Problem STMS: "Copying Import Queue SID "
Hello
I have a quetion, yesterday we changed the name server of production, now when I want to make the tranports I got this message
Copying Import Queue <SID>, I had checked the configuration of stms, RFCs and I did the test and these are ok
In the alert viewer I found this mesage
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: connection to partner 'prod.line-online.com:1823'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
I don`t know Where can I check?
thanks a lot
Hi Danny,
Can u just clear us is the is the problem with transport control program is resolved.
in the above reply u r telling the requests don't load in the queue.
Is that means spool request or transport request. please clear the point.
Also as ur telling in SM21: "Spool is full" ; and another message says: "Run-time error "SPOOL_INTERNAL_ERROR" occurred"
are occurring. Can u just go to those work processes, and analyze the trace file errors(which will be listed in red colour).
if ur having any issues, paste the trace file error log here.
let us know if u have any issues,
Regards,
Ravi
Similar Messages
-
hi all,
i had restarted my servers in the morning since then i can read import queue of qty
from dev but can when i try to read import queue from prd to dev it shows status
"copying import queue" that run forever. at os level i can see the request in the import
buffer.i even activated and distributed the configuration but of no help.please help me out.
sanjeevhi joe,
i am realy very-very thankful to you as it worked like magic .
As your reccomendation i found that there were two tp.exe
processes were running and there was a lock file SLOG0914.PRD.LOC
exist in usr/sap/trans/tmp folder. i rename this file to SLOG0914.PRD.LOC.old.
this killed one tp.exe process and i am able to see the import queue of prd.
thanks once again
sanjeev -
Short text problem in import queue (STMS)
hello,
I have a problem with the short text in the import queue on STMS,.
The short text no longer appears on new request, but still appear on import history.
would anyone help me with this matter?
Anthony P.This topic already discussed many times. If you search on SDN you will get the answer.
Unde stms import queue there is a icon personal setting --> under other setting make sure the read missing texts from data file is ticked. -
Hi All,
I need to import an externall request in to my environment.
The problem occur when I following steps:
1) Logon in Dev environment
2) Trx. STMS
3) Import Overview
4) Select Dev Queue
5) Extras->Other Requests->Add
The Add option Menu is disable.
How can I able the Add option menu, please ?
In another hand(Quality and Production) the Add option Menu is able.
Thanks
Regards
Marcos MagalhãesHi All,
The problem was solved with the following way:
The requests in DEV queue without target client(with red collor) were removed.
After that I updated the dev queue and menu worked fine.
Thanks
everybody!!!
Edited by: Marcos Magalhães on Jan 27, 2010 5:31 PM -
STMS Import queue Fails - FTP_FAILED
Hi All
Stms import queue fails with the following error message
System BWP Command TMS_MGR_TRANSMIT_TR_QUEUE
Client 001 Service Transport Service
User SAPBASIS Start Online
Date 14.05.2009 Function TMS_TP_ADD2BUFFER
Time 11:48:34 Message FTP_FAILED
Source file could not be opened
long text
========
An error occurred when opening the source file for reading.
File name: R901010.BWE
Directory: $TR_DATA
Error code: 16
Definition of the error codes:
03 RFC system failure
04 RFC communication failure
11 invalid EPS subdirectory
12 sapgparam failed
13 build directory failed
14 no authorization
15 build path failed
16 open failed
17 read directory failed
18 read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission
==========
suggesstions please
Edited by: Harendranath Medarametla on May 14, 2009 11:59 AMHi Saurabh,
I am able to FTP files manually between servers.
