Problem SXI_CACHE

Dear all,
I have problem about the cache in PI 7.1
In fact, I have two mandants. 001 et 100. I need to develop on mandant 100.
In SLD, all BS and TS are configured for mandant 100. But, in the directory (after refresh SLD data cache), I have a error (Not Business system found for mandant 001). I checked the SLD and all is ok (for mandant 100 only!! )
After searching, I found a cache problem in SXI_CACHE (mandant 001) => Not BS found.
All is green in mandant 100 (cache content is up-to-date).
When I change in the SLD the mandant for PI Integration server (100 => 001), I don't have error anymore. All is ok.
I don't know why the directory checks the mandant 001 whereas the SLD is configured for the mandant 100.
And I changed the mandant in the exchange profile.
I need help please.
Thanks.

Hello sebast_60
The note #940309 Change PI default client after NW 7.0 Installation, outlines the configuration steps required to change the default client of a PI system. Double check all these steps have been successfully completed.
Regards
Mark

Similar Messages

CacheRefreshException: Connection to system RUNTIME using application...

Hi experts,
I have a following problem: SXI_CACHE is not functioning with following message.
com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system RUNTIME using application RUNTIME lost. Detailed information: Error accessing "http:<xihost>:80xx/run/hmi_service_id_fresh_swcv/int?container=any" with user "XIDIRUSER". Response code is 404, response message is "Not Found".
I have checked users, passwords and roles - everything looks ok. RFC connections too. It is about Netweaver 2004s (SP09) Java stack restart. I tried many Sap notes, but have not found nothing eficient.
It seems to me, that port shall be in range 5xx00 not 80xx. Manually, I have tried 5xx00 port in broser and it works.
Integration Engine (ICM) port was in range 5xx00 which I have changed to 80xx (in TC SMICM, Exchange profiles and SLD) according to recomendations. All this started to happen after J2EE Stack restart.
Why is it pooling wrong port ?
Regards
Jurica

FYI
In mean time we found the problem:
On of exchange Profile parameters (com.sap.aii.connect.integrationserver.httpport) was set to wrong port - to 80xx instead of 5xx00. After Java Stack restart from SMICM, everything was ok again.
So, this is actually Java Stack port parameter, com.sap.aii.connect.integrationserver.r3.httpport is ABAP Stack port.
Regards
jurica

Problems in SLD and Cache refresh (SXI_CACHE).

Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current client

Hello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz

Problems in SXI_CACHE Refresh

Dear Experts,
I am facing Cache refresh problems in PI 7.0 :
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says " No Business System for ABC Client 100 ". where ABC=SID.
My question is : Is this issue related to BASIS Team or PI Developer Team? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_MXD
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current client

Hi Phanikumar,
This problem is related to the Basis. PI Developer is not responsible for that.
First of all make sure that you have generated the Business system Properly.
Just go to RZ70. Enter the required information and generate the Business system.and check if you can see the Technical System corresponding to Your Application system in SLD.
Just varify in SLDCHECK if you can see all the BS available in SLD.
When Applcation system try to get its own business system it uses the report which fetches the data from table "lcrt_clntcache" which get automaticay filled when you create the corresponding BS.
Just Check if you can see the entry in this table.
If not then Run the report LCR_CLEAR_CACHE which will refersh the cache and again RUN SLDCHECK now table ""lcrt_clntcache" should get filled.
if you still face the problem then you have to upgrade your Application server patch. Just Check SPS of your Application server. Just check SAP Note 1034276.
Thanks,
Sunil Singh

Problem in SXI_CACHE ReturnCode 99

Hi Everyone,
We're encountering a problem in our Test box. The return code for one of our integration processes is still 99 even after activating it in SXI_CACHE. In our acceptance box and Dev box, the return code is 0. Everything is working fine for both the systems. The error is in the test box only (dev -> test -> acceptance). We have tried reactivating the whole SCV and transporting but it did not work. We have also tried reactivating the Integration process in ID, and transporting it but still no luck. We have also tried the various suggestions in the forum but we're still having an error.
The error message in SXI_CACHE is :
E    For http://xxx yyy there is already definition ZXI_PROXY_xxx
E    For http://xxx yyy there is already definition ZXI_PROXY_yyy
S    --- Translating step type 'RECEIVE' with ID '3' ---
E    No container definition available
S    --- Translating step type 'SEND' with ID '9' ---
S    --- Translating step type 'SEND' with ID '18' ---
Any suggestion is welcome.
Thanks.

