Problem starting firefox: it complains that there is no disk in diskdrive
Every time I start firefox, it complains that there is no disk in disk drive H: - when I put any disk thre it starts normally.
Each time you use "Save As", the pref ''browser.download.lastDir'' is updated with the drive:/path of that save. See: <br />
http://kb.mozillazine.org/Access_most_confugurable_options_in_Firefox#Browser<br />
('''scroll down on that page to ''browser.download.lastDir'')'''
<br />
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
*Shockwave Flash 10.0 r45
*Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
Similar Messages
-
I recently updated from Firefox 7 to Firefox 8.
Until version 7 the test framework I use, based on Selenium, was working normally with the browser. Since I updated to version 8 - the framework can't open any browser session. So I had to downgrade to older version to be able to run my tests. But the only older version than 8 was 3.6 - really stable but very, very old one.
So I need to choose to work with any version between 3.6 and 8, excluding 8 for now.
How can this happen from the Firefox site?Nice try, but this url does not work anymore 10 Dec 2011. Are we ever going to have an answer as to why all versions before V8 were dropped off the map back to 3.6? Is 3.6 secure?
-
# Question
there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
..Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
When reainstalling OS X in recovery it shows that there is no disk to choose
when reainstalling OS X in recovery it shows that there is no disk to choose and i can not reinstall
It would be helpful if you indicated the EXACT model/year MBP that you have and the OSX.
Ciao. -
When I am using Premiere Elements 13 I get a message that pops up "There is no disk in the drive" I click on it and it keeps coming back "very annoying", but about three months ago it happened to me and I was told to change the file name from OldFilm.AEX to OldFilm.AEXold. Well now the file is back in Folder OldFilm.AEX. Here is a screen shot the files are highlighted.What should I do now to correct this once and for all, or can I? Thank you for your time.
TomWolves
I would do another rename to disable or just delete all the OldFilm.AEX and OldFilm.AEXOLD in that NewBlue Folder.
If you do, please let me know if that OldFilm.AEX regenerates itself the next time you open Premiere Elements 13.
Here is the strange story...at least from my Premiere Elements 13 Windows perspective...never had the No Disc error issue
Here are some details to sort through trying to figure out why you have 2 OldFilm.AEX file in the NewBlue Folder.
1. The original OldFilm.AEX file of Premiere Elements 13 has the date of 9/4/2014 (just before the version was released on 9/24/2014).
After the 13.1 update is done (whenever date), that OldFilm.AEX file has the date of 1/31/2015. I first saw notification of the 13.1 Update
release early in February 2015.
2. Now in Premiere Elements 13.1, if I take my OldFilm.AEX (date 1/31/2015) and disable it by renaming it to OldFilm.AEXOLD, close out of there, and reopen
the program, the OldFilm.AEX is not seen to regenerate. The OldFilm.AEXOLD remains there as its lone self.
3. So, I am thinking that your OldFilm.AEXOLD in the screenshoot is "original equipment" that you disabled to get rid of No disc error.
Why the OldFilm.AEX is there also is not clear, but the dating on it suggests that it came along with the 13.1 Update.
Bottom line: let us try the deletion or disabling one more time and see what happens.
Looking forward to further reports on your findings, as your time permits.
Thanks.
ATR -
I've seen a coupld of suggested solutions that invovle deleting files, and reconfiguring settings, but these all seem to be aimed at PC users; I'm on a Mac, and the instructions given don't work.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Exactly as it says above. The computer was given to me as a gift, and the person who gave it to me had already bought photoshop and put it on for me. Photoshop was working perfectly before AVG did the computer scan, and now every time i try to use it a window comes up instead that says "A problem has occurred with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen. Error: 213:11"
Apparently it "cleaned" away needed files.
Most likely you will have to reinstall Photoshop to get all the files back. -
When a developer called my online help system (generated in RoboHelp9 as WebHelp) from Firefox, the help seemed to work fine. But he said in Firefox "trace output it complained about 'can not find contentlist.xml’" What is it looking for, and will this cause problems with the functioning of the help?
There is no topic in my RH9 output by that name.Can you replicate the error message yourself? For example, does it appear in Firefox's Error Console (Ctrl+Shift+j)?
If you aren't getting user complaints about missing functionality, this might be a nonessential file, or it could be a spurious error related to the user's personal configuration (e.g., an add-on).
There is a more global issue to watch for: During the past year Firefox started enforcing higher security restrictions for local web pages. Your page should be able to access files in the same folder or a subfolder. However, if the RoboHelp page is set up to access resources in a directory that requires navigation through a parent directory, that might be blocked.
