Problem staying connected to my Wireless Network with my HPPhotosmart e-All-in-One Printer - D110a
I just bought a new HP wireless printer replacing my old HP wireless printer which the wireless part worked fine, but the printing died.
New printer HPPhotosmart e-All-in-One Printer - D110a. I have installed and re-installed the software and drivers but can't get my printer to stay connected to my laptop. I have a Linksys "WRT54GL router but have the printer set with a static IP address. When I run tests on the computer and printer everything says it is fine. But every 30 seconds or so.. my printer goes offline on my computer and is especially noticeable when I am using the HP Solution center because it will keep blinking in the windows bar. I have talked to 4 technicians but no one can figure out what the problem is. They keep saying that it is on my end, but the old printer which was also an HP (Wireless 6150) never had any problems and I have not changed anything in my routing. Is anyone else having this kind of problem and has found a successful solution? Any help would be greatly appreciated.
My computer is running Windows XP SP3
Currently my router has WEP encryption, but I tried them all just to see if that had anything to do with it. (WEP works best for me since I have some devices which can only use WEP to communicate).
Thanks.
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.18.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
Problem staying connected to my Wireless Network with my HPPhotosmart e-All-in-One Printer - D110a
I just bought a new HP wireless printer replacing my old HP wireless printer which the wireless part worked fine, but the printing died.
New printer HPPhotosmart e-All-in-One Printer - D110a. I have installed and re-installed the software and drivers but can't get my printer to stay connected to my laptop. I have a Linksys "WRT54GL router but have the printer set with a static IP address. When I run tests on the computer and printer everything says it is fine. But every 30 seconds or so.. my printer goes offline on my computer and is especially noticeable when I am using the HP Solution center because it will keep blinking in the windows bar. I have talked to 4 technicians but no one can figure out what the problem is. They keep saying that it is on my end, but the old printer which was also an HP (Wireless 6150) never had any problems and I have not changed anything in my routing. Is anyone else having this kind of problem and has found a successful solution? Any help would be greatly appreciated.
My computer is running Windows XP SP3
Currently my router has WEP encryption, but I tried them all just to see if that had anything to do with it. (WEP works best for me since I have some devices which can only use WEP to communicate).
Thanks.Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.18.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
How do i get my macbook to stay connected to my wireless network . i have to constantly rejoin it when i go online.
WayneOpen System Preferences > Network > Advanced, and see if your network appears in Preferred Networks. If not, do it
-
Unable to connect to home wireless network with my iPod touch
I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
Thank you for all suggestions and your help.I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.
-
Problem in Printing with HP Deskjet F370 All-in-One Printer
Product Name and Number: HP Deskjet F370 All-in-One Printer
Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge (C9351AA)
Colour - HP 22 Tri-color Inkjet Print Cartridge (C9352AA)
Operating System Installed: Windows 7 Home Premium (64 Bit)
Hi,
I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
I am unable to print anything in red or brown colour.
The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
I have done alignment of printer cartridges and also reset the printer.
However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
Whenever I am trying to print anything in brown it is coming out in green colour.
I don't know what to do....Please help.
Thanks
Suvadeep Paul
Thanks
Suvadeep PaulHi there,
This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
This problem began weeks ago, when I suddenly couldn't browse the Internet at home despite being fully connected to the network. The network was a private, password-protected wireless network set up through a Netgear router.
I have spent hours troubleshooting and have tried multiple fixes including resetting PRAM, deleting and re-creating Airport, deleting and re-creating networks, changing IP and DNS, etc. to no avail. My roommate's PC works perfectly fine on the same wireless network.
This seems to be an issue with networks I use long-term. I can connect fine to networks at Starbucks, etc. for short-term use. Also, while trying to troubleshoot my connection issues on my home network over the last few weeks, I'd been using my apartment complex's public wireless connection (no password) with no issues. All of a sudden, I am having the same exact issue with that network. It's like something just snaps and maybe gets configured wrong after a few weeks or months of use.
I am desperate to find a fix, since now I can't use the internet AT ALL while at home and need it for work.
Thank you in advance for your help!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
Wireless network with 2 computers and an HP J4680 printer with Connection problem
I have two computers. Each of them has been connected to the HP Officejet J4680. I can "ping" the printer from both computers and get a response. I can print documents to the printer from one computer (A), but not the other (B). Each computer is using the same IP address and Port 192.168.1.3 HP_192.168.1.3_CN95L981CS052X for the wireless printer.
Today I learned that if both computers are turned on, I can print from computer B, using the printer's profile stored in computer A.
I have reinstalled the printer driver numerous times. I have reconnect the printer to the network. The troubleshooter software provided by HP was not able to determine why computer B will not recognize the wireless printer.
I do not want to always have both computers on to print to the wireless printer.
This question was solved.
View Solution.Sounds like this could be an issue with the software. To start I want to be sure that we remove the software fully and correcty before we continue. Follow the instructions below and see what happens after.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
find and install the FULL FEATURE SOFTWARE if it is available :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3692888
Install that and let me know the result!
Have a great day!
-Spencer
PS have a wonderful day and a fantastic weekend! -
I can't update, purchase, or anything… even on the strong internet signal! Is something down??
A simple search of the Internet would have revealed that Apple is reporting issues with iTunes currently.
-
Problems connecting to BTFON wireless network
Hi all
I have been connecting to the internet through BT FON for almost a month now but without warning I lost access to the network. Whenever I attempt to connect, it says - Limited or no connectivity and I've noticed that when I attempt to repair the connection it hangs as it fails to renew my IP address. The error message is: failed to renew your IP address. For some reason I've lost connection with the server.
