Problem storing two identical qualifications with different proficiencies

Hi Experts,
I am trying to store qualifications in infotype 0024 (although the actual data ends up in HRP1001). My issue is that if an employee holds two identical qualifications (ex. CPR) with two proficiencies (ex. basic and advanced), the system will not let me store both of them. It either forces the earlier one's date to be delimited, thus making it no longer valid, or if the date range for the qualifications are the same, deletes the earlier one entirely and just saves the new one.
I know that this is because the key is duplicated in HRP1001. BUT, HRP1001 also contains a SEQNR field that should handle this, but I cannot get it to work? Is there a way to activate HRP1001-SEQNR?
I have tried playing with the time constraints. I assume that '3' is the one to use, but I still can't get all of the qualifications to save.
Any ideas??
Thanks in advance!
Shane LaBonte

Hi Roman,
I want to use the Qualifications infotype because we need the data in e-recruitment as well.
I used CPR as a broad example. I am in the K-12 Education sector. A real-life example would be an employee that holds the qualification: Intermediate & Senior. The proficiency of this qualification could be: Music. Another could be: Law.
There is a college that all teachers must register through to get their qualifications recognized. We are at their mercy in terms of how a qualification is defined. And because of the sheer number of qualifications that could exist (we're talking upwards of 1000), we DO NOT want to get into any sort of mappings between a qualification coming from the college converted into a different qualification recorded at our end.
Any ideas? I know this problem is quite unique.
Thanks
Shane

Similar Messages

Can I have two identical PCs with clones of the same hard drive?

This all started when I had a problem with my first pc, a gateway laptop, would not wake up from sleep due to, supposedly, a driver problem. I didn't want to send it off for my free, under-warrantee, repair and be without a computer for however long that
would take. So I bought another one and took it to a local dealer to clone the hard drive of the first one to put on the new one.
This created a number of odd problems which eventually I figured out had something to do, it seemed, with Microsoft not allowing two identical machines to exist like that. I only plan to use one, the other one being exclusively for backup or in case something
happened to the first. But I think the problems occurred when I tried to switch back and forth, to do some texting.
Is there a way I can accomplish this?
Thanks.

Until Windows 7, it was possible to use two identical PCs with same clone. Provided, both the PCs must be legally licensed to use the Windows operating system (version as well as edition) and of same OEM, model and spec. This is possible because, the product
keys are common for all the PCs of same OEM build (if preinstalled, and the installed product key is different from the one mentioned in COA). This made OEM builders to distribute to more PCs than the license agreement, which is impossible for Microsoft to
find out. To solve this issue, Microsoft changed the licensing structure from Windows 8 - embedding the product key in BIOS. So, here, only the installation is provided and the product keys are not common for all the PCs even if they are of the same OEM build.
Therefore, cloning fails here. And naturally, as Team Zigzag and EC Ltd say, same product key can't be used for more than one PC.
As to restore the PC in case of an emergency, you can perform a backup of the existing installed software and user files, which can be restored later (File History in Windows 8). The following links may be helpful:
http://windows.microsoft.com/en-us/windows-8/what-happened-to-backup-restore
http://blogs.technet.com/b/keithmayer/archive/2013/09/17/backup-amp-recovery-of-windows-8-windows8-itpro-tipoftheday.aspx#.UkC-hmLrbIU
Balaji Kundalam

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

HT1491 I have two itunes accounts with different Apple ID's. How can I merge them into one?

I ahve two itunes accounts with different Apple ID's. How can I merge them into one account?

Apple has no provisions for this. You cannot merge multiple Apple ID's into one ID. Content is always tied to the Apple ID that was used to purchase it.