Hope this helps. -
When the new password is used, it asks also for a user name if an email account is recorded.
Finally, after trying lots of user names, this one seemed to work. The website logon should not require a user name if I can get a password change by just using my email account.Hi brendalynn6,
Have you looked at the [[Opening PDF files within Firefox]] Knowledge Base article? There are a couple of different PDF plugins listed in the article. I'd suggest you give those a shot. You might also want to take a look at [[Using the Adobe Reader plugin with Firefox]].
Hopefully this helps! -
my previous version of firefox had a drop
down arrow that enabled me to go back to a location of my choice, often further back than what the 'back' button gives. can anything be done about this?It's only the little caret next to the back button that's gone. If you click and hold on the back button, it will still drop down.
-
after I exit Firefox all downloading in background files are ended without any information about it. Is there a chance to change it ?
Try changing the hidden preference '''''browser.download.manager.quitBehavior''''' to a value of 2 in about:config to get a warning window when closing Firefox during downloads. I have included a link below on using about:config
*http://kb.mozillazine.org/Browser.download.manager.quitBehavior
*http://kb.mozillazine.org/About:config -
I cannot start firefox because of a security problem after it crashed. What should I do to fix it?
I use Vista on my dell inspiron 1721. Firefox closed itself, computer shut itself down, a lot of 'corrupted files' were deleted without my interference, and when Vista finally came back up, Firefox wouldn't start. Nowit says I have to fix the firefox directory. How do I do that? The help page on the profile didn't help me. Thanks, mhixon This started when I was browsing on Drudge report. The popup message said:
Could not initialize the application's security component. ....
I could not start firefox again after that.
How do I update a graphics driver?You may need to delete the file secmode.db as well.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
hi there the problem with my iphone is that there are at least two or more contact numbers that i cannot send sms although the rest are working perfectly well can anyone please help?
Tap Messages and make sure Send as SMS is turned on.
If that doesn't do it, maybe Apple's doc will help -> iOS: Troubleshooting Messages -
I have tried setting my homepage to Google and to Bing but Firefox closes as soon as the page loads. Starting it a second time works with no problems.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
Reset creates a new profile and tries to import some settings from the old profile leaving the old profile intact.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
Also check the settings in your security software.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Synchronize Folder problem - LR finds missing photos that aren't missing
A bit of background:
I decided to dive in and clean up a big 40K catalog I have. This involved:
Moving images around
Creating new folders
Renaming existing folders
Renaming all photos
All of this was done within LR to avoid problems. But now, everything is working fine, LR does not complain that there are missing photos EXCEPT when I try to synchronize a folder.
The strange this is there is no question mark on the images and when I use the Find Missing Photos, LR tells me that there are no missing photos.
But when I try to synchronize a folder (any), it finds all the images as new images and suggests to remove the missing photos (both matching the exact number of images). Obviously I don't want to do that and loose my edits...
I found some information here, it seems to be an old bug but no solutions work for me... I really don't want to go back and redo all this work. Is there a magic trick?
Thanks!Thanks but this a completely different problem. You are referring to the "Treat JPEG files next to RAW files as separated photos" setting that I have unchecked purposely and I do not shoot RAW + Jpeg anyways.
Your issue is a normal behavior. LR assumes that Jpeg+RAW shooters will only required the RAW to be imported in LR unless you change that setting.
My problem was a very specific instance where the volume name did not match case with the folder names in LR. As soon as I fixed that, it went back to normal.
Maybe you are looking for
-
Can't open the program after Installing . Shows message " You can't open your current current photo library using this version of photo. Made several attemps in fresh instalaltion without any success.
-
Flash Files Will Not Display in Dreamweaver
Flash files will not display in Dreamweaver or in any browser. If I insert a Flash button, text or other file, when I hit the "play" button the flash place holder disapears, and the Flash file never displays. In the Property Inspector, the file is al
-
How to send automatic mail and put attache file on batch file ?
how to send automatic mail and put attache file on batch file ? START MAILTO:[email protected]?SUBJECT=PHONE%CALL^&BODY=Testing
-
Bridge does not accept Keywords for video files
Lately, when I try to add a Keyword to a video file (.mov Quicktime) in Bridge, I get the following error message, "The file (name) cannot store XMP metadata. No changes will occur." How do I fix this? Thank you!
-
Xorg7: fglrx drivers fails with modprobe
Arch installed three days ago from ISO Noodle (after a crash of an old HD), have been actualised up today with xorg7. ATI Radeon 7200LE card is correctly recognised by lshwd as Radeon QD using driver 'vesa', but a display in X flitters in comparison