Problem starting the xserver (screen not found)
I am not sure what I did wrong. I am running this inside of VMware, and I installed the nvidia 96xx drivers (I have the 9300gs graphics card). Or, is this wrong because VMware doesn't use hardware graphics cards, it uses a build it graphics unit? I am not sure if this is a VMware problem or my problem with drivers. I will post the results from the error log, xinitrc and my xorg config. Any help would be great~ thanks
xorg
paste.pocoo.org/show/220384
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jan 28 16:14:36 PST 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "dri2"
Load "dbe"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "VMware"
BoardName "SVGA II Adapter"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
xserver failure log
paste.pocoo.org/show/220387
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux Archy 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/disk/by-label/root ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 1 02:16:19 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 VMware SVGA II Adapter rev 0, Mem @ 0xd0000000/134217728, 0xd8000000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:0f:0
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
xinitrc
paste.pocoo.org/show/220388
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec xterm
Last edited by Google (2010-05-31 21:42:51)
Thanks, somehow I missed that. I was using the 'newbies' guide for normal installations and it didn't hint at users that were installing on VMware should see the VMware guide. Or did it? If it didn't maybe someone can add the line in, so VMware users don't use the normal installation guide for the xserver
I have started to try the VMware x server sections. Should I uninstall xorg and the nvidia drivers and start from the top just to be safe?
Last edited by Google (2010-06-01 03:17:35)
Similar Messages
-
An error occurred while starting "OCMRepeater". The component was not found
I just built up an OVM 2.2 machine and then installed the manager 2.2 template followed by the 10.2.0.5 OMS Grid control template. I've got all the systems up and functional via those templates at this point but the Grid Control server starts up with 2 targets down. When I dig into it it really looks to only be the OCMRepeater under the Application Server and so both the Application Server and the OCMRepeater show as down targets. When I try to start the OCMRepeater from the I am asked for the OS username and password. I supply it with username oracle and the oracle password, which I have verified by logging into the VM. When I hit continue it tells me it is starting the component and then comes back with the following message.
An error occurred while starting "OCMRepeater".
The component was not found in the Oracle Home.
On a fresh install I really think that my Overview pie chart should be a 100% up all green affair. Can anyone give me a hand and help me figure out how to get everything running properly here?
Thanks,
HaroldHi
I tried, but no luck.
./opmnctl status
Processes in Instance: EnterpriseManager0.rhel
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 2459 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 7308 | Alive
OC4J | home | 2460 | Alive
OC4J | OC4J_EM | 2461 | Alive
OC4J | OC4J_EMPROV | 2463 | Alive
WebCache | WebCache | 2496 | Alive
WebCache | WebCacheAdmin | 2464 | Alive
./oc4j_OCMRepeaterDeploy.sh $ORACLE_HOME
ADMN-300072
Base Exception:
OracleAS instance: Oracle Home: /u00/oms10g OC4J component: OCMRepeater is down
Resolution:
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=rhel:6201
no enabled components for this request
ADMN-300105
Base Exception:
J2EE application: OCMRepeater has already been deployed. Redeploy needs to be used to override previous deployed application
Resolution:
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rhel:6201
no enabled components for this request -
I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?
I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?
-
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
CS6 photoshop message 'could not load the fast core routines module because the file was not found'
my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it. my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
I have recently upgraded a solution from vs2008 to vs2010. This solution happens to contain several .rptproj file (SSRS 2008R2 reports). I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
into vs2010).
However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
TF10121: The path '' is not found or not supported. Type or select a different path.
I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
If I unbind the solution from source control the messages go away. Rebind and they return.
The problem doesn't always start straight away, it may take a few solution explorer clicks.
Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
E.g.
TF10121: The path '' is not found or not supported. Type or select a different path.
TF10121: The path '' is not found or not supported. Type or select a different path.
Audit.rdl has been automatically checked out for editing.
Then no errors until going back and clicking in solution explorer (which is using auto hide)
[See also:
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
Does anyone else out there share this problem or more importantly a solution/work around?Hi Evanw21,
Based on the current information, it seems to be the known issue described in the following KB article:
FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully.