START TRANSMIT BUFFER ENTR BWP g 20090511092623 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090511092638 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152143 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152159 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152251 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152307 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152321 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152338 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171040 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171056 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171405 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171421 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171429 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171446 MEDARAMETLAH smuc021
START CMDIMPORT BWP L 20090512172121 MEDARAMETLAH smuc021 20090512172120681
STOP CMDIMPORT BWP L 20090512172123 MEDARAMETLAH smuc021 20090512172120681
START MAIN IMPORT BWP I 20090512172124 MEDARAMETLAH smuc021 20090512172123291
STOP MAIN IMPORT BWP I 20090512172139 MEDARAMETLAH smuc021 20090512172123291
START CMDIMPORT BWP L 20090512172139 MEDARAMETLAH smuc021 20090512172139056
STOP CMDIMPORT BWP L 20090512172343 MEDARAMETLAH smuc021 20090512172139056
START CREATE VERSIONS BEFO BWP w 20090512173112 MEDARAMETLAH smuc021
START tp_getprots BWP W 20090512173112 MEDARAMETLAH smuc021
STOP tp_getprots BWP W 20090512173322 MEDARAMETLAH smuc021
STOP CREATE VERSIONS BEFO BWP w 20090512173322 MEDARAMETLAH smuc021
START DD IMPORT BWP H 20090512173623 MEDARAMETLAH smuc021 20090512173622926
STOP DD IMPORT BWP H 20090512173855 MEDARAMETLAH smuc021 20090512173622926
START DD ACTIVATION BWP A 20090512173905 MEDARAMETLAH smuc021
START tp_getprots BWP J 20090512173905 MEDARAMETLAH smuc021
STOP tp_getprots BWP J 20090512174100 MEDARAMETLAH smuc021
STOP DD ACTIVATION BWP A 20090512174100 MEDARAMETLAH smuc021
START imp all BWP 20090512174101 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_START triggered successfully
START CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
STOP CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
START DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START DISTRIBUTION OF DD-O BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP DISTRIBUTION OF DD-O BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
INFO TBATG CONVERSION OF BWP N not needed MEDARAMETLAH smuc021 20090512174100971
START MOVE NAMETABS BWP 6 20090512174118 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP P 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP P 20090512174223 MEDARAMETLAH smuc021 20090512174100971
STOP MOVE NAMETABS BWP 6 20090512174223 MEDARAMETLAH smuc021 20090512174100971
START MAIN IMPORT BWP I 20090512174224 MEDARAMETLAH smuc021 20090512174100971
STOP MAIN IMPORT BWP I 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START TBATG CREATION OF EN BWP n 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP Y 20090512204043 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP Y 20090512204053 MEDARAMETLAH smuc021 20090512174100971
STOP TBATG CREATION OF EN BWP n 20090512204053 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all BWP 0004 20090512204055 MEDARAMETLAH smuc021 20090512174100971
START EXECUTION OF REPORTS BWP R 20090512204200 MEDARAMETLAH smuc021
START tp_getprots BWP R 20090512204200 MEDARAMETLAH smuc021
STOP tp_getprots BWP R 20090512205837 MEDARAMETLAH smuc021
STOP EXECUTION OF REPORTS BWP R 20090512205837 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095342 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095359 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095701 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095718 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095723 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095740 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100151 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100208 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100213 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100231 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100238 TMSADM STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513103804 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513103833 MEDARAMETLAH START TRANSMIT BUFFER ENTR BWP g 20090513115655 MEYERA smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513115713 MEYERA smuc021
INFO: Buffer saved as
smuc021\sapmnt\trans\buffer\BWPSAV.
======================
also please see the error when i try to connect using TP command in os
This is tp version 372.04.40 (release 700, unicode enabled)
Connection to Database of BWP was successful.
This is R3trans.exe version 6.14 (release 700 - 16.10.08 - 16:26:00).
unicode enabled version
2EETW152 Cannot open file "
SMUC013\sapmnt\trans\tmp\C090514.BWP".
R3trans.exe finished (0012).
SMUC013\sapmnt\trans\log\C090514.BWP for transport: ALL: Permission denied
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (1)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (1), I'm waiting 1
sec (20090514174859). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (2)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (2), I'm waiting 3
sec (20090514174900). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (3)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (3), I'm waiting 1
sec (20090514174903). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (4)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (4), I'm waiting 5
sec (20090514174904). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (5)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (5), I'm waiting 3
sec (20090514174909). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (6)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (6), I'm waiting 3
sec (20090514174912). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (7)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (7), I'm waiting 2
sec (20090514174915). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (8)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (8), I'm waiting 5
sec (20090514174917). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (9)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (9), I'm waiting 5
sec (20090514174922). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (10)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (10), I'm waiting
4 sec (20090514174927). My name: pid 4340 on smuc021 (bwpadm)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC: Permission denied
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG0920.BWP for more details
I have 4 system lanscape but other systems dont have this problem, even i have not maintained any permissions.
regards
hari -
HI all,
Think some body deleted TR request (or something happend in the import queue) from the import queue, from that day onwards there was no transports are going on from development to quality systems. is there any chance to rebuild import queues, it was a problem in STMS imports.
pls help me.
cheers,Did you refresh the list with refresh button?
If yes, check release log of that particular transport.
Hope it helps.
Regards -
STMS - Import Queue not updating
Hi,
I'm hoping for a little guidance to track down a problem.
