Problem starting up mini SAP
Hello,
I have installed mini SAP 4.6D on my laptop which uses Windows XP als the OS.
Now I want to start the SAP Gui and I get the following error message. Please help me out.
TCP/IP ERROR detected by Sapgui.
Time
Release 46D
Component NI(Network interface)
version 34
Return Code -1
Module ninti.c
Line 1174
Detail NiSocket
System Call WSASocket
Error No 10091
Error Text WSASYSNOTREADY: Network subsystem is
unavailable
Counter 2.
Does any one know how to get ride of this problem?
Thank you all so much.
Rudy!
Hello Rudy,
I've installed SAP NetWeaver AS ABAP 2004s & encountered a similar problem when starting SAP Logon.
But upon a close look at my system configuration it revealed that my Full computer name (or host name) was 15 character long as opposed to SAP's recommendation of 13 characters.
You should also check that by examining My Computer's properties.
Once you are done with that, uninstall & reinstall SAP (It worked for me like that).
Hashir Ahmed.
Similar Messages
-
Iu00B4ve gotten Problems with my mini-sap in ABAP objects book.
Sorry geeks , but I´ve already installed the dvd that contents the sap netweaver 2004s abap trial version , but I didn´t get any link to access the envirnment in my sap logon , what are the steps that I´ve to follow in order to get any link and access ???. thnx a lot.
IVE ALREADY DONE-
-
Problem while starting Mini SAP
In Mini SAP when clicking Start SAP MBS before calling SAPLogon-it is giving errors as-
Call clean-up function...
***ERROR=>SigICallExitRoutine: not initialized[Signt.C0239]
return from clean-up function...
(1)disp+work.exe has encountered a problem and needs to close.
(2)msg_server.exe has encountered a problem nad needs to close
What these errors means and how to resolve it.Thanks for the Reply.
But I didn't got any solution from it.
Please tell me for what purpose "disp+work.exe" and "msg_server.exe" is used and what problem they may encountered so they needs to close.
And how to to solve these problem. -
In Mini SAP when clicking Start SAP MBS before calling SAPLogon-it is giving errors as-
Call clean-up function...
***ERROR=>SigICallExitRoutine: not initialized[Signt.C0239]
return from clean-up function...
(1)disp+work.exe has encountered a problem and needs to close.
(2)msg_server.exe has encountered a problem nad needs to close
What these errors means and how to resolve it.Did your installation go will, I feel they where not loaded properly, the system is check for work process for message & dispatch.
Option:
1.Try to re-install, and before installation, delete all the files created during the previous process.
2.Try to increase the work process for message & dialog. And for background and update process you can reduce the same.
Prabhu Rajesh. -
SAP Netweaver 7.02 installation problem, "Start Instance" not possible??
Hello,
i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
here should the instance started, i receive this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
"Running but dialog queue stand still."
That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
Can anyone help me here please?
If need more information i can put here some logfiles?
Thanks for any help
MirsoHere is the next file dew_w0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 6896
M
M
M Thu Aug 07 20:23:20 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M
M Thu Aug 07 20:23:21 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:23:23 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:23:24 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C
C Thu Aug 07 20:23:25 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202324 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014830050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014C70050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CC80050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000002E30050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000002F70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002B00050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
B dbexpbuf: Buffer ESM (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
B dbexpbuf: Buffer CUA (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000133FFCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1500D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D150530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002B20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Thu Aug 07 20:23:26 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:23:27 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 6896
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7620
M
M
M Thu Aug 07 20:28:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DE60050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE60060
M DpShMCreate: allocated wp_adm_list at 000000000DE63030
M DpShMCreate: allocated wp_adm at 000000000DE63220
M DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
M DpShMCreate: allocated tm_adm at 000000000DE6AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
M DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
M DpShMCreate: allocated comm_adm at 000000000E3CD180
M DpShMCreate: allocated slock_adm at 000000000E45BB20
M DpShMCreate: allocated file_adm at 000000000E481CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
M DpShMCreate: allocated vmc_adm at 000000000E4C37E0
M DpShMCreate: allocated gw_adm at 000000000E4CADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
M DpShMCreate: allocated ca_info at 000000000E4CBD50
M DpShMCreate: allocated wall_adm at 000000000E4CBD70
M DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
M DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:28:45 2014
M ThInit: running on host BIG
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C
C Thu Aug 07 20:28:46 2014
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 202845 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014780050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BC0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBD0050, size: 2767448)
M SHM_PAGING_ADM (addr: 00000000124B0050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000012540050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002EF0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
