Problem syncig Photo ID's with Windows Contacts - Also want to Sync...

I have an iPod Classic, 40 gig... I would LOVE if someone knows how to sync Windows Calendar to iPod Classic. I do not have Outlook. I do have my contacts loaded, but it does not transfer my photo ID's. Anyone know how to fix this?

Sign out of iCloud Control Panel on your computer, restart the machine, then sign back in. Your photos should start syncing shortly.

Similar Messages

  • An extra group 'on my iphone' appeared after i sync with windows contact via itunes

    I am having this problem which appears to be happened after i sync with my computer. In the contact group, there is an extra group 'on my iphone' appeared after i sync with windows contact via itunes, and even though now i stop syncing already, the group is still there. Can anyone here give me some suggestion on how to remove this group permantly, i not just wanted to remove the contacts but the entire group form appearing on my iphone. Thanks.

    Is the app compatible with the iPhone (e.g. it's not and iPad-only app), and do you have the relevant iOS version on the phone ? Or do you have Settings > General > Restrictions > Installing Apps set 'off' on the phone which will stop new apps being installed ?

  • Sync iCloud with windows contacts

    I am upgrading from MobileMe to iCloud in windows 7, w/ MobileMe I sync with my Windows contacts not with Outlook contacts (I can't stand bloated outlook app).  I don't see this option in iCloud - does this mean Apple is not supporting syncing iCloud with Windows Contacts?  If so I am very disappointed in Apple.
    thanks,
    dan

    dbperson wrote:
    I am upgrading from MobileMe to iCloud in windows 7, w/ MobileMe I sync with my Windows contacts not with Outlook contacts (I can't stand bloated outlook app).  I don't see this option in iCloud - does this mean Apple is not supporting syncing iCloud with Windows Contacts?  If so I am very disappointed in Apple.
    thanks,
    dan
    You're correct, Outlook is the only supported client for Windows, and I agree with your assesment of Outlook. There is an usupported alternative in eMClient, which does look a lot like Outlook but is simpler and snappier.
    Setup is manual, mail is easy as are contacts and calendars, if you want to try it post back and I'll look for the server address information.

  • Does hp photo creations work with windows 8?

    I was wondering if HP Photo Creation works with Windows 8?  I have installed Windows 8 and when I went online to see if this program works with Windows 8, I was not sure if it does.  Can anyone tell me?

    I understand you have a question regarding HP PhotoCreations and Windows 8.
    I take it this is the site you came to.  The site doesn't really list any system requirements that I was able to find.  It looks like it is a free program, so you could download and install it to find out.  If it doesn't work, you could just uninstall it without issue.  You could also try installing it in compatibility mode.  If you want to try compatibility mode, you would right-click the downloaded install and select troubleshoot compatibility. 
    I don't have access to a Windows 8 unit at the exact moment, but I'll return with the results if I am able to get my hands on one. 
    Let me know if this answered your question. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HT3906 need help - all my contacts gone, by sync with windows contacts

    what can i do if i already sync my contacts with windows contacts, and i have windows 7... where can i find the file now?

    http://support.apple.com/kb/HT1497

  • 8110 Sync with Windows Contacts?

    Hello all, I apologise if this has been asked before
    Is there any way to sync the address book on the 8110 with Windows Contacts? (Vista Home Premium)
    and/or with Contacts in Outlook 2007
    and/or with Plaxo?
    Thanks!!

    Read this link
    http://supportforums.blackberry.com/rim/board/mess​age?board.id=8100&thread.id=12042
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • New PC with Windows 8.1 trying to sync phone but receive following error message and don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.

    In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
    I would greatly appreciate help with this matter.

    See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

  • HT1369 Brand new computer with Windows 8.1 will not sync with iPod Classic 120G.  Windows does not recognize anything but iPod Touch?  Is there a simple sloution?

    Brand new computer with Windows 8.1 will not sync to iPod Classic 120G.  Windows does not recognize anything but iPod Touch?  Is there a simple solution.  Diagnostics have run and failed to point to a fix.

    Might be worth tearing down the whole iTunes install and starting over...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Blue screen problem on Satellite A350D-20E with Windows 7 - PART 2

    My laptop came back from guarantee problem solving with a new VGA card.
    All the same after a couple of weeks it started to crash all over again. I suppose it is a software problem.
    Error message: Bluescreen
    The computer starts to have graphic problems, some points on the screen become black, for example around the mouse arrow, and then the black points extend, the computer crashes and starts again automatically. It happens now 2-3 times a day. The computer trys and look for a solution on microsoft website but it cannot find it.
    Some days ago I re-installed the drivers of the ATI Mobility Radeon HD 3650. Looks like there is no new version than 8.634.1.0. But all the same I re-installed it. The driver was on this Toshiba website. Unfortunately the problem was not solved. After 2 days without problems, the problems started again to present with the same frequency (and violence).
    Can somebody help? Maybe is there an higher version of ATI mobility Radeon? But on the website of ATI mobility radeon supplier looks like there is no compatible version.
    Anyone any other idea?
    I can provide the following information
    Probleemhandtekening (problem signature):
    Gebeurtenisnaam van probleem (name of the happening): BlueScreen
    Versie van besturingssysteem (version of control system): 6.1.7601.2.1.0.768.3
    Land-id: 1043
    Aanvullende informatie over dit probleem (complementary information about this problem):
    BCCode: 116
    BCP1: 86729008
    BCP2: 92A44B86
    BCP3: 00000000
    BCP4: 00000002
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1
    Bestanden die helpen bij het beschrijven van het probleem (files that help to describe the problem):
    C:\Windows\Minidump\011712-18236-01.dmp
    C:\Users\....\AppData\Local\Temp\WER-52697-0.sysdata.xml
    Taurinella

