Problem: The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll, Problem: The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll
Problem: Every time the laptop is turned on, this message pops up:
The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll
Could someone please tell me if they have had the same problem and how they fixed it? Thanking you in advance.
Sorry to inform you, that this is the iPod Classic Community forum, perhaps it would be best if you post your issue with the Microsoft Windows forum, or whatever software that is giving you this problem, but if it is iTunes try
https://discussions.apple.com/community/itunes/itunes_for_windows
Havea nice day!
Similar Messages
-
Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.here is link to the apple product feedback website:
http://www.apple.com/feedback/ -
Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?
jag157 wrote:
"I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
Superb advice R&W! My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1). Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me. Thank you so much; this will save hours of further fruitless searching and phoning.
Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided. -
Can't install itunes - "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run."
Using Windows 7Hi Acedrvr48,
I found an article that explains steps to take if you are having trouble installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
I hope this helps!
- Ari -
At the very end of installing iTunes 11.1.1.11 a window appears: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." Available choice is click "OK" then "Finish" and install has then failed.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU, go to Control Panel:
XP - Add n Remove Programs
Win7/Vista - Programs n Features
Highlight ASU, click change then Repair. -
I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank uClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
== Operating system ==
windows XPIf you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]
-
Quite the trial to sign in to freaking Apple support. I apparently made an account with my primary e-mail, but damned if I can recover the password, apparently I don't know my own birthday. So I had to make a new account with another e-mail, and even when I thought it was done, no, I had to fill out more information before I could get to this screen. You won't let me ask for tech support from your message board without my mailing address? Then my completely inoccuous user name was rejected for containing banned words. Lemurs and cats are profane now, what? This is why I hate computers.
Anyway, I've got Mac OS X 4.something, can't check because it is shut down, and I already described my problem in the subject there before I got dragged back into account creation. I searched several places for answers but all I can find are discussions about double beeping at startup (even when excluding the word "startup" from search results), while my double beeping started all of a sudden when the computer was in use. The beeps were certainly less than a minute apart. What happened? What do I need to do about it? Is it safe to start the computer up again? Fortunately my files are pretty much all backed up.I don't know if we are experiencing the same problem, but this is what I did and it seemed to work for me so far.
Before anything I had to hard restart my laptop. hold power button until off then turn back on.
In Finder click on Go, then click Go to Folder. in the dialogue box type
/var/db/crls
In that folder there are two files that you need to move to the trash
crlcache.db
ocspcache.db
You will need to type in your password to move these to the trash.
Restart your computer and then Empty the Trash. It is very important that you empty the trash afterwards. I forgot to do this the first time and I had to restart the whole process. It has been a few days and I have been without any problems.
I am not claiming this process to be my own, I found it on another discussion thread and it worked for me. I don't have a link to it because I had to use someone else's computer and had no luck trying to find it again. This is the procedure I followed, I do remember it well and I wrote down the steps because I had to do it twice and got tired of combing through all of the websites I have searched looking for a fix to my problem. Hopefully this helps, and try it at your own risk of course.
Let me know if you try it and it works or not, good luck. -
Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work. -
After my last itunes update, I cannot play my music on my PC. I get an "original file could not be found message." Has anyone else had this problem?
If you post back the two paths I may be able to suggest an easy fix
(that would not have created duplicates).
Oh well...
Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls, such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2 -
Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
This is with CR installed on 64 bit.
Thank you very much for any assistance with this problem,
KrisHi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
I have an original iPad running 5.1.1. It has started throwing me out of safari to the point it is now unusable. Have tried everything including full restore but problem persists?
Try a few things:
First, try double tapping the home button. You should see a row of apps at the bottom; these are your recenty opened apps. Hold your finger down on any of the icons until they start to shake, and a red minus() appears. Tap the red minus for each app. This will close the app, not delete it. If you have too many apps open, this can cause crashes.
If it still crashes, try the basic troubleshooting steps here:
Basic Troubleshooting Steps for iOS
(Note that I am a representative of the organization for the above link, which is not endorsed by Apple) -
Object library invalid or contains references to object definitions that could not be found problem
Hello,
Yesterday I got the following error on the server: "object library invalid or contains references to object definitions that could not be found problem".
I found this documentation, followed the steps and all was OK on the server:
http://support.microsoft.com/kb/2703186/en-us
https://social.msdn.microsoft.com/Forums/office/en-US/e94f2fc3-71f1-4dad-bbf1-37f906e28e8e/object-library-invalid-or-contains-references-to-object-definitions-that-could-not-be-found?forum=exceldev
Our server is used to do batch processing for refreshing our excel's. This morning, after the excel's got refreshed on the server, I've got this error on the
client computers (everything works fine on the server computer). I did the steps above on the client computers, but the problem still persists.
It looks like there is a difference in version between server and client.
If I do the refreshing on the same computer there is no problem. But when the server does the refreshing and I try to open it on a different computer, I get this error.
The security update has been removed from the computer, but I can't use my excel's anymore.
Does any one have some advice for me?
Best regards,
WouterHi Wouter,
Thanks for the further explaintation.
According to the description, the issue seems that the Workboook on the client side(with lower Excel version) couldn't run the VBA after it opened by server(higher version Excel application).
If I understood correctly, that sounds that the issue is relative to the specific version of Excel product or the updates.
I suggest you contacting Microsoft support to raise an incident so that our engineer could work closely with him to identify the root cause and resolve this issue as soon as possible.
If the support engineer determines that the issue is the result of a bug the service request will be a no-charge case and you won't be charged.
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'
Please help...need to get newest update so I can activate my new IPhone4. ThanksThat suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
Maybe you are looking for
-
How do you fix colored lines on Macbook Pro with Retina Display?
I have had my Macbook Pro 13" Retina display for over a year now, I recently opened it up and there were several green and blue lines running down the screen. When I apply pressure to the bottom of the screen, where the black border is, some of
-
How to call Generic Page flow from jsp
Hi All, I have some links in my home page(jsp file).Based on user's selection, i need to show another JSP page using pageflow(JPF). thanks in advance vandana
-
TRANSFERRING MUSIC FROM IPOP TO PC
I had a hard drive crash and I lost all my dowloaded music from I Tunes library. I am trying to determine if there is a way to transfer my music collection from my nano to my new pc (Inspiron 531 deskstop). I shudder at the thought of re-loading 75 C
-
Cannot connect to network in Solaris 11
I want to install Solaris 11 Express on my x86 system. I'm facing network driver problems. I've 3 network cards: *1. Intel(R) 82579V Gigabit Network Connection* In Device Driver Utility, This device is displayed as Ethernet controller, Driver is UNK
-
I am new to Organizer and am having trouble loading photos from iPhoto..About 1/3 of them load.
Some of the photos are taken with camera and some with phone. Please help. RubbyRub