B dbexpbuf: Buffer ESM (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
B dbexpbuf: Buffer CUA (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001334FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002F20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:28:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7620
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c 339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 46
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid 7828
M
M
M Thu Aug 07 20:33:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c 1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm) 156064 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm) 268880 (80)
M DpShMCreate: sizeof(vmc_adm) 30128 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:33:44 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:33:45 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.045) Unknown primary key (note 1459400)
C (0.039) Define your own command buffersize (note 1340617)
C (0.031) Dbm commands support added (note 1420733)
C (0.027) Count of records for bulk insert optimized (note 1340617)
C (0.021) Connect with special xuser key (note 1390464)
C (0.018) Error handling for external update statistics changed (note 1340617)
C (0.018) Dbsl procedure to update datasource information (note 1340617)
C (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C (0.013) Possibility to disable UPSERT statements (note 1340617)
C (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.01 Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX BC HC PRM RCT FRC TIM MAX OPT Date Time DBHost Program
B 000 000 R/3 000000000 ACTIVE NO NO NO YES NO NO 000 255 255 20140807 203345 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014760050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000014BA0050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001CBB0050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000005930050, size: 525344)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000005A60050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 30976 bytes (50 server) at 0000000002BC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
B dbexpbuf: Buffer ESM (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
B dbexpbuf: Buffer CUA (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
B dbexpbuf: Buffer OTR (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M
M Thu Aug 07 20:33:46 2014
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001322FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D190530
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 29124 bytes at 0000000002BE0050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.46.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [23]
W ===... Calling itsp_Init in external dll ===>
W PpioRecoverLocks, table: 000007FFE04EDB30
W PpioRecoverLocks, number of file locks 256
W PpioRecoverLocks: file lock set to: 0000000000000000
W PpioRecoverLocks: directory lock set to: 0000000000000000
W PpioRecoverLocks: global lock set to: 0000000000000000
W PpioRecoverLocks() done
W PprcRecoverLocks, table: 000007FFE04EE020
W PprcRecoverLocks: directory lock set to: 0000000000000000
W PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:33:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp 3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c 182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c 5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11087]
M
M Info for wp 0
M
M pid = 7828
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = -1
M req.rq_id = 65535
M req.rq_source =
M req.vm = no VM
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len -1 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c 339]
// END OF FILE
i hope that we can bring my sap to runing?
best regards
mirso -
Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?
Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!! -
Hello,
I have installed the Mini SAP with WAS 6.20 in my system, which has Windows XP. I was sucessfull in installing the Kernel CD and SAP GUI. So now the SAP logon icon appears on my desktop and i want to login. I have given the following details on it:
Description: Mini SAP
Application Server: hostname (as stated in the CD demo)
Systemnumber: 00(as stated in the CD demo)
So now the system appears on the logon and when i double click to the system to logon, it brings me an error.
Please do find the error:
partner not reached (host vaishali, service sapdp00)
component NI(Netwrok interface)
Release 620
version 36
module ninti.c
Line 979
error no 10061
error text WSAECONNREFUSED: connection refused
counter 1
Please help me out from this, any help will be greatly appreciated.
Thanks
Sanjeev.Hello Subash,
Yes I did, but any how I have solved this problem. In SAP Logon the host name was wrong, it is not identical with my computer name.
Now I have another question, is this Mini SAP useful only for ABAP or can we use for Best practices for example Customizing HR, MM etc etc. -
Problem: 503 Service Unavailable SAP WebAS Engine is starting...
Problem: 503 Service Unavailable
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
This problem occurs suddenly after a time interval when working on Sap Enterprise Portal. Please Suggest me Number of possible solutions for this type of problem.....
Thank's in Advance
Regards-
Sumeet SharmaHi,
The issue here is that the JAVA engine has not ye started completely. Check the status of the SAP instance in SAP MMC. You need to have the SDM, dipatcher, Server0 in green(started completely). If the server0 is in yellow/grey, then u will not be able to launch the portal URL.
Check and post us the dev_server0 log for more information.
Regards,
Varadharajan M -
Can't start Mini SAP: error "MSG_SERVER died"
Hello!
I have succesfully installed Mini SAP version 4.6D. When I try to start it, I get error messages "MSG_SERVER died" and later "DISPATCHER died". I can't figure out what could be wrong. Please help!
Below is a detailed command-prompt and SLOG00 file content. Although the content of the SLOG00 file is to me completely unreadable, maybe it means something to someone. Or, is there any log viewer for this?