    Here the dmp file with the debugger.
    I am afraid is an internal cable brake.
    Error message when the computer crash:
    PXE E61 media test failure check cable
    The crashes are more and more. I do not have crashes in safe mode with internet possibility.
    Anyone an idea? Otherwise I have to send the laptop back to the Toshiba warrantee assistance. The only think is that they need 6 weeks. I cannot wait 6 weeks!
    Taurinella
    Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [E:\tijdelijk tv series\bluescreen problem\013012-20685-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
    Machine Name:
    Kernel base = 0x83456000 PsLoadedModuleList = 0x8359f4d0
    Debug session time: Mon Jan 30 13:47:39.724 2012 (UTC + 1:00)
    System Uptime: 0 days 0:34:20.737
    Loading Kernel Symbols
    .................................................. ...Unable to load image Unknown_Module_00000000, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for Unknown_Module_00000000
    Unable to add module at 00000000
    Loading User Symbols
    Loading unloaded module list
    ......Missing image name, possible paged-out or corrupt data.
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 116, {8656c510, 91c24b86, 0, 2}
    Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
    Followup: MachineOwner
    0: kd> !analyze -v
    * Bugcheck Analysis *
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: 8656c510, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: 91c24b86, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: 00000000, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 00000002, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    +61d02faf00deddc4
    91c24b86 ?? ???
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT: 1
    BUGCHECK_STR: 0x116
    PROCESS_NAME: System
    CURRENT_IRQL: 0
    STACK_TEXT:
    WARNING: Frame IP not in any known module. Following frames may be wrong.
    8357dc98 834d637f 8a45a768 8358a380 83580c00 0x90bda3f6
    8357dd20 834cde0d 00000000 0000000e 00000000 nt!PoIdle+0x524
    8357dd24 00000000 0000000e 00000000 00000000 nt!KiIdleLoop+0xd
    STACK_COMMAND: kb
    SYMBOL_NAME: ANALYSIS_INCONCLUSIVE
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: Unknown_Module
    IMAGE_NAME: Unknown_Image
    DEBUG_FLR_IMAGE_TIMESTAMP: 0
    FAILURE_BUCKET_ID: 0x116_ANALYSIS_INCONCLUSIVE
    BUCKET_ID: 0x116_ANALYSIS_INCONCLUSIVE
    Followup: MachineOwner

  • Performance problems on a Oracle 11G with Windows 2008 64bits.

    Hi everyone,
    I have noticed that our db is going low and low every week. My server has 16GB RAM and 10GB are dedicated to the Oracle database, this is a 11.2.0.1 with Windows 2008 R2 SP1 64bits. I like to know acording to the nexts values what you guys recommend to adjust in the init.ora:
    orcl.__db_cache_size=5402263552
    orcl.__java_pool_size=33554432
    orcl.__large_pool_size=33554432
    orcl.__pga_aggregate_target=3657433088
    orcl.__sga_target=6878658560
    orcl.__shared_io_pool_size=0
    orcl.__shared_pool_size=1308622848
    orcl.__streams_pool_size=33554432
    *.memory_target=10511974400
    *.open_cursors=5000
    *.optimizer_mode='RULE'
    *.processes=300
    Acording to the memory target on how values can be increased the processes, pga_agregate_target, etc.
    Also we have problems related to the bug Bug 9593134 that “Connections to Oracle 11g are slow and can take anywhere from 10 seconds to 2 minutes.” there is a fix on linux by removing the dns names on it but anyone have experience on windows platforms?
    Thanks for all and sorry for my english.
    Regards.
    Arturo.

    Regarding the long connection times, have you tried using network packet capture software (such as Wireshark) to determine what the client computer is doing when a connection attempt is initiated?
    The Oracle Database time model statistics, along with the system wide wait events may help you diagnose the non-connection related performance issues (you should not just look at the statistics, but instead capture the current values, wait a period of time, capture the statistics again, and compare the changes in the statistic values). A statspack report might also help you - but a 10046 trace at level 8 or 12 is more appropriate if you are able to identify a couple of sessions that experience performance problems.
    I do not suggest just blindly modifying parameters, although I am curious to know:
    * Why the session level parameter OPEN_CURSORS is set to 5000 - do you expect a single session to hold open 5,000 cursors?
    * Why are you using the deprecated RULE based optimizer?
    * Why is the MEMORY_TARGET parameter used when the SGA_TARGET and PGA_AGGREGATE target are specified?
    Charles Hooper
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Contacts sync with windows contacts ignores "iPhone" numbers.