Is the problem with my laptop? Is there a way to fix this?
ThanksThanks for your response Riad but my issue is still my issue is still unresolved. I've been trying different locations for the past month without any luck. Everytime I try to connect it returns as "Limited or No Connectivity". I am able to connect to other wireless networks with ease. I am not whether its a settings issue or not.
This bothers me because I still have quite a bit of unused credit in my Fon account. I was browsing happily one minute and the next it just disconnected and hasn't been up since. I checked the map for coverage and it still shows that on my street there are 4 or 5 people with hubs.
Confused! -
Problem staying logged into a wifi network
I am having problem staying connected to a wifi network. I logged on a wifi network, enter password, and it says it as connected to the wifi network. Then it kicks me off the wifi network that I am currently logged into. Any advice or comments?
I am having problem staying connected to a wifi network. I logged on a wifi network, enter password, and it says it as connected to the wifi network. Then it kicks me off the wifi network that I am currently logged into. Any advice or comments?
-
HP 3520 All-in-One Printer Falls Out of Wireless Network Periodicially
We have an ongoing problem with our HP 3520 All-in-One Printer. We set it up for wireless printing and it works....for a while. Periodically, we find that it falls off the wireless network and will not print except when plugged into the USB cable. The problem is that my husband has an Ipad Air as his main device which he cannot plug into the printer and needs to have wireless working...and the main reason we bought this printer was to have wireless capability. We *think* that it may be falling off the network when we have a brief power outage or Internet outage, which happens occassionally for a short time. Also, on my laptop, although the wireless set-up to this printer has worked in the past, now I see that I can either connect my laptop to the Internet network OR the printer, but not both at the same time. How strange is that?
I have printed out the Wireless Network Test Results AND the HP Network Configuration Page, in case that information can be useful as we attempt to troubleshoot this problem.
Note that the printer is no longer under warranty.
I have reviewed numerous HP product support pages and feel as if I am running in circles. The help information is confusing to us and we have spent so many hours trying to troubleshoot this issue that my husband has completely given up on that printer and I am doing my best to try to save it since it is only about a year old.
We appreciate any help you can give us to remedy this ongoing problem.
PSCoHello there PSCo, Welcome to the Forums! I hope you enjoy your experience
I saw your post about your Deskjet 3520 dropping the network connection. It very well could happen if the power goes out or Internet disconnects. I have found a troubleshooting guide that is geared to help repair the wireless connection disconnecting. It will go further into detail about the causes and things to do to help.
I hope the steps work for you!
Printer Does Not Maintain Wireless Connection
Thanks for posting, enjoy the rest of your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
can some one help me with the question ..
no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...
-
After updating to WIndows 10, I can print but not scan with my HP 2210 all in one
I updated to Windows 10, and since then I'm able to print but not scan with my HP 2210 All-in-one printer. I've tried downloading the software updates but nothing seems to work. Any suggestions
Hi , and I see you are both having trouble scanning after upgrading to Windows 10, and I may be able to help. Most products do have updated software available on HP's support website for Windows 10. I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too. HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive. Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type Paint.Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks, -
My iMac is not staying connected to the wireless internet. My provider tells me it's a computer issue and not their problems. Any suggestions?
Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
Can't connect to wireless network with "conflicting" essid
Hello,
My wireless card works perfectly (actually I am using ndiswrapper, but anyway) on Arch and I can connect to my home wireless network. I use iwconfig to connect.
In my office we have a wireless network. It's essid is "default" and it uses WEP. I can connect to it using Windows, but not using Arch. Im running the following commands:
iwconfig wlan0 essid "default" key XXXXXXXXXX
dhcpcd wlan0
and it doesn't connect ("waiting for carrier..." and nothing happens)
I guess the problem is that there is another network with the same essid - "default". I've tried to manually associate my card with my office network AP using iwconfig wlan0 ap XX:XX:XX:XX:XX, but it didn't work either.
What should I do?What kind of Wireless card do you have and what does it say when you do a lspci? So for me, I know I have a Broadcom and the way I found it was to do:
lspci | grep BCM4312 (or whatever wireless make/model you have)
or
lspci | grep "Network Controller"
The second option should also get it for you. From there, you can check out this list to see if that might help you with drivers (but then again, you might have known this already so...).
Hope this helps.
Last edited by ruffedgz (2009-11-23 21:03:42)
Maybe you are looking for
-
Spry Accordion, UseFIxedHeights is not sticking
Hello ds::Spry, I have been working with accordion widget, i changed the css styles to it matches the layout. Its using a dataset with it. But it seems since i started using the dataset + region observer, the fixedheight isnt working anymore. The odd
-
ITunes Store is unable to process purchases at the time, Payment process
Hi, I am trying to update my iPod Touch to firmware 2.0 and I would be more than willing to pay the 8 euros but I am not allowed by iTunes which everytime I try to purchase gives me this warning: "The iTunes Store is unable to process purchases at th
-
After 10 years of Mac OS X server DNS GUI wrapper still breaking configs
WHY? Against my better judgment I used the Server Admin's DNS tool to add a zone. Next thing I know it's going and added random data from the new zone to most if not all my zone records. It's changed the SOA for all my zones to some random concatenat
-
How to audit ip addresses of iPrint printers?
We need to audit the ip addresses of all our iPrint printers. I though that this would be straight forward using dsreport; but not so. The ip address shows up in iManager but there seems to be no way of pulling the information off. Any help and tips
-
Hi-I am trying to email photos from iPhoto and I keep getting a flag that says "the server does not recognize the username/password combination. Can you help me to reset it?