Problem starting Oracle Intelligent Agent

Hi,
I have an Oracle Database 8i installed on Windows 2000 Server.
When I change my computer name, the Oracle Intelligent Agent could not be started.
What should I do to start the Oracle Intelligent Agent, if I want to use new computer name for my computer ?
Thanks in advanced.
Regards,
Eddy

Nick Yelevich (guest) wrote:
: Hkon W0ien (guest) wrote:
: : When starting oracle intelligent agent with the lsnrctl
: : dbsnmp_start command everything seems to be OK, but the
agent
: : dies immediately. The listener and everything else is
working
: : OK. The files snmp_ro.ora and snmp_rw.ora are created and as
: : fare as I know with the correct contents. I have turned on
: trace
: : and the last lines in the trace file dbsnmpw.trc shows the
: : following.
: : snmidlpi_PkgIndex: creating package index
: : -<ERROR>- snmidlpi_PkgIndex: failed to initialize init.tcl,
: : error 1
: : -<ERROR>- snmidlpi_PkgIndex: Tcl result:
: : I'm running RedHat 5.2 and Oracle v.8.0.5 production. All
files
: : in TNS_ADMIN are created using Oracle Net8 Assistant.
: : Any idea ?
: My situation is almost the same, but in my case snmp* files
had
: not been created. I have RedHat 5.2 and preproduction version
: Oracle 8.0.5.
I too can not start the intelligent agent. I am on Redhat 5.2
with the (I think production ) version of 8.0.5. Mine seems to
start up but the lsnrctl dbsnmp_status says that it is not
running. the dbsnmp_start seems to work but gives no feedback.
I get the error NMS-00315 in on of my log files. Any one have
any idea? I tried reinstalling the agent and infact the entire
oracle 8 server and got the same thing. thanks in advance.
Keir
null

Similar Messages

  • Not able to start Oracle Intelligent Agent

    Hi to all,
    I am not able to start the Oracle Intelligent Agent. I am getting the following error.
    bash-2.05$ agentctl start
    DBSNMP for Solaris: Version 9.2.0.3.0 - Production on 13-OCT-2008 10:43:56
    Copyright (c) 2003 Oracle Corporation. All rights reserved.
    Starting Oracle Intelligent Agent...
    Agent startup failed. Check /oracle/product/9.2.0.1/network/log/dbsnmp.nohup for details
    ---Output of dbsnmp.nohup---
    bash-2.05$ more dbsnmp.nohup-----
    Mon Oct 13 10:43:56 AFT 2008
    Failed while initializing SNMP
    Error initializing subsystems
    Agent exited at Mon Oct 13 10:44:00 AFT 2008 with return value 55
    Could not start agent. Initialization failure
    ---Output of dbsnmp.log---
    bash-2.05$ more dbsnmp.log
    DBSNMP for Solaris: Version 9.2.0.3.0 - Production on 13-OCT-2008 10:44:00
    Copyright (c) 2003 Oracle Corporation. All rights reserved.
    System parameter file is /oracle/product/9.2.0.1/network/admin/snmp_ro.ora
    Log messages written to /oracle/product/9.2.0.1/network/log/dbsnmp.log
    Trace information written to /oracle/product/9.2.0.1/network/trace/dbsnmp_6030.trc
    Trace level is currently 0
    ---Output of nmiconf.log---
    bash-2.05$ more nmiconf.log
    DBSNMP for SunOS 5.9: release 9.2.0.0.0 - Production on 13-OCT-08 10:43:56
    Discovering services on kapttdw1 configured on host addresses {kapttdw1 kapttdw1.com loghost 192.168.100.114 applicationdb 192.168.1
    00.120 kapttdw1m 10.10.100.186 kapttdw1-ce3 192.168.100.233}
    Using oratab file /var/opt/oracle/oratab
    Could not open emtab at /var/opt/oracle/emtab.
    Can anybody tell me how to resolve this issue.
    Thanks in Advance
    Hashim

    Check following thread..
    http://kr.forums.oracle.com/forums/message.jspa?messageID=631474
    and search on metalink as well. There are a lot of threads addressing this issue in various scenarios.

