Problem Sony smart wireless pro only recognize 1.23 GB of 32GB Micro SD Samsung!!!

Hello just few minutes ego i put into my new bluetooth headset of Sony a brand new 32GB micro sd Samsung class 10,after that i connect my bluetooth with my laptop and only recognize 1.23 GB!!!!!
Seems that the new product of Sony having a lot of problem.
Yestarday i had whrite other problem.
What Sony is going to do to resolve this kind of issue that having the new bleutooth headset.
Update: I put my micro sd on my phone not having any kind of problem full recognize the 32 gb,
after that i put into the micro sd 9 gb of music and then again put the micro sd in Sony Smart Wireless Pro and nothing again,
this time when i try listening music just appears ''please wait'' and do nothing after that
When i connect my bluetooth into my laptop does not recognize my 32 gb of memory just recognize the micro sd as external hdd but not the size it appears 0 gb!!!
Can anyone else having the same issue?

I did the upgrade to the Sony Smart Wireless Pro but now when you connect the 32 micro sd into the bluetooth and then on my pc normally recognized in the memory 32 gb micro sd, but again without connecting my bluetooth headseat in my pc is not playing at all the songs just says ''please wait'' and nothing after that!!!
Please fix the problem.

Similar Messages

  • Not able to start Sony Smart Headset Pro MN2

    Hi Support,
    I had purchased Sony smart Wireless headset Pro MN2 5 months back and it was working fine (although I know there were limitations and were fixed with multiple updates) until 2 days back when suddenly I noticed a sudden issue.
    My bluetooth device (MN2) suddenly got switched off (and I obviously though it ran out of battery) so I connected it to the charger and I saw an ICON on the display which displayed,
    Computer --> Bluetooth Headset (That means connect bluetooth device (MN2 device) to your computer) and this just doesn't go away.
    Please suggest what needs to be done.
    It is also not detected in Sony PC Companion application.
    Current firmware version is 0.1.D.0.6
    Kind Regards,
    Prateek

    Thanks for posting and welcome to the forum!
    Sorry to hear about the problem you've faced with your device.
    I'd recommend you to re-install the software in the device with our program Sony Update Service, availalbe for download from the link below.
    http://www.sonymobile.com/gb/tools/update-service/
    Try it out and let me know how it works!

  • Who do I contact about faulty headphones from smart wireless pro

    I've had my smart wireless pro for around a month if that and the sound in the left earphone has gone, who do I contact?  And can I get them replaced or repaired

    Please contact your local Sony Xperia Support Team via the details found here:
    http://www.sonymobile.com/global-en/support/contact-us/
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problems with Smart Wireless Headset Pro after upgrading my Xperia Sola to ICS

    Just want to let the community, and Sony, know that since I "upgraded" my Xperia Sola to ICS, the Text to Speech on my Smart Wireless Headset Pro is not functioning. It used to work just fine when I had Gingerbread on my phone, but when I upgraded to ICS, the Text to Speech voice is not output on the headset, but on the phone, on the call speaker... Hope this bug gets fixed soon.
    Maybe someone already knows of a solution?
    Thanks in advance.

    There is a new update available for the Smart Wireless headset pro, MW1 (0.1.C.0.3).
    Which software version are you running your MW1 on?
    If you don't have the latest I suggest that you use SUS to update your software.
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How do I boot from an external hard drive if my MacBook Pro only recognizes the internal drive?

    Hi there, I recently got the white screen of death (w/ circle slash) on my 13" 2009 MacBook Pro. Most people are saying that it is hard drive failure, so I am trying to boot it from an external hard drive to save some of my data before having it repaired. Unfortunately, every time I press "option" while it boots, it only shows the internal drive on the grey screen. I have my external drive connected, but it won't recognize it. What should I do?
    Thanks!

    Welcome to the Apple Support Communities
    You can only start from an external drive if OS X is installed there. If not, it won't appear as a bootable volume because there isn't any operating system inside it.
    As you have a Mid 2009 MacBook Pro, it's better to start from the Mac OS X disc that came with your Mac. Insert it and hold the C key while your Mac is starting. After starting, go to Utilities menu > Disk Utility, select "Macintosh HD" in the sidebar and repair it. If you can't get it repaired, take the computer to an Apple Store.
    If the hard drive can't be repaired, the only option to recover your files is to use an application as DiskWarrior, but it's expensive and it's not sure that it will work, because it may fail

  • MB Pro only recognizes monitor as TV?