Thanks in advance for all inputs!
Kind regards,
Igor Barbaric
COMMAND-PROMPT ECHO:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
C:\MBS>runmbs
C:\MBS>set DBMS_TYPE=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>rem del pxastat
C:\MBS>start /B msg_server.exe pf=MBS_D00.pfl
C:\MBS>disp+work.exe break pf=MBS_D00.pfl
dp Ctrl-C enabled
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
MSG_SERVER died => main: MsSInit
Thu Feb 10 13:37:23 2005
SemSpinning: 2200 usec for 27339 loops -> 12 loops per usec
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
DISPATCHER died => DpSapEnvInit: DpCommInit
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
SLOG00 content:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
aE002005021013372300 2140 0MS 0 046D 20.1-- 180--
iE102005021013372300 2140 0MS 0SCSA 4096 mQ012005021013372300 2140 0MS 0Msg Server 1 2140 MsSInitMSStartmsxxserv1212mQ0I2005021013372300 2140 0MS 0 getservbyname 0 NiPServgetservninti.c 0457mQ0A2005021013372300 2140 0MS 0 sapmsMBS NiIServNiPServnixxi_r.2303mQ022005021013372300 2140 0MS 0Msg Server 2140 MsSHaltMSStop msxxserv3931iE102005021013372400 2112 0DP 0SCSA 4096 mQ002005021013372400 2112 0DP 000 2112 DpSapEnDPStartdpxxdisp0863mQ0I2005021013372400 2112 0DP 0 WSASocket10091 NiPSockWSASockninti.c 1174mQ052005021013372400 2112 0DP 0 2112 DpHalt DPStop dpxxdisp6216
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Achim!
Thanks for a hint!
This is far more readable. I can see some error messages, but still don't know what to do. What might "network subsystem" mean?
Anyway, here's what the files say.
Kind regards,
Igor
DEV_MS:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
trc file: "dev_ms", trc level: 1, release: "46D"
Thu Feb 10 13:37:23 2005
***LOG Q0I=> NiPSocket: WSASocket (10091: WSASYSNOTREADY: Network subsystem is unavailable) [ninti.c 1174]
ERROR => NiILocalCheck: NiPSocket (rc=-1) [nixxi_r. 1758]
***LOG Q0I=> NiPSocket: WSASocket (10091: WSASYSNOTREADY: Network subsystem is unavailable) [ninti.c 1174]
ERROR => NiILocalCheck: NiPSocket (rc=-1) [nixxi_r. 1758]
relno 4640
patchlevel 0
patchno 194
intno 0
pid 2140
***LOG Q01=> MsSInit, MSStart (Msg Server 1 2140) [msxxserv 1212]
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 457]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsMBS) [nixxi_r. 2303]
ERROR => MsCommInit: NiListen(sapmsMBS) (rc=NIESERV_UNKNOWN) [msxxserv 6800]
ERROR => MsSInit: MsSCommInit [msxxserv 1254]
ERROR => main: MsSInit [msxxserv 3892]
***LOG Q02=> MsSHalt, MSStop (Msg Server 2140) [msxxserv 3931]
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DEV_DISP:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
trc file: "dev_disp", trc level: 1, release: "46D"
Thu Feb 10 13:37:24 2005
relno 4640
patchlevel 0
patchno 242
intno 0
pid 2112
***LOG Q00=> DpSapEnvInit, DPStart (00 2112) [dpxxdisp 0863]
MtxInit: -2 0 0
MBUF state OFF
MBUF opmode USE
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 64 MB
<ES> 63 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPSocket: WSASocket (10091: WSASYSNOTREADY: Network subsystem is unavailable) [ninti.c 1174]
ERROR => NiIListen: NiPSocket (rc=-1) [nixxi.c 0488]
ERROR => DpCommInit:: NiBufListen (rc=-1) [dpxxdisp 5707]
ERROR => DpSapEnvInit: DpCommInit [dpxxdisp 11011]
***LOG Q05=> DpHalt, DPStop ( 2112) [dpxxdisp 6216]
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<,,, -
Problem Starting SAP with Oracle
Dear Experts,
Our production system rebooted due to some electricity issue and since then we are not able to start SAP. We are on oracle 10g and AIX OS. We have done all the options but no avail.