Merge of two same items with different Qty in po

Hi Experts,
Is it possible to merge two Same items with different Quantity into 1.
For Eg:- 2 similar items with qty 2 & 3 must show 5 qty appearing once.Is it possible through Transnotification what should be the query.
Mona

Hi Mona,
If you want to display a Purchase Order on screen summarized by item, set the "Summary Type" to "By Item" (by default it is "No Summary"). The PO lines will then be summarized by item with total quantity for each item.
If you want to display it on the printout then you need to modify the PLD. It is quite easy actually. You can use the Repetitive Area Footer to display the summary of each item and set all fields in the Repetitive Area to be not visible and set the height to minimum height.
Cheers,
Marini

Performance between two partitionned tables with different structure

Hi,
I would like if there is a difference between two partitionned tables with different structure in term of performance (access, query, insertions, updates ).
I explain myself in detail :
I have a table that stores one value every 10 minutes in a day (so we have 144 values (24*6) in the whole day), with the corresponding id.
Here is the structure :
| Table T1 |
+ id PK |
+ date PK |
+ sample1 |
+ sample2 |
+ ... |
+ sample144 |
The table is partionned on the column date, with a partionned every months. The primary key is based on the columns (id, date).
There is an additionnal index on the column (id) (is it useful ?).
I would like to know if it is better to have a table with just (id, date, value) , so for one row in the first table we'll have 144 rows in the future? table. The partition will already be on the columns (id, date) with the index associated.
What are the gains or loss in performance with this new structure ( access, DMLs , storage ) ?
I discuss with the Java developers and they say it is simpler to manage in their code.
Oracle version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Thanks & Regards
From France
Oliver
Edited by: 998239 on 5 avr. 2013 01:59

I mean storage in tablespaces and datafiles on disk.
Can you justify please and give me concrete arguments why the two structures are equivalent ( except inserting data in T(id, date,value))
because i have to make a report.i didnt say any thing like
two structures are equivalent ( except inserting data in T(id, date,value)i said
About structure : TABLE1(id, date, value) is better than TABLE1(id, date, sample1, .... sample144)because
1) oracle has restriction for numbers of column. Ok you can have 144 columns now but for future if you must have more than 1000 columns , what will you do?
2) Restrictions on Table Compression (Table compression is not supported for tables with more than 255 columns.)
3) store same type values on diffrent columns is bad practise
http://docs.oracle.com/cd/B28359_01/server.111/b28318/schema.htm#i4383
i remember i seen Toms article about this but now i cant find it sorry ((( if i found i will post here

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

How can i compare two excel files with different no. of records.

Hi
I am on to a small project that involves us to compare two excel files. i am able to do it but am struck up at a point. When i compare 2 different .csv files with different no. of lines i am only able to compare upto a point till when the number of lines is same in both the files.
Eg. if source file has 8 lines and target file has 12 lines. The difference is displayed only till 8 lines and the remaining 4 lines in source lines are not shown.
Can you help me in displaying those extra 4 lines in source file. I am attaching my code snippet below..
while (((strLine = br.readLine()) != null) && ((strLine1 = br1.readLine())) != null)
                 String delims = "[;,\t,,,|]";
                String[] tokens = strLine.split(delims);
                String[] tokens1 = strLine1.split(delims);
               if (tokens.length > tokens1.length)
                for (int i = 0; i < tokens.length; i++) {
                    try {
                        if (!tokens.equals(tokens1[i])) {
System.out.println(tokens[i] + "<----->" + tokens1[i]);
out.write(sno + " \t" + lineNo1 + " \t\t" + tokens[i] + "\t\t\t\t" + tokens1[i]);
out.println();
sno++;
} catch (Exception exception)
out.write(sno + " \t" + lineNo1 + " \t\t" + tokens[i] + "\t\t\t\t" + "");
out.println();
Thanks & Regards

A CSV file is not an Excel file.
But apart from that your logic makes no sense.
If the 2 files are of different sizes the files are different by definition, so further comparison isn't needed, you're done.
If you want to compare individual records, you need to compare all records from one file with all records from the other, unless the order of records is important in which case your current system might work.
That system however is overly complicated for comparing CSV files.
As you assume a single record per line, and if one can assume those records to have identical layout (so no leading or trailing whitespace in or between columns in one file that's not in the other) comparing records is simply a matter of comparing the entire lines.