    Hello everyone,
    So I've been doing ALOT of research on how to get my new samsung p2370 monitor to look its best hooked up to my MB Pro. I just have one question. I've noticed allot of people online have said to make sure color is set to "millions". When I go to my settings, I dont see that anywhere. I looked at my mac i use at school, and I see that option menu next to the resolution menu (there also using samsung monitor). But when I look at mine, the only option I have is "refresh Rate" which is set at 60 hertz, I dont see a color option like that anywhere. Now I turned off mirroring and am running my mb in clamshell. I went ahead and opened it up, and on my mb went to the display icon up on the top menu bar next to the clock. When I click it, it shows my mb screen as "LCD" screen, and has the resolutions next to it. It also has that "millions" displayed. But the only options i have for my external monitor are the past three res. settings, but they also say (NTSC Television) next to them in parenthesis. Is my macbook only recognizing my monitor as a TV? Is that why it still has a bit of a grainy look? I've reconnected my monitor following numerous directions i found online a few times now. Still same result.
    I greatly appreciate any input!
    Thank you!

    I wanted to add that I am hooked up via DVI. I read that whats happening could be caused by VGA connection, but it is DVI.
    Please help!!

  • Are any more smart wireless pro updates planned

    Hi Sony mods
    Can you advise if any more updates are on the cards for the pro (mw1) there are still some bugs with the device resetting and radio scan failing and if you search the forum a number of wish lists that if half of the requests were dealt with would make a useful device a great device. I know newer hardware has been released but some work on fixing the issues would be gratefully received.
    Regards
    Matt

    Come on throw us a bone

  • Smart Wireless Headset pro won't start

    Hi,
    I have a Smart Wireless Headset pro, yestarday it powered it self off while I was listening to music, since then I can't power it on.
    I've tryed to charge it, to hold down the power for few seconds.
    Nothing works, it dead now.
    Any one have an idia how to fix it?

    Try these steps.
    1 Make sure the headset is turned off.
    2 Press and hold the power key for 15 seconds.
    3. If nothing happens, put the charger in headset and do it again.
    4. Hold the key until Factory reset? appears on the headset display.
    3 Press the Next key or the Previous key to
    select , then press the Select key.
    If the problem still remains it sounds like it needs to be examined and fixed at an repair center. Contact your local support team for more info.
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I have 8 gb on my macbook pro, but it sometimes only recognizes 4 gb. Whats going on?

    I have 8 gb on my macbook pro, but it sometimes only recognizes one of the banks and thus only 4 gb. I was about to open my Macbook Pro mid 2010 2.66 up but it went back up to 8 gb of ram.
    I also noticed that the macbook would go to sleep and not wake up again, sometimes. Not sure if this is related.
    I did the usual, resetting the PRAM and the other thing with "shift control option." It didn't work and kept on saying 4 gb.
    I woke up this morning ready to break open the mac when it read 8 gb. Great! But the **** is going on. Is that memory slot loose?
    My google search and search through these forums were useless, no solutions. One guy tried changing his memory into the two banks, no difference. Sometimes it recognizes bank 1 sometimes it doesn't. Another put his ram in another computer, it's not the ram. Someone suggested the motherboard, then someone said "no way" for some arcane reason.
    The only solution that seamed viable was going back to snow leopard, the last great OS. Im on mountain lion, not to shabby, but no leopard.
    Problem is that I am out of warranty.
    Any suggestion would be helpful.

    why don't you try this:
    open the back of your Macbook - if you're technically capable...
    take the ram out, clean it up with a pencil eraser - blow it out - put them back in, slowly and in a slight angle until they lock into place - make sure they are seated correctly...
    restart your macbook - if the same bank is still not detecting - then the issue is your RAM slot...
    good luck

  • Setting up a Wireless-N only network (WRT160N) problem.