1. make some dummy change to the IP in IB
2. if not works then re-import the IP in IB (delete and re-import)

SXI_CACHE problem

Hi all,
I am newly installed my XI server. It is in SP04. I am getting CACHE Error in SXI_CACHE...
Could anyone help me refresh cache contents. When in sxi_cache I execute 'start complete cache refresh' , the contents are refreshed . On clicking "error during last attempts" I see the following-
cl_http_client RFC_READ_HTTP_DESTINATION AUTHORITY_NOT_AVAILABLE
Could anyone please help me to solve this issue...
Vijaya

hi.. michal,
tq, very much... but still im facing the same problem..
a)in sxi_cache.. im getting error messages as "unable to refresh cache contents and error during last attempt to refresh cashe".
b) michal, im following the step by step procedures available in the PDF document "HowTo_handle_XI_30_Cache", in this during 11th step, when i clicked on refresh object, im getting an error
409 Conflict
http://sapxi:50000/rep/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=RM&type=MAPPING&guid0=&guid1=
c) and during 13th step, its asking for network password, i tried all the passwords (viz., when i logon to xi system im choosing client as 500, user sapuser, password india and for IR, ID and IS im using username as XISUPER and password :india). After 3 attempts, its displaying a message as
Logon failed
What has happened?
Call of URL http://sapxi:8000/sap/xi/cache terminated due to error in logon data.
Note
Logon performed in system DEV .
Logon performed for client 500 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
Error Code: ICF-LE-http-c:500-l:E-T:21-C:3-U:5-P:-L:7
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
plz.. help me...
vijay

Automatic cache refresh problem with SXI_CACHE in PI70 Sp09

Dear Friends,
We are facing problems with SXI_CACHE
ISSUE: Automatic refreshing is not done, evey time we had to manaully refresh it going to sxi_cache.
DETAILS
SERVER : PI70 SP09, running on Netweaver 2004S
RFC: Destination INTEGRATIOn_SERVER_HMI
TYPE : H
USER : PIISUSER-service user
Role : SAP_XI_IS_SERV_USER
prefix path: /dir/CacheRefresh
Service No : Http port No (configured one )
License : Valid license not temporary one.
we have configured as mentioned in Configuration guide, still we are facing problems
I searched the SDn got few tips , but that really didnt help to resolve the issue.
Finally we thought of raising this issue to SAP, before doing it i thought i could get some help from SDN.
Any pointers that could resolve this issue will be appreciated.
Regards
[email protected]

Hi Chandra,
Plz compare the below mentioned settings with you current settings in XI.
Go to SM59 and create
RFC Destination as "INTEGRATION_DIRECTORY_HMI"
Connection Type: H
Under Technical Setting TAB
Target Host: write the host name
Path Prefix: /dir/CacheRefresh
Service No: enter J2ee port no (e.g. 50000)
Under Logon/Security TAB
select Basic Authontication radio button
SSL select inactive
Under Logon:
Lang: EN
Client: enter client
User: XIISUSER
Password: *******
Under Special Option TAB
HTTP Setting:
HTTP Ver: HTTP 1.0
Compression: inactive
Compressed response: NO
HTTP Cookies: Yes (All)
After doing abobe, press the Test Connection button and accept all cookies and see what is the result. After this refresh the cacahe by sxi_cache.
Regards,
Sarvesh

