Problem starting with solution manager

hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes.  After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
These are some errors that I can find in workdir
Tue Jan 27 15:08:51 2009
ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
t.c    473]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c  9618]
ERROR => ErrTrace: no error info available [err_mt.c     1507]
Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
>TS> Tue Jan 27 15:10:51 2009
T:4398099755584 ======> Connect to SAP gateway failed
Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
System is a Suse/Linux  ppc64, with MaxDB as database
Please help me!!
hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes.  After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
These are some errors that I can find in workdir
Tue Jan 27 15:08:51 2009
ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
t.c    473]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c  9618]
ERROR => ErrTrace: no error info available [err_mt.c     1507]
Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
>TS> Tue Jan 27 15:10:51 2009
T:4398099755584 ======> Connect to SAP gateway failed
Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
no SAP ErrInfo available
System is a Suse/Linux  ppc64, with MaxDB as database
Please help me!!

hi,
there is anyone who can help me?
Many Thanks
Fabrizio

Similar Messages

  • RFC problem (CTS with Solution Manager)

    Hi everybody,
    I'm configuring a transport landscape with Solman.
    For demo purpose I created 3 clients in a Sandbox system (SBX), which should function like a 3-system-landscape. I created a transport domain in Solman (SM1) and added SBX into the domain (SM1 and SBX are not in one transport directory). The transport routes are configured from SBX:810 - SBX:820 - SBX:830. After I distributed the configuration, I can also see routes in SBX.
    I also used SOLMAN_SETUP to generate the RFC connections to every client (READ and TMW), also to SBX:000 and SM1:000.
    Then I created a Solman Project and wanted to configure the IMG-Project in "System Landscape" tab (so that I can use this project for CTS). But as I tried to create the IMG, I got an error:
    S:No RFC authorization:000  function module SPROJECT_CREATE_NO_DIA_R.
    Message no. No RFC authorization000
    Can somebody give me a hint?
    Another problem is, I created a customizing request and a workbench request in SBX:810, I can see them in SE09 in SBX, but in SM1 I cannot see them! I also don't understand here...
    I'd preciate any help from you!

    Hello Charlie
    Seeing all the STMS queus in Solution Manager is no problem. The way we have set it up is that the Solution Manager is the TMS domain controller and all systems are included into the TMS domain of the Solution Manager.
    That makes the STMS queues of the managed SAP systems visible in transaction STMS.
    About two years ago SAP showed plans for a new layer for CTS called CCTS (central CTS) which would only be available on Solution Manager and it's purpose would be even more features and central transport request management. However CCTS has vanished from the radar. It's no longer mentioned and at SAP TechED 2011 it was nowhere to be found.
    Using CHARM the idea is also that person X creates a request which then a developer Y can use to insert objects into. Why? Segregation of duties is the answer. Creating a request is always done in the managed SAP system, using RFC you will jump to SE01 or another respective transaction to create the request.
    QGM and CHARM add another layer (control) on top of CTS, that's how you should visualize it. If you look up presentations on CCTS you will be able to visualy see that.
    You can read up on CHARM on https://service.sap.com/solutionmanager
    There are also interesting SAPPress books available
    The customizing option is to be found in SE09 I believe but I'll check tomorrow and update this reply because I'm on my iPad now without SAP system available.
    The obligation is then you must have an IMG_Project in your managed SAP system that has been CTS enabled. Creating such an img project is easy, transaction spro_admin, fill in title, save, go to tab transport request (or something) and enable the project for CTS.
    Kind regards
    Tom

  • Big Problem With Solution Manager EHP1 ?

    Dear all,
    I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
    The program inform that:
    "Runtime Errors: Message Type Unknow
    What happened:
    Error in ABAP Application program
    The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
    it has come across a statement that unfortunately cannot be excuted.
    etc
    Do you know about this problem, what is the errors ?
    Thanks all.