We have a simple 3 system configuration (DEV > QAS > PROD) and we're currently about 2 months away from going live with the Production box.
However, the STMS import queue for Production hasn't updated since 13/09. It's status is "Data obsolete or missing".
Being a bit of a novice, I'm not sure where to start to try track down why, after 12 months, this queue has stopped updating.
Any help would be appreciated.
ThanksIf the queue is not been updated the most likely scenario is that it can't read the trasnport directory or the STMS config is not maintained properly... what happen when you try to refresh the queue?... any errors?, Check the system status in the domain controller if theres an issue try to redistribute.
Regards
Juan -
STMS: how to hide the Import All Requests button in the import queue view?
Hi All,
I'd like to know how to hide the "Import all requests" button in the import queue view.
Thanks a lot for your answers.
G.Hi,
about hiding i have a doubt but u can inactivate by following procedure,
As referred in a thread:
On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
or
Refer to OSS NOTE 194000.
Thanks & regards. -
LIghtrroom 1.1 problem 1 & 2 importing-copying from CF cards (raw)
Hi.
With Lightroom 1.0 I didn't had this problem, but since I updated to 1.1 and Im importing from CF cards (raw files) and this is very darn often, Lightroom comes up with problems either 1 or two and its not able to copy 1, 2, or 3 files. But if I try to import again those missing files it does import them! And this is very annoying because I have to go one by one to see which one (s) it missed!
And much worst sometimes it doesn't read a big chunk of files. It shows that it found lets say 100 raw files and shows them in the import text box, when the finder (Mac OSX 10.4.10), camera, and other software its showing me the real 130 files.
Also, sometimes I select some of the images I want to import in that dialog box, and it imports some random ones. This has happend a few times. And when I try it again and it selects the same random ones even if a choose a completely different set of images.
Whats going on? I didn't install any new software/hardware to my MacBookPro computer but the Lightroom Update!
Please help Lightroom is killing me!I've seen Lightroom (1.0) fail to import all images from a card reader, that otherwise works fine (I've never had a single problem just copying the entire DCIM folder from the card to my hard drive using the Finder). This was mitigated somewhat by Lightroom's duplicate detection; I'd say "import my memory card" and it would get 90% of it but miss a couple (and no easy way to select the ones it missed). But then I just say "import the whole thing again" and it would do only the ones it had missed the first time. Repeat until it got no errors, which sometimes took 3 or 4 passes.
The whole thing was not very confidence-inspiring though, so now I always copy the files from the card to where I want them, then tell Lightroom to import them at their current location, and I haven't had any problems doing that. -
Hi Friends,
In production system, went to STMS for importing request.
First used option queue->adjust. Next used import request, then request symbol turns to truck(import is running), after some time i refreshed screen, it turns to yellow.Yellow means request ready for import again. why system given that status "request ready for import again". I checked log for that request "ended with return code 8". What is procedure to rectify that?
thanks,
RPHi
release the relevant repair and repeat the import. Is it mean again we need to release from dev system and proceed stms for reimport, right?
Once the request is released you can import again into the target system, but you cannot release it again from Dev system.So you need to check the log, Collected the required objects in the transport order and transport it. After transporting it you can import the previous failed request again so that it will import all the other objects which are collected in the previous request.
Regards
M.A -
Hi All,
I want to know if there is a way (program) that i can use to refresh the import queue in STMS automatically even when the import queue screen is not open. I am experiencing some intresting scenario and i am not sure if its normal. please let me know:
- I have recently added Sandbox system in the already existed TMS landscape. Domain links are used since Sandbox and DEV are in different network. When i release the transport in DEV its supposed to go to QAS import queue and also to Sandbox import queue in parallel. I can see them in QAS queue automatically without refreshing it, however it does not go to the Sandbox queue even after I refresh the import queue of Sanbox system (from Sandbox System). The only way It goes to the Sandbox import queue in Sandbox Queue is when I go the the Import Queue of Sandbox system in DEV system and Refresh it there. Is there normal? After I refresh import queue for Sandbox in DEV , i go to the Sandbox system and click on sandbox queue then refresh it there and it comes right through. I understand the concept of adujst the transport files by clicking the green arrow since they dont share same Central Trans Dir and i am also aware of the SAP report to perform this automatically.
-My question is, Why do is it required to refresh the import queue for Sandbox system "in DEV system" ? and is there any Report/Program that i can schedule in the Background in DEV that refreshes all import queues for all systems there even when the import screen is not open?
please suggest. thanks.I will put your question in more clear way!!
