Problem sybcing movies

I'm having a syncing issue. I manually sync ATV and for some reason, the movies I have recently purchased directly on atv are not showing up in my itunes menu so I can't watch them on my imac. However, if I purchase on my computer and then sync the movie is on my imac and atv. what am I doing wrong? This has never been an issue before. I thought it might be because I recently bought an external HD and now store itunes on it but that would mean I should have problems syncing both right?

Sorry, the subject should say "Problem syncing movies"

Similar Messages

Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

You might find useful information in item D1 of Time Machine Troubleshooting.

Problem with movies imported from iPad3

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Problems downloading movies since upgrading to mavericks

Ever since upgrading to mavericks when it was first released, I have had nothing but problems downloading movies in iTunes. What normally would take no more than 30 minutes to download a movie and iTunes extras has now turned into waiting more than 3 hours with no less than 4 error messages saying iTunes cannot download the movie and I have to relaunch iTunes or reboot my entire system. It is getting quite annoying and I can't seem to find a solution.
Any help would be greatly appreciated.
Thank you in advance.

I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
This is not normal and needs to be fixed soon!

HT1390 Report problem with movie rental

I rented the movie "Hunger Games". After the download had completely finished I wanted to watch the movie in iTunes and had trouble, the sound was on and off, the picture sometimes blurry and interrupted.
How can I report a problem in movie rentals?

Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Problems importing .mov file

I am all of a sudden having problems importing .mov files from my camera in iPhoto '08. Can't get them to import in Image Capture either...On the import preview screen, all that comes up are empty "boxes". If I highlight one of the boxes, it shows that it is .mov file, the size of the file, etc. but if i try to do the import, iPhoto just locks up.

iPhoto does not like very large movie files for importing directly from the camera. If you get it on the desktop you should be able to import it. I've imported 200MB movies with no problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Problems importing movies into Keynote

I have been using Keynote for a couple of years (now using Keynote 08 on a MacBook running 10.5.5). I recently started having problems importing movie files into my Keynote presentations. I usually just drag a .mov file and it plays with no problems, but lately when I do this it doesn't appear on the Keynote slide and when I play the presentation I get only audio w/ no video. I tried importing the files to quicktime and exporting them again to be sure they were in the correct format. This seemed to work a few times, but now that isn't working either. Any suggestions?

I'm having what sounds like the same problem. I have Quick Time video from a Flip Cam that I want to use in a KeyNote presentation. I added the movie successfully at first, but when I opened the file to continue work, it appeared as a black box. It has sound, but no image. I can see it ok in the navigator. I've searched the forum for answers, but haven't found anything that works yet.
Does the display setting have anything to do with this? One of the computers I work on has the display set to use with a LED projector. Thanks

Anyone having problems downloading movies to a PC?

Is anyone having a problem downloading movies to a windows 7 PC?

Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
Did you remove all Apple related software prior to the install? Removing iTunes, QuickTime, and other software components for Windows Vista and 7

TS1424 Has anyone had a problem purchasing movies in the last week? I get a message say that my purchase was not complete and to contact itunes support.

Has anyone had a problem purchsing movies from iTunes in the last week? Everytime I try to buy a movie or TV show I get a message from iTunes saying "You purchase was incomplete please contact www.apple.com/support/iTunes/ww/." which is no help, still waiting for help!

If you haven't contacted iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Problems playing movies from Time Capsule

I am having a problem playing movies from my Time Capsule to my Apple TV. I can make them work but have to go through the following process: I have to play the movie through iTunes and then stop it, and then go play the movie on apple TV. I have to do this each time I want to watch one of the movies. Any thoughts on this issue?

Hopefully this information will help. I have an aiport extreme connected directly to my Cable Modem. I then setup the Time Capsule to extend the network updstairs. I have everything running on 802.11n. Wireless connection is great and I get about 13-14mb download speeds when I do a speedtest.
I must say though, copying data to the Timecapsue via wireless is slow...
I checked my apple TV this morning, and the first movie I clicked on worked great, so did the second one, then I tried a third and got the following error: "The Selected Video could not be played. The Format was not recognized"
Then I went back to play the original two that worked, and they now gave me the same error... it almost looks like it is looking connection to them, or synching or something..