References:
TF10121
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Overview of Leave --- CREATE OBJECT: The class was not found., error key:
Dear Gurus,
Iam facing this problem that, when i try to open the Leave Overview from the leave request screen. it gives the dump with message
CREATE OBJECT: The class was not found., error key: RFC_ERROR_SYSTEM_FAILURE
this also creates a dump in the back end.
The same dump is appearing when i try to view the Check Documents for the same employee from PTARQ.
Thanks in advance
RamnathHi ,
please find the following solution .it will definitely work .
If you leave configuration is done.
There was an incorrect data in your system. To do these please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver.
After this,, there will be some incorrect workitem in approver inbox.
You need to clear that also by Tcode - SWWL.
ALSO check the leave request workflow of that employee and if there is any error workflow lying in the workflow delete the leave request (which was created with error) Note down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and delete the documents ( give the id iniater in the document status ).
To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
After deleting it check in the portal for the leave request if any error is occuring when trying to apply for leave. -
i am unavailable to open inbox as well browser. message displayed on screen : shared webkit instance unavailable. failed to start UMP: (9) executable not found. as well it has start rebooting itself once till now. kindly help out me.
Thanksjawediqbal wrote:
i am unavailable to open inbox as well browser. message displayed on screen : shared webkit instance unavailable. failed to start UMP: (9) executable not found. as well it has start rebooting itself once till now. kindly help out me.
Thanks
I suggest you do a clean Reload or Update of your Operating Sysytem. Go here for instructions: How To Reload Your Operating System
Goodluck!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it. -
Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found
Hi and help,
have searched the web and found other forum threads with similar issues.
Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
so select it from Power options..."failed to start as CpuPerf.dll is not running"
Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
Been on Toshiba support and tried to install Power Saver......same problem won't install .
So help help help if possible.
Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
any help please
TimCheers for the advice Andrei,
so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
Sorry for more questions but as you can see this is not familair territory for me!!
many many thanks
Tim -
The row was not found at the Subscriber error keeps popup and stopped synchronization even after inserting missing record at subscriber - transcational replication.
first error throws: Grab exact sequence number, find row and inserted at subscriber...
Start synchronizing, ran fine for a while, stopped again with error with different exact sequence number, repeat again same as step 1.......
how can we stop this and make it run without this error?
Please advise!!!Hi,
This means that your database is out of sync. You can use the continue on data consistency error profile to skip errors. However, Microsoft recommends that you use -SkipErrors parameter cautiously and only when you have a good understanding of the following:
What the error indicates.
Why the error occurs.
Why it is better to skip the error instead of solving it.
If you do not know the answers to these items, inappropriate use of the
-SkipErrors parameter may cause data inconsistency between the Publisher and Subscriber. This article describes some problems that can occur when you incorrectly use the
-SkipErrors parameter.
Use the "-SkipErrors" parameter in Distribution Agent cautiously
http://support.microsoft.com/kb/327817/en-us
Here are two similar threads you may refer to:
http://social.technet.microsoft.com/Forums/en-US/af531f69-6caf-4dd7-af74-fd6ebe7418da/sqlserver-replication-error-the-row-was-not-found-at-the-subscriber-when-applying-the-replicated
http://social.technet.microsoft.com/Forums/en-US/f48c2592-bad7-44ea-bc6d-7eb99b2348a1/the-row-was-not-found-at-the-subscriber-when-applying-the-replicated-command
Thanks.
Tracy Cai
TechNet Community Support -
My Environment Canada weather app stopped working. When I start it states that the page is not found. It also stated this page no longer exists and this error is as a result of recent updates to the website.
Is this an error or has Environment Canada stopped supplying apple with the information or has Apple stopped accepting this information from Environment Canada? Where is the problem?Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...) -
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
I ran SP2 and SP2 for Language Pack successfully before.