    Dear all.
    With Solution Manager EHP1
    SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
    SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
    Detail log as below:
    Runtime Errors         MESSAGE_TYPE_UNKNOWN
    Date and Time          28.04.2009 16:47:15
    Short text
    Message type " " is unknown.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Only message types A, E, I, W, S, and X are allowed.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_UNKNOWN" " "
    "SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
    "SPROJECT_SYSL_CHECK_CENTRAL_SY"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
    "SPROJECT_SYSL_CHECK_CENTRAL_SY".
    The main program was "SAPLS_IMG_TOOL_5 ".
    In the source code you have the termination point in line 29
    of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

  • SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19

    Hi,
    Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
    Also system is not showing any data in Introscope Dashboard. Any guess for this?
    Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
    Still no data and still in SMD Agent logs saposcol service warning is there.
    Thanks & Regards,
    Manish Singh

    Hi Jansi,
    Thanks for the reply..
    Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
    Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error      com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
    [EXCEPTION]
    com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
    at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
    at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
    at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
    at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
    at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
    at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
    at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
    at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
    at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
    ... 25 more
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
    [EXCEPTION]
    com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
    at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
    This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
    Usage:  saposcol -l: Start OS Collector
            saposcol -k: Stop  OS Collector
            saposcol -d: OS Collector Dialog Mode
            saposcol -s: OS Collector Status
    The OS Collector (PID 1552388) is already running .....
    Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
    [EXCEPTION]
    java.lang.NullPointerException:
    at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
    at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
    at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
    at java.lang.Thread.run(Thread.java:664)
    Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
    Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
    We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
    Any ides or help steps to do that?
    Thanks,
    Manish Singh

  • SAP NW 7.4 as java system sync with solution manager system 7.1 issue

    Dear all,
    I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
    For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
    Below are the activities completed:
    1) Through template installed I have rgeisterd the system into Solman SLD.
    2) Sync completed succfully exact product version is shwoing in solman SLD
    3) after that I have checked in SMSY and LMDB its showing prefectly
    4) But in SMSY its shwoing only under technical system,not showing product systems
    5) I have assigned in product system in LMDB
    Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
    I ma getting belwo error.
    No system found for this product/product instance
    Message no. SOLAR_SPROJECT110
    Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
    Advance Thanks

    Hi,
    re-check if the 7.4 system is correctly registered in the solman SLD system.
    Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
    Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
    Please note - SLD -> LMDB -> SMSY.
    So, if the first 2 don't have the correct information, you wont have much joy with smsy.
    Rgds
    Deepak

  • System Monitoring with Solution Manager Ehp1

    Hi,
    I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
    Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
    Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
    when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
    <SID>_RZ20_COLLECT
    <SID>_RZ20_ANALYZE
    I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
    <SID>_RZ20_COLLECT_123539Error when opening an RFC connection
    Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
    Error during remote call of SALC function: Error when opening an RFC connection
    Error during remote call of RFC1 function: Error when opening an RFC connection
    I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
    Please, Could you help me?
    Thanks and regards,
    Tomas.