  • Problem with Oracle Intelligent Agent 8.1.7 Users Guide PDF

    I can't view of print certain pages (51,64,68) from the PDF version of the Oracle Intelligent Agent Release 8.1.7 User's Guide (http://downloadeast.oracle.com/docs/cd/A87860_01/doc/em.817/a85251.pdf). Have tried from several PCs and still get the error.

    Hi Terry,
    Please try the following URL:
    http://download.oracle.com/docs/pdf/A85251_01.pdf. I believe this file should be fine.
    Thankyou for highlighting the issue. We shall address it as soon as possible so that the file at the link you provided will be fixed.
    Thanks and regards,
    Les

  • Problems installing TCL 7.5 and Oracle Intelligent Agent

    All
    Has anyone had any success in installing TCL 7.5 and Oracle
    Intelligent Agent? If so could you please provide a step by step
    summary of the installation process. I keep getting error
    messages when I run gmake for TCL. I commented out the lines
    specified in the instructions. Does one have to use TCL 7.5? I
    even tried to run version 8.2 and it restarted my machine while
    running gmake test. Maybe it is how I commented the lines. I
    used the # character to comment out the lines. Please help. IFve
    got everything else running I can even use Net8 and SQL plus
    from my Windows NT Client. I now need to be able to use Oracle
    Enterprise Manager, which requires TCL 7.5 and Oracle
    Intelligent Agent.
    Many thanks
    null

    Thor Erik Jelstad (guest) wrote:
    : I am using Oracle 8.0.5.0 and Red Hat 5.2/i386
    : When I try to start Oracle Intelligent Agent I receive the
    : following error message:
    : "DBSNMP: error in loading shared libraries /usr/lib/libtcl.so:
    : undefined symbol: stat"
    : I have installed TCL package 8.0.3-20.
    : Thor Erik Jelstad
    I ran into "stat" symbol issues during some builds. I don't
    recall if the subject program had to be built, but if so, adding
    "-shared" to the cc (for linking) command helps. I think the make
    variable is LDCCOM.
    -Later.
    null

  • Oracle intelligent agent

    hi ;
    os : suse sles9 sp3 Oracle 9.2.0.4
    when i am trying to start oracle intelligent agent ı get this error message ;
    DBSNMP for Linux: Version 9.2.0.4.0 - Production on 18-APR-2004 02:32:56
    Copyright (c) 2003 Oracle Corporation. All rights reserved.
    Starting Oracle Intelligent Agent.../opt/oracle/9.2.0.4/bin/dbsnmpwd:
    line 156: 2927 Segmentation fault nohup $ORACLE_HOME/bin/dbsnmp $*
    $DBSNMP_WDLOGFILE 2>&1
    /opt/oracle/9.2.0.4/bin/dbsnmpwd: line 156: 2940 Segmentation
    fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
    /opt/oracle/9.2.0.4/bin/dbsnmpwd: line 156: 2952 Segmentation
    fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
    /opt/oracle/9.2.0.4/bin/dbsnmpwd: line 156: 2964 Segmentation
    fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
    how can ı solve this problem ?
    Edited by: Gundem on Sep 17, 2008 3:30 AM

    check this metalink notes:
    Note:295385.1 - The 9.2.0.4 Intelligent Agent Does Not Start on Linux
    Note:295920.1 - Agent Fails with Segmentation Fault on 9204; Patch 3238244 Will Not Apply

  • Oracle Intelligent Agent cannot be started

    I have installed Oracle 9i into RedHat Linux 9. When I start the Oracle Intelligent Agent, I get nothing response, and find the agent cannot be started.
    I find the error message in dbsnmp.nohup which is showed below:
    /opt/ora9/product/9.2/bin/dbsnmp: error while loading shared libraries: libvppdc.so: cannot open shared object file: No such file or directory
    Agent exited at Thu Nov 13 23:20:31 HKT 2003 with return value 127
    Agent thrashing. Exiting dbsnmpwd at Thu Nov 13 23:20:31 HKT 2003
    I found the library object is existed.
    [oracle@localhost lib]$ ll libvpp*
    -rw-r--r-- 1 oracle oinstall 552036 Apr 26 2002 libvppdc.so
    Can anyone help me to solve the problem?
    Thank you.
    Regards,
    Franklin