    Hi.
    Now that I bought the wireless N adapter for xbox 360, all my wifi enabled devices are "N" capable. So, I've been trying to set my network to "n only" but everytime I do that, I can't connect any of my devices to my network. 
    Can someone please help me to properly configure my router/devices?
    Here is a list of my network devices:
    WRT160N router
    MacBook Pro
    Toshiba Satellite A505 Laptop
    Xbox 360
    iPhone (I do use wifi most of the time while at home)
    iPad (same as iPhone)
    So, as I said before, all my devices are N capable, but once I switch the router to wireless-N only, all my devices get disconnected. They all can see my SSID, but can't connect to it.
    Any advice/suggestion/tutorial would be greatly appreciated.

    Well... seems like the WPA security was the problem. I switched to WPA2 and is running like a charm. The only thing I have issues with is Media Center (usingo xbox as an extender). Everytime I run the network test, graphic or bar test shows a very unstable conection. The weird thing is that, if I run an HD video without media center (thru windows media playet sharing), the video file runs flawlessly.... so... should I blame the lame media center for this?

  • My pc only recognizes my Sony Tv as Generic monitor...

    So, I got this desktop from a relative and everything worked at the time, sound and all. But it was still filled with stuff I didn't want to uninstall, So I decided to reset it using the System Rcovery tool ( through: At Boot>F11>System Recovery ...)
    During the process, a window popped up saying I should unplug everything from the pc. The only things connected throughout the whole process werer my wireless mouse, wired keyboard, and my Sony Tv.
    I'm scared that the computer did something to my tv because at the time, the pc WAS reading the monitor as "Sony Tv", as it should have. But now, after the Recovery, it will only recognize the tv as
    "Generic Non-PnP Monitor on Standard VGA Graphics Adapter."
    and now it won't recognize the speakers built in the monitor. I Also have new Resolution options that actually fit the bounderies ofthe screen without killing the quality, but it means nothing to me without the sound. I unplugged the HDMI Cable and put it into my xbox 360 and it still functions normally, Sound and all.
    Please help me, Forums. You're my only hope.
    This question was solved.
    View Solution.

    Hello @Lyko,
    I understand that your computer is showing your Sony TV as a PnP device and it has no sound. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    In the meantime you can try using the HP Support document: Connecting a TV or Monitor to your Windows 7 PC using HDMI, which will ensure that you have it set up correctly.
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Smart Wireless Headset Pro connection to laptop

    Good afternoon all,
    I'm trying to connect my wireless headset to my business laptop...
    But when connecting, windows (vista) wants to have drivers for the headset.
    Now my question is: Where to get these drivers? Or is this even possible what I want?
    Thanks!

    There are no special drivers for Smart Wireless Headset pro, it uses standard Bluetooth drivers. Check that your Bluetooth stack is using the latest firmware version.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Sony Xperia Z3 + Smart Headset Pro | Messaging Crash

    Hi. I just got the Smart Headset Pro MW-1 to be able to receive calls while cycling. I've installed apps to allow my phone running Lollipop to push messages and notifications to the MW-1. As recommended in a forum I read, I shut down and powered both devices up after pairing and after the automatic update from the phone to the headset. Below are observations made I hope someone can help with :
    1. I wanted to use TTS to let the device notify me if I received an email or a text message. It's working, but the voice volume is so low is it's useless on the road. I was using the stock Google TTS engin, by the way. Also, I tried incincreasing the voice volume manually (a volume bar appears really quickly on the phone when a text arrives and the phone notifies me) by triggering the volume bar to appear and sliding to all the way to the highest setting, but it only affects the notification being read, meaning the volume change reverts back to the original setting. I noticed that the TTS volume is set to about 10% of the volume scale, and at the very end of a voice notification, the volume goes up really fast, making the last second of the voice as loud as the media volume. I think something is overriding the TTS volume. I disabled the TTS feature add iit's useless to me in its current state.
    2. When I read a text message on the MW-1, the messaging app crashes. I'm using the stock messaging app of the phone as well.
    Is this a firmware issue On the headset or a lollipop issue on the phone?

    It'll be good to contact Sony directly
    http://support.sonymobile.com/global-en/contactUs/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

  • Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    TarahCurrie Sep 10, 2014 3:48 PM
    Restore From Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    MacBook Pro, Mac OS X (10.5.8)
    You are running 10.5.8
    Did you try booting off your Install disk holding the c key down.  From here you can get to the drop down menu just a few clicks in (you are not going to install) and run  the Disk Utility>Repair Disk.  See if it will let you do this.

Maybe you are looking for