    Was sync'ing contacts through iTunes today and noticed that any phone numbers on my iPhone that were classified as "iPhone" (as opposed to mobile, home, work, etc) are dropped on my windows contact card.  I have to change them to "Mobile" to get them to sync to the PC. 
    Anyone else notice this?  Is there a way to map "iPhone' numbers to a valid field in windows contacts?

    Thanks I thought I was the only who is trying to solve the same problem.

  • COM1 in use problem. Palm M130 synching with Windows 7

    Hi
    Thanks for reading this. Hope you can help me with this problem. 
    I have a Palm M130 which I have been using on Windows XP for many years.
    Have recently upgraded to a new computer with Windows 7 and now I can't sync or remove the Palm software.
    Everything I try I keep getting a message that COM1 is in use.
    I have a Windows Home Premier 64 bit system. I know this isn't compatable with this palm but have an IR adapter I would like to transfer the information to the computer with if only I can get COM1 open.
    Any help and advice gratefully received.
    Thanks in advance
    Post relates to: Pre 2 p102una (Rogers)

    You must install the driver for your palm on your new system.  I had to download it from the palm support page, the install from the cd gave me the same error message.  After I installed the driver there was no further errors and the hotsync worked. 

  • Printer driver problem for HP 7410 officejet with windows 8

    I have have posted on here before with no result so I am trying it again.  I have the HP envy laptop with windows 8 on it.  I am so far unable to install the printer drivers for my HP 7410 officejet. 
    I need help ..... I am stuck not being able to print and scan

    Hi alvafranco,
    I see that your question has been answered on your other post. I have included a link here for you http://bit.ly/1hp2hNG.
    Please let me know if you have any further questions.
    I worked on behalf of HP

  • IPad 2 cannot sync with Windows 7 machine but can sync with Mac Book Pro

    I connected the iPad to my Windows 7 machine straight out of the box and tried to register it for the first time. It showed up in the device list for the first 3 minutes and then disappeared altogether. Thinking this is just some small error, I started troubleshooting using this guide http://www.apple.com/support/ipad/assistant/itunes/
    http://support.apple.com/kb/HT2292
    after doing that 4-5 times, I still had not found a solution to the problem. I made sure that my computer had the Apple Mobile Device Drivers installed in it. After all my iPod can easily connect to iTunes, but not the iPad. There isn't a problem with the usb cable because I used the same cable on the iPod and it worked like a charm. The iPad gets recognized in the Device Manager as an Apple Product, but does not show up in iTunes at all. This problem has frustrated me quite alot. I also tried to use my friend's Windows 7 machine, but to no avail. It did not connect to his computer either. Finally as a last resort, I tried to connect it to a another friend's Mac Book Pro [iOS Snow Leopard], and like clockwork, it connected and showed up in his iTunes. This is what surprised and outraged me the most. After spending 5-6 hrs troubleshooting the connections on my Windows 7 machine, uninstalling and reinstalling applications, drivers and finally the OS itself, this iPad connects seemlessly to a Mac Book within 1 minute. I could synchronize data, songs and the like on the Mac Book, but I can't even get this iPad to show itself on a Windows 7 machine. I am truly at my wit's end with this problem. Could anyone please help me with it? I would surely be grateful.

    Here is my statdard reply, most of which you have already done. You may wish to try the others!
    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/
    https://discussions.apple.com/message/17579027#17579027tr

  • I want to upgrade the 500gb HDD to an SSD on an S230u with windows 8 but want clone the drive

    I want to upgrade the 500gb HDD to an SSD on an Thinkpad Twist S230u with windows 8 but don't want to lose the data and programs installed on the drive and have to start over. I tried to clone it but no software could do it. I tried acronis and EasyToDo. I was able to clone it with a duplicator but it wasn't bootable. Am I to assume that what I need to do is the following - 1- Create the recovery media on a 32gb usb stick. 2- back up the drive using Acronis (or other) 3- Physically replace the drive 4- boot to the USB Recovery Media and bring the system back to it's original state out of the box but with the SSD Drive. 5- Use Acronis (or other) to restore back up made of the 500gb prior to removal. Thanks in advance! Scott Fischer

    Before you start cloning your HDD with acronis, you have to prepare the SSD:
    at first: connect your SSD with USB to your notebook and
     1. Start CMD.EXE as Admin
     2. type: "diskpart"
     3. type: "select disk x " x = Letter of your SSD
     4.  type: "list partition" the drive should be unformatted
     5.  type: "create partition primary align=1024"
     6. type: "active"
     7. type: "format fs=ntfs" --> wait some minutes
     8. type: "assign letter=x" --> For example "x"
     9. type: "exit"
    Start acronis true image 2013 (trial version)
    select "Backup" without empty sectors
    you can select any partitions, so also the the invisible lenovo backup paritions
    The Backup can be "Restore"-d to the SSD, incl.  GPT (MBR like in UEFI Systems)
    After all, the SSD is ready to use. Booting on USB gives here a blue screen. I tought it was my fault. It isnt. You can build in the SSD into your SATA Port and Windows 8 will boot very well.
    Sorry for my bad english

Maybe you are looking for