    Tomas,
    I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system).  I downloaded the lates ccmsagent file from the market place based my target system configurations.
    Herewith attaching the logs while I'm trying to check the profile parameter.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    ================================================================================
    ***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
    ***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
    ***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
    ***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
    ***WARNING: Unexpected parameter: dbs/io_buf_size =100000
    ***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
    ***WARNING: Unexpected parameter: rsau/selector1/class =35
    ***WARNING: Unexpected parameter: rsau/selector1/severity =2
    ***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
    ***ERROR: Size of shared memory pool 40 too small
    ================================================================
    SOLUTIONS: (1) Locate shared memory segments outside of pool 40
                   with parameters like: ipc/shm_psize_<key> =0
    SOLUTION: Increase size of shared memory pool 40
              with parameter: ipc/shm_psize_40 =1472000000
    Shared memory disposition overview
    ================================================================
    Shared memory pools
    Key:   10  Pool
                Size configured.....:   642000000 ( 612.3 MB)
                Size min. estimated.:   637597428 ( 608.1 MB)
                Advised Size........:   640000000 ( 610.4 MB)
    Key:   40  Pool for database buffers
                Size configured.....:  1048000000 ( 999.4 MB)
                Size min. estimated.:  1468229308 (1400.2 MB)
                Advised Size........:  1472000000 (1403.8 MB)
    Shared memories inside of pool 10
    Key:        1  Size:        2500 (   0.0 MB) System administration
    Key:        4  Size:      523648 (   0.5 MB) statistic area
    Key:        7  Size:       14838 (   0.0 MB) Update task administration
    Key:        8  Size:    67108964 (  64.0 MB) Paging buffer
    Key:        9  Size:   134217828 ( 128.0 MB) Roll buffer
    Key:       11  Size:      500000 (   0.5 MB) Factory calender buffer
    Key:       12  Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
    Key:       13  Size:   200500000 ( 191.2 MB) Alert Area
    Key:       16  Size:       22400 (   0.0 MB) Semaphore activity monitoring
    Key:       17  Size:     2672386 (   2.5 MB) Roll administration
    Key:       30  Size:       37888 (   0.0 MB) Taskhandler runtime admin.
    Key:       31  Size:     4806000 (   4.6 MB) Dispatcher request queue
    Key:       33  Size:    39936000 (  38.1 MB) Table buffer, part.buffering
    Key:       34  Size:    20480000 (  19.5 MB) Enqueue table
    Key:       51  Size:     3200000 (   3.1 MB) Extended memory admin.
    Key:       52  Size:       40000 (   0.0 MB) Message Server buffer
    Key:       54  Size:    20488192 (  19.5 MB) Export/Import buffer
    Key:       55  Size:        8192 (   0.0 MB) Spool local printer+joblist
    Key:       57  Size:     1048576 (   1.0 MB) Profilparameter in shared mem
    Key:       58  Size:        4096 (   0.0 MB) Enqueue ID for reset
    Key:       62  Size:    85983232 (  82.0 MB) Memory pipes
    Shared memories inside of pool 40
    Key:        2  Size:    31168040 (  29.7 MB) Disp. administration tables
    Key:        3  Size:   114048000 ( 108.8 MB) Disp. communication areas
    Key:        6  Size:  1064960000 (1015.6 MB) ABAP program buffer
    Key:       14  Size:    28600000 (  27.3 MB) Presentation buffer
    Key:       19  Size:    90000000 (  85.8 MB) Table-buffer
    Key:       42  Size:    13920992 (  13.3 MB) DB TTAB buffer
    Key:       43  Size:    43422392 (  41.4 MB) DB FTAB buffer
    Key:       44  Size:     8606392 (   8.2 MB) DB IREC buffer
    Key:       45  Size:     6558392 (   6.3 MB) DB short nametab buffer
    Key:       46  Size:       20480 (   0.0 MB) DB sync table
    Key:       47  Size:    13313024 (  12.7 MB) DB CUA buffer
    Key:       48  Size:      300000 (   0.3 MB) Number range buffer
    Key:       49  Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
    Shared memories outside of pools
    Key:       18  Size:     1792100 (   1.7 MB) Paging adminitration
    Key:       41  Size:    25010000 (  23.9 MB) DB statistics buffer
    Key:       63  Size:      409600 (   0.4 MB) ICMAN shared memory
    Key:       64  Size:     4202496 (   4.0 MB) Online Text Repository Buf.
    Key:       65  Size:     4202496 (   4.0 MB) Export/Import Shared Memory
    Key:     1002  Size:      400000 (   0.4 MB) Performance monitoring V01.0
    Key: 58900130  Size:        4096 (   0.0 MB) SCSA area
    Nr of operating system shared memory segments: 9
    Shared memory resource requirements estimated
    ================================================================
    Nr of shared memory descriptors required for
    Extended Memory Management (unnamed mapped file).: 64
    Total Nr of shared segments required.....:         73
    System-imposed number of shared memories.:       1000
    Shared memory segment size required min..: 1472000000 (1403.8 MB)
    System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
    Swap space requirements estimated
    ================================================
    Shared memory....................: 2050.4 MB
    ..in pool 10  608.1 MB,   99% used
    ..in pool 40  999.4 MB,  140% used !!
    ..not in pool:   34.4 MB
    Processes........................:  716.8 MB
    Extended Memory .................: 8192.0 MB
    Total, minimum requirement.......: 10959.2 MB
    Process local heaps, worst case..: 1907.3 MB
    Total, worst case requirement....: 12866.5 MB
    Errors detected..................:    1
    Warnings detected................:    9
    After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
    Pls have a look at these two and let me know what could I do to proceed further.
    tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
    INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
    INFO: Central Monitoring System is [SMP]. (found in config file)
          additional CENTRAL system y/[n] ?   :
    INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
    INFO:
          CCMS version  20040229, 64 bit, multithreaded, Non-Unicode
          compiled at   Jun 28 2010
          systemid      324 (IBM RS/6000 with AIX)
          relno         6400
          patch text    patch collection 2010/1, OSS note 1304480
          patchno       335
    INFO Runtime:
          running on    saptqa01 AIX 3 5 00069A8FD600
          running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
    INFO profile parameters:
          alert/MONI_SEGM_SIZE = 200000000
          alert/TRACE          = 1
          SAPSYSTEM            = 30
          SAPSYSTEMNAME        = TQA
          SAPLOCALHOST         = saptqa01
          DIR_CCMS             = /usr/sap/ccms
          DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
          DIR_PERF             = /usr/sap/tmp
    INFO:
          pid           4165682
    INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
    INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct  3 2008,  kernel 6400_20020600_254,  platform 324 (IBM RS/6000 with AIX)]
            segment status     ENABLED
            segment started at Tue Sep 14 09:35:56 2010
            segment version    20040229
    ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
           Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
           Please change configuration with profile parameters
               ipc/shm_psize_01 = -<different pool nr>
           xor
               ipc/shm_psize_13 = -<different pool nr>
    EXITING with code 1

  • Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

    Hi,
    I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
    Using qtp in integrated mode worked previously on the solution manager 7.1 system.  Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
    I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
    Sincerely,
    David
    Edited by: David Snyman on Mar 2, 2012 7:38 AM

    Hi Sida,
    Can you check SapLogon.ini file maintaining below location please.
    let me know it resolve the isse, can you forward your details to <email removed by moderator>
    looking forward your response.
    Regards
    Naveen
    File Location
    Use
    C:\Windows\saplogon.ini
    Enable QTP to identify the Solution
      Manager Server
    C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
    Auto log on to SAP Systems for testing
    C:\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      64 Bit OS
    C:\Program Files
      (x86)\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      32 Bit OS
    Message was edited by: Manish Kumar

  • Solution Monitoring configuration with solution manager 4.0

    Hi Friends,
    I have to the Solution Monitoring configuration with solution manager 4.0.
    Please provide steps or screen shot if any body having that.

    Hi,
    Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Message was edited by:
            Raguraman C

  • PCI or PIC intergration with Solution Manager

    Hi Gurus
    am investigating the intergration of PIC or PCI (not sure) intergration with Solution Manager has any of you done the intergration or know of any consulting company that have done it
    Tx

    Hi,
    Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Message was edited by:
            Raguraman C

  • CCMS-functinality with Solution Manager 4.0

    Hello,
    I am seeking for the documentation regarding the setup and use the CCMS-functionality with Solution Manager 4.0
    Is there some documents describing this feature in details?
    Thank you!
    regards
    Axel

    Hi,
    Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Message was edited by:
            Raguraman C

  • Help Needed: HP QTP/UFT integration with Solution Manager

    Hi Experts,
    We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
    Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
    Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
    Detailed steps for replicating the issue:
    Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
    2.     Open Unified Functional Testing (UFT) 12.00
    3.     Click File -> New -> Test
    4.     Type even a dummy script in the Action window
    5.     Save Test Script by clicking File -> Save <test name> As…
    6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
    7.     Error Message appears
    Note:
    One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
    I am asked if I want to overwrite existing test in Solution Manager.

