Problem surface pro 2, windows 8. brush pressure is not working in Ps CC ,

problem surface pro 2, windows 8. brush pressure is not working in Ps CC

Este foro es un Foro de Usuarios en español.
Puedes probar a explicar tu problema con mayor detalle.
Indica por favor detalles de hardware
(Podemos estar familiarizados con Photoshop, pero no con tabletas híbridas)
Concretamente, cómo utilizas el pincel de presión?

Similar Messages

  • Photoshop CS6 Brush pressure sensitivity not working on the Microsoft Surface Pro.

    I have just purchased a Microsoft Surface Pro in anticipation of running Photoshop on it.  I installed Photoshop and tried to do some sketches.  I created a new file and started sketching.  I Immediately felt like something was wrong.  I checked my brush settings and saw the pressure sensitivity was not available.  Everytine I tried to turn it on it was marked with an exclamation point. 
    Does anybody know if Adobe is supporting the new pressure sensitive pen from microsoft, or if there is some sort of setting that I am missing?  I have tried sketchbook pro 2011, and that works amazingly well with the pen.  I hope someone can help me along here, because if this tablet can truely run photoshop, it would be a Game Changer.

    Just curious.... has any of you tried the shape dynamics in photoshop and turning on pen pressure?
    and in illustrator to modify the size to pressure and variation to maximum? (and of course select that brush preset that you just modified and draw with it using SHIFT+B for blob brush or B for regular brush)
    I am also interested in purchasing a Surface pro so please report if this helps.
    what I recently discovered in other forums is that Sketchbook Pro works flawlessly in desktop mode. Sketchbook Express in the APP mode doesn't support pressure yet.
    there is no official confirmation that the surface pro uses a wacom digitizer, however a few artist friends of mine have gone to the microsoft store... brought their own wacom pens (cintiq 15x pen - older models that works with general tabletpcs) and the pro recognized it. which means that it is a wacom digitizer. it wouldn't make sense if a wacom pen works with a different digitizer board like N-trig.
    also read in another forum about adobe using wintab and windows 8 wintab drivers are not there yet.
    anyway... I'd be glad to know if this works or not
    thanks!

  • After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

    After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
    This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
    I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
    Kindly solve this issue ASAP.
    Shailendra Gupta
    <edited by host>

    You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
    Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
    If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

  • I have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

    i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

    Abdussalam.A,
    you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

  • EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best.
    I have the new Windows Vista but iTunes does not work good.
    And I have to use it, to manage my music on my iPod.
    When there will be a Vista compatibles Version of iTunes??
    And when will come an 64-Bit Version?
    Thanks for Help,
    Karsten

    iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
    The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
    Anyone else having a problem with VISTA recognizing burnt media?

  • Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

          
    I originally posted this question here:
    answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
    and was asked to post it on this forum...
    I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
    it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
    up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power.  I have finally gone back the previous version 9926, which has its issues but no where near as bad
    as not having any network connectivity!  Does anyone have this issue and a workaround? 
    Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

    Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
    this... Thanks!
    I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
    (but I suspect not just the only culprit) in this above mentioned problem...
    10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
    is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
    laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
    or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
    I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop. 
    Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
    Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
    that has happened with the Cisco software install attempts under 10041.
    Another note: CISCO Anyconnect also has the issue.

  • My Macbook Pro (bought in 2013) function keys are not working

    My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
    Please can you help?
    Thanks
    Kat

    Some might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
    I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
    Clinton

  • Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

    Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

    Try troubleshooting the Safari .plist file.
    Quit Safari.
    Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
    If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
    If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

  • Brush Tool is not working with Layer Mask

    Working with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?

    Also, do you have any Selections active - maybe hidden?
    When you have your Layer Mask's Channel active, do your Colors change to black and white?
    Good luck,
    Hunt

  • My macbook pro mid 2009 keyboard and trackpad is not working.

    My macbook pro mid 2009 keyboard and trackpad is not working. it was working perfectly fine a week ago and it stopped. i tried using a external wireless mouse and keyboard but only the mouse will work!! They keyboard lights up when it is booting up but when i try to sign in, nothing types or the mouse wont work. i am fine if the mouse doesnt work because i can use an external one but can someone please help me?!

    The best option is an appointment at an Apple store genius bar and have the technicians diagnose the problem.
    Ciao.

  • Windows 8.1 store is not working

    my windows 8.1 store is not working after the installation the windows i have tried the cmd method to overcome it but not working i have also tried "WSreset.exe" but still nothing happen 
    another tile like 'people', 'skype' are woking well but not windows store .please help me.
    ankit singh

    Hi,
    Is there any error message when store opened failed? Please try to use APP troubleshooter to fix this problem for test.
    APP troubleshooter:
    http://go.microsoft.com/fwlink/p/?LinkId=268423
    Roger Lu
    TechNet Community Support

  • "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

    Turned my Dell running windows 7 off 2 days ago. Turned on today.  Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
    All my albums are there but won't play.
    Deleted Itunes and reinstalled. Same as before.
    Any ideas ??

    Hey MrCurwen,
    I was able to find an article that included the same error message you're experiencing:
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    Cheers,
    David

  • Reopen All Windows from Last Session is not working

    The option Reopen All Windows from Last Session is not working, is there any other way to recover the tabs from my last session?
    Last night I fell asleep and my friend shut down my laptop.
    When I woke up in the morning I couldn't restore my last session which had several tabs opened for my research.
    I don't know the exact date when I found them, so I haven't been able to find them in History either.
    I've looked around on the internet, but haven't been able to find anything that helped me out.
    Hope you can help me! Thanks.

    Restart your Mac.
    Check the box for:  Reopen windows when logging back in
    Then check History >  Reopen Windows from Last Session

Maybe you are looking for

  • How can I do a Workflow in different site???

    Hello, I am a new user in this tool Sharepoint. I have a one aplication with three blog site, one in english language, another in french and the last in spanish. And my question is the next: Is possible to create a list with three fields for the titl

  • Can I move files from one hard drive to another without replacing/duplicating existing files?

    Long story short, my work purchased a Macbook Pro and copied all of my files from my iMac to my new Macbook Pro. I've had to work on my iMac before my laptop was fully ready and now I need to transfer more files over to my Macbook Pro. Is there a way

  • How to organize in iPhoto 6???

    I need help organizing my pictures in iPhoto 6... When I need to send a picture or just browse in my directory of pictures I have to take a guess in which folder the picture i'm looking for is in. For example I have a "Modified" and "Originals" folde

  • Final Cut Pro Files and the Internet

    I am going out of town, so I need my workflow sent to me via internet. The file size in fcp ends up being around 9gb. I work for a non-profit so buying expensive networking equipment isn't an option, unfortunately. I thought I could use Mobileme. Can

  • Problem with a GP tutorial

    Hello, I have a small problem with this tutorial: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/609c52aa-8f0a-2b10-d59e-b5248a7ac1e2 I've actually, been able to do the whole tutorial, but i have some issues when i try to change