Following is screen output when I run command : "startsap".
startsap
Checking ABC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 700 - AIX v10.35 5L-64 bit 070123*
Usage: saposcol -l: Start OS Collector*
saposcol -k: Stop OS Collector*
saposcol -d: OS Collector Dialog Mode*
saposcol -s: OS Collector Status*
The OS Collector (PID 884754) is already running .....*
saposcol already running
Running /usr/sap/ABC/SYS/exe/run/startdb
Trying to start ABC database ...
Log file: /home/ABCadm/startdb.log
No SQLNet V2 connect to ABC available.*
Check that the listener is running: "lsnrctl status".
Start the listener as user oraABC: "lsnrctl start".
/usr/sap/ABC/SYS/exe/run/startdb: Terminating with error code 14
DB startup failed
prodserver:ABCadm 2>
Any help & advice to solve this issue will be appreciated.Hi Mark
As I am Novice user, however I have check /oracle/SID/ directory for .sapenv., .dbenv. files but I didn't find any file.
Then I have executed "env" command as a "root", Output is written below.
env
_=/usr/bin/env
MABCATH=/usr/dt/man:/usr/share/man
SESSIONTYPE=dt
DTDATABASESEARCHPATH=//.dt/types,/etc/dt/appconfig/types/%L,/etc/dt/appconfig/types/C,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
LANG=en_US
LOGIN=root
G_BROKEN_FILENAMES=1
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/dt/bin:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
DTUSERSESSION=root-192.168.0.180-0
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
SESSION_SVR=atpserver
LC__FASTMSG=true
WINDOWID=23068728
IC_DOCUMENT_SERVER_TYPE=STANDALONE
EDITOR=/usr/dt/bin/dtpad
LOGNAME=root
MAIL=/var/spool/mail/root
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame
StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor
StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
IC_DOCUMENT_SERVER_MACHINE_NAME=standalone
LOCPATH=/usr/lib/nls/loc
TERMINAL_EMULATOR=dtterm
USER=root
AUTHSTATE=compat
SAPINST_JRE_HOME=/usr/java14_64/jre
XFORCE_INTERNET=True
DEFAULT_BROWSER=Mozilla
DISPLAY=192.168.0.180:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14_64
DTAPPSEARCHPATH=//.dt/appmanager:/etc/dt/appconfig/appmanager/%L:/etc/dt/appconfig/appmanager/C:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
HOME=/
IC_DOCUMENT_SERVER_PORT=64111
IC_DOCUMENT_DIRECTORY=/opt/IBM/aix
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/etc/dt/appconfig/icons/%L/%B%M.pm:/etc/dt/appconfig/icons/%L/%B%M.bm:/etc/dt/appconfig/icons/%L/%B:/etc/dt/appconfig/icons/C/%B%M.pm:/etc/dt/appconfig/icons/C/%B%M.bm:/etc/dt/appconfig/icons/C/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
TERM=dtterm
PWD=/
TZ=INDST+5:30
XMBINDDIR=/usr/dt/lib/bindings
DTHELPSEARCHPATH=//.dt/help/root-192.168.0.180-0/%H://.dt/help/root-192.168.0.18-0/%H.sdl://.dt/help/root-192.168.0.18-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/etc/dt/appconfig/help/%L/%H:/etc/dt/appconfig/help/%L/%H.sdl:/etc/dt/appconfig/help/%L/%H.hv:/etc/dt/appconfig/help/C/%H:/etc/dt/appconfig/help/C/%H.sdl:/etc/dt/appconfig/help/C/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/dt/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%L/%N.cat:/usr/dt/lib/nls/msg/%l/%t/%c/%N.cat:/usr/dt/lib/nls/msg/%l/%c/%N.cat
If you need I will send you output of "env" command as a "ora<SID>" & <SID>adm
Thanks for all your support -
Problem in Installation of SAP Netweaver CE 7.1 SP3
Hi,
I am trying to install SAP Netweaver CE 7.1 SP3 on Windows XP Professional. All the steps are executed sucessfully till Step 26 where it gives an error when it tries to
"Creating SAP start service of instance CE1 SCS01"
It says that the "Service didn't come up in 40 seconds" and if you retry the installation is terminated in 1 min with the error :
Selfextractor error
iaextract.c:888: child has signaled an exec error. Keeping directory C:/DOCUME1/I047488/LOCALS1/Temp/sapinst_exe.2620.1195815840
In the SAP MMC only one server can be seen with the processes;
msg_server.exe
enserver.exe
gwrd.exe
All these processes are running in green.
Please reply ASAP.
