - this phone can only be usedto download apps in uk or something - think i am linking to the us apps - how do i link to the uk apps?
ta

You're welocme
Depending on the size of the app or the connection speed when using Wi-Fi it could take a little longer to download. You can also try to download it onto your computer, might be faster, and sync it to the phone after that.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?

i dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?

Good job with trying the two-button reset, that would have been my first advice for you. Next, I suggest you take the reset/update a step further. This step may risk losing the data on your phone, but since it's not working already, there may be no other solution.
On your computer, make sure you have internet acces and the latest version of iTunes installed.
Launch iTunes and connect the iPhone
Press and hold both sleep/wake and home buttons
After ten seconds, only release the sleep/wake button.
If you were successful, the iPhone screen should stay dark and the computer should display a popup.
If you see a message saying "iTunes has detected a device in recovery mode," then continue by clicking yes to each subsequent popup.
If the iPhone displays the silver Apple logo start over with step three of these instructions.

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

Bug fix for Mac book wireless - problem solved!

Aparantly there is a rather large number of folks out there who've discovered this dillema with wireless not working very well at this point on the Macbook.
Well, I can attest there is one very good solution out there for this issue. This application called Sonar Theater from www.sunray.tv includes a bug fix for the wireless connection issues with Macbook in their latest 1.5 release of Sonar Theater.
I downloaded it, put it into my start up folder and waalaa! problem solved. I've haven't any more issues with dropped wireless since - it's been running constantly for over 2 weeks now.
I haven't even attempted to touch my router configuration - don't need to.

Welcome to the better life of Macs. I am using Sonar Theater too and it's been working very well for me. In fact, I'm getting hooked on just texting a message to my Mac book to fire up user sessions now. I think if you give the Mac Book some time however, you'll find that there really is no comparison to PC's. Your life overall is going to just keep getting better as you dig in to the resources available to new Mac users.
I'm sure it seems confusing to PC users at first, but here's how to set up any application as part of your startup sequence. It really is extremely easy and simple compared to the PC world. Oh and by the way, in reality, Mac users refer to this as your login sequence. So, at login time, you can do a multitude of different things for each user account you might want to set up. Naturally, you can choose to share or not share applications and data between these user accounts on your Mac too....
Mac OS X 10.3 or later
1. Log in as the user who wishes to have a login item or as an admin user.
2. Choose System Preferences from the Apple menu.
3. Choose Accounts from the View menu.
4. Click the name of the user.
5. Click the Startup Items button
6. Click the "Add {+}" button.
The item you selected will automatically open the next time you log in.
there are several ways to get good info from the apple community on tips and tricks as well. you should just try the apple os x web site...here,
http://www.apple.com/macosx/resources/
happy mac-ing!

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

Problems with use cases in JDeveloper 11.1.1.1.0

Use cases made with JDeveloper 11.1.1.0.2 can not be used and edited in JDeveloper 11.1.1.1.0.
Same problems with Use Case Diagrams.
And it seems to be impossible to create new use cases in JDeveloper 11.1.1.1.0.
What are the differences between 11.1.1.0.2 and 11.1.1.1.0 if you look at use cases??

In JDeveloper 11.1.1.0.2 each use case has one file with the folllowing name: *.xhtml_usc.
In JDeveloper 11.1.1.1.0 each use case has two files with a names like *.xhtml_usc and *.uml_usc (after standard migration with JDeveloper). I can still edit the *.xhtml_usc files, but I have no idea what to do with the *.uml_usc files. I can only open a Property-editor, but the properties I see have no relation with the text I used in my original use cases . New use cases only have a *.uml_usc file and a Property-editor. In javadoc the new use case does not appear.
My question is: why do I have two different use case files in JDeveloper 11.1.1.0 and how can I use the Property editor??

Problem Solving Phone Cases

Similar Messages

Maybe you are looking for