Automatic cache refresh problem with SXI_CACHE

Dear Friends,
We are facing problems with SXI_CACHE
ISSUE: Automatic refreshing is not done, evey time we had to manaully refresh it going to sxi_cache.
DETAILS
SERVER : PI70 SP09, running on Netweaver 2004S
RFC: Destination INTEGRATIOn_SERVER_HMI
TYPE : H
USER : PIISUSER-service user
Role : SAP_XI_IS_SERV_USER
prefix path: /dir/CacheRefresh
Service No : Http port No (configured one )
License : Valid license not temporary one.
we have configured as mentioned in Configuration guide, still we are facing problems
I searched the SDn got few tips , but that really didnt help to resolve the issue.
Finally we thought of raising this issue to SAP, before doing it i thought i could get some help from SDN.
Any pointers that could resolve this issue will be appreciated.
Regards
[email protected]

Hi Chandra,
Plz compare the below mentioned settings with you current settings in XI.
Go to SM59 and create
RFC Destination as "INTEGRATION_DIRECTORY_HMI"
Connection Type: H
Under Technical Setting TAB
Target Host: write the host name
Path Prefix: /dir/CacheRefresh
Service No: enter J2ee port no (e.g. 50000)
Under Logon/Security TAB
select Basic Authontication radio button
SSL select inactive
Under Logon:
Lang: EN
Client: enter client
User: XIISUSER
Password: *******
Under Special Option TAB
HTTP Setting:
HTTP Ver: HTTP 1.0
Compression: inactive
Compressed response: NO
HTTP Cookies: Yes (All)
After doing abobe, press the Test Connection button and accept all cookies and see what is the result. After this refresh the cacahe by sxi_cache.
Regards,
Sarvesh

Problem with SXI_CACHE

Hi All,
I'm unable to do a cache refresh from trax SXI_CACHE. The two options 'Start Complte Cache Refresh' and 'Start Delta Cache Refresh' are disabled in SXI_CACHE. Also couldn't to the cache from Integration Directory.
Any inputs are greatly appreciated.
Regards,
Nazim

Hi Nazim,
This might help you
Call transaction SM58 to check the status of the refresh process.
If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.
In RWB component monitoring, we now have the option of checking whether the cache-connectivity is functioning correctly. This is useful when we are experiencing problems when updating the runtime cache. The system displays a separate window in which we perform the test. If no previous tests have been performed, the system displays a corresponding message. Otherwise, the system shows when and by whom the last test run was started, together with the result of this test.
To start a new test run, choose Start Test.
The system displays the first results of the test run. Since the whole test takes some time, we can update the displayed results if necessary.
To Update the displayed results, choose Refresh Display.
The overall result for each component is displayed as a green, yellow, red, or gray symbol. A green symbol is only displayed if both update steps for the runtime cache were successful, that is, they both have a green symbol.
Thanks & Regards,
Agasthuri Doss

Cache Refresh Problem in SXI_CACHE Transaction in new client 700

Hi Experts,
    We have installed and configured the new PI7.1 server and were checking its readiness by going through the Readiness Check Document. At one stage while we run the transaction SXI_CACHE in client 700 we are not getting the option of " Start Complete Cache Refresh" in highlighted mode. Thus we are not able to refresh the cache in client 700. But if I login in Client 001 and login using SAP* and run the SXI_CACHE I am able to see all the pipeline steps as well the option for complete Cache refresh and Adapter cache referesh is in Highlighted mode. The status is also green. Can somebody us in knowing where should we look into to solve this problem so that these option are available in the new client for refershing the CACHE.
Thanks
Regards
suk4023

Hi Soujanya,
    Yes we tried with the link given by you . we got the folowing error
403   Forbidden
SAP NetWeaver Application Server 7.11 / AS Java 7.11
Error: You are not authorized to view the requested resource.
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: No details available
Yes we tried by restaring the system too, but the status is same.
Any more inputs will be appreciated............
Thanks
Regards
Suk4023