    Problem of method 1 (for re-install the oem agent / dbsnmp)
    When I follow the "work Around Procedure" from
    http://www.puschitz.com/InstallingOracle9i.shtml#OracleInstallationErrors
    and download the RPMs (glibc-2.3.2-5.i686.rpm glibc-common-2.3.2-5.i386.rpm glibc-devel-2.3.2-5.i386.rpm) for the procedures.
    When I run the command (#rpm -Uvh --oldpackage glibc-2.3.2-5.i686.rpm glibc-common-2.3.2-5.i386.rpm glibc-devel-2.3.2-5.i386.rpm),I found the error shown below:
    error:glibc-2.3.2-5.i686.rpm:V3 DSA Signature:BAD, key ID db42a60e
    error:glibc-2.3.2-5.i686.rpm cannot be installed
    Problem of method 2
    When I try to unpack glibc-2.3.2-5.i686.rpm and replace libc-2.3.2.so and libc.so.6 by using the following steps
    # mkdir /root/tmp
    # mv glibc-2.3.2-5.i686.rpm /root/tmp
    # cd /root/tmp
    # rpm2cpio glibc-2.3.2-5.i686.rpm | cpio -idmv
    # cp /lib/libc-2.3.2.so /lib/libc-2.3.2.so.ORIG
    # cp lib/libc-2.3.2.so /lib/.
    # rm -f /lib/libc.so.6
    # ln -s /lib/libc-2.3.2.so /lib/libc.so.6
    I find the system is halted, when I run (# cp lib/libc-2.3.2.so /lib/.) When I reboot the system, I find error
    init:error while loading shared libraries:libc.so.6:cannot open shared object file:No such file or directory
    Kernel panic: Attempted to kill init.
    Please help me to fix the problem. Many thanks.
    Regards,
    Franklin.

  • Oracle intelligent agent executable has encountered a problem and needs to

    Hi All,
    I am getting the following message after commence of OS (windows XP) on my LAPTOP.
    "Oracle Intelligent Agent Executable has Encountered a Problem and needs to close."
    due to the above problem it takes time to be fit to start working. that is; when i start my laptop then it gets ready very shortly but just later on it is seen that my laptop gets to be hanged. it seems that some background process runs and during this time nothing can be done on my laptop (even REFRESH - F5 doesn't respond). then after some time the above message comes. this process seems to be very much annoying.
    there is a small Oracle database (9i) in my laptop along with Oracle developer (10g).
    Thanks in advance.

    Hi Tapash,
    You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
    and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
    [OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
    Regards
    Peter

  • Oracle Intelligent Agent Exe encountered a problem and needed to close

    Whenever the server is rebooted I get the error "Oracle Intelligent Agent Executable encountered a problem and needed to close". The agent won't start, and I found a work around that included deleting files from the network/agent and admin folders, then restarting the agent. This works, however the next time the server reboots I have to go through all of this again. Any ideas why this keeps occurring?
    Also, what does this agent do? I've read through some documentation and can't quite tell if I actually need it started. Do you use this agent to only remotely monitor/administer through OEM? I'm really confused and could use some insight. All my process appear to be working fine.

    Because of the error message I guess you are on Windows and database version is lower than 10g (by the way it's always a good idea to tell the environment, because Oracle runs on different platforms in different versions).
    ... 'encountered a problem and needed to close' is generic Windows error message with millions of possible reasons. So it's not possible to find remotely a solution. You are right, Intelligent Agent is a counterpart of OEM, but outside production environments rarely needed. I recommend you change the service properties from 'automatic' to 'manual' in control panel. So it does not start at reboot time.
    Werner

  • Oracle Intelligent Agent Service Start Error...