Two Fact tables with Different set of Dimension Tables

Here is my scenario:
I got two fact tables: X and Y (actually, they are the same tables, but with different level of data)
and four dimension tables: A, B, C, D
X joins relationship to all dimensions (A, B, C, D).
Y joins relationship to only A, B, C, but no D.
When I select dimension A, B and C together with fact tables X and Y in BI Answer, result is displayed and compared.
However, if I select dimension D together with fact tables X and Y, only data from fact table X is displayed. There is no result displayed for fact table Y. I know that this is because fact table Y does not join to dimension D.
If the above relationship unchanged, how can I display both X and Y's result in BI Answer when dimension D is selected?

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

Unable to use two af:tables with differing coloring (skins)?

Im trying to configure the Siebel Self-Services application and customize the skinning. I have some problems though, because i need to show two af:tables on the same page, but with different coloring. One with black background and white text (both header and body) and one with white background and black text. I have tried to use styleClass:es, but the css parameters set for the af table are overriding the ones set in the stylesheets.
Anyone having an idea how to overcome this?
Thanks
/Jon-Erik

Hi,
if the styleClass name is table1 then the skin selector would be something like
.table1 af|table
or .afTable.af|table
I don't see how this can be overriden. If you assumption is that the style class reference must be to a CSS definition on the page then this indeed does not work. The styleClass name is kind of a named identifier for the component to skin and is used to further qualify the component to skin
Frank

Why connect two dhcp servers with different IP addresses?

so for an assignment at college we had to configure a router connected to two switches which both had a server connected to them.
the computers were connected via dhcp to either server however each side had a different IP. we have now been asked to justify as to why two servers were used with different IP which I cannot quite produce a business orientated answer.
I can understand connecting two dchp servers on same IP to increase fault tolerance but I do not understand using two separate IP addresses.

Hi,
Does “using two separate IP addresses“ mean 2 subnets which are connected by router？
If you have separately configured 2 DHCP servers on the 2 subnets, and want 1 of the 2 DHCP servers to provide fault tolerance for the other. You need to use an RFC 1542–compliant router, or DHCP relay agent, in order to forward DHCP broadcast traffic.
If there is any misunderstanding about your question, please correct.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Identical pages with different names on website

Hi, I've recently put up a new website which completely
replaces the old one. I'm about to delete all the old pages off the
server, but I notice they're still coming up on google. Is it bad
practise to replace the old pages with my new ones, and leave two
copies of the page on the server but with different names? Eg, the
new page about restaurants and entertainment is called
"restaurants_entertainment.html" but the old page is just called
"restaurants.html". So I was thinking I could save my new page as
'restaurants.html' and put it onto the server as well, so that when
users click on the search results they get taken to the new
restaurant page and not the old one. I'm thinking this is not a
good thing to do? just wanting confirmation from the
experts...

It's best, whenever possible, to give your new pages the same
filename as
your old pages -- so that basically, you're just replacing
the content on
each page.
If that's not possible, you need to 301 redirect from the old
pages to the
new pages, e.g., redirect from restaurants.html to
restaurants_entertainment.html, so that when people click on
the "old page"
in Google, or from their bookmarks, or in a link on another
site, they will
end up at your new page.
Sonjay
On 11/9/08 7:44 PM, "just_carly" wrote:
> Hi, I've recently put up a new website which completely
replaces the old one.
> I'm about to delete all the old pages off the server,
but I notice they're
> still coming up on google. Is it bad practise to replace
the old pages with
> my
> new ones, and leave two copies of the page on the server
but with different
> names? Eg, the new page about restaurants and
entertainment is called
> "restaurants_entertainment.html" but the old page is
just called
> "restaurants.html". So I was thinking I could save my
new page as
> 'restaurants.html' and put it onto the server as well,
so that when users
> click
> on the search results they get taken to the new
restaurant page and not the
> old
> one. I'm thinking this is not a good thing to do? just
wanting confirmation
> from the experts...
>

Two Related APPs with different session?

Hi all!
I have two apps (in a different workspace) linked by a tab. And whenever i switch between them, apex assigns a new session id.
The url given by me to the tab includes the &SESSION.
Is there any way to maintain the session??
Thanks!!!