The last part of the sapinstdev_log is :
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1
\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </p> </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from guiHi All,
I faced the same problem on WinXP Pro SP2, SP3 and on Win2k3Server although all the installation requirements are fulfilled. I have the same problem with SP5 downloaded from SDN which was released recently.
I could install successfully SP1(Trial Version) from a DVD that came with the book "Developer's Guide to SAP NetWeaver Composite Environment". This was packaged using "Install Anywhere".
So, I think it is a problem with SAPInst. Could anyone help to solve this problem?
Your suggestion is highly appreciated.
Thanks & Regards - Tarini P Mohanty -
Mini SAP 7.01 under Windows Vista
Hi every one,
I wanna share my experience with you for installing version 7.01 under Vista. This might help you.
I have installed the newest version ([Message from Klaus Keller| of Mini SAP under Windows Vista and, believe it or not, it all went correct. It is important that you download version Netweaver 7.01, since previous versions are not supported in Vista.
In the download section (http://www.sdn.sap.com/downloads/netweaver/abap/disclaimer.html) you find in file part 1 the description of process in a HTML & PDF file. You must pay much attention to what is described there; otherwise, it might happen that the installation process is not sucessful.
I´m not gonna describe the whole installation process. This is already in the download files. Just a reference of what I did:
1 ) make a backup of your information and have your Windows Vista disk at hand. It might happen that you have to format the computer´s hard disk if something goes wrong (this happened to me a couple of times in previous versions of Mini SAP and Windows XP). This is so, because it is impossible to erase some files and information in the registry (even with the Registry Clean Tool that is also downloadable in SDN). A new installation try was hopeless in those versions.
2) shut the firewall and antivirus off before you start.
3) don´t try to name your computer using special characters like - _ / & % and so on; additionally, name should be max. 13 characters long.
4) you need a user account for windows, even if you´re the only one to use the computer and you must assign a password to that user. You need it once you start the server through the SAP management console.
5) Install the Microsoft loopback adapter
once installed, system names it LAN-connection2 and you must asign a permanent IP address. Press button characteristics for its element Internet protocol version 4, where you enter:
IP-Address 10.10.0.10
Subnetwork mask 255.255.255.0
Don´t touch element Internet protocol version 6 !!
6) file hosts under c:windowssystem32driversetc --> add an entry for the host like this:
#Inicio de insercion
10.10.0.10 jalonso "<-- this is my computer´s name and host name
You must have administrator rights and change the status write-protected for being able to modify it.
7) Process takes less than 1 hour, mostly without user interference.
8) if desired, install Adobe LifeCycle Designer before starting with SAP GUI. It happened to me once (Windows XP) that the installed SAP GUI was erased during installation of LifeCycle. It all then turned into a big mess and I had better to format the hard disk.
9) install SAP GUI on your computer, which is part of the downloaded files.
If installation was sucessful, it might happen that you experience a problem when starting the application server (start --> SAP Netwaever 7.01 --> NSP --> Start application server). You get a red screen with a couple of error messages ([read my post|;). It is not a very serious problem, ´cause you can start the server with the SAP management console anyway.
Hope this helps you when installing Mini SAP 7.01 in your computer.I am having a heck of a time with this install. My OS is Windows Vista Ultimate.
I've read and re-read several forums and tried all the recommendations.
I've tried installing many time now and each time the install runs to 19% and I get a message " stopping Xserver".
Then it runs to 20% and I get a message "preparing packages for installation".
Then it runs for about 3 seconds and I receive the following:
Errors occurred during the installation.
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
Below is the text from the log file:
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Nov 4, 2008 10:49:38 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:38 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, java.lang.StringIndexOutOfBoundsException: String index out of range: -60
STACK_TRACE: 24
java.lang.StringIndexOutOfBoundsException: String index out of range: -60
at java.lang.String.substring(Unknown Source)
at com.sap.installshield.maxdb.DBEnumProcessHandler.enumerateForUninstall(DBEnumProcessHandler.java:179)
at com.sap.installshield.maxdb.maxdb_call_sdbinst.uninstall(maxdb_call_sdbinst.java:362)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I hope that I'm ovelooking something simple and that someone can point me in the right direction to get this up and running.
Any help would be greatly appreciated!!!!
Barbara -
Hi there,
I hope someone can help me with the question.
Ive bought the ABAP objects book called An Introduction to Programming SAP Applications from Horst Keller and Sascha Kruger (black color). There are 2 CD's to install the application Mini Basis SAP and work with the ABAP workbench. I was able to install that on a pc Win2000 and it worked and that pc had no sql server/database installed
But I've now another pc Windows XP and has has SQL 2005 Dev edition. I need to keep this.