You are not able to view the transport in SANDBOX STMS(Auto refersh is active) untill you refresh from DEV STMS ...Is this ?? I dont think it should happen you are accesing the same screen from DEV or SANDBOX.
Just try what i have mentioned above
1) In sandbox select personal setting and do as per firt post
2) Release any request in DEV (Dont open STMS in DEV system )
3) Check if transport is available in SANDBOX STMS(Login to SANDBOX only)
Paste here the observations....
Regards, -
Adding transports to import queue after System Refresh
Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
RaviThanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi -
Cannot delete service pack in import queue
Hi all,
we restored our system and I want to apply some patches now. In SPAM I get an error that the queue is not empty.
I checked STMS and found a support package stuck in the import queue which we tried to upload before we restored the system.
I tried to delete it but the delete job get stuck while the taskbar shows "tp user check ok".
Can anyone give me a hint how I can free the import queue again?
Thanks in advance
Cornelius
Message was edited by:
Cornelius GoldhahnI solved the problem.
I just give the answer in case anyone experiences a similar problem.
The thing was, that the file did not exist anymore but the queue was still blocked because the buffer was not cleared after the system was restored.
All I needed to do was to delete the file "<sid>" in the folder /usr/sap/trans/buffer and do a refresh in transaction STMS.
Hope this will help someone in the future
Cheers
Cornelius -
Need TP command for Add Transport Request to import Queue all at a time
Hi SAP gurus,
Can you tell the o/s or TP command to Add Transport Request to import Queue all at a time which are available in co files directory ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babuHi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1 column2 column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff -
Dear experts,
We have DEV,QAS & PRD(ON AIX and oracle 9.2) and solman (win2k3 & oracle 10.20 single system TMS).Few days ago we had configured Change request management successfully.As per requirement we had made Domain link between SOLMAN and Domain controller (QAS).Everything was working fine till two days ago when we observed that R/3 systems were not able to read the import queue of SOLMAN.Even solman was not reading its own import queue and giving error TP PROGRAM COULD NOT BE STARTED.checked sharing,permissions,hosts file entry ,service file entry ,rfcs(CALLTP_WindowsNT) but no benefit.But while checking dev_rfc we got the log
* Trace file opened at 20100518 100121 India Standard Time, SAP-REL 700,0,221 RFC-VER U 3 1090073 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: )
Called function module: RFC_TP_INTERFACE_VERSION
User: TMSADM (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 60566250, {243662DF-DDF4-F173-B81D-001A64656336})
SERVER> RFC Server Session (handle: 1, 95414842, {4BF07341-C79C-00D0-E100-8000AC10013A})
SERVER> Caller host:
SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
SERVER> Called function module: TMS_CI_START_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3339
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456*
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
seems to us that TP is not able to resolve host nameas entry is blank .Check RZ10 and tp profile where host name is mentioned.how to resolve this issue.please help me out.
Regards
RahulHi,
Have you tried restarting the SAP system (SOLMAN system) ?
Please check the HOST file on each server whether it also contains "host" entries for other servers.
Also check the below note if applicable in your problem.
[Note 616621 - RFC listener does not start after importing SR3|https://service.sap.com/sap/support/notes/616621]
Regards.
Rajesh Narkhede
Maybe you are looking for
-
How to access network drive in mac app ?
Hi All, How to get the access to the file system of a networkdrive in mac app ? Let the shared path is \\192.168.2.57\JPEG . What are the apis use to connect to a networkdrive ? I am using Lion OS and the server is a Windows Server running with smb s
-
How to list Forms (*.fmb) in File -- Open dialog box by default?
I am Using Forms 6i. Whenever in Forms Builder, I click File--> Open, it lists 'All Files (*.*)'. How can I configure form Builder so that it lists 'Forms (*.fmb)' by default whenever I click File--> Open. Pl. guide. M. Tariq
-
Trying to get a Wasp 800 to work with an iPad 2
Good Morning All, Recently, my department has purchased a few iPad 2's, and we'd like to use a bluetooth scanner. One of our guys purchased a Wasp 800 thinking it would work because it's bluetooth. I tried it and called customer support twice this
-
my mac pro mid of 2010 restarts autumaticaly and i see through discustion that mac repair this problem for free when i went for local apple kuwait they want to charge me 800 us dollars what shall i do?
-
Preventing iPhoto Library being a bundle
A question to the advanced power users: Does anybody know how to prevent the iPhoto Library turning from a folder into a bundle each time after iPhoto has been used? In other words: I want to keep the iPhoto Library as a plain folder. As of now, afte