    Hi,
    I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
    Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
    Error:
    Message
    SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner <IP>:3300' not reached
    TIME        Tue Jan 19 12:02:17 201
    RELEASE     710
    COMPONENT   NI (network interface)
    VERSION     39
    RC          -10
    MODULE      nixxi.cpp
    LINE        3286
    DETAIL      NiPConnect2: 192.12.353.12:3302
    SYSTEM CALL connect
    ERRNO       10060
    ERRNO TEXT  WSAETIMEDOUT: Connection timed out
    COUNTER     1
    Could you please guide?
    Regards,
    Raichand

  • How to setup CCMS with Solution Manager

    Hi, All
    My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
    Is that RFC connection using both sites, trusted and satellite system ?
    I would like to setup CCMS alerts through Solution manager and R/3 ccms
    please anyone has some guide or URL or any idea send me
    We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
    Thanks in advanced
    J
    Edited by: issue2008 on Sep 19, 2008 12:13 PM

    you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

  • Transport Management System with Solution Manager

    Dear all,
    Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
    Do you know how to config solution manager for TMS and documents related with this function please guide for me!
    Thanks all very much !

    Hi,
    Check this link.
    https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
    Hope this answers your questions.
    Feel free to revert back.
    -=-Ragu

  • Evaluation system with Solution manager

    has anyone added an evalaution system where a user who logged a support message can evaluate the Solution given, with Solution manager. Basically the same thing like SAP have. When you close a call you have to rank the messageeg in regards of qaulity of answer etc etc..,
    Anyone that might have any ideas how to do this, could you please give me some direction to how I can implement an evaluation system.
    I thought of having a URL added to confirmation message, where the user can click on to take him to some area where he could evalaute the message. This systems is then linked to Solution  manager so that I can report on these messages and the evealuation received for these support answers.
    I will appreciate any feedback and  any ideas would be most welcome to help me to get to a method of implementing such a evaluation system or developing such a system.

    Dear Johan,
    Firstly the kind of scenario that you are trying to implement is not possible via the standard configuration of Support Desk.
    What I can think of is probably creating an action while closing the message which generates a form for the user to be filled and saves the values into an custom table for questions based on evaluation of the solution.
    Later you can generate reports based on this table.
    Regards
    Amit

  • Problem starting with NWDS

    Dear All,
    i have a problem starting with netweaver developer studio.
    once it is opened , it is not responding......same application is staring again......keep not responding.........
    can anyone help me to solve this

    Hello Sithi,
    The information you provided is not sufficient to understand the problem situation.
    Give more infos like:
    1. NWDS version
    2. Did your NWDS work before properly or is it a new installation making problems are installing.
    3. Check the log file in NWDS for Errors
    Also my advice would be to:
    1. Close NWDS
    2. delete the contents of workspace directory =>
    %user_home%\Documents\SAP\workspace\
    (%user_home% = your home directory)
    3. After deleting just start NWDS.
    Greetings,
    Praveen Gudapati
    p.s. Points are always welcome for helpful answers

Maybe you are looking for

  • How to apply common View criteria for all LOV View programatically?

    Hi, In my application I use nearly 100 VOs, which will be mapped as LOV to some base VOs. These VOs are not only for LOV but also will be used directly in screen as read-only table. All these VOs contains EFF_BGN_DTand EFF_END_DT. Requirement is to d

  • Problem displaying picture stored in mySQL

    Hi, i just have got problem displaying picture stored in database as BLOB and presented on JSP over servlet. Below is my code i am using to upload file into database, than download it and display again. The result is the picture can not draw inself a

  • Problem with combobox

    I have a panel in table view. One of the fields, I have changed to a combo box. It works good except for one problem. When testing, I set the text in the field using the combo box. If I go directly to another record, in the same column, when i change

  • Oracle Linux 6.2 with RH compatible kernel .versus. Red Hat Linux 6.2 diff?

    Hello everyone * assume that I booted Oracle Linux 6.2 with a Red Hat Compatible Kernel - as opposed to booting the Oracle Linus 6.2 with UEK R1 or UEK R2 kernels * I am interested in any feature differences between the two OS relating to: functional

  • Provisioning to Exchange 2007 failing

    Hi All, I have installed the Exchange 2007 connector to create the mailbox of the users in the Exchange 2007. This requires Remote manager as well so did the configuration of the remote manager as per the guide. Now when i try to provision the user t