Here is how it looks:
Product
Version
Status
Language Pack for SharePoint Foundation 2010 - Portuguese/Português (Brasil)
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Portuguese/Português (Brasil)
Installed
Microsoft Access Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Document Lifecycle Components Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2512800)
14.0.5138.5000
Installed
Microsoft Excel Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Excel Web App Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft InfoPath Form Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft OMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Project Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Portal Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Slide Library Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Visio Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Word Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft XMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
PerformancePoint Services in SharePoint 1046 Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010
Installed
Microsoft SharePoint Foundation 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft® Search Server 2010 Express
Installed
Microsoft Office Server Proof (Arabic) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (English) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (French) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (German) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Russian) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Spanish) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 English Language Pack
14.0.4763.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Search Server 2010 Express
14.0.4763.1000
Installed
Microsoft Shared Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Shared Coms English Language Pack
14.0.4763.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics English Language Pack
14.0.4763.1000
Installed
Microsoft Web Analytics Web Front End Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
However when I try to run February CU or December CU I get the error:
The expected version of the product was not found on the system
it's possible that I messed up because
I think I installed a SharePoint Server Service Pack 2 in a SharePoint Foundation Farm.
these are the files I ran:
1 - SP2 pt-br
oserversp2010-kb2687453-fullfile-x64-pt-br
2 - SP2 for Language Pack pt-br:
oslpksp2010-kb2687462-fullfile-x64-pt-br
3 - ran configuration wizard (had na error message the first time and success in the second try)
4 - December CU or February CU:
Download SharePoint Foundation 2010 February 2014 CU
The expected version of the product was not found on the system
In the first step I think I should have installed
wsssp2010-kb2687464-fullfile-x64-pt-br
Now I try to runthis and I get:
The update is already installed on the system.
Hopefully this is a QA Environment but it would be a pain to start over.
Any suggestion?
Thanks
J.CluaHi,
Here are all errors logged:
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [81606c80-44b3-47c9-8c24-136bdeb07d64]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 81606c80-44b3-47c9-8c24-136bdeb07d64 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [4b6e8a49-765d-47a1-92f8-91f61d07bbed]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 4b6e8a49-765d-47a1-92f8-91f61d07bbed is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [00bfea71-dbd7-4f72-b8cb-da7ac0440130]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 00bfea71-dbd7-4f72-b8cb-da7ac0440130 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: Found a missing feature Id = [5daabc0d-5714-4b95-9238-95d58704bc11], Name = [Blog Rating], Description = [This feature allows visitors
to rate blog posts], Install Location = [Blog Rating]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: The feature with Id 5daabc0d-5714-4b95-9238-95d58704bc11 is referenced in the database [WSS_Content_AcademiaTI], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_GlobalIT], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [DEBUG] [3/11/2014 5:25:49 PM]: Retrieving site definition for language 1046...
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 21 web(s) using missing web template 75801 (lcid: 1046) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75801 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 1 web(s) using missing web template 75802 (lcid: 1033) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75802 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-2d1e-451a-b445-16bc346d7d8e]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-2d1e-451a-b445-16bc346d7d8e is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-5f69-4282-83ae-22808c0fbfd9]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-5f69-4282-83ae-22808c0fbfd9 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-6e3f-4d4a-8f78-245bda567b60]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-6e3f-4d4a-8f78-245bda567b60 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-040e-4abb-b94b-32f1e7572840]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-040e-4abb-b94b-32f1e7572840 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-b5a0-47d5-90e6-4b3205b02278 is referenced in the database [[OWSTIMER] [SPContentDatabaseSequence] [ERROR]
[3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]], but is not installed on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature
and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [f7b9c169-1418-41f3-888f-8ac436e17a0a]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id f7b9c169-1418-41f3-888f-8ac436e17a0a is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-f13a-4670-8b69-97e90d05f7c8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-f13a-4670-8b69-97e90d05f7c8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-377d-4b4f-b864-984379ed0f42]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-377d-4b4f-b864-984379ed0f42 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-9d96-4f02-a800-a3512154efcd]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-9d96-4f02-a800-a3512154efcd is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [90cd055f-f21f-42c5-b3fe-bb67173583d4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 90cd055f-f21f-42c5-b3fe-bb67173583d4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-0017-4993-85fe-c37971507bbc]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-0017-4993-85fe-c37971507bbc is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-fe65-41c3-a965-c5df83fb098b]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-fe65-41c3-a965-c5df83fb098b is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-7c51-4a75-92c1-cbaccb371622]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-7c51-4a75-92c1-cbaccb371622 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-b0ef-434e-90d6-ce997d970564]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-b0ef-434e-90d6-ce997d970564 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-37d2-484b-b362-dcff1538e2a4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-37d2-484b-b362-dcff1538e2a4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [49c44827-4747-4e89-999c-f199ad95cfa8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 49c44827-4747-4e89-999c-f199ad95cfa8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-42e8-4527-8313-f63c4c49a7e6]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-42e8-4527-8313-f63c4c49a7e6 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-a4ce-4a83-867d-f6be0ffdd867]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-a4ce-4a83-867d-f6be0ffdd867 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.<nativehr>0x81020013</nativehr><nativestack></nativestack>
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Upgrade [SPSite Url=http://sjkqa41:7779] failed. Microsoft.SharePoint.Upgrade.SPSiteWssSequence has the ContinueOnFailiure bit set. Moving
on to the next object in sequence.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)
at Microsoft.SharePoint.SPFieldIndexCollection.IndexOneField(Object field, Boolean bIndexed)
at Microsoft.SharePoint.SPFieldIndexCollection.Add(SPField field)
at Microsoft.SharePoint.Upgrade.RestoreWorkflowAndDatasourceLibraryPermissions.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:37:44 PM]: Upgrade Timer job is exiting due to exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Upgrade completed with errors.
Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\Upgrade-20140311-164603-307.log.
The number of errors and warnings is listed at the end of the upgrade log file.
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()
at Microsoft.SharePoint.Administration.SPUpgradeJobDefinition.Execute(Guid targetInstanceId)
Despite all the erros, can I consider these farm updated in terms of SharePoint build?
Thanks
J.Clua -
The server was not found or was not accessible.
I've upgraded to a Windows 8.1 machine, and installed SQL Server 2012 (version 11.0.3128.0), and SQL Server Express 2008 R2 (v 10.0.5500.0).
I've created a database in the 11.0.3128.0 instance, and populated it by restoring it from a .BAK from another server.
I've opened Visual Studio 2012, and accessed the database via the Server Explorer, with no problem.
I've copied a running web app to this same machine, and opened it in Visual Studio 2012. But when I attempt to run in debug mode, my first attempt to access the database gives me this error:
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
Here's my connection string, as defined in the <connectionStrings> section of my App.Config:
<add name="EMSDataModelContainer"
connectionString="metadata=res://*/EMSDataModel.csdl|res://*/EMSDataModel.ssdl|res://*/EMSDataModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=xps-8500;Initial Catalog=EMS;Integrated Security=True;multipleactiveresultsets=True;App=EntityFramework""
providerName="System.Data.EntityClient" />
Thanks in advance.Hello,
Please read the following resources:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/20d8edf8-f36d-48ac-8623-c06e485448a3/i-have-a-problem-with-a-connection-to-database-sqlserver-2012?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?
Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Can I have more than one library for the same ipod nano?
I have a desktop pc that I have originally setup my nano on. I have about 400 songs on that computer. I have about 500 other songs on my laptop, can I put itunes on to both computers and have them add the songs from each one respectively without eras
-
After 10.3.1 update, device freezes
Hi, I found the my Q10 freezes after updating to os 10.3.1.1581 Customization ringtones works as expected only for calls, doesnt work for mails and other messages and also Customised LED dont work. Freezes once in while if i search for contacts and
-
Exchange SMS from my old Iphone to the new one?
I would like all of my sms textmessages to transfer from my old Iphone3 to the new Iphone4. Is this possible?
-
I need help...Monthly Photoshop Subscription Question...
Hello. I signed up for the monthly Photoshop Creative Cloud last year. I really only use Photoshop for some very basic things maybe 2x a month. I have read that I can get a free version with 2GB of storage for free. Is this true? And would this
-
IPad won't download apps or iOS 8.1.2
hello, i have a new iPad mini. After the initial set up it only downloaded a few apps and then would not continue or allow the download of any more. assuming it might be a software issue, I attempted to download the new version of iOS 8. It has now s