No, see cookies and sessions
Scott

Two internal tables with different structures

Hi Experts,
I Have two internal tables.
Table 1 structure:
Name
Age
Table 2 structure :
Name
age
branch
Now the table 1 has some 5 data's and table 2 is empty.
First i want to move that 5 data's from table 1 to table 2.
Then the branch field is same for all records. its stored in a separate field called 'Branch'.
finallay i need to move that branch to internal table 2 for all records.
So the Table 2 should has five records and each record should have the branch.Its like,
Name Age Branch
name1 10 ECE
name2 10 ECE
I didnt use with header line for both tables. In function module i declared as table parameter.
Please give me a logic.
Helps will be appreciated.

Since the structure of yur both internal table is different so you can't use ITAB1[] = ITAB2[] statements.
In this case you have to loop on first table then move data into second table and appned data into second table.
Declare work area for both table with like line of statement as follows
data: wa_itab1 like line of itab1,
wa_itab2 like line of itab2.
Loop at ita1 into wa_itab1.
wa_itab2-name = wa_itab1-name.
wa_itab2-age = wa_itab1-age.
wa_itab2-branch = 'ECE'.
append wa_itab to itab2.
clear wa_itab1, wa_itab2.
endloop.
Hope this will solve your problem.

Need to setup Premiere CS6 sequence for two file types with different field orders

I have a client who has shot video for me using two cameras, one camera was set to progressive, and the other to interlaced upper field first. I need to use both file types in the edit and have been struggling to set up the sequence to get the best look for the end product, a DVD. I have several videos to do for her that were all shot in the same way, so I need a solution!
I would appreciate help figuring out how to set up this work flow from beginning to end.
Should I convert one of the files from the beginning so they match field orders before going into a sequence? Or do I just need to do some adjusting of the files once they are in the sequence? Is it just as simple as changing the transcode settings to favor the upper field first? I'm definitely having issues once the video is transcoded in Encore and you can see a lot of jagged edges and lines especially during movement. My client isn't happy and I've tried several workarounds, but to no avail.
Here are the two file types I have:
File extension: .MOV
H.264, 1920x1080, Linear PCM, 16 bit little-endian signed integer, 48000 Hz, stereo
FPS 29.97
No Fields: Progressive Scan
File extension: .MTS (my Mac finder can't read these files, but they are read in Premiere)
Image Size: 1920 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - 6 channels
Pixel Aspect Ratio: 1.0
Upper Field First
I am using Adobe Premiere CS 6.0.2
Encore 6.0.1
Media Encoder 6.0.2.81
I am running it on an iMac 27-inch, Mid 2011
with Mac OS X Lion 10.7.5
Processor 3.4 GHz Intel Core i7
Graphics AMD Radeon HD 6970M 1024 MB
I've just been setting the sequence to match the .MOV files since they look much better than the .MTS files. I've done the opposite as well, setting the sequence to match the .MTS files and it doesn't seem to help. I've also changed the field order of the files once they are in the sequence by changing the field options and have tried converting the .MTS files in the Media Encoder, but nothing I've done has worked.
Any help would be so appreciated! The client I have is a photographer, so she wasn't aware of this issue when she first shot these videos. So I have 10 videos with these issues I need to get back to her, hopefully issue free! I'm struggling as an editor because my last job I was using FCP and was working with videographers who knew what they were doing, so I've never faced such problems before. Plus I'm new to the Adobe software. Not a good combination. Please forgive me if I didn't give all the information you need. I will happily respond with whatever more information you may need to help me out!
~KTrouper

I wonder if you could do your edit ignoring any visual issues of the interlaced footage but keeping the different sources separate ( checkerboard edit Vid 1/ Vid 2 )
Lock it down then export the interlaced part of the edit as a Digital Intermediate.
Maybe Export the other source as well to the same codec. DI
Bring them back together in a New Sequence. You wold have to deal with the black spacing.

Problem storing two identical qualifications with different proficiencies

Similar Messages

Maybe you are looking for