    Hiii...
    My operating system is Windows Server 2003 and I have Oracle 9.2.0.1.0 database server installed on it ...I have also DataGuard Configuration between my primary and standby sides...
    Everything has been OK till this morning I restarded my primary database server from some reason and when my operating system has begun, I received an error message like
    "Oracle Intelligent Agent Executable has encountered a problem and needs to close. We are sorry for the inconvenience."
    then I looked up the eventvwr and I saw the log was "Agent Process exited abnormally during initialization"
    When I ran agentctl start command I received
    "Service could not be started.Check agntsrvc.log for details"
    My agntsrvc.log file has
    -------------- [OracleOraHome92Agent] ------------
    Sending initial service status..
    Commandline is "C:\oracle\ora92\bin\dbsnmpwd.bat" -agent_name OracleOraHome92Agent
    2. WAIT_OBJECT_0: Agent exited with retCode 0.
    Agent failed to startup.
    Check C:\oracle\ora92\network\log\OracleOraHome92Agent.nohup for details
    My OracleOraHome92Agent.nohup has only
    there is nothing meaningfull :(
    Although I tried every agent recover and cleaning steps(deleting *.q files bla bla ....
    restarting service)There is nothing to change
    Please someone help me about it...
    Thanks...

    Hi,
    You are in the wrong forum, this forum is for Oracle Application Express.
    If you look here -
    http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84
    You should be able to find a more appropriate forum.

  • Starting the Oracle Intelligent Agent on Linux/390

    I have recently installed Oracle Developer's Edition on SuSE Linux/390. When I try to start the Intelligent Agent, I get the following error.
    ------------------------ Mon Jun 3 11:59:43 EDT 2002 ------------------------
    Certain conflicts were resolved during discovery
    Please consult /oracle/product/9.0.1/network/log/nmiconf.log for details
    Error: Failed to get directory/file info from environment
    Failed while initializing Collection Service
    Error initializing subsystems
    Agent exited at Mon Jun 3 11:59:45 EDT 2002 with return value 55
    Could not start agent. Initialization failure
    Contents if nmiconf.log:
    DBSNMP for Linux 2.4.7-SuSE-SMP: release 9.0.1 - Developer's Release on 03-JUN-02 11:59:43
    Discovering services on linux1 configured on host addresses {linux1.dowjones.com 172.26.151.11}
    Using oratab file /var/opt/oracle/oratab
    Warning : problem getting ops version for /oracle/product/9.0.1 : CIDW
    Any assistance would be greatly appreciated.

    I don't think the Intelligent Agent is included with the developers release -
    check the directory where it's supposed to be, I think you'll find it's not there.
    You only need IA to start/stop the database from oem and schedule jobs.
    I use OEM to control my instance and run performance packs etc, IA isn't needed for this.

  • Oracle intelligent agent failure

    Hi,
    I am on windows 2000 server running Oracle 9i database and I cannot start the intelligent agent for database 9i it keeps giving the ,message that it is idle therefore was stopped. When I start it in dos it dumps the message belog in its log. I would like to use the OEM to manage my database but can't because the OMS cannot detect my nodes cos the agent is not running. Please assist.
    The message
    Service name is Oracleoracle9_HomeAgent
    Failed while initializing Collection Service
    Error initializing subsystems
    Agent exited on with return value 55
    Could not start agent. Initialization failure
    Agent startup failed. Check F:\ora9i\network\log\Oracleoracle9_HomeAgent.nohup for details

    Hi,
    check for the time zone.
    In my case it was solved when I was creating a system environment variable named TZ and choosed a valid content, see metalink for timezone problems:
    nsupportedtzs.lst
    supportedtzs.lst
    in the sysman\admin should have a common denominator.
    Regards
    Matthias