My problem is when I try to install the Mini Basis I get error. Is it because of Ive already installed the Ms SQL 2005 dev edition?
Im using Windows XP prof edition. How can I install on XP pro this software on my pc keeping the SQL 2005?
I have tried resume_setup.bat and also enabled remote_services for the registry update. no hope.
Can someone please help?
Cheers, mesut
Book reference: ISBN 0-201-75080-5 (SAP Press)Hi Sravan,
That's exactly what I did. I bought the book and I try install on Win XP pro with SQL 2005 dev edition pre-installed.
I'm in possession of the Mini SAP, I own the book. I also looked at the site you suggested
http://www.sap-img.com/mini-sap.htm.
It seems to be I should be able to install on WIN XP pro due to the site above.
This is how a work
1) CD 1 starts with home page
2) I choose REsume (because I have already pre-installed the SQL 2005)
3) Setup starts
4) asks me which directory, it proposes C:\MBS -- I accept
5) It asks me where is the DATA and the KERNEL CD --- it proposes D: ---I accept
6) at the mean time I click on switch view and I see the logs and this is finally I get (I just copy/paste below the errors no the whole log)
So I don't know how to proceed further. I contacted SAP and they propose me this forums.
Could you please advice?
thanks mesut
Error: DBCOMMONDBENV_IND_MSS SubstituteVariables 2 416
The function RegOpenKeyEx with the parameterlist
(Software\Microsoft\MSSQLServer\MSSQLServer\Parameters) returned with error code 2 and error text:
The system cannot find the file specified.
Error: DBCOMMONDBENV_IND_MSS InstallationDo 2 416
Phase failed.
Error: Main {} 2 416
Installation aborted. -
Mini SAP 6.2: Executing First BSP Page
Hi All,
I am trying to execute the first BSP in Mini SAP 6.2. Getting the following error : Business server PAGE (BSP) error BSP exception: The URL does not contain complete Domainangabe. Even i tried to configure domain using Tcode RZ10, INSTANCE PRofile. I selected the Radio buttong Extended maintenance. THere also i am getting another error (Server p72367_BSP_00 is not active - action cannot be executed). Could any please tell me how to configure the FQDN. I already gone thro "BSP In-Depth: Fully Qualified Domain Names". But i couldnt solve the problem.
Thanks in advnce.
Raja TSteps to follow for configuration
1) Transaction SMICM
2) Goto Parameters --> Display
There should be a parameter icm/host_name_full with value as <saphost.sap.com> not just <saphost>
That is ,the url should be specified as Protocol>://<Hostname>.<Domain>.<Extension> :<Port>/
If it is not there and host name is just <server name> then do following:
Transaction RZ10
a) View profiles ,if no profile then press Import .
This will generate the profiles available (5 profiles), namely :
1)Default profile
2) Instance profiles
3)Start profiles
In instance profile of sap system (SID>_<INSTNAME>_<hostname>)
in Extended maintenance option,
b)Copy Profile to new Version
c) Create a new Parameter in the profile.
Select the icm/host_name_full in the parameter name and put the value <servername.domain.extension>
d) Save parameter and the profile and then Activate .This will create a new version of the profile.
e ) Then restart ICM.
Profile creation requires Admin rights for user for profile to be generated correctly.
Regards,
Ravikiran.
Maybe you are looking for
-
How to update a custom field of MARC table using BAPI_MATERIAL_SAVEREPLICA
Hi, I want to update a custom field (Appended field) of MARC table using BAPI_MATERIAL_SAVEREPLICA. Please help me in this issue. I cannot use BAPI_MATERIAL_SAVEDATA as this updated the MARC table record by record. I have to update bulk records at a
-
I am running iTunes 10 on XP Pro and it will no longer play those mp3 files which I have created by conversion from wav files. I tried to delete some from the library and then re-add them but iTunes will not add them back to the library. Can anyone
-
Im am using a labview RT with PCI-7030 DAQ board and a CB-68LP .This is urgent.can somebody please help?
-
How do I get rid of the itunes store in the playlists?
Still trying to figure out version 6.0.3. In itunes 4.7, under general prefs you could turn off the itunes store and it wouldn't appear in the playlists sidebar. I've de-selected "show links to itunes store" under General. I've tried deleting it with
-
I cannot enable save passwords!
When I go into tools, options, security, the save password option is not highlighted and working. It has worked in the past, but is now not enabling me to activate the option.