Problem renting movies with Apple TV

Having a problem renting movies using Apple TV with Comcast cable and Netgear gigabit wireless router. After selecting a movie to rent and clicking "rent" a message appears: "Accessing iTunes Store", after some delay a second message appears stating an inability to connect to iTunes store, try again later. This issue is intermittent. At any given time a movie can be rented and streamed, but more than 50% of the time, the rental fails.

We're not really sure as yet - there certainly seem to be no comments on subtitling as a feature.
AC

Problem with .MOV

Hi everyone,
I'm having an issue with .mov files in After Effects. Here is my system:
Windows 7 64 bits
Sabertooth X58
Intel i7 920 @2.67GHz
Nvidia GTX 640
12 GB Corsair DDR3
Adobe CS6
The problem: Some .MOV files I play in After Effect look corrupted:
When I play them, it they make my computer bug until it freezes or shows a Bluescreen. But the files aren't corrupted as they play without problem on VLC (independant from Quicktime). The problem also happens in Premiere and even Quicktime (Quicktime version: 7.7.4 (1680.86)). I can work without problem with some .MOV so I checked the codec of the different files. "Apple PNG" and "Apple Photo JPEG" are making my system crashing. But I can play, work with or export "avc1" without any trouble.
The other day I actually noticed a similar problem in Nuke. I worked with another .mov file (avc1) without any issue but once I tried to render it to a .MOV file (Apple PNG), the rendered files had the same kind of corrupted-looking (lines and sometimes green screen). When I export it in a normal png-sequence there was no problem.
Already tried but didn't solve:
- updating to last graphic drivers
- reinstall Quicktime
- reinstall an older version of Quicktime
- updating DirectX (I already had last version)
- try with or without CUDA in After Effects
- try to load the .mov from another harddisk
- set Quicktime to "Safe mode (gdi)" (doesn't help for After Effects)
- try to convert the file to a png sequence in Quicktime (crashed after rendering a few frames)
Has anyone an idea?
Thanks in advance!
Sakat
#update 1:
- Tried to convert a ".mp4" file to an ".mov Apple PNG". Then I convert it again to a ".mp4" with Wondershare Video Converter (the errors do not happen with that software). I can be play without problem on VLC that last ".mp4".
- Tried to play an ".avi" file in Quicktime: system crash.
- Tried to preview an ".mov Apple PNG" in half resolution in AE: system crash.
- Tried to export a ".mov Apple PNG" to an ".AVI" and an ".mp4 H264": It exported but the files aren't playable in any soft (including VLC and Wondershare Video Converter). I did the same process to a ".mov Apple PNG", it freeze Windows.
Message was edited by: Sakat

Today I tried to uninstall all Apple softwares, clean the register with CCleaner, delete Apple folders in Appdata (local, locallow, roaming), Flash the bios of my motherboard, reboot and then only reinstall the last version of Quicktime. And I tested all the advanced settings in Quicktime: safe mode (GDI), Directdraw acceleration, Direct3D acceleration. No result... I could play a "avc1 .mov" in Quicktime. That's all.
Last month I formated and reinstalled Windows. Before formatting I had no problem with these files. I didn't change anything in the hardware. So there must be something missing/corrupt in some codecs used by Quicktime or the way Quicktime renders these codecs.
I searched but couldn't get any result for a link to download a Windows version of ApplePNG codec...
Is there anyone who has an idea because I'm really getting stuck..

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

A problem downloading movie

i am having a problem downloading movie that was filmed with a JVC camera in hdv format 720p 50fps.
the movie was filmed on a tape, not directly to hard disk, and it is not being recognized on my dsr-15 machine.

>movie was filmed on a tape... hdv format
Legacy Driver and Capture http://forums.adobe.com/thread/869277
- And a Picture http://forums.adobe.com/thread/727755
I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm
Also... downloading is from the internet to your computer, so I thought that was your problem, from your title
Glossary of Terms http://forums.adobe.com/message/2276441 to help with communication

Problem sybcing movies

Similar Messages

Maybe you are looking for