  • Oracle Intelligent Agent Won't Run

    Hello World,
    I have just installed Oracle 9i DB on Windows XP. When I installed Oracle
    Dev. Suite 9i on the same machine my Oracle Intelligent Agent stopped working. I checked the services tool and noticed that the installation of DEV. SUITE 9i had installed an agent for Developer's Suite Oracle home. Both agents are not working. They both terminate in the same manner AGNTSRVC.exe Failed and the GUI request to send the error to MicroSoft. What can I do to get this Oracle Agent working.
    Many thanks
    Emmanuel

    I am also having this problem, but generally just when it is starting on boot up. I can go into services and start it manually, so it runs (although it has a tendency to crash). I get the following in the nohup file:
    Service name is OracleOraHome9iAgent
    Failed while initializing Comm service
    Error initializing subsystems
    Agent exited on 08/29/2002 06:00 with return value 55
    Could not start agent. Initialization failure
    Agent startup failed. Check E:\oracle\network\log\OracleOraHome9iAgent.nohup for details
    Not a big problem, yet. Experience tells me, though, that when one little thing starts having problems, more and more things start having problems.
    Tomm

  • Oracle Intelligent Agent Startup Error

    Whenever I try to startup the Oracle Intelligent Agent on my DB server I get
    the error:
    could not open emtab at /var/opt/oracle/emtab.
    I am using Oracle9iR2 and have installed the complete package. I did a
    search of the HD and this file does not exists anywhere..which explains why
    it was not found! does anyone know what I must do to resolve this problem?
    can I just ignore this error???
    Note: I only want to run the agent, the EM database is not installed on this machine but a seperate machine in another location.
    Thanks in advance,
    Steve,

    No, just the 9i R2 database + EM, we don't use AS. Maybe I can just ignore this error?? Sometimes I notice oracle gives errors which are in fact just warnings or information. not very helpful as you never know. Not sure if I can ignore this or not.
    Thanks,

  • SNMP oracle intelligent agent configuration

    Hi,
    i have a Linux installation with Orcale 8 DB and an intelligent
    agent installed.
    I would like to monitor the database via OEM and
    try to plan jobs etc.
    I have problems to discover for services inside OEM (NT-Side)
    I got the error Failed to find node address"
    Who can shortly explain what must be configured.
    Or has somebody configuration Files which will work ?
    Windows NT 4.0 / OEM 1.6 installed (Enterprise Console)
    Linux Orcale 8.0.5 and Intelligent Agent
    Thanks
    Stefan
    null

    Stefan Panek (guest) wrote:
    : Hi,
    : i have a Linux installation with Orcale 8 DB and an intelligent
    : agent installed.
    : I would like to monitor the database via OEM and
    : try to plan jobs etc.
    : I have problems to discover for services inside OEM (NT-Side)
    : I got the error Failed to find node address"
    : Who can shortly explain what must be configured.
    : Or has somebody configuration Files which will work ?
    : Windows NT 4.0 / OEM 1.6 installed (Enterprise Console)
    : Linux Orcale 8.0.5 and Intelligent Agent
    : Thanks
    : Stefan
    You mast start the intelligent Agent on the LINUX Box
    lsnrctl dbsnmp_start
    During the FIRST Startup the Agent generates its config files
    (snmp_ro.ora,snmp_rw.ora) itselve....
    You should complete your network configuration (LISTENER.ORA,
    TNSNAMES.ORA and ORATAB (all in lower case within unix)) befor
    starting the Agent the first time...
    null

  • Oracle Intelligent Agent Executable

    Hi there, Has anyone experienced this before.
    When I tried to boot up my P4 1.8GHz laptop, it takes ages and eventually comes up with a dialogue box with Oracle Intelligent Agent Executable.
    I have increased my virtual memory but still no improvement.
    When I click on sent report, it takes me to Microsoft where I am directed on to contact Oracle.
    I remembered when I instalIed Oracle Enterprise 9i, everything seemed fine until I downloaded Developer Suite 10g, and installed it in a different directory, then it started.
    Any ideas
    Many thanks in advance
    Cube60

    Hi Tapash,
    You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
    and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
    [OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
    Regards
    Peter

Maybe you are looking for