SXI_CACHE - Integration Directory Cache problem

hi
im getting this on 001 but not xxx client.
I id post installation also. i switch client 001 to another.
while SXI_CACHE - Integration Directory Cache TC i can't see cache also manu option that adpter engine.
Thanks
Sachin

Check if the right client has been identifies as integration server in SLD and check right URL has been mentioned in SXMB_ADM.
VJ

Problem transaction "sxi_cache"

Hi,
I have created a new client 100, so when I use transaction "sxi_cache" und go to the menu bar "xi runtime cache" > start delta cache refresh and "xi runtime cache">start complete cahce refresh, so these both entries are disabled for the client 100. so how can I enabled these entries in the menu bar?
Thanks for your help.
Regards
Stefan

Hi..
can you try to set this a default client in profile ( RZ10).Do change the entries in exchange profile for the new client , if that is going to be your IS--...this might help and i am not sure...just a trail and error suggestion.:):)
Thanks
Gopal

Problem in SXI_CACHE

Hi all,
In SXI_CACHE, I am seeing two of my object without Repository Name and Repository Namepsace. I don't suppose this is correct. How do I rectify this.

You cant delete an object i suppose because the transaction is used to "analyze a cache" not edit its contents
regards
krishna
Message was edited by:
Krishnamoorthy Ramakrishnan

Error during sxi_cache refresh after upgrade 3.0 to PI 7.11

During sxi_cache we are getting the error
com.sap.aii.utilxi.misc.api.InternalErrorException: Internal error: Link from Communication Component | IP_NSP1007_001_PS020_BeoordelingOudeManager to object type "MAPPING" with role "IFOUT" is not permitted
where IP_NSP1007.. is an Integration Process.
we also getting the error when displaying a configuration object :
Original language Dutch for current object collides with permitted display or editing languages EN; contact your system administrator
regards meinhart Lingbeek.

Hi,
The problem is with the patch level after upgrading to PI 7.11. AS suggested by Hareen..Apply the latest patch (note:1344144). The problem will be resolved.
Cheers!!!
Naveen.

SAP PI Cache Problem

Dear all,
I am developing different scenarios with BPMs accessed by SOAP (Web Services) within SAP-PI.
I am having a lot of problems with some of the XSLT split mappings programs. What's happening is that we have developed various mappings and made changes to them and upon activating them it's possible that they are being incorrectly managed by the J2EE server cache e.g. wrong versions being kept in the cache. The consequence of this is that we obtain different results for the same data input.
Executing the services sequentially, with the same input parameters, we obtain results with different data in a random form that coincides with the different versions of the mappings that we have published to the server.
Could there be an error with the way the java cache works?
I am checking different issues regarding the SAP PI Caché manual ("How to Handle Caches in SAP XI 3.0.pdf"), but I cannot find the problem. Doing testing, I am getting in different moments, following errors:
1. This error occurs sometimes:
com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
I did all checks that came in the manual, but to no avail.
Thanks in advance.
Regards

Hi!
According to my Knowledge
1. BPM need to use in final case because it tooks lot of performance issues in RUN time because IN BPM while running your scenario the process is always switch from ABAP stack BPM Process Engine to JAVA Stack for executing the mapping whch you configured in the java stack and again it needs to swtich towards the Process Engine and finally again it needs to swtich towards java stack to ID part through Interface determintation step....
In going all these it takes lot of Load on server and suppose if it is handling very huge data defnitely you ill face performance issues.
2. Also I think there is some authentification issue while running it means defalutly even though u configured any adapter on your user id by default all those adapters run by using ADMINs authentifications check whether it was locked or some other problem.
3. Also check once CACHE thorugh SXI_CACHE and also u can check via RWB-->Cache Monitoring...
Regards::
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Mar 9, 2009 4:17 PM

Problem SXI_CACHE

Similar Messages

Maybe you are looking for